This could happen when graceful shutdown configured by worker_shutdown_timeout
times out and is then followed by another timeout such as proxy_read_timeout.
In this case, the HEADERS frame is added to the output queue, but attempt to
send it fails (due to c->error forcibly set during graceful shutdown timeout).
This triggers request finalization which attempts to close the stream. But the
stream cannot be closed because there is a frame in the output queue, and the
connection cannot be finalized. This leaves the connection open without any
timer events leading to alert.
The fix is to post write event when sending output queue fails on c->error.
That will finalize the connection.
With this patch, all traffic over an HTTP/2 connection is counted in
the h2c->total_bytes field, and payload traffic is counted in
the h2c->payload_bytes field. As long as total traffic is many times
larger than payload traffic, we consider this to be a flood.
In 8df664ebe037, we've switched to maximizing stream window instead
of sending RST_STREAM. Since then handling of RST_STREAM with NO_ERROR
was fixed at least in Chrome, hence we switch back to using RST_STREAM.
This allows more effective rejecting of large bodies, and also minimizes
non-payload traffic to be accounted in the next patch.
Previously, if a response to the PTR request was cached, and ngx_resolver_dup()
failed to allocate memory for the resulting name, then the original node was
freed but left in expire_queue. A subsequent address resolving would end up
in a use-after-free memory access of the node either in ngx_resolver_expire()
or ngx_resolver_process_ptr(), when accessing it through expire_queue.
The fix is to leave the resolver node intact.
Don't waste server resources by sending RST_STREAM frames. Instead,
reject WINDOW_UPDATE frames with invalid zero increment by closing
connection with PROTOCOL_ERROR.
Don't waste server resources by sending RST_STREAM frames. Instead,
reject HEADERS and PRIORITY frames with self-dependency by closing
connection with PROTOCOL_ERROR.
When ngx_http_discard_request_body() call was added to ngx_http_send_response(),
there were no return codes other than NGX_OK and NGX_HTTP_INTERNAL_SERVER_ERROR.
Now it can also return NGX_HTTP_BAD_REQUEST, but ngx_http_send_response() still
incorrectly transforms it to NGX_HTTP_INTERNAL_SERVER_ERROR.
The fix is to propagate ngx_http_discard_request_body() errors.
As defined in HTTP/1.1, body chunks have the following ABNF:
chunk = chunk-size [ chunk-ext ] CRLF chunk-data CRLF
where chunk-data is a sequence of chunk-size octets.
With this change, chunk-data that doesn't end up with CRLF at chunk-size
offset will be treated as invalid, such as in the example provided below:
4
SEE-THIS-AND-
4
THAT
0
Previously, if unbuffered request body reading wasn't finished before
the request was redirected to a different location using error_page
or X-Accel-Redirect, and the request body is read again, this could
lead to disastrous effects, such as a duplicate post_handler call or
"http request count is zero" alert followed by a segmentation fault.
This happened in the following configuration (ticket #1819):
location / {
proxy_request_buffering off;
proxy_pass http://bad;
proxy_intercept_errors on;
error_page 502 = /error;
}
location /error {
proxy_pass http://backend;
}
Fixed excessive memory growth and CPU usage if stream windows are
manipulated in a way that results in generating many small DATA frames.
Fix is to limit the number of simultaneously allocated DATA frames.
Fixed uncontrolled memory growth if peer sends a stream of
headers with a 0-length header name and 0-length header value.
Fix is to reject headers with zero name length.
When using SMTP with SSL and resolver, read events might be enabled
during address resolving, leading to duplicate ngx_mail_ssl_handshake_handler()
calls if something arrives from the client, and duplicate session
initialization - including starting another resolving. This can lead
to a segmentation fault if the session is closed after first resolving
finished. Fix is to block read events while resolving.
Reported by Robert Norris,
http://mailman.nginx.org/pipermail/nginx/2019-July/058204.html.
After ac5a741d39cf it is now possible that after zstream.avail_out
reaches 0 and we allocate additional buffer, there will be no more data
to put into this buffer, triggering "zero size buf" alert. Fix is to
reset b->temporary flag in this case.
Additionally, an optimization added to avoid allocating additional buffer
in this case, by checking if last deflate() call returned Z_STREAM_END.
Note that checking for Z_STREAM_END by itself is not enough to fix alerts,
as deflate() can return Z_STREAM_END without producing any output if the
buffer is smaller than gzip trailer.
Reported by Witold Filipczyk,
http://mailman.nginx.org/pipermail/nginx-devel/2019-July/012469.html.
Due to shortcomings of the ccv->zero flag implementation in complex value
interface, length of the resulting string from ngx_http_complex_value()
might either not include terminating null character or include it,
so the only safe way to work with the result is to use it as a
null-terminated string.
Reported by Patrick Wollgast.
When "-" follows a parameter of maximum length, a single byte buffer
overflow happens, since the error branch does not check parameter length.
Fix is to avoid saving "-" to the parameter key, and instead use an error
message with "-" explicitly written. The message is mostly identical to
one used in similar cases in the preequal state.
Reported by Patrick Wollgast.
With level-triggered event methods it is important to specify
the NGX_CLOSE_EVENT flag to ngx_handle_read_event(), otherwise
the event won't be removed, resulting in CPU hog.
Reported by Patrick Wollgast.
To save memory hash code uses u_short to store resulting bucket sizes,
so maximum bucket size is limited to 65536 minus ngx_cacheline_size (larger
values will be aligned to 65536 which will overflow u_short). However,
there were no checks to enforce this, and using larger bucket sizes
resulted in overflows and segmentation faults.
Appropriate safety checks to enforce this added to ngx_hash_init().
