* ValidateInterval doesn't need the entire config
* Validation no longer depends on entire folder now that we've dropped foldertitle from api
* Don't depend on entire config struct
* Export validate group
* Alerting: feat: support deleting rule groups in the provisioning API
Adds support for DELETE to the provisioning API's alert rule groups route, which allows deleting the rule group with a
single API call. Previously, groups were deleted by deleting rules one-by-one.
Fixes#81860
This change doesn't add any new paths to the API, only new methods.
---------
Co-authored-by: Yuri Tseretyan <yuriy.tseretyan@grafana.com>
* Chore: Replace response status with const var
* Apply suggestions from code review
Co-authored-by: Sofia Papagiannaki <1632407+papagian@users.noreply.github.com>
* Add net/http import
---------
Co-authored-by: Sofia Papagiannaki <1632407+papagian@users.noreply.github.com>
This commit adds basic support for time_intervals, as mute_time_intervals
is deprecated in Alertmanager and scheduled to be removed before 1.0.
It does not add support for time_intervals in API or file provisioning,
nor does it support exporting time intervals. This will be added in
later commits to keep the changes as simple as possible.
Previously receivers were only validated before saving the alertmanager
configuration. This is a suboptimal experience for those upgrading with preview
as the failed channel upgrade will return an API error instead of being
summarized in the table.
Adds a feature flag (alertingUpgradeDryrunOnStart) that will dry-run the legacy
alert upgrade on startup. It is enabled by default.
When on legacy alerting, this feature flag will log the results of the legacy
alerting upgrade on startup and draw attention to anything in the current legacy
alerting configuration that will cause issues when the upgrade is eventually
performed. It acts as a log warning for those where action is required before
upgrading to Grafana v11 where legacy alerting will be removed.
If the db already has an entry in the kvstore for the silences of an
alertmanager before the migration has taken place, then it's possible that the
active alertmanager will overwrite the silence file created by the migration
before it has a chance to load it into memory.
This should not happen normally but is possible in edge-cases.
This change opts to bypass the unnecessary step of writing the silences to disk
during the migration and instead write them directly to the kvstore. This avoids
the race condition entirely and is more correct as we treat the database as the
source of truth for AM state.
Alerting: Remove start page of upgrade preview
Alerting upgrade page will now always show the summary table even before
upgrading any alerts or notification channels. There a few reasons for this:
- The information on the start page is redundant as it's now contained in the
documentation.
- Previously, if some unexpected issue prevented performing a full upgrade, a
user would have limited to no means to using the preview tool to help fix the
problem. This is because you could not see the summary table until the full
upgrade was performed at least once. Now, you can upgrade individual alerts and
notification channels from the beginning.
* Add notification settings to storage\domain and API models. Settings are a slice to workaround XORM mapping
* Support validation of notification settings when rules are updated
* Implement route generator for Alertmanager configuration. That fetches all notification settings.
* Update multi-tenant Alertmanager to run the generator before applying the configuration.
* Add notification settings labels to state calculation
* update the Multi-tenant Alertmanager to provide validation for notification settings
* update GET API so only admins can see auto-gen
* Alerting: fix race condition in (*ngalert/sender.ExternalAlertmanager).Run
* Chore: Fix data races when accessing members of *ngalert/state.FakeInstanceStore
* Chore: Fix data races in tests in ngalert/schedule and enable some parallel tests
* Chore: fix linters
* Chore: add TODO comment to remove loopvar once we move to Go 1.22
* Add config for limit of rules per rule group
* Warn when editing big groups through normal API
* Warn on prov api writes for groups
* Wire up comp root, tests
* Also add warning to state manager warm
* Drop unnecessary conversion
* Add user uid migration to run on every startup to protect against empty values in a upgrade downgrade scenario
* Add team uid migration to run on every startup to protect against empty values in a upgrade downgrade scenario
* Run team uid migration
* streamline initialization of test databases, support on-disk sqlite test db
* clean up test databases
* introduce testsuite helper
* use testsuite everywhere we use a test db
* update documentation
* improve error handling
* disable entity integration test until we can figure out locking error
* update GetUserVisibleNamespaces to use FolderSeriver
* update GetNamespaceByUID to use FolderService.GetFolders
* update GetAlertRulesForScheduling to use FolderService.GetFolders
* Update API and GetAlertRulesForScheduling to use the folder's full path
* get full path of folder in RouteTestGrafanaRuleConfig
* fix escaping of titles for MySQL
This pull request updates our fork of Alertmanager to commit 65bdab0, which is based on commit 5658f8c in Prometheus Alertmanager.
