This is part of a general effort to move all of Terraform's non-library
package surface under internal in order to reinforce that these are for
internal use within Terraform only.
If you were previously importing packages under this prefix into an
external codebase, you could pin to an earlier release tag as an interim
solution until you've make a plan to achieve the same functionality some
other way.
This is a light revamp of our plan output to make use of Terraform core's
new ability to report both the previous run state and the refreshed state,
allowing us to explicitly report changes made outside of Terraform.
Because whether a plan has "changes" or not is no longer such a
straightforward matter, this now merges views.Operation.Plan with
views.Operation.PlanNoChanges to produce a single function that knows how
to report all of the various permutations. This was also an opportunity
to fill some holes in our previous logic which caused it to produce some
confusing messages, including a new tailored message for when
"terraform destroy" detects that nothing needs to be destroyed.
This also allows users to request the refresh-only planning mode using a
new -refresh-only command line option. In that case, Terraform _only_
performs drift detection, and so applying a refresh-only plan only
involves writing a new state snapshot, without changing any real
infrastructure objects.
* Add helper suggestion when failed registry err
When someone has a failed registry error on init, remind them that
they should have required_providers in every module
* Give suggestion for a provider based on reqs
Suggest another provider on a registry error, from the list of
requirements we have on init. This skips the legacy lookup
process if there is a similar provider existing in requirements.
* Add support for plugin protocol v6
This PR turns on support for plugin protocol v6. A provider can
advertise itself as supporting protocol version 6 and terraform will
use the correct client.
Todo:
The "unmanaged" providers functionality does not support protocol
version, so at the moment terraform will continue to assume that
"unmanaged" providers are on protocol v5. This will require some
upstream work on go-plugin (I believe).
I would like to convert the builtin providers to use protocol v6 in a
future PR; however it is not necessary until we remove protocol v6.
* add e2e test for using both plugin protocol versions
- copied grpcwrap and made a version that returns protocol v6 provider
- copied the test provider, provider-simple, and made a version that's
using protocol v6 with the above fun
- added an e2etest
Commit e865faf adds visual indentation for diagnostic messages using various
vertical line characters. The present commit disables this behaviour when
running with colourised output disabled.
While the contents of stderr are not intended to be part of the Terraform API,
this is currently how the hashicorp/terraform-exec library detects certain
error types in order to present them as well-known Go errors to the user. Such
detection is complicated when vertical lines are added to the CLI output at
unpredictable points.
I expect this change will also be helpful for screen reader users.
I frequently see people attempting to ask questions about Terraform's
error and warning messages but either only copying part of the message or
accidentally copying a surrounding paragraph that isn't part of the
message.
While I'm sure some of these are just "careless" mistakes, I've also
noticed that this has sometimes overlapped with someone asking a question
whose answer is written directly in the part of the message they didn't
include when copying, and so I have a theory that our current output
doesn't create a good enough visual hierarchy for sighted users to
understand where the diagnostic messages start and end when we show them
in close proximity to other content, or to other diagnostic messages.
As a result, some folks fail to notice the relevant message that might've
answered their question.
I tried a few different experiments for different approaches here, such
as adding more horizontal rules to the output and coloring the detail
text differently, but the approach that felt like the nicest compromise
to me was what's implemented here, which is to add a vertical line
along the left edge of each diagnostic message, colored to match with the
typical color we use for each diagnostic severity. This means that the
diagnostics end up slightly indented from what's around them, and the
vertical line seems to help subtly signal how we intended the content
to be grouped together.
We now require the output to accept UTF-8 and we can determine how wide
the terminal (if any) is, so here we begin to make use of that for the
"terraform plan" command.
The horizontal rule is now made of box drawing characters instead of
hyphens and fills the whole terminal width.
The paragraphs of text in the output are now also wrapped to fill the
terminal width, instead of the hard-wrapping we did before.
This is just a start down the road of making better use of the terminal
capabilities. Lots of other commands could benefit from updates like these
too.
If you run the e2etests locally and use a configured plugin_cache_dir,
the test will leave a bad directory behind in your cache dir that causes
later `init`s to fail. To circumvent this, pass an explicity-empty CLI
config file.
This is a nicety for local developers and not necessarily required, but
it happens to me often enough that I'd like to fix it. It's probably not
a *bad* idea to pass an explicit cli config to all e2etests, honestly,
but this is the only one that causes active problems so I limited this
PR to that one test.
