* Explore: Remove datasource testing on selector
- datasource testing gets in the way of fast query iteration: switching
between datasources can take seconds
- it should not be explore's duty to test datasources in the first place
- removed the concept of datasourceError in Explore, should not be its
concern
- datasource erorrs will express themselves in query errors just fine
- connection errors are still bubbled up
- removed reconnection logic from explore, should not be its concern
- missing labels in loki are still "visible" via an empty label selector
- Loki and Prometheus treated connection errors differently than other
datasources, making sure to pass through the original error message
* Show datasource error in query field for prom/loki/influx
* Removed connection test case, fixed disabled state
* PanelQueryRunner: Need to cache preProcessPanelData function between runs so last result can be remembered
* Better fix for remembering lastResult
* Code simplification
* Simplify code a bit
* I needed to learn some rxjs and understand this more, so just playing around
* Updated
* Removed all the complete calls
* Refactoring
* StreamHandler -> observable start
* progress
* simple singal works
* Handle update time range
* added error handling
* wrap old function
* minor changes
* handle data format in the subscribe function
* Use replay subject to return last value to subscribers
* Set loading state after no response in 50ms
* added missing file
* updated comment
* Added cancelation of network requests
* runRequest: Added unit test scenario framework
* Progress on tests
* minor refactor of unit tests
* updated test
* removed some old code
* Shared queries work again, and also became so much simplier
* unified query and observe methods
* implict any fix
* Fixed closed subject issue
* removed comment
* Use last returned data for loading state
* WIP: Explore to runRequest makover step1
* Minor progress
* Minor progress on explore and runRequest
* minor progress
* Things are starting to work in explore
* Updated prometheus to use new observable query response, greatly simplified code
* Revert refId change
* Found better solution for key/refId/requestId problem
* use observable with loki
* tests compile
* fix loki query prep
* Explore: correct first response handling
* Refactorings
* Refactoring
* Explore: Fixes LoadingState and GraphResults between runs (#18986)
* Refactor: Adds state to DataQueryResponse
* Fix: Fixes so we do not empty results before new data arrives
Fixes: #17409
* Transformations work
* observable test data
* remove single() from loki promise
* Fixed comment
* Explore: Fixes failing Loki and Prometheus unit tests (#18995)
* Tests: Makes datasource tests work again
* Fix: Fixes loki datasource so highligthing works
* Chore: Runs Prettier
* Fixed query runner tests
* Delay loading state indication to 200ms
* Fixed test
* fixed unit tests
* Clear cached calcs
* Fixed bug getProcesedDataFrames
* Fix the correct test is a better idea
* Fix: Fixes so queries in Explore are only run if Graph/Table is shown (#19000)
* Fix: Fixes so queries in Explore are only run if Graph/Table is shown
Fixes: #18618
* Refactor: Removes unnecessary condition
* PanelData: provide legacy data only when needed (#19018)
* no legacy
* invert logic... now compiles
* merge getQueryResponseData and getDataRaw
* update comment about query editor
* use single getData() function
* only send legacy when it is used in explore
* pre process rather than post process
* pre process rather than post process
* Minor refactoring
* Add missing tags to test datasource response
* MixedDatasource: Adds query observable pattern to MixedDatasource (#19037)
* start mixed datasource
* Refactor: Refactors into observable parttern
* Tests: Fixes tests
* Tests: Removes console.log
* Refactor: Adds unique requestId
* WIP: inital POC
* Wip: Moving forward
* Wip
* Refactor: Makes loading indicator work for Prometheus
* Refactor: Reverts prom observable queries because they did not work for multiple targets
* Refactor: Transforms all epics into thunks
* Fix: Fixes scanning
* Fix: Fixes so that Instant and TimeSeries Prom query loads in parallel
* Fix: Fixes negation logic error
* Wip: Introduces PanelData as a carries for query responses
* Refactor: Makes errors work again
* Refactor: Simplifies code somewhat and removes comments
* Tests: Fixes broken tests
* Fix query latency
* Remove unused code
* WIP: inital POC
* Wip: Moving forward
* Wip
* Refactor: Makes loading indicator work for Prometheus
* Refactor: Reverts prom observable queries because they did not work for multiple targets
* Refactor: Transforms all epics into thunks
* Fix: Fixes scanning
* Fix: Fixes so that Instant and TimeSeries Prom query loads in parallel
* Fix: Fixes negation logic error
* Propagate errors in stream events, and close streams
* Explore: Adds support for new loki 'start' and 'end' params for labels endpoint
Also initializes absoluteRange when explore is initialized
Closes#16788
* Explore: Dispatches updateTimeRangeAction instead of passing absoluteRange when initializing
Also removes dependency on sinon from loki language provider test
* Loki: Refactors transformation of absolute time range to URL params into small utility function
* Makes use of rangeToParams() util function in loki language provider test
Also updates LanguageProvider.request() interface so that url should be type string, and adds optional params argument
Adds URL support for mode state (Metrics/Logs). It's important
to be able to share a link to logs when a data source supports
both metrics and logs.
