*) Feature: the "wait" parameter in the "include" SSI command.
*) Feature: the Ukrainian and Byelorussian characters were added to
koi-win conversion table.
*) Bugfix: in the SSI.
*) Feature: the "bind" option of the "listen" directive in IMAP/POP3
proxy.
*) Bugfix: if the same capture in the "rewrite" directive was used more
then once.
*) Bugfix: the $sent_http_content_type, $sent_http_content_length,
$sent_http_last_modified, $sent_http_connection,
$sent_http_keep_alive, and $sent_http_transfer_encoding variables
were not written to access log.
*) Bugfix: the $sent_http_cache_control returned value of the single
"Cache-Control" response header line.
*) Feature: the ngx_http_dav_module supports the MKCOL method.
*) Feature: the "create_full_put_path" directive.
*) Feature: the "$limit_rate" variable.
*) Feature: the "uninitialized_variable_warn" directive; the logging
level of the "uninitialized variable" message was lowered from
"alert" to "warn".
*) Feature: the "override_charset" directive.
*) Change: now if the unknown variable is used in the "echo" and "if
expr='$name'" SSI-commands, then the "unknown variable" message is
not logged.
*) Bugfix: the active connection counter increased on the exceeding of
the connection limit specified by the "worker_connections"
directive; the bug had appeared in 0.2.0.
*) Bugfix: the limit rate might not work on some condition; the bug had
appeared in 0.3.38.
*) Feature: the ngx_http_dav_module.
*) Change: the ngx_http_perl_module optimizations.
Thanks to Sergey Skvortsov.
*) Feature: the ngx_http_perl_module supports the $r->request_body_file
method.
*) Feature: the "client_body_in_file_only" directive.
*) Workaround: now on disk overflow nginx tries to write access logs
once a second only.
Thanks to Anton Yuzhaninov and Maxim Dounin.
*) Bugfix: now the "limit_rate" directive more precisely limits rate if
rate is more than 100 Kbyte/s.
Thanks to ForJest.
*) Bugfix: now the IMAP/POP3 proxy escapes the "\r" and "\n" symbols in
login and password to pass authorization server.
Thanks to Maxim Dounin.
*) Feature: the "limit_except" directive.
*) Feature: the "if" directive supports the "!~", "!~*", "-f", and
"!-f" operators.
*) Feature: the ngx_http_perl_module supports the $r->request_body
method.
*) Bugfix: in the ngx_http_addition_filter_module.
*) Feature: the ngx_http_addition_filter_module.
*) Feature: the "proxy_pass" and "fastcgi_pass" directives may be used
inside the "if" block.
*) Feature: the "proxy_ignore_client_abort" and
"fastcgi_ignore_client_abort" directives.
*) Feature: the "$request_completion" variable.
*) Feature: the ngx_http_perl_module supports the $r->request_method
and $r->remote_addr.
*) Feature: the ngx_http_ssi_module supports the "elif" command.
*) Bugfix: the "\/" string in the expression of the "if" command of the
ngx_http_ssi_module was treated incorrectly.
*) Bugfix: in the regular expressions in the "if" command of the
ngx_http_ssi_module.
*) Bugfix: if the relative path was specified in the
"client_body_temp_path", "proxy_temp_path", "fastcgi_temp_path", and
"perl_modules" directives, then the directory was used relatively to
a current path but not to a server prefix.
*) Feature: the "http_503" parameter of the "proxy_next_upstream" or
"fastcgi_next_upstream" directives.
*) Bugfix: ngx_http_perl_module did not work with inlined in the
configuration code, if it was not started with the "sub" word.
*) Bugfix: in the "post_action" directive.
*) Change: now nginx passes the malformed proxied backend responses.
*) Feature: the "listen" directives support the address in the "*:port"
form.
*) Feature: the EVFILER_TIMER support in MacOSX 10.4.
*) Workaround: for MacOSX 64-bit kernel kqueue millisecond timeout
bug.
Thanks to Andrei Nigmatulin.
*) Bugfix: if there were several "listen" directives listening one
various addresses inside one server, then server names like
"*.domain.tld" worked for first address only; the bug had appeared
in 0.3.18.
*) Bugfix: if the HTTPS protocol was used in the "proxy_pass" directive
and the request body was in temporarily file then the request was
not transferred.