It applies the changes from grafana/alerting#155 which removes the overrides for validation of alerts, labels and silences that we had put in place to allow alerts and silences to work for non-Prometheus datasources. However, as this is now supported in Alertmanager with the UTF-8 work, we can use the new upstream functions and remove these overrides.
The compat package is a package in Alertmanager that takes care of backwards compatibility when parsing matchers, validating alerts, labels and silences. It has three modes: classic mode, UTF-8 strict mode, fallback mode. These modes are controlled via compat.InitFromFlags. Grafana initializes the compat package without any feature flags, which is the equivalent of fallback mode. Classic and UTF-8 strict mode are used in Mimir.
While Grafana Managed Alerts have no need for fallback mode, Grafana can still be used as an interface to manage the configurations of Mimir Alertmanagers and view configurations of Prometheus Alertmanager, and those installations might not have migrated or being running on older versions. Such installations behave as if in classic mode, and Grafana must be able to parse their configurations to interact with them for some period of time. As such, Grafana uses fallback mode until we are ready to drop support for outdated installations of Mimir and the Prometheus Alertmanager.
* Add single receiver method
* Add receiver permissions
* Add single/multi GET endpoints for receivers
* Remove stable tag from time intervals
See end of PR description here: https://github.com/grafana/grafana/pull/81672
* declare new API and models GettableTimeIntervals, PostableTimeIntervals
* add new actions alert.notifications.time-intervals:read and alert.notifications.time-intervals:write.
* update existing alerting roles with the read action. Add to all alerting roles.
* add integration tests
* Create locking config store that mimics existing provisioning store
* Rename existing receivers(_test).go
* Introduce shared receiver group service
* Fix test
* Move query model to models package
* ReceiverGroup -> Receiver
* Remove locking config store
* Move convert methods to compat.go
* Cleanup
This commit prevents saving configurations containing inhibition
rules in Grafana Alertmanager. It does not reject inhibition
rules when using external Alertmanagers, such as Mimir. This meant
the validation had to be put in the MultiOrgAlertmanager instead of
in the validation of PostableUserConfig. We can remove this when
inhibition rules are supported in Grafana Managed Alerts.
AM config applied via API would use the PostableUserConfig as the AM raw
config and also the hash used to decide when the AM config has changed.
However, when applied via the periodic sync the PostableApiAlertingConfig would
be used instead.
This leads to two issues:
- Inconsistent hash comparisons when modifying the AM causing redundant applies.
- GetStatus assumed the raw config was PostableUserConfig causing the endpoint
to return correctly after a new config is applied via API and then nothing once
the periodic sync runs.
Note: Technically, the upstream GrafanaAlertamanger GetStatus shouldn't be
returning PostableUserConfig or PostableApiAlertingConfig, but instead
GettableStatus. However, this issue required changes elsewhere and is out of
scope.
* Add folder store method for fetching all folder descendants
* Modify GetDescendantCounts() to fetch folder descendants at once
* Reduce DB calls when counting library panels under dashboard
* Reduce DB calls when counting dashboards under folder
* Reduce DB calls during folder delete
* Modify folder registry to count/delete entities under multiple folders
* Reduce DB calls when counting
* Reduce DB calls when deleting
* Remove folderID from service tests
* Remove folderID from ngalert migration tests
* Remove tests related to folderIDs
* Roll back change
Before removing FolderID from this test, we need to adjust the code
* Remove FolderID from publicdashboard pkg
* Add back annotations test
* RBAC: Search add user login filter
* Switch to a userService resolving instead
* Remove unused error
* Fallback to use the cache
* account for userID filter
* Account for the error
* snake case
* Add test cases
* Add api tests
* Fix return on error
* Re-order imports
* Add API test
* Add move tests
* Fix create folder
* Fix move
* Fix test
* Drop and re-create index so that allows a folder to contain a dashboard and a subfolder with same name
* Get folder by title defaults to root folder and optionally fetches folder by provided parent folder
* Apply suggestions from code review
* Alerting: During legacy migration reduce the number of created silences
During legacy migration every migrated rule was given a label rule_uid=<uid>.
This was used to silence DatasourceError/DatasourceNoData alerts for
migrated rules that had either ExecutionErrorState/NoDataState set to
keep_state, respectively.