Closes#17101
* Refactor: Removes replaceUrl from actions
* Refactor: Moves saveState thunk to epic
* Refactor: Moves thunks to epics
* Wip: removes resulttype and queries once
* Refactor: LiveTailing uses observer in query
* Refactor: Creates epics folder for epics and move back actioncreators
* Tests: Adds tests for epics and reducer
* Fix: Checks for undefined as well
* Refactor: Cleans up previous live tailing implementation
* Chore: merge with master
* Fix: Fixes url issuses and prom graph in Panels
* Refactor: Removes supportsStreaming and adds sockets to DataSourcePluginMeta instead
* Refactor: Changes the way we create TimeSeries
* Refactor: Renames sockets to streaming
* Refactor: Changes the way Explore does incremental updates
* Refactor: Removes unused method
* Refactor: Adds back Loading indication
* Move log's typings into grafana/ui
* Update the way context is retrieved for Loki
Major changes:
1. getLogRowContext expects row to be of LogRowModel type
2. getLogRowContext accepts generic options object, specific to a datasource of interest. limit option has been removed, and now it's a part of Loki's context query options (see below)
3. LogRowContextProvider performs two queries now. Before, it was Loki ds that performed queries in both directions when getLogRowContext.
4. Loki's getLogRowContext accepts options object of a type:
interface LokiContextQueryOptions {
direction?: 'BACKWARD' | 'FORWARD';
limit?: number;
}
This will enable querying in either direction independently and also slightly simplifies the way query errors are handled.
LogRowContextProvider maps the results to a Loki specific context types, basically string[][], as raw log lines are displayed in first version.
* Wip: Initial commit
* Refactor: Adds support in Loki datasource for streaming
* Refactor: Adds Live option to RefreshInterval
* Refactor: Adds styles to logrows
* Style: Reverses the order of Explore layout on Live
* Refactor: Adds LiveLogs component
* Tests: Adds tests for epics
* Style: Adds animation to Live in RefreshPicker
* Refactor: Adds ElapsedTime and progress line to LiveLogs
* Style: Adds specific colors to each theme
* Refactor: Adds support for Lokis new API
* Fix: Adds null to resulting empty array
* Refactor: Limits the rate of incoming messages from websockets
* Refactor: Throttles messages instead for simplicity
* Refactor: Optimizes row processing performance
* Refactor: Adds stop live button
* Fix: Fixes so that RefreshPicker shows the correct value when called programmatically
* Refactor: Merges with master and removes a console.log
* Refactor: Sorts rows in correct order and fixes minor UI issues
* Refactor: Adds minor improvments to sorting and container size
Removes the functionality of being able to collapse/expand the logs
container.
When both graph and table are collapsed and you reload the page
then the start page should not be displayed.
When both graph and table are collapsed and you reload the page
then the graph and table panels should be displayed.
