The short description of our commands (as shown in the main help output
from "terraform") was previously very inconsistent, using different
tense/mood for different commands. Some of the commands were also using
some terminology choices inconsistent with how we currently talk about
the related ideas in our documentation.
Here I've tried to add some consistency by first rewriting them all in
the imperative mood (except the ones that just are just subcommand
groupings), and tweaking some of the terminology to hopefully gel better
with how we present similar ideas in our recently-updated docs.
While working on this I inevitably spotted some similar inconsistencies
in the longer-form help output of some of the commands. I've not reviewed
all of these for consistency, but I did update some where the wording
was either left inconsstent with the short form changes I'd made or
where the prose stood out to me as particularly inconsistent with our
current usual documentation language style.
All of this is subjective, so I expect we'll continue to tweak these over
time as we continue to develop our documentation writing style based on
user questions and feedback.
Now that hclog can independently set levels on related loggers, we can
separate the log levels for different subsystems in terraform.
This adds the new environment variables, `TF_LOG_CORE` and
`TF_LOG_PROVIDER`, which each take the same set of log level arguments,
and only applies to logs from that subsystem. This means that setting
`TF_LOG_CORE=level` will not show logs from providers, and
`TF_LOG_PROVIDER=level` will not show logs from core. The behavior of
`TF_LOG` alone does not change.
While it is not necessarily needed since the default is to disable logs,
there is also a new level argument of `off`, which reflects the
associated level in hclog.
Use a separate log sink to always capture trace logs for the panicwrap
handler to write out in a crash log.
This requires creating a log file in the outer process and passing that
path to the child process to log to.
If you run the e2etests locally and use a configured plugin_cache_dir,
the test will leave a bad directory behind in your cache dir that causes
later `init`s to fail. To circumvent this, pass an explicity-empty CLI
config file.
This is a nicety for local developers and not necessarily required, but
it happens to me often enough that I'd like to fix it. It's probably not
a *bad* idea to pass an explicit cli config to all e2etests, honestly,
but this is the only one that causes active problems so I limited this
PR to that one test.
Here's the error which occurs on subsequent `init` if this test is run on a
machine that uses a plugin cache dir:
2020/10/13 10:41:05 [TRACE] providercache.fillMetaCache: error while scanning directory /Users/mildwonkey/.terraform.d/plugin-cache: failed to read metadata about /Users/mildwonkey/.terraform.d/plugin-cache/example.com/awesomecorp/happycloud/1.2.0/darwin_amd64: stat /Users/mildwonkey/.terraform.d/plugin-cache/example.com/awesomecorp/happycloud/1.2.0/darwin_amd64: no such file or directory
If a configuration requires a partial provider version (with some parts
unspecified), Terraform considers this as a constrained-to-zero version.
For example, a version constraint of 1.2 will result in an attempt to
install version 1.2.0, even if 1.2.1 is available.
When writing the dependency locks file, we previously would write 1.2.*,
as this is the in-memory representation of 1.2. This would then cause an
error on re-reading the locks file, as this is not a valid constraint
format.
Instead, we now explicitly convert the constraint to its zero-filled
representation before writing the locks file. This ensures that it
correctly round-trips.
Because this change is made in getproviders.VersionConstraintsString, it
also affects the output of the providers sub-command.
Use a single log writer instance for all std library logging.
Setup the std log writer in the logging package, and remove boilerplate
from test packages.
For normal provider installation we want to associate each provider with
a selected version number and find a suitable package for that version
that conforms to the official hashes for that release.
Those requirements are very onerous for a provider developer currently
testing a not-yet-released build, though. To allow for that case this new
CLI configuration feature allows overriding specific providers to refer
to give local filesystem directories.
Any provider overridden in this way is not subject to the usual
restrictions about selected versions or checksum conformance, and
activating an override won't cause any changes to the selections recorded
in the lock file because it's intended to be a temporary setting for one
developer only.
This is, in a sense, a spiritual successor of an old capability we had to
override specific plugins in the CLI configuration file. There were
some vestiges of that left in the main package and CLI config package
but nothing has actually been honoring them for several versions now and
so this commit removes them to avoid confusion with the new mechanism.
This originated in the cliconfig code to write out credentials files. The
Windows implementation of this in particular was quite onerous to get
right because it needs a very specific sequence of operations to avoid
running into exclusive file locks, and so by factoring this out with
only cosmetic modification we can avoid repeating all of that engineering
effort for other atomic file writing use-cases.
Terraform v0.10 introduced .terraform/plugins as a cache directory for
automatically-installed plugins, Terraform v0.13 later reorganized the
directory structure inside but retained its purpose as a cache.
The local cache used to also serve as a record of specifically which
packages were selected in a particular working directory, with the intent
that a second run of "terraform init" would always select the same
packages again. That meant that in some sense it behaved a bit like a
local filesystem mirror directory, even though that wasn't its intended
purpose.
Due to some unfortunate miscommunications, somewhere a long the line we
published some documentation that _recommended_ using the cache directory
as if it were a filesystem mirror directory when working with Terraform
Cloud. That was really only working as an accident of implementation
details, and Terraform v0.14 is now going to break that because the source
of record for the currently-selected provider versions is now the
public-facing dependency lock file rather than the contents of an existing
local cache directory on disk.