This could potentially create a large amount of silences and a high cardinality
label. Both of these scenarios have poor outcomes for CPU load and latency in
unified alerting.
Instead, this change creates one label per ExecutionErrorState/NoDataState when
they are set to keep_state as well as two silence rules, if rules with said
labels were created during migration. These silence rules are:
- __legacy_silence_error_keep_state__ = true
- __legacy_silence_nodata_keep_state__ = true
This will drastically reduce the number of created silence rules in most cases
as well as not create the potentially high cardinality label `rule_uid`.
These don't get marshalled and unmarshalled in the same way as they are represented in Go
This PR changes the OpenAPI spec to reflect what the API accepts and sends back
* Simple, per-base-interval jitter
* Add log just for test purposes
* Add strategy approach, allow choosing between group or rule
* Add flag to jitter rules
* Add second toggle for jittering within a group
* Wire up toggles to strategy
* Slightly improve comment ordering
* Add tests for offset generation
* Rename JitterStrategyFrom
* Improve debug log message
* Use grafana SDK labels rather than prometheus labels
* ngalert openapi: Use same `basePath` as rest of Grafana
Currently, there are two issues that prevent easily merging `ngalert` and grafana openapi specs:
- The basePath is different. `grafana` has `/api` and `ngalert` has `/api/v1`. I changed `ngalert` to use `/api`
- The `ngalert` endpoints have their basePath in the each operation path. The basePath should actually be omitted
---------
Co-authored-by: Yuriy Tseretyan <yuriy.tseretyan@grafana.com>
* Change ruler API to expect the folder UID as namespace
* Update example requests
* Fix tests
* Update swagger
* Modify FIle field in /api/prometheus/grafana/api/v1/rules
* Fix ruler export
* Modify folder in responses to be formatted as <parent UID>/<title>
* Add alerting test with nested folders
* Apply suggestion from code review
* Alerting: use folder UID instead of title in rule API (#77166)
Co-authored-by: Sonia Aguilar <soniaaguilarpeiron@gmail.com>
* Drop a few more latent uses of namespace_id
* move getNamespaceKey to models package
* switch GetAlertRulesForScheduling to use folder table
* update GetAlertRulesForScheduling to return folder titles in format `parent_uid/title`.
* fi tests
* add tests for GetAlertRulesForScheduling when parent uid
* fix integration tests after merge
* fix test after merge
* change format of the namespace to JSON array
this is needed for forward compatibility, when we migrate to full paths
* update EF code to decode nested folder
---------
Co-authored-by: Yuri Tseretyan <yuriy.tseretyan@grafana.com>
Co-authored-by: Virginia Cepeda <virginia.cepeda@grafana.com>
Co-authored-by: Sonia Aguilar <soniaaguilarpeiron@gmail.com>
Co-authored-by: Alex Weaver <weaver.alex.d@gmail.com>
Co-authored-by: Gilles De Mey <gilles.de.mey@gmail.com>
* Alerting: Add metric to check for default AM configurations
* Use a gauge for the config hash
* don't go out of bounds when converting uint64 to float64
* expose metric for config hash
* update metrics after applying config
* add get mute timing by name to MuteTimingService
* update get mute timing request handler to use the service method
* replace validation, uniqueness and used errors with errutils
* update mute timing methods return errutil responses
* use the term "time interval" in errors bevause mute timings are deprecated in Alertmanager and will be replaced by time intervals in the future.
* update create and update methods to return struct instead of pointer
* Remove FolderID from service tests
* Add models
* Add folderID pack to publicdashboard tests
* Remove folderID from dashboard tests
* Remove folderID from folders
* Remove folderID from ngalert tests
* Remove nolint comment
* Add back some tests after rebase
* Move scope type vars to testutil package
* Expose parts of state historian for use in annotation backend
* Implement Loki ASH Annotation store
This store will only implement the `Get` method of a RepositoryImpl since alert state history
writes to Loki elsewhere.
* Use interface for Loki HTTP Client
* Add tests for Loki ASH Annotation store
* Add missing test
* Fix lint
* Organize tests
* Add filter tests
* Improve tests
* Move filter logic into outer function
* Fix lint
* Add comment
* Fix tests
* Fix lint
* Rename historian store + refactor
* Cleanup historian store
* Fix tests
* Minor cleanup
* Use new `ShouldRecordAnnotation` filter
* Fix logic and add tests for this check
* Fix typos, remove unused variables, `< 1` -> `== 0`
* More closely mimic RBAC filter from xorm to ensure correct logic
* Move off weaveworks client
* Address PR comments
* Alerting: Create feature flag for alert query optimization
Adds a feature flag alertingQueryOptimization for an already existing
functionality: alert query optimization. This feature flag will now be disabled
by default.