When nginx is used with zlib patched with [1], which provides
integration with the future IBM Z hardware deflate acceleration, it ends
up computing CRC32 twice: one time in hardware, which always does this,
and one time in software by explicitly calling crc32().
crc32() calls were added in changesets 133:b27548f540ad ("nginx-0.0.1-
2003-09-24-23:51:12 import") and 134:d57c6835225c ("nginx-0.0.1-
2003-09-26-09:45:21 import") as part of gzip wrapping feature - back
then zlib did not support it.
However, since then gzip wrapping was implemented in zlib v1.2.0.4,
and it's already being used by nginx for log compression.
This patch replaces hand-written gzip wrapping with the one provided by
zlib. It simplifies the code, and makes it avoid computing CRC32 twice
when using hardware acceleration.
[1] https://github.com/madler/zlib/pull/410
Similarly to the change in 5491:74bfa803a5aa (1.5.9), we should accept
properly escaped URIs and unescape them as needed, else it is not possible
to handle URIs with question marks.
As we now have ctx->header_sent flag, it is further used to prevent
duplicate $r->send_http_header() calls, prevent output before sending
header, and $r->internal_redirect() after sending header.
Further, $r->send_http_header() protected from calls after
$r->internal_redirect().
Returning NGX_HTTP_INTERNAL_SERVER_ERROR if a perl code died after
sending header will lead to a "header already sent" alert. To avoid
it, we now check if header was already sent, and return NGX_ERROR
instead if it was.
Previously, redirects scheduled with $r->internal_redirect() were followed
even if the code then died. Now these are ignored and nginx will return
an error instead.
Variable handlers are not expected to send anything to the client, cannot
sleep or read body, and are not expected to modify the request. Added
appropriate protection to prevent accidental foot shooting.
Duplicate $r->sleep() and/or $r->has_request_body() calls result
in undefined behaviour (in practice, connection leaks were observed).
To prevent this, croak() added in appropriate places.
Previously, allocation errors in nginx.xs were more or less ignored,
potentially resulting in incorrect code execution in specific low-memory
conditions. This is changed to use ctx->error bit and croak(), similarly
to how output errors are now handled.
Note that this is mostly a cosmetic change, as Perl itself exits on memory
allocation errors, and hence nginx with Perl is hardly usable in low-memory
conditions.
When an error happens, the ctx->error bit is now set, and croak()
is called to terminate further processing. The ctx->error bit is
checked in ngx_http_perl_call_handler() to cancel further processing,
and is also checked in various output functions - to make sure these won't
be called if croak() was handled by an eval{} in perl code.
In particular, this ensures that output chain won't be called after
errors, as filters might not expect this to happen. This fixes some
segmentation faults under low memory conditions. Also this stops
request processing after filter finalization or request body reading
errors.
For cases where an HTTP error status can be additionally returned (for
example, 416 (Requested Range Not Satisfiable) from the range filter),
the ctx->status field is also added.
This ensures that correct ctx is always available, including after
filter finalization. In particular, this fixes a segmentation fault
with the following configuration:
location / {
image_filter test;
perl 'sub {
my $r = shift;
$r->send_http_header();
$r->print("foo\n");
$r->print("bar\n");
}';
}
This also seems to be the only way to correctly handle filter finalization
in various complex cases, for example, when embedded perl is used both
in the original handler and in an error page called after filter
finalization.
The NGX_DONE test in ngx_http_perl_handle_request() was introduced
in 1702:86bb52e28ce0, which also modified ngx_http_perl_call_handler()
to return NGX_DONE with c->destroyed. The latter part was then
removed in 3050:f54b02dbb12b, so NGX_DONE test is no longer needed.
Embedded perl does not set any request fields needed for conditional
requests processing. Further, filter finalization in the not_modified
filter can cause segmentation faults due to cleared ctx as in
ticket #1786.
Before 5fb1e57c758a (1.7.3) the not_modified filter was implicitly disabled
for perl responses, as r->headers_out.last_modified_time was -1. This
change restores this behaviour by using the explicit r->disable_not_modified
flag.
Note that this patch doesn't try to address perl module robustness against
filter finalization and other errors returned from filter chains. It should
be eventually reworked to handle errors instead of ignoring them.
A new directive limit_req_dry_run allows enabling the dry run mode. In this
mode requests are neither rejected nor delayed, but reject/delay status is
logged as usual.
In case of filter finalization, essential request fields like r->uri,
r->args etc could be changed, which affected the cache update subrequest.
Also, after filter finalization r->cache could be set to NULL, leading to
null pointer dereference in ngx_http_upstream_cache_background_update().
The fix is to create background cache update subrequest before sending the
cached response.
Since initial introduction in 1aeaae6e9446 (1.11.10) background cache update
subrequest was created after sending the cached response because otherwise it
blocked the parent request output. In 9552758a786e (1.13.1) background
subrequests were introduced to eliminate the delay before sending the final
part of the cached response. This also made it possible to create the
background cache update subrequest before sending the response.
Note that creating the subrequest earlier does not change the fact that in case
of filter finalization the background cache update subrequest will likely not
have enough time to successfully update the cache entry. Filter finalization
leads to the main request termination as soon the current iteration of request
processing is complete.
In ngx_http_range_singlepart_body() special buffers where passed
unmodified, including ones after the end of the range. As such,
if the last buffer of a response was sent separately as a special
buffer, two buffers with b->last_buf set were present in the response.
In particular, this might result in a duplicate final chunk when using
chunked transfer encoding (normally range filter and chunked transfer
encoding are not used together, but this may happen if there are trailers
in the response). This also likely to cause problems in HTTP/2.
Fix is to skip all special buffers after we've sent the last part of
the range requested. These special buffers are not meaningful anyway,
since we set b->last_buf in the buffer with the last part of the range,
and everything is expected to be flushed due to it.