After some consideration of how to move forward here, this commit
implements a compromise that tries to avoid silently doing anything
surprising while still giving useful guidance to folks who were previously
using the unsupported strategy. Specifically:
- The local cache directory will now be .terraform/providers rather than
.terraform/plugins, because .terraform/plugins is effectively "poisoned"
by the incorrect usage that we can't reliably distinguish from prior
version correct usage.
- The .terraform/plugins directory is now the "legacy cache directory". It
is intentionally _not_ now a filesystem mirror directory, because that
would risk incorrectly interpreting providers automatically installed
by Terraform v0.13 as if they were a local mirror, and thus upgrades
and checksum fetches from the origin registry would be blocked.
- Because of the previous two points, someone who _was_ trying to use the
legacy cache directory as a filesystem mirror would see installation
fail for any providers they manually added to the legacy directory.
To avoid leaving that user stumped as to what went wrong, there's a
heuristic for the case where a non-official provider fails installation
and yet we can see it in the legacy cache directory. If that heuristic
matches then we'll produce a warning message hinting to move the
provider under the terraform.d/plugins directory, which is a _correct_
location for "bundled" provider plugins that belong only to a single
configuration (as opposed to being installed globally on a system).
This does unfortunately mean that anyone who was following the
incorrectly-documented pattern will now encounter an error (and the
aforementioned warning hint) after upgrading to Terraform v0.14. This
seems like the safest compromise because Terraform can't automatically
infer the intent of files it finds in .terraform/plugins in order to
decide automatically how best to handle them.
The internals of the .terraform directory are always considered
implementation detail for a particular Terraform version and so switching
to a new directory for the _actual_ cache directory fits within our usual
set of guarantees, though it's definitely non-ideal in isolation but okay
when taken in the broader context of this problem, where the alternative
would be silent misbehavior when upgrading.
When an attribute's sensitivity changes, but its value remains the same,
we consider this an update operation for the plan. This commit updates
the diff renderer to match this, detecting and displaying the change in
sensitivity.
Previously, the renderer would detect no changes to the value of the
attribute, and consider it a no-op action. This resulted in suppression
of the attribute when the plan is in concise mode.
This is achieved with a new helper function, ctyEqualValueAndMarks. We
call this function whenever we want to check that two values are equal
in order to determine whether the action is update or no-op.
Previously we were just letting hclwrite do its default formatting
behavior here. The current behavior there isn't ideal anyway -- it puts
big data structures all on one line -- but even ignoring that our goal
for this file format is to keep things in a highly-normalized shape so
that diffs against the file are clear and easy to read.
With that in mind, here we directly control how we write that value into
the file, which means that later changes to hclwrite's list/set
presentation won't affect it, regardless of what form they take.
This command is intended to help support situations where Terraform is
configured to use only local mirrors for provider installation and so the
normal "terraform init" flow would not have direct access to the official
package checksums published in the origin registry.
The intended workflow here is to use this command only when adding a new
provider or changing an existing provider's version in the configuration,
to augment the lock file with all of the checksums required to verify
the provider across a variety of different platforms. Once this command
has recorded all of the official checksums, future runs of
"terraform init" will verify that provider packages obtained from a local
mirror match with those upstream checksums.
This probably isn't the best UI we could do here, but it's a placeholder
for now just to avoid making it seem like we're ignoring the lock file
and checking for new versions anyway.
This changes the approach used by the provider installer to remember
between runs which selections it has previously made, using the lock file
format implemented in internal/depsfile.
This means that version constraints in the configuration are considered
only for providers we've not seen before or when -upgrade mode is active.
helper/copy CopyDir was used heavily in tests. It differes from
internal/copydir in a few ways, the main one being that it creates the
dst directory while the internal version expected the dst to exist
(there are other differences, which is why I did not just switch tests
to using internal's CopyDir).
I moved the CopyDir func from helper/copy into command_test.go; I could
also have moved it into internal/copy and named it something like
CreateDirAndCopy so if that seems like a better option please let me
know.
helper/copy/CopyFile was used in a couple of spots so I moved it into
internal, at which point I thought it made more sense to rename the
package copy (instead of copydir).
There's also a `go mod tidy` included.
* remove unused code
I've removed the provider-specific code under registry, and unused nil
backend, and replaced a call to helper from backend/oss (the other
callers of that func are provisioners scheduled to be deprecated).
I also removed the Dockerfile, as our build process uses a different
file.
Finally I removed the examples directory, which had outdated examples
and links. There are better, actively maintained examples available.
* command: remove various unused bits
* test wasn't running
* backend: remove unused err
If an entire block is marked sensitive (possibly because it is of type
NestedSet) and results in replacement of the resource, we should render
the standard "forces replacement" text after the opening line of the
block.
If a value rendered for the diff is sensitive and results in replacement
of the resource, we should render the standard "forces replacement" text
after the "(sensitive)" value display.
When a value in a nested block is marked as sensitive,
it will result in the behavior of every member of
that block being sensitive. As such, show a
specialized diff that reduces noise of (sensitive)
for many attributes that we won't show. Also update
the warning to differentiate between showing a warning
for an attribute or warning for blocks.