Fix so that reducer tests are run. On of the test used fit() instead of
it() which had the consequence of only 1 reducer test was executed
and the rest skipped. There was some failing tests that now is
updated and now passes.
Fixes#17098
Adds basic support for switching between Metrics and Logs in Explore.
Currently only test datasource that supports both Metrics and Logs.
Summary of changes:
* Moves mode (Metric, Logs) selection to the left of datasource
picker and add some quick styling.
* Only trigger change in ToggleButton if not selected
* Set correct mode if datasource only supports logs
Closes#16808
* Wip: Removes queryTransactions from state
* Refactor: Adds back query failures
* Refactor: Moves error parsing to datasources
* Refactor: Adds back hinting for Prometheus
* Refactor: removed commented out code
* Refactor: Adds back QueryStatus
* Refactor: Adds scanning back to Explore
* Fix: Fixes prettier error
* Fix: Makes sure there is an error
* Merge: Merges with master
* Fix: Adds safeStringifyValue to error parsing
* Fix: Fixes table result calculations
* Refactor: Adds ErrorContainer and generic error handling in Explore
* Fix: Fixes so refIds remain consistent
* Refactor: Makes it possible to return result even when there are errors
* Fix: Fixes digest issue with Angular editors
* Refactor: Adds tests for explore utils
* Refactor: Breakes current behaviour of always returning a result even if Query fails
* Fix: Fixes Prettier error
* Fix: Adds back console.log for erroneous querys
* Refactor: Changes console.log to console.error
Explore now uses the timezone of the user to decide if local browser
time or UTC should be used.
- Now uses TimeRange instead of RawTimeRange in explore item
state tree and only parsing actual time in a few action
handlers.
- Time picker should now properly handle moving back/forward and
apply time range when both utc and non utc time zone.
- URL range representation is changed from YYYY-MM-DD HH:mm:ss
to epoch ms.
- Now uses AbsoluteTimeRange in graph component instead of moment.
- Makes a copy of the time range passed to timeSrv to make sure immutability
of explore time range when for example elasticsearch test datasources uses
timeSrv and sets a time range of last 1 min.
- Various refactorings and cleanup.
Closes#12812
* Added RefreshButton
* Added RefreshSelect
* Added RefreshSelectButton
* Added RefreshPicker
* Removed the magic string Paused
* Minor style changes and using Off instead of Pause
* Added HeadlessSelect
* Added HeadlessSelect story
* Added SelectButton
* Removed RefreshSelectButton
* Added TimePicker and moved ClickOutsideWrapper to ui/components
* Added TimePickerPopOver
* Added react-calendar
* Missed yarn lock file
* Added inputs to popover
* Added TimePicker and RefreshPicker to DashNav
* Moved TimePicker and RefreshPicker to app/core
* Added react-calendar to app and removed from ui/components
* Fixed PopOver onClick
* Moved everything back to ui components because of typings problems
* Exporing RefreshPicker and TimePicker
* Added Apply and inputs
* Added typings
* Added TimePickerInput and logic
* Fixed parsing of string to Moments
* Fixed range string
* Styling and connecting the calendars and inputs
* Changed Calendar styling
* Added backward forward and zoom
* Fixed responsive styles
* Moved TimePicker and RefreshPicker into app core
* Renamed menuIsOpen to isOpen
* Changed from className={} to className=""
* Moved Popover to TimePickerOptionGroup
* Renamed all PopOver to Popover
* Renamed popOver to popover and some minor refactorings
* Renamed files with git mv
* Added ButtonSelect and refactored RefreshPicker
* Refactored TimePicker to use new ButtonSelect
* Removed HeadlessSelect as suggested
* fix: Fix typings and misc errors after rebase
* wip: Enable time picker on dashboard and add tooltip
* Merge branch 'master' into hugoh/new-timepicker-and-unified-component
# Conflicts:
# packages/grafana-ui/package.json
# packages/grafana-ui/src/components/Input/Input.test.tsx
# packages/grafana-ui/src/components/Input/Input.tsx
# packages/grafana-ui/src/utils/validate.ts
# public/app/features/dashboard/panel_editor/QueryOptions.tsx
# yarn.lock
* fix: Snapshot update
