Make sure values removed from a map during apply are not copied into the
new map. The broken test is no longer valid in this case, and the
updated diff.Apply should prevent the case it used to cover.
In study of existing providers we've found a pattern we werent previously
accounting for of using a nested block type to represent a group of
arguments that relate to a particular feature that is always enabled but
where it improves configuration readability to group all of its settings
together in a nested block.
The existing NestingSingle was not a good fit for this because it is
designed under the assumption that the presence or absence of the block
has some significance in enabling or disabling the relevant feature, and
so for these always-active cases we'd generate a misleading plan where
the settings for the feature appear totally absent, rather than showing
the default values that will be selected.
NestingGroup is, therefore, a slight variation of NestingSingle where
presence vs. absence of the block is not distinguishable (it's never null)
and instead its contents are treated as unset when the block is absent.
This then in turn causes any default values associated with the nested
arguments to be honored and displayed in the plan whenever the block is
not explicitly configured.
The current SDK cannot activate this mode, but that's okay because its
"legacy type system" opt-out flag allows it to force a block to be
processed in this way anyway. We're adding this now so that we can
introduce the feature in a future SDK without causing a breaking change
to the protocol, since the set of possible block nesting modes is not
extensible.
Stripping these was a patch for some provider behavior which was fixed
in other ways, and is no longer needed.
Removing this allows us to implement correct CusomizeDiffFuncs in
providers so that they can mark fields with empty values as computed
during a plan.
A list-like attribute containing null values will present a list to
helper/schema with nils, which can cause panics. Since null values were
not possible in configuration before HCL2 and not supported by the
legacy SDK, return an error to the user.
It turns out that collections containing only unknowns could be lost,
meaning there wasn't a direct correlation between the unknown and null
value which would have otherwise been restored.
The legacy diff process inserts unknown values into an optional+computed
map. Fix these up in post-plan normalization process, by looking for
known strings that were changed to unknown.
Because schema.ResourceDiff can't differentiate between unknown
values and new computed values, unknowns can be lost during an update.
If a planned value converted an unknown to a null, restore the unknown
so that it can be correctly replaced in the final plan.
The previous commit added this flag but did not implement it. Here we
implement it by adjusting the shape of schema we return to Terraform Core
to mark the attribute as untyped and then ensure that gets handled
correctly on the SDK side.
The previous commit added a new flag to schema.Schema which is documented
to make a list with MaxItems: 1 be presented to Terraform Core as a single
value instead, giving a way to switch to non-list nested resources without
it being a breaking change for Terraform v0.11 users as long as it's done
prior to a provider's first v0.12-compatible release.
This is the implementation of that mechanism. It's intentionally
implemented as a suite of extra fixups rather than direct modifications to
existing shim code because we want to ensure that this has no effect
whatsoever on the result of a resource type that _isn't_ using AsSingle.
Although there is some small unit test coverage of the fixup steps here,
the primary testing for this is in the test provider since the integration
of all of these fixup steps in the correct order is the more important
result than any of the intermediate fixup steps.
This will allow resources to return an unexpected change to set blocks
and attributes, otherwise we could mask these changes during
normalization.
Change the "plan" argument in normalizeNullValues to "preferDst" to more
accurately describe what the option is doing, since it no longer applies
only to PlanResourceChange.
This should be the final change from removing the flatmap normalization.
Since we're no longer trying to a consistent zero or null value in the
flatmap config, rather we're trying to maintain the previously applied
value, ReadResource also needs to apply the normalizeNullValues step in
order to prevent unexpected diffs.
This method was added early on when the diff was being applied as the
legacy code would have done, which is no longer the case. Everything
that normalizeFlatmapContainers does should be covered by the
combination of the initial diff.Apply and the normalizeNullValues on the
final cty.Value.
As we've improved the cty.Value normalization, we need to remove
normalization procedures from the flatmap handling. Keeping the empty
containers in the flatmap will prevent unexpected nils from being added
to some schema configurations
Use objchange.NormalizeObjectFromLegacySDK to ensure that all objects
returned from the provider match what is expected based on the
configuration according to the schemas.
Providers were not strict (and were not forced to be) about customizing
the diff when a computed attribute needed to be updated during apply.
The fix we have in place to prevent loss of information during the
helper/schema apply process would add in single missing value back in.
The first place this was caught was when we attempt to fix up the
flatmapped attributes. The 1->0 count error is now better handled by our
cty.Value normalization step, so we can remove the special apply case
here altogether
The next place is in normalizeNullValues, and since the intent was to
re-insert missing zero-value lists and sets, adding a check for a length
of 0 protects us from adding in extra elements.
The new test fixture emulated common provider behavior of re-computing
values without customizing the diff. Since we can work around it, and
core will provider appropriate warnings, the shims should try to
maintain the legacy behavior.
The NewExtra values are stored outside the diff from plan, and the
original keys may not contain the ~ prefix. Adding the NewExtra back
into the diff with the mismatched key was causing an entire new set
element to be populated. Since this symbol isn't used to apply the diff
in helper/schema, we can simply strip them out.
The hcl2shims will always add in the timeouts block, because there's no
way to differentiate a null single block from an empty one in the
flatmapped state. Since we are only concerned with keeping the prior
timeouts value, always set the new value to null, and then copy over the
prior value if it exists.