*) Bugfix: perl 5.8.8 compatibility.
*) Feature: the "restrict_host_names" directive was canceled.
*) Feature: the --with-cpu-opt=ppc64 configuration parameter.
*) Bugfix: on some condition the proxied connection with a client was
terminated prematurely.
Thanks to Vladimir Shutoff.
*) Bugfix: the "X-Accel-Limit-Rate" header line was not taken into
account if the request was redirected using the "X-Accel-Redirect"
header line.
*) Bugfix: the "post_action" directive ran only after a successful
completion of a request.
*) Bugfix: the proxied response body generated by the "post_action"
directive was transferred to a client.
*) Change: the "variables_hash_max_size" and
"variables_hash_bucket_size" directives.
*) Feature: the $body_bytes_sent variable can be used not only in the
"log_format" directive.
*) Feature: the $ssl_protocol and $ssl_cipher variables.
*) Feature: the cache line size detection for widespread CPUs at start
time.
*) Feature: now the "accept_mutex" directive is supported using
fcntl(2) on platforms different from i386, amd64, sparc64, and ppc.
*) Feature: the "lock_file" directive and the --with-lock-path=PATH
autoconfiguration directive.
*) Bugfix: if the HTTPS protocol was used in the "proxy_pass" directive
then the requests with the body was not transferred.
*) Workaround: for bug in FreeBSD kqueue.
*) Bugfix: now a response generated by the "post_action" directive is
not transferred to a client.
*) Bugfix: the memory leaks were occurring if many log files were used.
*) Bugfix: the first "proxy_redirect" directive was working inside one
location.
*) Bugfix: on 64-bit platforms segmentation fault may occurred on start
if the many names were used in the "server_name" directives; the bug
had appeared in 0.3.18.
*) Feature: the ngx_http_perl_module supports the $r->args and
$r->unescape methods.
*) Feature: the method $r->query_string of ngx_http_perl_module was
canceled.
*) Bugfix: segmentation fault was occurred if the "none" or "blocked"
values was specified in the "valid_referers" directive; the bug had
appeared in 0.3.18.
*) Feature: the "path" and "alias" directives support the variables.
*) Change: now the "valid_referers" directive again checks the URI part.
*) Bugfix: in SSI handling.
*) Feature: the "server_names" directive supports the ".domain.tld"
names.
*) Feature: the "server_names" directive uses the hash for the
"*.domain.tld" names and more effective hash for usual names.
*) Change: the "server_names_hash_max_size" and
"server_names_hash_bucket_size" directives.
*) Change: the "server_names_hash" and "server_names_hash_threshold"
directives were canceled.
*) Feature: the "valid_referers" directive uses the hash site names.
*) Change: now the "valid_referers" directive checks the site names
only without the URI part.
*) Bugfix: some ".domain.tld" names incorrectly processed by the
ngx_http_map_module.
*) Bugfix: segmentation fault was occurred if configuration file did
not exist; the bug had appeared in 0.3.12.
*) Bugfix: on 64-bit platforms segmentation fault may occurred on
start; the bug had appeared in 0.3.16.
*) Change: now on Linux configure checks the presence of epoll and
sendfile64() in kernel.
*) Feature: the "map" directive supports domain names in the
".domain.tld" form.
*) Bugfix: the timeouts were not used in SSL handshake; the bug had
appeared in 0.2.4.
*) Bugfix: in the HTTPS protocol in the "proxy_pass" directive.
*) Bugfix: when the HTTPS protocol was used in the "proxy_pass"
directive the port 80 was used by default.
*) Feature: the ngx_http_map_module.
*) Feature: the "types_hash_max_size" and "types_hash_bucket_size"
directives.
*) Feature: the "ssi_value_length" directive.
*) Feature: the "worker_rlimit_core" directive.
*) Workaround: the connection number in logs was always 1 if nginx was
built by the icc 8.1 or 9.0 compilers with optimization for
Pentium 4.
*) Bugfix: the "config timefmt" SSI command set incorrect time format.
*) Bugfix: nginx did not close connection to IMAP/POP3 backend for the
SSL connections; the bug had appeared in 0.3.13.
Thanks to Rob Mueller.
*) Bugfix: segmentation fault may occurred in at SSL shutdown; the bug
had appeared in 0.3.13.
*) Feature: the IMAP/POP3 proxy supports STARTTLS and STLS.