Additionally, ngx_http_next_body_filter() is now called even
if no buffers are to be passed to it. This ensures that various
write events are properly propagated through the filter chain. In
particular, this fixes test failures observed with the above change
and aio enabled.
Filters are not allowed to change incoming chain links, and should allocate
their own links if any modifications are needed. Nevertheless
ngx_http_range_singlepart_body() modified incoming chain links in some
cases, notably at the end of the requested range.
No problems caused by this are currently known, mostly because of
limited number of possible modifications and the position of the range
body filter in the filter chain. Though this behaviour is clearly incorrect
and tests demonstrate that it can at least cause some proxy buffers being
lost when using proxy_force_ranges, leading to less effective handling
of responses.
Fix is to always allocate new chain links in ngx_http_range_singlepart_body().
Links are explicitly freed to ensure constant memory usage with long-lived
requests.
If a complex value is expected to be of type size_t, and the compiled
value is constant, the constant size_t value is remembered at compile
time.
The value is accessed through ngx_http_complex_value_size() which
either returns the remembered constant or evaluates the expression
and parses it as size_t.
Previously, ngx_utf8_decode() was called from ngx_utf8_length() with
incorrect length, potentially resulting in out-of-bounds read when
handling invalid UTF-8 strings.
In practice out-of-bounds reads are not possible though, as autoindex, the
only user of ngx_utf8_length(), provides null-terminated strings, and
ngx_utf8_decode() anyway returns an errors when it sees a null in the
middle of an UTF-8 sequence.
Reported by Yunbin Liu.
If OCSP stapling was enabled with dynamic certificate loading, with some
OpenSSL versions (1.0.2o and older, 1.1.0h and older; fixed in 1.0.2p,
1.1.0i, 1.1.1) a segmentation fault might happen.
The reason is that during an abbreviated handshake the certificate
callback is not called, but the certificate status callback was called
(https://github.com/openssl/openssl/issues/1662), leading to NULL being
returned from SSL_get_certificate().
Fix is to explicitly check SSL_get_certificate() result.
If X509_get_issuer_name() or X509_get_subject_name() returned NULL,
this could lead to a certificate reference leak. It cannot happen
in practice though, since each function returns an internal pointer
to a mandatory subfield of the certificate successfully decoded by
d2i_X509() during certificate message processing (closes#1751).
Previously the ngx_inet_resolve_host() function sorted addresses in a way that
IPv4 addresses came before IPv6 addresses. This was implemented in eaf95350d75c
(1.3.10) along with the introduction of getaddrinfo() which could resolve host
names to IPv6 addresses. Since the "listen" directive only used the first
address, sorting allowed to preserve "listen" compatibility with the previous
behavior and with the behavior of nginx built without IPv6 support. Now
"listen" uses all resolved addresses which makes sorting pointless.
Previously only one address was used by the listen directive handler even if
host name resolved to multiple addresses. Now a separate listening socket is
created for each address.
This makes it possible to provide certificates directly via variables
in ssl_certificate / ssl_certificate_key directives, without using
intermediate files.
It was accidentally introduced in 77436d9951a1 (1.15.9). In MSVC 2015
and more recent MSVC versions it triggers warning C4456 (declaration of
'pkey' hides previous local declaration). Previously, all such warnings
were resolved in 2a621245f4cf.
Reported by Steve Stevenson.
Server name callback is always called by OpenSSL, even
if server_name extension is not present in ClientHello. As such,
checking c->ssl->handshaked before the SSL_get_servername() result
should help to more effectively prevent renegotiation in
OpenSSL 1.1.0 - 1.1.0g, where neither SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS
nor SSL_OP_NO_RENEGOTIATION is available.
The SSL_OP_NO_CLIENT_RENEGOTIATION option was introduced in LibreSSL 2.5.1.
Unlike OpenSSL's SSL_OP_NO_RENEGOTIATION, it only disables client-initiated
renegotiation, and hence can be safely used on all SSL contexts.
If ngx_pool_cleanup_add() fails, we have to clean just created SSL context
manually, thus appropriate call added.
Additionally, ngx_pool_cleanup_add() moved closer to ngx_ssl_create() in
the ngx_http_ssl_module, to make sure there are no leaks due to intermediate
code.
Notably this affects various allocation errors, and should generally
improve things if an allocation error actually happens during a callback.
Depending on the OpenSSL version, returning an error can result in
either SSL_R_CALLBACK_FAILED or SSL_R_CLIENTHELLO_TLSEXT error from
SSL_do_handshake(), so both errors were switched to the "info" level.
OpenSSL 1.1.1 does not save server name to the session if server name
callback returns anything but SSL_TLSEXT_ERR_OK, thus breaking
the $ssl_server_name variable in resumed sessions.
Since $ssl_server_name can be used even if we've selected the default
server and there are no other servers, it looks like the only viable
solution is to always return SSL_TLSEXT_ERR_OK regardless of the actual
result.
To fix things in the stream module as well, added a dummy server name
callback which always returns SSL_TLSEXT_ERR_OK.
A virtual server may have no SSL context if it does not have certificates
defined, so we have to use config of the ngx_http_ssl_module from the
SSL context in the certificate callback. To do so, it is now passed as
the argument of the callback.
The stream module doesn't really need any changes, but was modified as
well to match http code.
Dynamic certificates re-introduce problem with incorrect session
reuse (AKA "virtual host confusion", CVE-2014-3616), since there are
no server certificates to generate session id context from.
To prevent this, session id context is now generated from ssl_certificate
directives as specified in the configuration. This approach prevents
incorrect session reuse in most cases, while still allowing sharing
sessions across multiple machines with ssl_session_ticket_key set as
long as configurations are identical.