* Alerting: Add metrics to the remote Alertmanager struct
* rephrase http_requests_failed description
* make linter happy
* remove unnecessary metrics
* extract timed client to separate package
* use histogram collector from dskit
* remove weaveworks dependency
* capture metrics for all requests to the remote Alertmanager (both clients)
* use the timed client in the MimirAuthRoundTripper
* HTTPRequestsDuration -> HTTPRequestDuration, clean up mimir client factory function
* refactor
* less git diff
* gauge for last readiness check in seconds
* initialize LastReadinesCheck to 0, tweak metric names and descriptions
* add counters for sync attempts/errors
* last config sync and last state sync timestamps (gauges)
* change latency metric name
* metric for remote Alertmanager mode
* code review comments
* move label constants to metrics package
* Alerting: Fix NoData & Error alerts not resolving when rule is reset
On rule reset, when creating the PostableAlerts StateToPostableAlert did not
attach the correct NoData/Error alertname and rulename labels to expire/resolve
the active alerts when the previous cached state was NoData/Error.
This PR has two steps that together create a functional dry-run capability for the migration.
By enabling the feature flag alertingPreviewUpgrade when on legacy alerting it will:
a. Allow all Grafana Alerting background services except for the scheduler to start (multiorg alertmanager, state manager, routes, …).
b. Allow the UI to show Grafana Alerting pages alongside legacy ones (with appropriate in-app warnings that UA is not actually running).
c. Show a new “Alerting Upgrade” page and register associated /api/v1/upgrade endpoints that will allow the user to upgrade their organization live without restart and present a summary of the upgrade in a table.
* extract get and save operations to a alertmanagerConfigStore. this removes duplicated code in service (currently only mute timings) and improves testing
* replace generic errors with errutils one with better messages.
* update provisioning services to use new store
---------
Co-authored-by: Alexander Weaver <weaver.alex.d@gmail.com>
Some refactoring that will simplify next changes for dry-run PRs. This should be no-op as far as the created ngalert resources and database state, though it does change some logs.
The key change here is to modify migrateOrg to return pairs of legacy struct + ngalert struct instead of actually persisting the alerts and alertmanager config. This will allow us to capture error information during dry-run migration.
It also moves most persistence-related operations such as title deduplication and folder creation to the right before we persist. This will simplify eventual partial migrations (individual alerts, dashboards, channels, ...).
Additionally it changes channel code to deal with PostableGrafanaReceiver instead of PostableApiReceiver (integration instead of contact point).
Backend:
* Update the Grafana Alerting engine to provide feedback to HysteresisCommand. The feedback information is stored in state.Manager as a fingerprint of each state. The fingerprint is persisted to the database. Only fingerprints that belong to Pending and Alerting states are considered as "loaded" and provided back to the command.
- add ResultFingerprint to state.State. It's different from other fingerprints we store in the state because it is calculated from the result labels.
- add rule_fingerprint column to alert_instance
- update alerting evaluator to accept AlertingResultsReader via context, and update scheduler to provide it.
- add AlertingResultsFromRuleState that implements the new interface in eval package
- update getExprRequest to patch the hysteresis command.
* Only one "Recovery Threshold" query is allowed to be used in the alert rule and it must be the Condition.
Frontend:
* Add hysteresis option to Threshold in UI. It's called "Recovery Threshold"
* Add test for getUnloadEvaluatorTypeFromCondition
* Hide hysteresis in panel expressions
* Refactor isInvalid and add test for it
* Remove unnecesary React.memo
* Add tests for updateEvaluatorConditions
---------
Co-authored-by: Sonia Aguilar <soniaaguilarpeiron@gmail.com>
* (WIP) Alerting: Use the forked Alertmanager for remote secondary mode
* fall back to using internal AM in case of error
* remove TODOs, clean up .ini file, add orgId as part of remote AM config struct
* log warnings and errors, fall back to remoteSecondary, fall back to internal AM only
* extract logic to decide remote Alertmanager mode to a separate function, switch on mode
* tests
* make linter happy
* remove func to decide remote Alertmanager mode
* refactor factory function and options
* add default case to switch statement
* remove ineffectual assignment
* In migration, create one label per channel
This PR changes how routing is done by the legacy alerting migration.