*) Bugfix: the IMAP/POP3 proxy did not work with the select, poll, and
/dev/poll methods.
*) Bugfix: in SSI handling.
*) Bugfix: now Solaris sendfilev() is not used to transfer the client
request body to FastCGI-server via the unix domain socket.
*) Bugfix: the "auth_basic" directive did not disable the
authorization; the bug had appeared in 0.3.11.
*) Security: if nginx was built with the ngx_http_realip_module and the
"satisfy_any on" directive was used, then access and authorization
directives did not work. The ngx_http_realip_module was not built
and is not built by default.
*) Change: the "$time_gmt" variable name was changed to "$time_local".
*) Change: the "proxy_header_buffer_size" and
"fastcgi_header_buffer_size" directives was renamed to the
"proxy_buffer_size" and "fastcgi_buffer_size" directives.
*) Feature: the ngx_http_memcached_module.
*) Feature: the "proxy_buffering" directive.
*) Bugfix: the changes in accept mutex handling when the "rtsig" method
was used; the bug had appeared in 0.3.0.
*) Bugfix: if the client sent the "Transfer-Encoding: chunked" header
line, then nginx returns the 411 error.
*) Bugfix: if the "auth_basic" directive was inherited from the http
level, then the realm in the "WWW-Authenticate" header line was
without the "Basic realm" text.
*) Bugfix: if the "combined" format was explicitly specified in the
"access_log" directive, then the empty lines was written to the log;
the bug had appeared in 0.3.8.
*) Bugfix: nginx did not run on the sparc platform under any OS except
Solaris.
*) Bugfix: now it is not necessary to place space between the quoted
string and closing bracket in the "if" directive.
*) Change: the "valid_referers" directive and the "$invalid_referer"
variable were moved to the new ngx_http_referer_module from the
ngx_http_rewrite_module.
*) Change: the "$apache_bytes_sent" variable name was changed to
"$body_bytes_sent".
*) Feature: the "$sent_http_..." variables.
*) Feature: the "if" directive supports the "=" and "!=" operations.
*) Feature: the "proxy_pass" directive supports the HTTPS protocol.
*) Feature: the "proxy_set_body" directive.
*) Feature: the "post_action" directive.
*) Feature: the ngx_http_empty_gif_module.
*) Feature: the "worker_cpu_affinity" directive for Linux.
*) Bugfix: the "rewrite" directive did not unescape URI part in
redirect, now it is unescaped except the %00-%25 and %7F-%FF
characters.
*) Bugfix: nginx could not be built by the icc 9.0 compiler.
*) Bugfix: if the SSI was enabled for zero size static file, then the
chunked response was encoded incorrectly.
*) Security: nginx now checks URI got from a backend in
"X-Accel-Redirect" header line or in SSI file for the "/../" paths
and zeroes.
*) Change: nginx now does not treat the empty user name in the
"Authorization" header line as valid one.
*) Feature: the "ssl_session_timeout" directives of the
ngx_http_ssl_module and ngx_imap_ssl_module.
*) Feature: the "auth_http_header" directive of the
ngx_imap_auth_http_module.
*) Feature: the "add_header" directive.
*) Feature: the ngx_http_realip_module.
*) Feature: the new variables to use in the "log_format" directive:
$bytes_sent, $apache_bytes_sent, $status, $time_gmt, $uri,
$request_time, $request_length, $upstream_status,
$upstream_response_time, $gzip_ratio, $uid_got, $uid_set,
$connection, $pipe, and $msec. The parameters in the "%name" form
will be canceled soon.
*) Change: now the false variable values in the "if" directive are the
empty string "" and string starting with "0".
*) Bugfix: while using proxied or FastCGI-server nginx may leave
connections and temporary files with client requests in open state.
*) Bugfix: the worker processes did not flush the buffered logs on
graceful exit.
*) Bugfix: if the request URI was changes by the "rewrite" directive
and the request was proxied in location given by regular expression,
then the incorrect request was transferred to backend; the bug had
appeared in 0.2.6.
*) Bugfix: the "expires" directive did not remove the previous
"Expires" header.
*) Bugfix: nginx may stop to accept requests if the "rtsig" method and
several worker processes were used.
*) Bugfix: the "\"" and "\'" escape symbols were incorrectly handled in
SSI commands.