Passwords have to be copied to the configuration pool to be used
at runtime. Also, to prevent blocking on stdin (with "daemon off;")
an empty password list is provided.
To make things simpler, password handling was modified to allow
an empty array (with 0 elements and elts set to NULL) as an equivalent
of an array with 1 empty password.
To evaluate variables, a request is created in the certificate callback,
and then freed. To do this without side effects on the stub_status
counters and connection state, an additional function was introduced,
ngx_http_alloc_request().
Only works with OpenSSL 1.0.2+, since there is no SSL_CTX_set_cert_cb()
in older versions.
This makes it possible to reuse certificate loading at runtime,
as introduced in the following patches.
Additionally, this improves error logging, so nginx will now log
human-friendly messages "cannot load certificate" instead of only
referring to sometimes cryptic names of OpenSSL functions.
The "(SSL:)" snippet currently appears in logs when nginx code uses
ngx_ssl_error() to log an error, but OpenSSL's error queue is empty.
This can happen either because the error wasn't in fact from OpenSSL,
or because OpenSSL did not indicate the error in the error queue
for some reason.
In particular, currently "(SSL:)" can be seen in errors at least in
the following cases:
- When SSL_write() fails due to a syscall error,
"[info] ... SSL_write() failed (SSL:) (32: Broken pipe)...".
- When loading a certificate with no data in it,
"[emerg] PEM_read_bio_X509_AUX(...) failed (SSL:)".
This can easily happen due to an additional empty line before
the end line, so all lines of the certificate are interpreted
as header lines.
- When trying to configure an unknown curve,
"[emerg] SSL_CTX_set1_curves_list("foo") failed (SSL:)".
Likely there are other cases as well.
With this change, "(SSL:...)" will be only added to the error message
if there is something in the error queue. This is expected to make
logs more readable in the above cases. Additionally, with this change
it is now possible to use ngx_ssl_error() to log errors when some
of the possible errors are not from OpenSSL and not expected to have
anything in the error queue.
Checking multiple errors at once is a bad practice, as in general
it is not guaranteed that an object can be used after the error.
In this particular case, checking errors after multiple allocations
can result in excessive errors being logged when there is no memory
available.
On Windows, connect() errors are only reported via exceptfds descriptor set
from select(). Previously exceptfds was set to NULL, and connect() errors
were not detected at all, so connects to closed ports were waiting till
a timeout occurred.
Since ongoing connect() means that there will be a write event active,
except descriptor set is copied from the write one. While it is possible
to construct except descriptor set as a concatenation of both read and write
descriptor sets, this looks unneeded.
With this change, connect() errors are properly detected now when using
select(). Note well that it is not possible to detect connect() errors with
WSAPoll() (see https://daniel.haxx.se/blog/2012/10/10/wsapoll-is-broken/).
WSAPoll() is only available with Windows Vista and newer (and only
available during compilation if _WIN32_WINNT >= 0x0600). To make
sure the code works with Windows XP, we do not redefine _WIN32_WINNT,
but instead load WSAPoll() dynamically if it is not available during
compilation.
Also, sockets are not guaranteed to be small integers on Windows.
So an index array is used instead of NGX_USE_FD_EVENT to map
events to connections.
Previously, the code incorrectly assumed "ngx_event_t *" elements
instead of "struct pollfd".
This is mostly cosmetic change, as this code is never called now.
Previously, when using proxy_upload_rate and proxy_download_rate, the buffer
size for reading from a socket could be reduced as a result of rate limiting.
For connection-oriented protocols this behavior is normal since unread data will
normally be read at the next iteration. But for datagram-oriented protocols
this is not the case, and unread part of the datagram is lost.
Now buffer size is not limited for datagrams. Rate limiting still works in this
case by delaying the next reading event.
A shared connection does not own its file descriptor, which means that
ngx_handle_read_event/ngx_handle_write_event calls should do nothing for it.
Currently the c->shared flag is checked in several places in the stream proxy
module prior to calling these functions. However it was not done everywhere.
Missing checks could lead to calling
ngx_handle_read_event/ngx_handle_write_event on shared connections.
The problem manifested itself when using proxy_upload_rate and resulted in
either duplicate file descriptor error (e.g. with epoll) or incorrect further
udp packet processing (e.g. with kqueue).
The fix is to set and reset the event active flag in a way that prevents
ngx_handle_read_event/ngx_handle_write_event from scheduling socket events.
Previous interface of ngx_open_dir() assumed that passed directory name
has a room for NGX_DIR_MASK at the end (NGX_DIR_MASK_LEN bytes). While all
direct users of ngx_dir_open() followed this interface, this also implied
similar requirements for indirect uses - in particular, via ngx_walk_tree().
Currently none of ngx_walk_tree() uses provides appropriate space, and
fixing this does not look like a right way to go. Instead, ngx_dir_open()
interface was changed to not require any additional space and use
appropriate allocations instead.
If SSL_write_early_data() returned SSL_ERROR_WANT_WRITE, stop further reading
using a newly introduced c->ssl->write_blocked flag, as otherwise this would
result in SSL error "ssl3_write_bytes:bad length". Eventually, normal reading
will be restored by read event posted from successful SSL_write_early_data().
While here, place "SSL_write_early_data: want write" debug on the path.
Previously, if an SRV record was successfully resolved, but all of its A
records failed to resolve, NXDOMAIN was returned to the caller, which is
considered a successful resolve rather than an error. This could result in
losing the result of a previous successful resolve by the caller.
Now NXDOMAIN is only returned if at least one A resolve completed with this
code. Otherwise the error state of the first A resolve is returned.