Here's the error which occurs on subsequent `init` if this test is run on a
machine that uses a plugin cache dir:
2020/10/13 10:41:05 [TRACE] providercache.fillMetaCache: error while scanning directory /Users/mildwonkey/.terraform.d/plugin-cache: failed to read metadata about /Users/mildwonkey/.terraform.d/plugin-cache/example.com/awesomecorp/happycloud/1.2.0/darwin_amd64: stat /Users/mildwonkey/.terraform.d/plugin-cache/example.com/awesomecorp/happycloud/1.2.0/darwin_amd64: no such file or directory
For normal provider installation we want to associate each provider with
a selected version number and find a suitable package for that version
that conforms to the official hashes for that release.
Those requirements are very onerous for a provider developer currently
testing a not-yet-released build, though. To allow for that case this new
CLI configuration feature allows overriding specific providers to refer
to give local filesystem directories.
Any provider overridden in this way is not subject to the usual
restrictions about selected versions or checksum conformance, and
activating an override won't cause any changes to the selections recorded
in the lock file because it's intended to be a temporary setting for one
developer only.
This is, in a sense, a spiritual successor of an old capability we had to
override specific plugins in the CLI configuration file. There were
some vestiges of that left in the main package and CLI config package
but nothing has actually been honoring them for several versions now and
so this commit removes them to avoid confusion with the new mechanism.
Terraform v0.10 introduced .terraform/plugins as a cache directory for
automatically-installed plugins, Terraform v0.13 later reorganized the
directory structure inside but retained its purpose as a cache.
The local cache used to also serve as a record of specifically which
packages were selected in a particular working directory, with the intent
that a second run of "terraform init" would always select the same
packages again. That meant that in some sense it behaved a bit like a
local filesystem mirror directory, even though that wasn't its intended
purpose.
Due to some unfortunate miscommunications, somewhere a long the line we
published some documentation that _recommended_ using the cache directory
as if it were a filesystem mirror directory when working with Terraform
Cloud. That was really only working as an accident of implementation
details, and Terraform v0.14 is now going to break that because the source
of record for the currently-selected provider versions is now the
public-facing dependency lock file rather than the contents of an existing
local cache directory on disk.
After some consideration of how to move forward here, this commit
implements a compromise that tries to avoid silently doing anything
surprising while still giving useful guidance to folks who were previously
using the unsupported strategy. Specifically:
- The local cache directory will now be .terraform/providers rather than
.terraform/plugins, because .terraform/plugins is effectively "poisoned"
by the incorrect usage that we can't reliably distinguish from prior
version correct usage.
- The .terraform/plugins directory is now the "legacy cache directory". It
is intentionally _not_ now a filesystem mirror directory, because that
would risk incorrectly interpreting providers automatically installed
by Terraform v0.13 as if they were a local mirror, and thus upgrades
and checksum fetches from the origin registry would be blocked.
- Because of the previous two points, someone who _was_ trying to use the
legacy cache directory as a filesystem mirror would see installation
fail for any providers they manually added to the legacy directory.
To avoid leaving that user stumped as to what went wrong, there's a
heuristic for the case where a non-official provider fails installation
and yet we can see it in the legacy cache directory. If that heuristic
matches then we'll produce a warning message hinting to move the
provider under the terraform.d/plugins directory, which is a _correct_
location for "bundled" provider plugins that belong only to a single
configuration (as opposed to being installed globally on a system).
This does unfortunately mean that anyone who was following the
incorrectly-documented pattern will now encounter an error (and the
aforementioned warning hint) after upgrading to Terraform v0.14. This
seems like the safest compromise because Terraform can't automatically
infer the intent of files it finds in .terraform/plugins in order to
decide automatically how best to handle them.
The internals of the .terraform directory are always considered
implementation detail for a particular Terraform version and so switching
to a new directory for the _actual_ cache directory fits within our usual
set of guarantees, though it's definitely non-ideal in isolation but okay
when taken in the broader context of this problem, where the alternative
would be silent misbehavior when upgrading.
This changes the approach used by the provider installer to remember
between runs which selections it has previously made, using the lock file
format implemented in internal/depsfile.
This means that version constraints in the configuration are considered
only for providers we've not seen before or when -upgrade mode is active.
We no longer need to support 0.12-and-earlier-style provider addresses
because users should've upgraded their existing configurations and states
on Terraform 0.13 already.
For now this is only checked in the "init" command, because various test
shims are still relying on the idea of legacy providers the core layer.