*) Bugfix: if the response was ended just after the SSI command and
gzipping was used, then the response did not transferred complete or
did not transferred at all.
*) Feature: the "access_log" supports the "buffer=" parameter.
*) Bugfix: nginx could not be built on platforms different from i386,
amd64, sparc, and ppc; the bug had appeared in 0.3.2.
*) Change: now the IMAP/POP3 proxy do not send the empty login to
authorization server.
*) Feature: the "log_format" supports the variables in the $name form.
*) Bugfix: if at least in one server was no the "listen" directive,
then nginx did not listen on the 80 port; the bug had appeared in
0.3.3.
*) Bugfix: if the URI part is omitted in "proxy_pass" directive, the
the 80 port was always used.
*) Change: the "bl" and "af" parameters of the "listen" directive was
renamed to the "backlog" and "accept_filter".
*) Feature: the "rcvbuf" and "sndbuf" parameters of the "listen"
directive.
*) Change: the "$msec" log parameter does not require now the
additional the gettimeofday() system call.
*) Feature: the -t switch now tests the "listen" directives.
*) Bugfix: if the invalid address was specified in the "listen"
directive, then after the -HUP signal nginx left an open socket in
the CLOSED state.
*) Bugfix: the mime type may be incorrectly set to default value for
index file with variable in the name; the bug had appeared in 0.3.0.
*) Feature: the "timer_resolution" directive.
*) Feature: the millisecond "$upstream_response_time" log parameter.
*) Bugfix: a temporary file with client request body now is removed
just after the response header was transferred to a client.
*) Bugfix: OpenSSL 0.9.6 compatibility.
*) Bugfix: the SSL certificate and key file paths could not be relative.
*) Bugfix: the "ssl_prefer_server_ciphers" directive did not work in
the ngx_imap_ssl_module.
*) Bugfix: the "ssl_protocols" directive allowed to specify the single
protocol only.
*) Feature: the Sun Studio 10 C compiler support.
*) Feature: the "proxy_upstream_max_fails",
"proxy_upstream_fail_timeout", "fastcgi_upstream_max_fails", and
"fastcgi_upstream_fail_timeout" directives.
*) Change: while using load-balancing the time before the failed
backend retry was decreased from 60 to 10 seconds.
*) Change: the "proxy_pass_unparsed_uri" was canceled, the original URI
now passed, if the URI part is omitted in "proxy_pass" directive.
*) Feature: the "error_page" directive supports redirects and allows
more flexible to change an error code.
*) Change: the charset in the "Content-Type" header line now is ignored
in proxied subrequests.
*) Bugfix: if the URI was changed in the "if" block and request did not
found new configuration, then the ngx_http_rewrite_module rules ran
again.
*) Bugfix: if the "set" directive set the ngx_http_geo_module variable
in some configuration part, the this variable was not available in
other configuration parts and the "using uninitialized variable"
error was occurred; the bug had appeared in 0.2.2.
*) The pid-file names used during online upgrade was changed and now is
not required a manual rename operation. The old master process adds
the ".oldbin" suffix to its pid-file and executes a new binary file.
The new master process creates usual pid-file without the ".newbin"
suffix. If the master process exits, then old master process renames
back its pid-file with the ".oldbin" suffix to the pid-file without
suffix.
*) Change: the "worker_connections" directive, new name of the
"connections" directive; now the directive specifies maximum number
of connections, but not maximum socket descriptor number.
*) Feature: SSL supports the session cache inside one worker process.
*) Feature: the "satisfy_any" directive.
*) Change: the ngx_http_access_module and ngx_http_auth_basic_module do
not run for subrequests.
*) Feature: the "worker_rlimit_nofile" and "worker_rlimit_sigpending"
directives.
*) Bugfix: if all backend using in load-balancing failed after one
error, then nginx did not try do connect to them during 60 seconds.
*) Bugfix: in IMAP/POP3 command argument parsing.
Thanks to Rob Mueller.
*) Bugfix: errors while using SSL in IMAP/POP3 proxy.
*) Bugfix: errors while using SSI and gzipping.
*) Bugfix: the "Expires" and "Cache-Control" header lines were omitted
from the 304 responses.
Thanks to Alexandr Kukushkin.
*) Change: the "ssl_engine" directive was canceled in the
ngx_http_ssl_module and now is introduced at global level.