Previously, unnamed regex captures matched in the parent request, were not
available in a cloned subrequest. Now 3 fields related to unnamed captures
are copied to a cloned subrequest: r->ncaptures, r->captures and
r->captures_data. Since r->captures cannot be changed by either request after
creating a clone, a new flag r->realloc_captures is introduced to force
reallocation of r->captures.
The issue was reported as a proxy_cache_background_update misbehavior in
http://mailman.nginx.org/pipermail/nginx/2018-December/057251.html.
In the past, there were several security issues which resulted in
worker process memory disclosure due to buffers with negative size.
It looks reasonable to check for such buffers in various places,
much like we already check for zero size buffers.
While here, removed "#if 1 / #endif" around zero size buffer checks.
It looks highly unlikely that we'll disable these checks anytime soon.
On 32-bit platforms mp4->buffer_pos might overflow when a large
enough (close to 4 gigabytes) atom is being skipped, resulting in
incorrect memory addesses being read further in the code. In most
cases this results in harmless errors being logged, though may also
result in a segmentation fault if hitting unmapped pages.
To address this, ngx_mp4_atom_next() now only increments mp4->buffer_pos
up to mp4->buffer_end. This ensures that overflow cannot happen.
Variables now do not depend on presence of the HTTP status code in response.
If the corresponding event occurred, variables contain time between request
creation and the event, and "-" otherwise.
Previously, intermediate value of the $upstream_response_time variable held
unix timestamp.
The directive allows to drop binding between a client and existing UDP stream
session after receiving a specified number of packets. First packet from the
same client address and port will start a new session. Old session continues
to exist and will terminate at moment defined by configuration: either after
receiving the expected number of responses, or after timeout, as specified by
the "proxy_responses" and/or "proxy_timeout" directives.
By default, proxy_requests is zero (disabled).
An attack that continuously switches HTTP/2 connection between
idle and active states can result in excessive CPU usage.
This is because when a connection switches to the idle state,
all of its memory pool caches are freed.
This change limits the maximum allowed number of idle state
switches to 10 * http2_max_requests (i.e., 10000 by default).
This limits possible CPU usage in one connection, and also
imposes a limit on the maximum lifetime of a connection.
Initially reported by Gal Goldshtein from F5 Networks.
Fixed uncontrolled memory growth in case peer is flooding us with
some frames (e.g., SETTINGS and PING) and doesn't read data. Fix
is to limit the number of allocated control frames.
Previously there was no validation for the size of a 64-bit atom
in an mp4 file. This could lead to a CPU hog when the size is 0,
or various other problems due to integer underflow when calculating
atom data size, including segmentation fault or worker process
memory disclosure.
Size of a shared memory zones must be at least two pages - one page
for slab allocator internal data, and another page for actual allocations.
Using 8192 instead is wrong, as there are systems with page sizes other
than 4096.
Note well that two pages is usually too low as well. In particular, cache
is likely to use two allocations of different sizes for global structures,
and at least four pages will be needed to properly allocate cache nodes.
Except in a few very special cases, with keys zone of just two pages nginx
won't be able to start. Other uses of shared memory impose a limit
of 8 pages, which provides some room for global allocations. This patch
doesn't try to address this though.
Inspired by ticket #1665.
With maximum version explicitly set, TLSv1.3 will not be unexpectedly
enabled if nginx compiled with OpenSSL 1.1.0 (without TLSv1.3 support)
will be run with OpenSSL 1.1.1 (with TLSv1.3 support).
In e3ba4026c02d (1.15.4) nginx own renegotiation checks were disabled
if SSL_OP_NO_RENEGOTIATION is available. But since SSL_OP_NO_RENEGOTIATION
is only set on a connection, not in an SSL context, SSL_clear_option()
removed it as long as a matching virtual server was found. This resulted
in a segmentation fault similar to the one fixed in a6902a941279 (1.9.8),
affecting nginx built with OpenSSL 1.1.0h or higher.
To fix this, SSL_OP_NO_RENEGOTIATION is now explicitly set in
ngx_http_ssl_servername() after adjusting options. Additionally, instead
of c->ssl->renegotiation we now check c->ssl->handshaked, which seems
to be a more correct flag to test, and will prevent the segmentation fault
from happening even if SSL_OP_NO_RENEGOTIATION is not working.
The "no suitable signature algorithm" errors are reported by OpenSSL 1.1.1
when using TLSv1.3 if there are no shared signature algorithms. In
particular, this can happen if the client limits available signature
algorithms to something we don't have a certificate for, or to an empty
list. For example, the following command:
openssl s_client -connect 127.0.0.1:8443 -sigalgs rsa_pkcs1_sha1
will always result in the "no suitable signature algorithm" error
as the "rsa_pkcs1_sha1" algorithm refers solely to signatures which
appear in certificates and not defined for use in TLS 1.3 handshake
messages.
The SSL_R_NO_COMMON_SIGNATURE_ALGORITHMS error is what BoringSSL returns
in the same situation.
The "no suitable key share" errors are reported by OpenSSL 1.1.1 when
using TLSv1.3 if there are no shared groups (that is, elliptic curves).
In particular, it is easy enough to trigger by using only a single
curve in ssl_ecdh_curve:
ssl_ecdh_curve secp384r1;
and using a different curve in the client:
openssl s_client -connect 127.0.0.1:443 -curves prime256v1
On the client side it is seen as "sslv3 alert handshake failure",
"SSL alert number 40":
0:error:14094410:SSL routines:ssl3_read_bytes:sslv3 alert handshake failure:ssl/record/rec_layer_s3.c:1528:SSL alert number 40
It can be also triggered with default ssl_ecdh_curve by using a curve
which is not in the default list (X25519, prime256v1, X448, secp521r1,
secp384r1):
openssl s_client -connect 127.0.0.1:8443 -curves brainpoolP512r1
Given that many clients hardcode prime256v1, these errors might become
a common problem with TLSv1.3 if ssl_ecdh_curve is redefined. Previously
this resulted in not using ECDH with such clients, but with TLSv1.3 it
is no longer possible and will result in a handshake failure.