However, rejecting these during init is sufficient grounds to avoid
supporting legacy provider addresses in the new dependency lock file
format, and thus sets the stage for a more severe removal of legacy
provider support in a later commit.
The tmp directory path is longer on Macs than other systems and was wrapping
across lines when printed, breaking the string match in the test.
Fix suggested by @apparentlymart is to add two spaces before the leading
'-' when printing to prevent the diagnostic renderer wrapping the line.
This new option is intended to address the previous inconsistencies where
some older subcommands supported partially changing the target directory
(where Terraform would use the new directory inconsistently) where newer
commands did not support that override at all.
Instead, now Terraform will accept a -chdir command at the start of the
command line (before the subcommand) and will interpret it as a request
to direct all actions that would normally be taken in the current working
directory into the target directory instead. This is similar to options
offered by some other similar tools, such as the -C option in "make".
The new option is only accepted at the start of the command line (before
the subcommand) as a way to reflect that it is a global command (not
specific to a particular subcommand) and that it takes effect _before_
executing the subcommand. This also means it'll be forced to appear before
any other command-specific arguments that take file paths, which hopefully
communicates that those other arguments are interpreted relative to the
overridden path.
As a measure of pragmatism for existing uses, the path.cwd object in
the Terraform language will continue to return the _original_ working
directory (ignoring -chdir), in case that is important in some exceptional
workflows. The path.root object gives the root module directory, which
will always match the overriden working directory unless the user
simultaneously uses one of the legacy directory override arguments, which
is not a pattern we intend to support in the long run.
As a first step down the deprecation path, this commit adjusts the
documentation to de-emphasize the inconsistent old command line arguments,
including specific guidance on what to use instead for the main three
workflow commands, but all of those options remain supported in the same
way as they were before. In a later commit we'll make those arguments
produce a visible deprecation warning in Terraform's output, and then
in an even later commit we'll remove them entirely so that -chdir is the
single supported way to run Terraform from a directory other than the
one containing the root module configuration.
* internal/getproviders: decode and return any registry warnings
The public registry may include a list of warnings in the "versions"
response for any given provider. This PR adds support for warnings from
the registry and an installer event to return those warnings to the
user.
This new command is intended to make it easy to create or update a mirror
directory containing suitable providers for the current configuration,
producing a layout that is appropriate both for a filesystem mirror or,
if copied into the document root of an HTTP server, a network mirror.
This initial version is not customizable aside from being able to select
multiple platforms to install packages for.
Future iterations of this could include commands to turn the JSON index
generation on and off, or to instruct it to produce the unpacked directory
layout instead of the packed directory layout as it currently does. Both
of those options would make the generated directory unsuitable to be
a network mirror, but it would still work as a filesystem mirror.
In the long run this will hopefully form part of a replacement workflow to
terraform-bundle as a way to put copies of providers somewhere so we don't
need to re-download them every time, but some other changes will be needed
outside of just this command before that'd be true, such as adding support
for network and/or filesystem mirrors in Terraform Enterprise.
Fetching a default namespace provider from the public registry can
result in 404 Not Found error. This might be caused by a previously-
default provider moving to a new namespace, which means that the
configuration needs to be upgraded to use an explicit provider source.
This commit adds a more detailed diagnostic for this situation,
suggesting that the intended provider might be in a new namespace. The
recommended course of action is to run the 0.13upgrade command to
generate the correct required_providers configuration.
This adds supports for "unmanaged" providers, or providers with process
lifecycles not controlled by Terraform. These providers are assumed to
be started before Terraform is launched, and are assumed to shut
themselves down after Terraform has finished running.
To do this, we must update the go-plugin dependency to v1.3.0, which
added support for the "test mode" plugin serving that powers all this.
As a side-effect of not needing to manage the process lifecycle anymore,
Terraform also no longer needs to worry about the provider's binary, as
it won't be used for anything anymore. Because of this, we can disable
the init behavior that concerns itself with downloading that provider's
binary, checking its version, and otherwise managing the binary.
This is all managed on a per-provider basis, so managed providers that
Terraform downloads, starts, and stops can be used in the same commands
as unmanaged providers. The TF_REATTACH_PROVIDERS environment variable
is added, and is a JSON encoding of the provider's address to the
information we need to connect to it.
This change enables two benefits: first, delve and other debuggers can
now be attached to provider server processes, and Terraform can connect.