*) Bugfix: the responses with SSI subrequests did not transferred via
SSL connection.
*) Various bug fixes in the IMAP/POP3 proxy.
*) Feature: the IMAP/POP3 proxy supports SSL.
*) Feature: the "proxy_timeout" directive of the ngx_imap_proxy_module.
*) Feature: the "userid_mark" directive.
*) Feature: the $remote_user variable value is determined independently
of authorization use.
*) The changes in the ngx_http_charset_module: the "default_charset"
directive was canceled; the "charset" directive sets the response
charset; the "source_charset" directive sets the source charset only.
*) Bugfix: the backend "WWW-Authenticate" header line did not
transferred while the 401 response code redirecting.
*) Bugfix: the ngx_http_proxy_module and ngx_http_fastcgi_module may
close a connection before anything was transferred to a client; the
bug had appeared in 0.1.38.
*) Workaround: the Linux glibc crypt_r() initialization bug.
*) Bugfix: the ngx_http_ssi_module did not support the relative URI in
the "include virtual" command.
*) Bugfix: if the backend response had the "Location" header line and
nginx should not rewrite this line, then the 500 code response body
was transferred; the bug had appeared in 0.1.29.
*) Bugfix: some directives of the ngx_http_proxy_module and
ngx_http_fastcgi_module were not inherited from the server to the
location level; the bug had appeared in 0.1.29.
*) Bugfix: the ngx_http_ssl_module did not support the certificate
chain.
*) Bugfix: the ngx_http_autoindex_module did not show correctly the
long file names; the bug had appeared in 0.1.38.
*) Bugfixes in IMAP/POP3 proxy in interaction with a backend at the
login state.
*) Change: if the request header has duplicate the "Host",
"Connection", "Content-Length", or "Authorization" lines, then nginx
now returns the 400 error.
*) Change: the "post_accept_timeout" directive was canceled.
*) Feature: the "default", "af=", "bl=", "deferred", and "bind"
parameters of the "listen" directive.
*) Feature: the FreeBSD accept filters support.
*) Feature: the Linux TCP_DEFER_ACCEPT support.
*) Bugfix: the ngx_http_autoindex_module did not support the file names
in UTF-8.
*) Bugfix: the new log file can be rotated by the -USR1 signal only if
the reconfiguration by the -HUP signal was made twice.
*) Feature: the "working_directory" directive.
*) Feature: the "port_in_redirect" directive.
*) Bugfix: the segmentation fault was occurred if the backend response
header was in several packets; the bug had appeared in 0.1.29.
*) Bugfix: if more than 10 servers were configured or some server did
not use the "listen" directive, then the segmentation fault was
occurred on the start.
*) Bugfix: the segmentation fault might occur if the response was
bigger than the temporary file.
*) Bugfix: nginx returned the 400 response on requests like
"GET http://www.domain.com/uri HTTP/1.0"; the bug had appeared in
0.1.28.
*) Bugfix: the worker process may got caught in an endless loop if the
big response part were include by SSI.
*) Bugfix: the variables set by the "set" directive were not available
in SSI.
*) Feature: the "autoindex_localtime" directive.
*) Bugfix: the empty value of the "proxy_set_header" directive forbids
the client request header line passing.
*) Bugfix: nginx could not be built with the --without-pcre parameter;
the bug had appeared in 0.1.29.
*) Bugfix: 3, 4, 7, and 8 the "proxy_set_header" directives in one
level cause the bus fault on start up.
*) Bugfix: the HTTP protocol was specified in the HTTPS redirects.
*) Bugfix: if the "rewrite" directive used the captures inside the "if"
directive, then the 500 error code was returned.
*) Bugfix: the arguments were omitted in the redirects, issued by the
"rewrite" directive; the bug had appeared in 0.1.29.
*) Feature: the "if" directive supports the captures in regular
expressions.
*) Feature: the "set" directive supports the variables and the captures
of regular expressions.
*) Feature: the "X-Accel-Redirect" response header line is supported in
proxy and FastCGI mode.
*) Feature: the ngx_http_ssi_module supports "include virtual" command.
*) Feature: the ngx_http_ssi_module supports the condition command like
'if expr="$NAME"' and "else" and "endif" commands. Only one nested
level is supported.
*) Feature: the ngx_http_ssi_module supports the DATE_LOCAL and
DATE_GMT variables and "config timefmt" command.