The SSL_R_NO_SHARED_GROUP error is what BoringSSL returns in the same
situation.
Seen at:
https://serverfault.com/questions/932102/nginx-ssl-handshake-error-no-suitable-key-share
Previously, configurations with typo, for example
fastcgi_cache_valid 200301 302 5m;
successfully pass configuration test. Adding check for status
codes > 599, and such configurations are now properly rejected.
The bgcolor attribute overrides compatibility settings in browsers
and leads to undesirable behavior when the default font color is set
to white in the browser, since font-color is not also overridden.
Following 7319:dcab86115261, as long as SSL_OP_NO_RENEGOTIATION is
defined, it is OpenSSL library responsibility to prevent renegotiation,
so the checks are meaningless.
Additionally, with TLSv1.3 OpenSSL tends to report SSL_CB_HANDSHAKE_START
at various unexpected moments - notably, on KeyUpdate messages and
when sending tickets. This change prevents unexpected connection
close on KeyUpdate messages and when finishing handshake with upcoming
early data changes.
Trying to look into r->err_status in the "return" directive
makes it behave differently than real errors generated in other
parts of the code, and is an endless source of various problems.
This behaviour was introduced in 726:7b71936d5299 (0.4.4) with
the comment "fix: "return" always overrode "error_page" response code".
It is not clear if there were any real cases this was expected to fix,
but there are several cases which are broken due to this change, some
previously fixed (4147:7f64de1cc2c0).
In ticket #1634, the problem is that when r->err_status is set to
a non-special status code, it is not possible to return a response
by simply returning r->err_status. If this is the case, the only
option is to return script's e->status instead. An example
configuration:
location / {
error_page 404 =200 /err502;
return 404;
}
location = /err502 {
return 502;
}
After the change, such a configuration will properly return
standard 502 error, much like it happens when a 502 error is
generated by proxy_pass.
This also fixes the following configuration to properly close
connection as clearly requested by "return 444":
location / {
error_page 404 /close;
return 404;
}
location = /close {
return 444;
}
Previously, this required "error_page 404 = /close;" to work
as intended.
Socket leak was observed in the following configuration:
error_page 400 = /close;
location = /close {
return 444;
}
The problem is that "return 444" triggers termination of the request,
and due to error_page termination thinks that it needs to use a posted
request to clear stack. But at the early request processing where 400
errors are generated there are no ngx_http_run_posted_requests() calls,
so the request is only terminated after an external event.
Variants of the problem include "error_page 497" instead (ticket #695)
and various other errors generated during early request processing
(405, 414, 421, 494, 495, 496, 501, 505).
The same problem can be also triggered with "return 499" and "return 408"
as both codes trigger ngx_http_terminate_request(), much like "return 444".
To fix this, the patch adds ngx_http_run_posted_requests() calls to
ngx_http_process_request_line() and ngx_http_process_request_headers()
functions, and to ngx_http_v2_run_request() and ngx_http_v2_push_stream()
functions in HTTP/2.
Since the ngx_http_process_request() function is now only called via
other functions which call ngx_http_run_posted_requests(), the call
there is no longer needed and was removed.
It is possible that after SSL_read() will return SSL_ERROR_WANT_WRITE,
further calls will return SSL_ERROR_WANT_READ without reading any
application data. We have to call ngx_handle_write_event() and
switch back to normal write handling much like we do if there are some
application data, or the write there will be reported again and again.
Similarly, we have to switch back to normal read handling if there
is saved read handler and SSL_write() returns SSL_ERROR_WANT_WRITE.
While SSL_read() most likely to return SSL_ERROR_WANT_WRITE (and SSL_write()
accordingly SSL_ERROR_WANT_READ) during an SSL renegotiation, it is
not necessary mean that a renegotiation was started. In particular,
it can never happen during a renegotiation or can happen multiple times
during a renegotiation.
Because of the above, misleading "peer started SSL renegotiation" info
messages were replaced with "SSL_read: want write" and "SSL_write: want read"
debug ones.
Additionally, "SSL write handler" and "SSL read handler" are now logged
by the SSL write and read handlers, to make it easier to understand that
temporary SSL handlers are called instead of normal handlers.
The "do { c->recv() } while (c->read->ready)" form used in the
ngx_http_lingering_close_handler() is not really correct, as for
example with SSL c->read->ready may be still set when returning NGX_AGAIN
due to SSL_ERROR_WANT_WRITE. Therefore the above might be an infinite loop.
This doesn't really matter in lingering close, as we shutdown write side
of the socket anyway and also disable renegotiation (and even without shutdown
and with renegotiation it requires using very large certificate chain and
tuning socket buffers to trigger SSL_ERROR_WANT_WRITE). But for the sake of
correctness added an NGX_AGAIN check.
If sending request body was not completed (u->request_body_sent is not set),
the upstream keepalive module won't save such a connection. However, it
is theoretically possible (though highly unlikely) that sending of some
control frames can be blocked after the request body was sent. The
ctx->output_blocked flag introduced to disable keepalive in such cases.
The code is now able to parse additional control frames after
the response is received, and can send control frames as well.
This fixes keepalive problems as observed with grpc-c, which can
send window update and ping frames after the response, see
http://mailman.nginx.org/pipermail/nginx/2018-August/056620.html.
