Previously, an unavailable peer was considered recovered after a successful
proxy session to this peer. Until then, only a single client connection per
fail_timeout was allowed to be proxied to the peer.
Since stream sessions can be long, it may take indefinite time for a peer to
recover, limiting the ability of the peer to receive new connections.
Now, a peer is considered recovered after a successful TCP connection is
established to it. Balancers are notified of this event via the notify()
callback.
OpenSSL 1.1.0 now uses normal "nmake; nmake install" instead of using
custom "ms\do_ms.bat" script and "ms\nt.mak" makefile. And Configure
now requires --prefix to be absolute, and no longer derives --openssldir
from prefix (so it's specified explicitly). Generated libraries are now
called "libcrypto.lib" and "libssl.lib" instead of "libeay32.lib"
and "ssleay32.lib". Appropriate tests added to support both old and new
variants.
Additionally, openssl/lhash.h now triggers warning C4090 ('function' :
different 'const' qualifiers), so the warning was disabled.
There are lots of C4244 warnings (conversion from 'type1' to 'type2',
possible loss of data), so they were disabled.
The same applies to C4267 warnings (conversion from 'size_t' to 'type',
possible loss of data), most notably - conversion from ngx_str_t.len to
ngx_variable_value_t.len (which is unsigned:28). Additionally, there
is at least one case when it is not possible to fix the warning properly
without introducing win32-specific code: recv() on win32 uses "int len",
while POSIX defines "size_t len".
The ssize_t type now properly defined for 64-bit compilation with MSVC.
Caught by warning C4305 (truncation from '__int64' to 'ssize_t'), on
"cutoff = NGX_MAX_SIZE_T_VALUE / 10" in ngx_atosz()).
Several C4334 warnings (result of 32-bit shift implicitly converted to 64 bits)
were fixed by adding explicit conversions.
Several C4214 warnings (nonstandard extension used: bit field types other
than int) in ngx_http_script.h fixed by changing bit field types from
uintptr_t to unsigned.
Most notably, warning W8012 (comparing signed and unsigned values) reported
in multiple places where an unsigned value of small type (e.g., u_short) is
promoted to an int and compared to an unsigned value.
Warning W8072 (suspicious pointer arithmetic) disabled, it is reported
when we increment base pointer in ngx_shm_alloc().
These types are available with MSVC (at least since 2003, in stddef.h),
all variants of GCC (in stdint.h) and Watcom C. We need to define them
only for Borland C.
This allows to set a different one from command line when needed.
For example, to configure nginx with gcc as a compiler one could
use "make -f misc/GNUmakefile win32 CC=gcc".
This implies ticket key size of 80 bytes instead of previously used 48,
as both HMAC and AES keys are 32 bytes now. When an old 48-byte ticket key
is provided, we fall back to using backward-compatible AES128 encryption.
OpenSSL switched to using AES256 in 1.1.0, and we are providing equivalent
security. While here, order of HMAC and AES keys was reverted to make
the implementation compatible with keys used by OpenSSL with
SSL_CTX_set_tlsext_ticket_keys().
Prodded by Christian Klinger.
The current version of HTTP/1.1 standard allows relative references in
redirects (https://tools.ietf.org/html/rfc7231#section-7.1.2).
Allow this form for redirects generated by nginx by introducing the new
directive absolute_redirect.
SSL version 3.0 can be specified by the client at the record level for
compatibility reasons. Previously, ssl_preread module rejected such
connections, presuming they don't have SNI. Now SSL 3.0 is allowed at
the record level.
The resolver handles SRV requests in two stages. In the first
stage it gets all SRV RRs, and in the second stage it resolves
the names from SRV RRs into addresses.
Previously, if a response to an SRV request was cached, the
queries to resolve names were not limited by a timeout. If a
response to any of these queries was not received, the SRV
request could never complete.
If a response to an SRV request was not cached, and some of the
queries to resolve names timed out, NGX_RESOLVE_TIMEDOUT was
returned instead of successfully resolved addresses.
To fix both issues, resolving of names is now always limited by
a timeout.
Changeset e7cb5deb951d breaks build on CentOS 5 with "dereferencing
type-punned pointer will break strict-aliasing rules" warning. It is
backed out.