*) Feature: the "ssi_ignore_recycled_buffers" directive.
*) Bugfix: the "echo" command did not show the default value for the
empty QUERY_STRING variable.
*) Change: the ngx_http_proxy_module was rewritten.
*) Feature: the "proxy_redirect", "proxy_pass_request_headers",
"proxy_pass_request_body", and "proxy_method" directives.
*) Feature: the "proxy_set_header" directive. The "proxy_x_var" was
canceled and must be replaced with the proxy_set_header directive.
*) Change: the "proxy_preserve_host" is canceled and must be replaced
with the "proxy_set_header Host $host" and the "proxy_redirect off"
directives, the "proxy_set_header Host $host:$proxy_port" directive
and the appropriate proxy_redirect directives.
*) Change: the "proxy_set_x_real_ip" is canceled and must be replaced
with the "proxy_set_header X-Real-IP $remote_addr" directive.
*) Change: the "proxy_add_x_forwarded_for" is canceled and must be
replaced with
the "proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for"
directive.
*) Change: the "proxy_set_x_url" is canceled and must be replaced with
the "proxy_set_header X-URL http://$host:$server_port$request_uri"
directive.
*) Feature: the "fastcgi_param" directive.
*) Change: the "fastcgi_root", "fastcgi_set_var" and "fastcgi_params"
directive are canceled and must be replaced with the fastcgi_param
directives.
*) Feature: the "index" directive can use the variables.
*) Feature: the "index" directive can be used at http and server levels.
*) Change: the last index only in the "index" directive can be absolute.
*) Feature: the "rewrite" directive can use the variables.
*) Feature: the "internal" directive.
*) Feature: the CONTENT_LENGTH, CONTENT_TYPE, REMOTE_PORT, SERVER_ADDR,
SERVER_PORT, SERVER_PROTOCOL, DOCUMENT_ROOT, SERVER_NAME,
REQUEST_METHOD, REQUEST_URI, and REMOTE_USER variables.
*) Change: nginx now passes the invalid lines in a client request
headers or a backend response header.
*) Bugfix: if the backend did not transfer response for a long time and
the "send_timeout" was less than "proxy_read_timeout", then nginx
returned the 408 response.
*) Bugfix: the segmentation fault was occurred if the backend sent an
invalid line in response header; the bug had appeared in 0.1.26.
*) Bugfix: the segmentation fault may occurred in FastCGI fault
tolerance configuration.
*) Bugfix: the "expires" directive did not remove the previous
"Expires" and "Cache-Control" headers.
*) Bugfix: nginx did not take into account trailing dot in "Host"
header line.
*) Bugfix: the ngx_http_auth_module did not work under Linux.
*) Bugfix: the rewrite directive worked incorrectly, if the arguments
were in a request.
*) Bugfix: nginx could not be built on MacOS X.
*) Change: the invalid client header lines are now ignored and logged
at the info level.
*) Change: the server name is also logged in error log.
*) Feature: the ngx_http_auth_basic_module module and the auth_basic
and auth_basic_user_file directives.
*) Bugfix: nginx did run on Linux parisc.
*) Feature: nginx now does not start under FreeBSD if the sysctl
kern.ipc.somaxconn value is too big.
*) Bugfix: if a request was internally redirected by the
ngx_http_index_module module to the ngx_http_proxy_module or
ngx_http_fastcgi_module modules, then the index file was not closed
after request completion.
*) Feature: the "proxy_pass" can be used in location with regular
expression.
*) Feature: the ngx_http_rewrite_filter_module module supports the
condition like "if ($HTTP_USER_AGENT ~ MSIE)".
*) Bugfix: nginx started too slow if the large number of addresses and
text values were used in the "geo" directive.
*) Change: a variable name must be declared as "$name" in the "geo"
directive. The previous variant without "$" is still supported, but
will be removed soon.
*) Feature: the "%{VARIABLE}v" logging parameter.
*) Feature: the "set $name value" directive.
*) Bugfix: gcc 4.0 compatibility.
*) Feature: the --with-openssl-opt=OPTIONS autoconfiguration directive.
*) Feature: the ngx_http_ssi_filter_module supports the QUERY_STRING
and DOCUMENT_URI variables.