Previously, we created a single label on each alert rule that contained an array of contact point names. Ex: __contact__="slack legacy testing","slack legacy testing2"
This label was then routed against a series of regex-matching policies with continue=true. Ex: __contacts__ =~ .*"slack legacy testing".*
In the case of many contact points, this array could quickly become difficult to manage and difficult to grok at-a-glance.
This PR replaces the single __contact__ label with multiple __legacy_c_{contactname}__ labels and simple equality-matching policies. These channel-specific policies are nested in a single route under the top-level route which matches against __legacy_use_channels__ = true for ease of organization.
This should improve the experience for users wanting to keep the default migrated routing strategy but who also want to modify which contact points an alert sends to.
* Exclude mapped nodata transitions when nodata mapped to OK
* Fix processEvalResults test
* Don't check NoDataState when filtering transition
* Add comment to explain purpose of separate function
---------
Co-authored-by: William Wernert <william.wernert@grafana.com>
* Drop from API response
* Drop from swagger docs
* Drop from integration tests
* regenerate public swagger docs
* Drop from frontend
* Drop asserts for namespaceID field
* Alerting: Send configuration and state to the remote Alertmanager on shutdown
* Alerting: Add a sync interval for ApplyConfig in remote secondary mode
* add routine to sync states and configs
* pass a cancellable context to syncRoutine(), remove tests for ApplyConfig, cache last config in memory
* extract logic to update config and state in the remote Alertmanager
* get latest config from the database
* avoid using separate goroutine for updating state and config
* clean up PR
* refactor, comments, tests
* update tests
* remove canceled context from calls to StopAndWait()
* create context with timeout and send config and state to remote Alertmanager
* update tests
* address code review comments
Swagger(ngalert): Add `X-Disable-Provenance` to missing operations
I added all functions that call the `determineProvenance` function
Schema changes are from:
`make` in `pkg/services/ngalert/api/tooling`
`make swagger-clean && make openapi3-gen` in root
* Alerting: Add a sync interval for ApplyConfig in remote secondary mode
* add routine to sync states and configs
* pass a cancellable context to syncRoutine(), remove tests for ApplyConfig, cache last config in memory
* extract logic to update config and state in the remote Alertmanager
* get latest config from the database
* avoid using separate goroutine for updating state and config
* clean up PR
* refactor, comments, tests
* update tests
* add config struct for remote secondary forked Alertmanager
* use errgroups for sync operations
* use waitgroup instead of errgroup
* remove helper method to sync AMs
* check for errors instead of bool syncErr
* Add Loki historian store stub
* Add composite store
* Use composite store if Loki historian enabled
* Split store interface into read/write
* Make composite + historian stores read only
* Use variadic constructor for composite
* Modify Loki store enable logic
* Use dskit.concurrency.ForEachJob for parallelism
* Alerting: Refactor readiness check
Moves the readiness check to the mimir client and removes the need to assert that we have senders - it already has a queue and can hold notifications until we're ready to send them.
---------
Signed-off-by: gotjosh <josue.abreu@gmail.com>
* Alerting: Attempt to retry retryable errors
Retrying has been broken for a good while now (at least since version 9.4) - this change attempts to re-introduce them in their simplest and safest form possible.
I first introduced #79095 to make sure we don't disrupt or put additional load on our customer's data sources with this change in a patch release. Paired with this change, retries can now work as expected.
There's two small differences between how retries work now and how they used to work in legacy alerting.
Retries only occur for valid alert definitions - if we suspect that that error comes from a malformed alert definition we skip retrying.
We have added a constant backoff of 1s in between retries.
---------
Signed-off-by: gotjosh <josue.abreu@gmail.com>
* Alerting: Attempt to retry retryable errors
Currently in a draft state, but this was the minimal diff I could put together to exemplify how could achieve this.