This allows for attaching debuggers to provider processes, which before
was difficult to impossible. Second, it allows the SDK test framework to
host the provider in the same process as the test driver, while running
a production Terraform binary against the provider. This allows for Go's
built-in race detector and test coverage tooling to work as expected in
provider tests.
Unmanaged providers are expected to work in the exact same way as
managed providers, with one caveat: Terraform kills provider processes
and restarts them once per graph walk, meaning multiple times during
most Terraform CLI commands. As unmanaged providers can't be killed by
Terraform, and have no visibility into graph walks, unmanaged providers
are likely to have differences in how their global mutable state behaves
when compared to managed providers. Namely, unmanaged providers are
likely to retain global state when managed providers would have reset
it. Developers relying on global state should be aware of this.
This exercises the ability to customize the installation methods used by
the provider plugin installer, in this case forcing the use of a custom
local directory with a result essentially the same as what happens when
you pass -plugin-dir to "terraform init".
This more closely replicates the 0.12-and-earlier behavior, where having
at least one version of a provider installed locally would totally disable
any attempt to look for newer versions remotely.
This is just for the implicit default behavior. Assumption is that later
we'll have an explicit configuration mechanism that will allow the user
to specify exactly where to look for what, and thus avoid tricky
heuristics like this.
This restores some of the local search directories we used to include when
searching for provider plugins in Terraform 0.12 and earlier. The
directory structures we are expecting in these are different than before,
so existing directory contents will not be compatible without
restructuring, but we need to retain support for these local directories
so that users can continue to sideload third-party provider plugins until
the explicit, first-class provider mirrors configuration (in CLI config)
is implemented, at which point users will be able to override these to
whatever directories they want.
This also includes some new search directories that are specific to the
operating system where Terraform is running, following the documented
layout conventions of that platform. In particular, this follows the
XDG Base Directory specification on Unix systems, which has been a
somewhat-common request to better support "sideloading" of packages via
standard Linux distribution package managers and other similar mechanisms.
While it isn't strictly necessary to add that now, it seems ideal to do
all of the changes to our search directory layout at once so that our
documentation about this can cleanly distinguish "0.12 and earlier" vs.
"0.13 and later", rather than having to document a complex sequence of
smaller changes.
Because this behavior is a result of the integration of package main with
package command, this behavior is verified using an e2etest rather than
a unit test. That test, TestInitProvidersVendored, is also fixed here to
create a suitable directory structure for the platform where the test is
being run. This fixes TestInitProvidersVendored.
In the new design the ProviderSource is decided by package main, not by
the "command" package, and so making sure the vendor directory is included
is the responsibility of that package instead. Therefore we can no longer
test this at the "command" package level, but we'll retain a test for it
in e2etests to record that it isn't currently working, so that we have
a prompt to fix it before releasing.
Due to some incomplete rework of this function in an earlier commit, the
safety check for using the same directory as both the target and the
cache was inverted and was raising an error _unless_ they matched, rather
than _if_ they matched.
This change is verified by the e2etest TestInitProviders_pluginCache,
which is also updated to use the new-style cache directory layout as part
of this commit.
These tests make assertions against specific user-oriented output from the
"terraform init" command, but we've intentionally changed some of these
messages as part of introducing support for the decentralized provider
namespace.
The canonical location of the "template" provider is now in the hashicorp
namespace rather than the terraform-providers namespace, so the output
has changed to reflect that.
* internal/initwd: Allow deprecated relative module paths
In Terraform 0.11 we deprecated this form but didn't have any explicit
warning for it. Now we'll still accept it but generate a warning. In a
future major release we will drop this form altogether, since it is
ambiguous with registry module source addresses.
This codepath is covered by the command/e2etest suite.
* e2e: Skip copying .exists file, if present
We use this only in the "empty" test fixture in order to let git know that
the directory exists. We need to skip copying it so that we can test
"terraform init -from-module=...", which expects to find an empty
directory.
* command/e2etests: Re-enable and fix up the e2etest "acctests"
We disabled all of the tests that accessed remote services like the
Terraform Registry while they were being updated to support the new
protocols we now expect. With those services now in place, we can
re-enable these tests.
Some details of exactly what output we print, etc, have intentionally
changed since these tests were last updated.
* e2e: refactor for modern states and plans
* command/e2etest: re-enable e2etests and update for tf 0.12 compatibility
plugin/discovery: mkdirAll instead of mkdir when creating cache dir