*) Bugfix: the ngx_http_autoindex_module may some times return the 404
response for existent directory, if this directory was used in
"alias" directive.
*) Bugfix: the ngx_http_ssi_filter_module ran incorrectly for large
responses.
*) Bugfix: the lack of the "Referer" header line was always accounted
as valid referrer.
*) Feature: the ngx_http_ssi_filter_module and the ssi,
ssi_silent_errors, and ssi_min_file_chunk directives. The 'echo
var="HTTP_..." default=""' and 'echo var="REMOTE_ADDR"' commands are
supported.
*) Feature: the %request_time log parameter.
*) Feature: if the request has no the "Host" header line, then the
"proxy_preserve_host" directive set this header line to the first
server name of the "server_name" directive.
*) Bugfix: nginx could not be built on platforms different from i386,
amd64, sparc, and ppc; the bug had appeared in 0.1.22.
*) Bugfix: the ngx_http_autoindex_module now shows the information not
about the symlink, but about file or directory it points to.
*) Bugfix: the %apache_length parameter logged the negative length of
the response header if the no response was transferred to a client.
*) Bugfix: the ngx_http_stub_status_module showed incorrect handled
connections statistics if the proxying or FastCGI server were used.
*) Bugfix: the installation paths were incorrectly quoted on Linux and
Solaris; the bug had appeared in 0.1.21.
*) Bugfix: the ngx_http_stub_status_module showed incorrect statistics
if "rtsig" method was used or if several worker process ran on SMP.
*) Bugfix: nginx could not be built by the icc compiler on Linux or if
the zlib-1.2.x library was building from sources.
*) Bugfix: nginx could not be built on NetBSD 2.0.
*) Bugfix: now, if request contains the zero, then the 404 error is
returned for the local requests.
*) Bugfix: nginx could not be built on NetBSD 2.0.
*) Bugfix: the timeout may occur while reading of the the client
request body via SSL connections.
*) Workaround: the default values of the devpoll_events and the
devpoll_changes directives changed from 512 to 32 to be compatible
with Solaris 10.
*) Bugfix: the proxy_set_x_var and fastcgi_set_var directives were not
inherited.
*) Bugfix: in the redirect rewrite directive the arguments were
concatenated with URI by the "&" rather than the "?".
*) Bugfix: the lines without trailing ";" in the file being included by
the ngx_http_geo_module were silently ignored.
*) Feature: the ngx_http_stub_status_module.
*) Bugfix: the unknown log format in the access_log directive caused
the segmentation fault.
*) Feature: the new "document_root" parameter of the fastcgi_params
directive.
*) Feature: the fastcgi_redirect_errors directive.
*) Feature: the new "break" modifier of the "rewrite" directive allows
to stop the rewrite/location cycle and sets the current
configuration to the request.
*) Change: the ngx_http_rewrite_module was rewritten from the scratch.
Now it is possible to redirect, to return the error codes, to check
the variables and referrers. The directives can be used inside
locations. The redirect directive was canceled.
*) Feature: the ngx_http_geo_module.
*) Feature: the proxy_set_x_var and fastcgi_set_var directives.
*) Bugfix: the location configuration with "=" modifier may be used in
another location.
*) Bugfix: the correct content type was set only for requests that use
small caps letters in extension.
*) Bugfix: if the proxy_pass or fastcgi_pass directives were set in the
location, and access was denied, and the error was redirected to a
static page, then the segmentation fault occurred.
*) Bugfix: if in a proxied "Location" header was a relative URL, then a
host name and a slash were added to them; the bug had appeared in
0.1.14.
*) Bugfix: the system error message was not logged on Linux.
*) Bugfix: if the response were transferred by chunks, then on the HEAD
request the final chunk was issued.
*) Bugfix: the "Connection: keep-alive" header were issued, even if the
keepalive_timeout directive forbade the keep-alive use.
*) Bugfix: the errors in the ngx_http_fastcgi_module caused the
segmentation faults.
*) Bugfix: the compressed response encrypted by SSL may not transferred
complete.
*) Bugfix: the TCP-specific TCP_NODELAY, TCP_NOPSUH, and TCP_CORK
options, are not used for the unix domain sockets.
*) Feature: the rewrite directive supports the arguments rewriting.
*) Bugfix: the response code 400 was returned for the POST request with
the "Content-Length: 0" header; the bug had appeared in 0.1.14.