* Move TimePicker default options into the TimePicker as statics, pass the tooltipContent down the line when wanted and wrap the button in a tooltip element
* fix: Override internal state prop if we provide one in a prop
* Updated snapshots
* Let dashnav control refreshPicker state
* feat: Add a stringToMs function
* wip: RefreshPicker
* wip: Move RefreshPicker to @grafana/ui
* wip: Move TimePicker to @grafana/ui
* wip: Remove comments
* wip: Add refreshPicker to explore
* wip: Use default intervals if the prop is missing
* wip: Nicer way of setting defaults
* fix: Control the select component
* wip: Add onMoveForward/onMoveBack
* Remove code related to the new time picker and refresh picker from dashnav
* Fix: Typings after merge
* chore: Minor fix after merge
* chore: Remove _.map usage
* chore: Moved refresh-picker logic out of the refresh picker since it will work a little differently in explore and dashboards until we have replaced the TimeSrv
* feat: Add an Interval component to @grafana/ui
* chore: Remove intervalId from redux state and move setInterval logic from ExploreToolbar to its own Interval component
* feat: Add refreshInterval to Explore's URL state
* feat: Pick up refreshInterval from url on page load
* fix: Set default refreshInterval when no value can be retained from URL
* fix: Update test initial state with refreshInterval
* fix: Handle URLs before RefreshPicker
* fix: Move RefreshInterval to url position 3 since the segments can take multiple positions
* fix: A better way of detecting urls without RefreshInterval in Explore
* chore: Some Explore typings
* fix: Attach refresh picker to interval picker
* chore: Sass fix for refresh button border radius
* fix: Remove refreshInterval from URL
* fix: Intervals now start when previous interval is finished
* fix: Use clearTimeout instead of clearInterval
* fix: Make sure there's a delay set before adding a timeout when we have slow explore queries
* wip: Add refresh picker to dashboard
* feat: Add util for removing keys with empty values
* feat: RefreshPicker in dashboards and tmp rem out old RefreshPicker
* fix: Remove the jumpy:ness in the refreshpicker
* Changed placement and made it hide when your in dashboard settings
* chore: Move logic related to refresh picker out of DashNav to its own component
* feat: Add tooltip to refreshpicker
* fix: Fix bug with refreshpicker not updating when setting to 'off'
* fix: Make it possible to override refresh intervals using the dashboard intervals
* chore: Change name of Interval to SetInterval to align with ecmascripts naming since its basically the same but declarative and async
* fix: Use default intervals when auto refresh is empty in dashboard settings
* fix: Hide time/interval picker when hidden is true on the model, such as on the home dashboard
* fix: Interval picker will have to handle location changes since timeSrv wont
* RefreshPicker: Refactoring refresh picker
* RefreshPicker: minor refactoring
* Style: made outlined buttons and used it in Alert component
* Refactor: clean up state on load data source failure
* Refactor: test data source thunk created
* Refactor: move logic to changeDatasource and call that from intialize
* Refactor: move load explore datasources to own thunk
* Refactor: move logic to updateDatasourceInstanceAction
* Tests: reducer tests
* Test(Explore): Added tests and made thunkTester async
* Fix(Explore): Fixed so that we do not render StartPage if there is no StartPage
* Fix(Explore): Missed type in merge
* Refactor: Thunktester did not fail tests on async failures and prevented queires from running on datasource failures
* Feat: Fadein error alert to prevent flickering
* Feat: Refresh labels after reconnect
* Refactor: Move useLokiForceLabels into useLokiLabels from PR comments
* Feat: adds refresh metrics to Prometheus languageprovider
* Style: removes padding for connected datasources
* Chore: remove implicit anys
- lines for graphs from different query rows end up in different
transactions
- within each transaction the color distribution resets leading to color
overlap
- this change takes existing transaction colors into account