Signed-off-by: gotjosh <josue.abreu@gmail.com>
---------
Signed-off-by: gotjosh <josue.abreu@gmail.com>
* Folders: Show folders user has access to at the root level
* Refactor
* Refactor
* Hide parent folders user has no access to
* Skip expensive computation if possible
* Fix tests
* Fix potential nil access
* Fix duplicated folders
* Fix linter error
* Fix querying folders if no managed permissions set
* Update benchmark
* Add special shared with me folder and fetch available non-root folders on demand
* Fix parents query
* Improve db query for folders
* Reset benchmark changes
* Fix permissions for shared with me folder
* Simplify dedup
* Add option to include shared folder permission to user's permissions
* Fix nil UID
* Remove duplicated folders from shared list
* Folders: Fix fetching empty folder
* Nested folders: Show dashboards with directly assigned permissions
* Fix slow dashboards fetch
* Refactor
* Fix cycle dependencies
* Move shared folder to models
* Fix shared folder links
* Refactor
* Use feature flag for permissions
* Use feature flag
* Review comments
* Expose shared folder UID through frontend settings
* Add frontend type for sharedWithMeFolderUID option
* Refactor: apply review suggestions
* Fix parent uid for shared folder
* Fix listing shared dashboards for users with access to all folders
* Prevent creating folder with "shared" UID
* Add tests for shared folders
* Add test for shared dashboards
* Fix linter
* Add metrics for shared with me folder
* Add metrics for shared with me dashboards
* Fix tests
* Tests: add metrics as a dependency
* Fix access control metadata for shared with me folder
* Use constant for shared with me
* Optimize parent folders access check, fetch all folders in one query.
* Use labels for metrics
* Export Notification Policy correctly (#78020)
The JSON version of an exported Notification Policy now
inline correctly the policy in the same way the Yaml version
does.
Co-authored-by: Yuri Tseretyan <yuriy.tseretyan@grafana.com>
* ngalert `make`: Support GNU install on Darwin
Currently, the Makefile assumes that Darwin is using the Mac version of `sed`
I have the GNU version, so it failed. With this PR, it checks which version is installed
I also called `make` and there are some changes that came out of it
* swagger-gen
* Alerting: Only warm alert state cache if execute_alerts=true.
If the Grafana instance is not executing alerts, then Warm()-ing the state
manager is wasteful and could lead to misleading rule status queries, as the
status returned will be always based on the state loaded from the database at
startup, and not the most recent evaluation state.
* Move Warm() down to shared conditional.
* Alerting: Add clean_upgrade config and deprecate force_migration
Upgrading to UA and rolling back will no longer delete any data by default.
Instead, each set of tables will remain unchanged when switching between
legacy and UA. As such, the force_migration config has been deprecated
and no extra configuration is required to roll back to legacy anymore.
If clean_upgrade is set to true when upgrading from legacy alerting to Unified
Alerting, grafana will first delete all existing Unified Alerting resources,
thus re-upgrading all organizations from scratch. If false or unset,
organizations that have previously upgraded will not lose their existing Unified
Alerting data when switching between legacy and Unified Alerting.
Similar to force_migration, it should be kept false when not needed as it may
cause unintended data-loss if left enabled.
---------
Co-authored-by: Christopher Moyer <35463610+chri2547@users.noreply.github.com>
* Alerting: Keep track of individual org migration status
Save migration status per migrated org.
Change the meaning (and key/value) of the org_id=0 entry
to store the current (previous) config value used by alerting.
This is so we can know when to upgrade/downgrade by
comparing with the new config value in
UnifiedAlerting.IsEnabled.
* Alerting: Add a sync interval for ApplyConfig in remote secondary mode
* remove out of scope code
* remove parentheses after CleanUp for consistency in test comments
* Add comment to ApplyConfig
* Alerting: In migration improve deduplication of title and group
This change improves alert titles generated in the legacy migration
that occur when we need to deduplicate titles. Now when duplicate
titles are detected we will first attempt to append a sequential index,
falling back to a random uid if none are unique within 10 attempts.
This should cause shorter and more easily readable deduplicated
titles in most cases.
In addition, groups are no longer deduplicated. Instead we set them
to a combination of truncated dashboard name and humanized alert
frequency. This way, alerts from the same dashboard share a group
if they have the same evaluation interval. In the event that truncation
causes overlap, it won't be a big issue as all alerts will still be in a
group with the correct evaluation interval.
* Alerting: Introduce a Mimir client as part of the Remote Alertmanager
Mimir client that understands the new APIs developed for mimir. Very much a WIP still.