Previously the preread phase code ignored NGX_AGAIN value returned from
c->recv() and relied only on c->read->ready. But this flag is not reliable and
should only be checked for optimization purposes. For example, when using
SSL, c->read->ready may be set when no input is available. This can lead to
calling preread handler infinitely in a loop.
The problem does not manifest itself currently, because in case of
non-buffered reading, chain link created by u->create_request method
consists of a single element.
Found by PVS-Studio.
The directive configures maximum number of requests allowed on
a connection kept in the cache. Once a connection reaches the number
of requests configured, it is no longer saved to the cache.
The default is 100.
Much like keepalive_requests for client connections, this is mostly
a safeguard to make sure connections are closed periodically and the
memory allocated from the connection pool is freed.
The directive configures maximum time a connection can be kept in the
cache. By configuring a time which is smaller than the corresponding
timeout on the backend side one can avoid the race between closing
a connection by the backend and nginx trying to use the same connection
to send a request at the same time.
LibreSSL 2.8.0 "added const annotations to many existing APIs from OpenSSL,
making interoperability easier for downstream applications". This includes
the const change in the SSL_CTX_sess_set_get_cb() callback function (see
9dd43f4ef67e), which breaks compilation.
To fix this, added a condition on how we redefine OPENSSL_VERSION_NUMBER
when working with LibreSSL (see 382fc7069e3a). With LibreSSL 2.8.0,
we now set OPENSSL_VERSION_NUMBER to 0x1010000fL (OpenSSL 1.1.0), so the
appropriate conditions in the code will use "const" as it happens with
OpenSSL 1.1.0 and later versions.
There are clients which cannot handle HPACK's dynamic table size updates
as added in 12cadc4669a7 (1.13.6). Notably, old versions of OkHttp library
are known to fail on it (ticket #1397).
This change makes it possible to work with such clients by only sending
dynamic table size updates in response to SETTINGS_HEADER_TABLE_SIZE. As
a downside, clients which do not use SETTINGS_HEADER_TABLE_SIZE will
continue to maintain default 4k table.
Previously, a chunk of spaces larger than NGX_CONF_BUFFER (4096 bytes)
resulted in the "too long parameter" error during parsing such a
configuration. This was because the code only set start and start_line
on non-whitespace characters, and hence adjacent whitespace characters
were preserved when reading additional data from the configuration file.
Fix is to always move start and start_line if the last character was
a space.
Early data AKA 0-RTT mode is enabled as long as "ssl_early_data on" is
specified in the configuration (default is off).
The $ssl_early_data variable evaluates to "1" if the SSL handshake
isn't yet completed, and can be used to set the Early-Data header as
per draft-ietf-httpbis-replay-04.
BoringSSL currently requires SSL_CTX_set_max_proto_version(TLS1_3_VERSION)
to be able to enable TLS 1.3. This is because by default max protocol
version is set to TLS 1.2, and the SSL_OP_NO_* options are merely used
as a blacklist within the version range specified using the
SSL_CTX_set_min_proto_version() and SSL_CTX_set_max_proto_version()
functions.
With this change, we now call SSL_CTX_set_max_proto_version() with an
explicit maximum version set. This enables TLS 1.3 with BoringSSL.
As a side effect, this change also limits maximum protocol version to
the newest protocol we know about, TLS 1.3. This seems to be a good
change, as enabling unknown protocols might have unexpected results.
Additionally, we now explicitly call SSL_CTX_set_min_proto_version()
with 0. This is expected to help with Debian system-wide default
of MinProtocol set to TLSv1.2, see
http://mailman.nginx.org/pipermail/nginx-ru/2017-October/060411.html.
Note that there is no SSL_CTX_set_min_proto_version macro in BoringSSL,
so we call SSL_CTX_set_min_proto_version() and SSL_CTX_set_max_proto_version()
as long as the TLS1_3_VERSION macro is defined.
The behaviour is now in line with COPY of a directory with contents,
which preserves access masks on individual files, as well as the "cp"
command.
Requested by Roman Arutyunyan.
This fixes wrong permissions and file time after cross-device MOVE
in the DAV module (ticket #1577). Broken in 8101d9101ed8 (0.8.9) when
cross-device copying was introduced in ngx_ext_rename_file().
With this change, ngx_copy_file() always calls ngx_set_file_time(),
either with the time provided, or with the time from the original file.
This is considered acceptable given that copying the file is costly anyway,
and optimizing cases when we do not need to preserve time will require
interface changes.
Previously, ngx_open_file(NGX_FILE_CREATE_OR_OPEN) was used, resulting
in destination file being partially rewritten if exists. Notably,
this affected WebDAV COPY command (ticket #1576).
Previously, "%uA" was used, which corresponds to ngx_atomic_uint_t.
Size of ngx_atomic_uint_t can be easily different from uint64_t,
leading to undefined results.
In TLSv1.3, NewSessionTicket messages arrive after the handshake and
can come at any time. Therefore we use a callback to save the session
when we know about it. This approach works for < TLSv1.3 as well.
The callback function is set once per location on merge phase.
Since SSL_get_session() in BoringSSL returns an unresumable session for
TLSv1.3, peer save_session() methods have been updated as well to use a
session supplied within the callback. To preserve API, the session is
cached in c->ssl->session. It is preferably accessed in save_session()
methods by ngx_ssl_get_session() and ngx_ssl_get0_session() wrappers.
In OpenSSL 1.1.0 the SSL_CTRL_CLEAR_OPTIONS macro was removed, so
conditional compilation test on it results in SSL_clear_options()
and SSL_CTX_clear_options() not being used. Notably, this caused
"ssl_prefer_server_ciphers off" to not work in SNI-based virtual
servers if server preference was switched on in the default server.
It looks like the only possible fix is to test OPENSSL_VERSION_NUMBER
explicitly.