The new normalization should make preventing those changes unnecessary,
and will also prevent extra empty elements from being added when
resources are refreshed.
cty.Value.AsValueMap can return nil if called on an empty map or object.
The logic above was dealing with that case for maps, but object types
were falling through into this codepath and panicking when trying to
assign a new key into the nil dstMap.
This also includes a bonus fix where we were calling ty.ElementType in
a switch case that accepts object types. Object types don't have a single
element type, so we can't call ElementType on those (that also panics)
but we _can_ use the type of the value we selected from src to construct
our placeholder null value.
Due to the inprecision of our shimming from the legacy SDK type system to
the new Terraform Core type system, the legacy SDK produces a number of
inconsistencies that produce only minor quirky behavior or broken
edge-cases. To retain compatibility with those existing weird behaviors,
the legacy SDK opts out of our safety checks.
The intent here is to allow existing providers to continue to do their
previous unsafe behaviors for now, accepting that this will allow certain
quirky bugs from previous releases to persist, and then gradually migrate
away from the legacy SDK and remove this opt-out on a per-resource basis
over time.
As with the apply-time safety check opt-out, this is reserved only for
the legacy SDK and must not be used in any new SDK implementations. We
still include any inconsistencies as warnings in the logs as an aid to
anyone debugging weird behavior, so that they can see situations where
blame may be misplaced in the user-visible error messages.
Terraform core expects a sane state even when the provider returns an
error. Make sure at the prior state is always the default value to
return, and then alway attempt to process any state returned by
provider.Apply.
Check attributes on null objects, and fill in unknowns. If we're
evaluating the object, it either means we are at the top level, or a
NestingSingle block was present, and in either case we need to treat the
attributes as null rather than the entire object.
Switch on the block types rather than Nesting, so we don't need add any
logic to change between List/Tuple or Map/Object when DynamicPseudoType
is involved.
The shim layer for the legacy SDK type system is not precise enough to
guarantee it will produce identical results between plan and apply. In
particular, values that are null during plan will often become zero-valued
during apply.
To avoid breaking those existing providers while still allowing us to
introduce this check in the future, we'll introduce a rather-hacky new
flag that allows the legacy SDK to signal that it is the legacy SDK and
thus disable the check.
Once we start phasing out the legacy SDK in favor of one that natively
understands our new type system, we can stop setting this flag and thus
get the additional safety of this check without breaking any
previously-released providers.
No other SDK is permitted to set this flag, and we will remove it if we
ever introduce protocol version 6 in future, assuming that any provider
supporting that protocol will always produce consistent results.
This turns it on at the last moment, and in one place for all uses of
helper/schema. There's no way to use the new protocol without calling
GetSchema, so we can be sure that any subsequent api calls have this set
when required.
Previously we were using the type name requested in the import to select
the schema, but a provider is free to return additional objects of other
types as part of an import result, and so it's important that we perform
schema selection separately for each returned object.
If we don't do this, we get confusing downstream errors where the
resulting object decodes to the wrong type and breaks various invariants
expected by Terraform Core.
The testResourceImportOther test in the test provider didn't catch this
previously because it happened to have an identical schema to the other
resource type being imported. Now the schema is changed and also there's
a computed attribute we can set as part of the refresh phase to make sure
we're completing the Read call properly during import. Refresh was working
correctly, but we didn't have any tests for it as part of the import flow.
While copyMissingValues was meant to re-insert empty values that were
null after apply, it turns out plan is sometimes not predictable as
well.
normalizeNullValue is meant to fix up any null/empty transitions between
to values, and be useful during plan as well. For plan the function only
concerns itself with individual, known values, and skips sets entirely.
The result of running with plan == true is that only changes between
empty and null collections should be fixed.
With the new diff.Apply we can keep the diff mostly intact, but we need
turn off all RequiresNew flags so that the prior state is not removed
from the apply.
One quirky aspect of our import feature is that we allow the importer to
produce additional resources alongside the one that was imported, such as
to create separate rules for each rule of an imported security group.
Providers need to be able to set the types of these other resources since
they may not match the "main" resource type. They do this by calling
ResourceData.SetType, which in turn sets InstanceState.Ephemeral.Type.
In our shims here we therefore need to copy that out into our new TypeName
field so that the new core import code can see it and create the right
type in the state.
Testing this required a minor change to the test harness to allow the
ImportStateCheck function to see the resource type.
Our new diff handling no longer requires stripping the empty diffs out,
and provider may be relying on some of the empty-value quirks in
helper/schema.
Due to various inprecisions in the old SDK implementation, applying the
generated diff can potentially make changes to the data structure that
have no real effect, such as replacing an empty list with a null list or
vice-versa.
Although we can't totally eliminate such diff noise, here we attempt to
avoid it in situations where there are _only_ meaningless changes -- where
the prior state and planned state are equivalent -- by just echoing back
the prior state verbatim to ensure that Terraform will treat it as a noop
change.
If there _are_ some legitimate changes then the result may still contain
meaningless changes alongside it, but that is just a cosmetic problem for
the diff renderer, because the meaningless changes will be ignored
altogether during a subsequent apply anyway. The primary goal here is just
to ensure we can converge on a fixpoint when there are no explicit changes
in the configuration.