Instead, to keep builds with BoringSSL happy, type of the "value"
variable changed to "char *", and an explicit cast added before calling
ngx_parse_http_time().
A bug was introduced by 82efcedb310b that could lead to timing out of
responses or segmentation fault, when accept_mutex was enabled.
The output queue in HTTP/2 can contain frames from different streams.
When the queue is sent, all related write handlers need to be called.
In order to do so, the streams were added to the h2c->posted queue
after handling sent frames. Then this queue was processed in
ngx_http_v2_write_handler().
If accept_mutex is enabled, the event's "ready" flag is set but its
handler is not called immediately. Instead, the event is added to
the ngx_posted_events queue. At the same time in this queue can be
events from upstream connections. Such events can result in sending
output queue before ngx_http_v2_write_handler() is triggered. And
at the time ngx_http_v2_write_handler() is called, the output queue
can be already empty with some streams added to h2c->posted.
But after 82efcedb310b, these streams weren't processed if all frames
have already been sent and the output queue was empty. This might lead
to a situation when a number of streams were get stuck in h2c->posted
queue for a long time. Eventually these streams might get closed by
the send timeout.
In the worst case this might also lead to a segmentation fault, if
already freed stream was left in the h2c->posted queue. This could
happen if one of the streams was terminated but wasn't closed, due to
the HEADERS frame or a partially sent DATA frame left in the output
queue. If this happened the ngx_http_v2_filter_cleanup() handler
removed the stream from the h2c->waiting or h2c->posted queue on
termination stage, before the frame has been sent, and the stream
was again added to the h2c->posted queue after the frame was sent.
In order to fix all these problems and simplify the code, write
events of fake stream connections are now added to ngx_posted_events
instead of using a custom h2c->posted queue.
By default, "map" creates cacheable variables [1]. With this
parameter it creates a non-cacheable variable.
An original idea was to deduce the cacheability of the "map"
variable by checking the cacheability of variables specified
in source and resulting values, but it turned to be too hard.
For example, a cacheable variable can be overridden with the
"set" directive or with the SSI "set" command. Also, keeping
"map" variables cacheable by default is good for performance
reasons. This required adding a new parameter.
[1] Before db699978a33f (1.11.0), the cacheability of the
"map" variable could vary depending on the cacheability of
variables specified in resulting values (ticket #1090).
This is believed to be a bug rather than a feature.
Removed code that would cause an endless loop, and removed condition
check that is always false. The first page in the slot list is
guaranteed to satisfy an allocation.
On exit environment allocated from a pool is no longer available, leading
to a segmentation fault if, for example, a library tries to use it from
an atexit() handler.
Fix is to allocate environment via ngx_alloc() instead, and explicitly
free it using a pool cleanup handler if it's no longer used (e.g., on
configuration reload).
In Perl 5.8.6 the default was switched to use putenv() when used as
embedded library unless "PL_use_safe_putenv = 0" is explicitly used
in the code. Therefore, for modern versions of Perl it is no longer
necessary to restore previous environment when calling perl_destruct().
For Perl compiled with threads, without PERL_SET_INTERP() the PL_curinterp
remains set to the first interpreter created (that is, one created at
original start). As a result after a reload Perl thinks that operations
are done withing a thread, and, most notably, denies to change environment.
For example, the following code properly works on original start,
but fails after a reload:
perl 'sub {
my $r = shift;
$r->send_http_header("text/plain");
$ENV{TZ} = "UTC";
$r->print("tz: " . $ENV{TZ} . " (localtime " . (localtime()) . ")\n");
$ENV{TZ} = "Europe/Moscow";
$r->print("tz: " . $ENV{TZ} . " (localtime " . (localtime()) . ")\n");
return OK;
}';
To fix this, PERL_SET_INTERP() added anywhere where PERL_SET_CONTEXT()
was previously used.
Note that PERL_SET_INTERP() doesn't seem to be documented anywhere.
Yet it is used in some other software, and also seems to be the only
solution possible.
Atom size is the sum of atom header size and atom data size. The
specification says that the first 4 bytes are set to one when
the atom size is greater than the maximum unsigned 32-bit value.
Which means atom header size should be considered when the
comparison takes place between atom data size and 0xffffffff.