Starting with OpenSSL 1.1.0, SSL_R_UNSUPPORTED_PROTOCOL instead of
SSL_R_UNKNOWN_PROTOCOL is reported when a protocol is disabled via
an SSL_OP_NO_* option.
Additionally, SSL_R_VERSION_TOO_LOW is reported when using MinProtocol
or when seclevel checks (as set by @SECLEVEL=n in the cipher string)
rejects a protocol, and this is what happens with SSLv3 and @SECLEVEL=1,
which is the default.
There is also the SSL_R_VERSION_TOO_HIGH error code, but it looks like
it is not possible to trigger it.
There should be at least one worker connection for each listening socket,
plus an additional connection for channel between worker and master,
or starting worker processes will fail.
Previously, listenings sockets were not cloned if the worker_processes
directive was specified after "listen ... reuseport".
This also simplifies upcoming configuration check on the number
of worker connections, as it needs to know the number of listening
sockets before cloning.
The variable keeps the latest SSL protocol version supported by the client.
The variable has the same format as $ssl_protocol.
The version is read from the client_version field of ClientHello. If the
supported_versions extension is present in the ClientHello, then the version
is set to TLSv1.3.
Errors when sending UDP datagrams can happen, e.g., when local IP address
changes (see fa0e093b64d7), or an unavailable DNS server on the LAN can cause
send() to fail with EHOSTDOWN on BSD systems. If this happens during
initial query, retry sending immediately, to a different DNS server when
possible. If this is not enough, allow normal resend to happen by ignoring
the return code of the second ngx_resolver_send_query() call, much like we
do in ngx_resolver_resend().
The "http request" and "https proxy request" errors cannot happen
with HTTP due to pre-handshake checks in ngx_http_ssl_handshake(),
but can happen when SSL is used in stream and mail modules.
With gRPC it is possible that a request sending is blocked due to flow
control. Moreover, further sending might be only allowed once the
backend sees all the data we've already sent. With such a backend
it is required to clear the TCP_NOPUSH socket option to make sure all
the data we've sent are actually delivered to the backend.
As such, we now clear TCP_NOPUSH in ngx_http_upstream_send_request()
also on NGX_AGAIN if c->write->ready is set. This fixes a test (which
waits for all the 64k bytes as per initial window before allowing more
bytes) with sendfile enabled when the body was written to a file
in a different context.
Now tcp_nopush on peer connections is disabled if it is disabled on
the client connection, similar to how we handle c->sendfile. Previously,
tcp_nopush was always used on upstream connections, regardless of
the "tcp_nopush" directive.
We copy input buffers to our buffers, so various flags might be
unexpectedly set in buffers returned by ngx_chain_get_free_buf().
In particular, the b->in_file flag might be set when the body was
written to a file in a different context. With sendfile enabled this
in turn might result in protocol corruption if such a buffer was reused
for a control frame.
Make sure to clear buffers and set only fields we really need to be set.
The module implements random load-balancing algorithm with optional second
choice. In the latter case, the best of two servers is chosen, accounting
number of connections and server weight.
Example:
upstream u {
random [two [least_conn]];
server 127.0.0.1:8080;
server 127.0.0.1:8081;
server 127.0.0.1:8082;
server 127.0.0.1:8083;
}
Before 4a8c9139e579, ngx_resolver_create() didn't use configuration
pool, and allocations were done using malloc().
In 016352c19049, when resolver gained support of several servers,
new allocations were done from the pool.
With u->conf->preserve_output set the request body file might be used
after the response header is sent, so avoid cleaning it. (Normally
this is not a problem as u->conf->preserve_output is only set with
r->request_body_no_buffering, but the request body might be already
written to a file in a different context.)
Previously, only one client packet could be processed in a udp stream session
even though multiple response packets were supported. Now multiple packets
coming from the same client address and port are delivered to the same stream
session.
If it's required to maintain a single stream of data, nginx should be
configured in a way that all packets from a client are delivered to the same
worker. On Linux and DragonFly BSD the "reuseport" parameter should be
specified for this. Other systems do not currently provide appropriate
mechanisms. For these systems a single stream of udp packets is only
guaranteed in single-worker configurations.
The proxy_response directive now specifies how many packets are expected in
response to a single client packet.
Previously, ngx_event_recvmsg() got remote socket addresses after creating
the connection object. In preparation to handling multiple UDP packets in a
single session, this code was moved up.
On Linux recvmsg() syscall may return a zero-length client address when
receiving a datagram from an unbound unix datagram socket. It is usually
assumed that socket address has at least the sa_family member. Zero-length
socket address caused buffer over-read in functions which receive socket
address, for example ngx_sock_ntop(). Typically the over-read resulted in
unexpected socket family followed by session close. Now a fake socket address
is allocated instead of a zero-length client address.
Negative times can appear since workers only update time on an event
loop iteration start. If a worker was blocked for a long time during
an event loop iteration, it is possible that another worker already
updated the time stored in the node. As such, time since last update
of the node (ms) will be negative.
Previous code used ngx_abs(ms) in the calculations. That is, negative
times were effectively treated as positive ones. As a result, it was
not possible to maintain high request rates, where the same node can be
updated multiple times from during an event loop iteration.
In particular, this affected setups with many SSL handshakes, see
http://mailman.nginx.org/pipermail/nginx/2018-May/056291.html.
Fix is to only update the last update time stored in the node if the
new time is larger than previously stored one. If a future time is
stored in the node, we preserve this time as is.
To prevent breaking things on platforms without monotonic time available
if system time is updated backwards, a safety limit of 60 seconds is
used. If the time stored in the node is more than 60 seconds in the future,
we assume that the time was changed backwards and update lr->last
to the current time.