* more wip
* appease the linter
* more linting
* add more code
* get state from kvstore, encode, send
* send state to the remote Alertmanager, extract fullstate logic into its own function
* pass kvstore to remote.NewAlertmanager()
* refactor
* add fake kvstore to tests
* tests
* use FileStore to get state
* always log 'completed state upload'
* refactor compareRemoteConfig
* base64-encode the state in the file store
* export silences and nflog filenames, refactor
* log 'completed state/config upload...' regardless of outcome
* add values to the state store in tests
* address code review comments
* log error from filestore
---------
Co-authored-by: gotjosh <josue.abreu@gmail.com>
* Alerting: Apply query optimization to eval endpoints
Previously, query optimization was applied to alert queries when scheduled but
not when ran through `api/v1/eval` or `/api/v1/rule/test/grafana`. This could
lead to discrepancies between preview and scheduled alert results.
* Alerting: Add GetFullState method to FileStore
* make tests compile, create stateStore in NewAlertmanager
* return errors instead of logging, accept an arbitrary number of strings
* make NewAlertmanager() accept a stateStore
* Alerting: In migration, fallback to '1s' for malformed min interval
During legacy migration, when we encounter an alert datasource query
with a min interval (interval field in the query model) that is not
parseable, instead of failing the migration we fallback to a min interval
of 1s and continue.
The reason for this is a bug in legacy alerting (existing for a few major
versions) which allows arbitrary dashboard variables to be used as the
min interval, even though those variables do not work and will cause
the legacy alert to fail with `interval calculation failed: time: invalid
duration`.
* Remote Alertmanager(refactor): Only parse the URL once
Exactly what it says in the tin.
Signed-off-by: gotjosh <josue.abreu@gmail.com>
* use the existing tests
Signed-off-by: gotjosh <josue.abreu@gmail.com>
---------
Signed-off-by: gotjosh <josue.abreu@gmail.com>
* Alerting: Introduce a Mimir client as part of the Remote Alertmanager
This is our first attempt at making Grafana communicate use Mimir as a backend - it uses a new set of APIs that we've developed on the Mimir side to upload the grafana configuration and alertmanager state so that it can then be ported over.
Codewise, we've introduced a couple of things:
A client to isolate in its own package all the communication that happens with Mimir
A few changes to the remote/alertmanager to include uploading the configuration and state when it starts
A few refactors that align a bit better with the design approach that we're thinking
An integration tests again these newly developed APIs using a custom image
---------
Signed-off-by: gotjosh <josue.abreu@gmail.com>
Co-authored-by: Santiago <santiagohernandez.1997@gmail.com>
* remove use of SignedInUserCopies
* add extra safety to not cross assign permissions
unwind circular dependency
dashboardacl->dashboardaccess
fix missing import
* correctly set teams for permissions
* fix missing inits
* nit: check err
* exit early for api keys
* Alerting: Add an empty Forked Alertmanager
* Alerting: Add methods for silences to the forked Alertmanager
* check for errors in tests
* make linter happy
* Alerting: Add methods for alerts to the forked Alertmanager
* Alerting: Add methods for receivers to the forked Alertmanager
* Alerting: Add TestTemplate method to the forked Alertmanager
* make linter happy
* separate into both forked AMs
* fix tests
* Alerting: Add lifecycle methods to the forked Alertmanager
* Alerting: Add an empty Forked Alertmanager
* Alerting: Add methods for silences to the forked Alertmanager
* check for errors in tests
* make linter happy
* Alerting: Add methods for alerts to the forked Alertmanager
* Alerting: Add methods for receivers to the forked Alertmanager
* Alerting: Add TestTemplate method to the forked Alertmanager
* make linter happy
* separate into both forked AMs
* fix tests
* Alerting: Add an empty Forked Alertmanager
* Alerting: Add methods for silences to the forked Alertmanager
* check for errors in tests
* make linter happy
* Alerting: Add methods for alerts to the forked Alertmanager
* Alerting: Add methods for receivers to the forked Alertmanager
* make linter happy
* separate into both forked AMs
* fix tests
* rename testErr -> expErr
* Alerting: Add an empty Forked Alertmanager
* Alerting: Add methods for silences to the forked Alertmanager
* check for errors in tests
* make linter happy
* Alerting: Add methods for alerts to the forked Alertmanager
* make linter happy
* separate into both forked AMs
* rename testErr -> expErr
* Alerting: Add an empty Forked Alertmanager
* Alerting: Add methods for silences to the forked Alertmanager
* check for errors in tests
* make linter happy
* make linter happy
* Alerting: Add methods for silences to the forked Alertmanager
