This commit rectifies the fact that the original binary state is
referred to as V1 in the source code, but the first version of the JSON
state uses StateVersion: 1. We instead make the code refer to V0 as the
binary state, and V1 as the first version of JSON state.
This adds a field terraform_version to the state that represents the
Terraform version that wrote that state. If Terraform encounters a state
written by a future version, it will error. You must use at least the
version that wrote that state.
Internally we have fields to override this behavior (StateFutureAllowed),
but I chose not to expose them as CLI flags, since the user can just
modify the state directly. This is tricky, but should be tricky to
represent the horrible disaster that can happen by enabling it.
We didn't have to bump the state format version since the absense of the
field means it was written by version "0.0.0" which will always be
older. In effect though this change will always apply to version 2 of
the state since it appears in 0.7 which bumped the version for other
purposes.
I decided to split this up from the terraform state rm command to make the diff easier to see. These changes will also be used for terraform state mv.
This adds a `Remove` method to the `*terraform.State` struct. It takes a list of addresses and removes the items matching that list. This leverages the `StateFilter` committed last week to make the view of the world consistent across address lookups.
There is a lot of test duplication here with StateFilter, but in Terraform style: we like it that way.
This introduces the terraform state list command to list the resources
within a state. This is the first of many state management commands to
come into 0.7.
This is the first command of many to come that is considered a
"plumbing" command within Terraform (see "plumbing vs porcelain":
http://git.661346.n2.nabble.com/what-are-plumbing-and-porcelain-td2190639.html).
As such, this PR also introduces a bunch of groundwork to support
plumbing commands.
The main changes:
- Main command output is changed to split "common" and "uncommon"
commands.
- mitchellh/cli is updated to support nested subcommands, since
terraform state list is a nested subcommand.
- terraform.StateFilter is introduced as a way in core to filter/search
the state files. This is very basic currently but I expect to make it
more advanced as time goes on.
- terraform state list command is introduced to list resources in a
state. This can take a series of arguments to filter this down.
Known issues, or things that aren't done in this PR on purpose:
- Unit tests for terraform state list are on the way. Unit tests for the
core changes are all there.
Wow this one was tricky!
This bug presents itself only when using planfiles, because when doing a
straight `terraform apply` the interpolations are left in place from the
Plan graph walk and paper over the issue. (This detail is what made it
so hard to reproduce initially.)
Basically, graph nodes for module variables are visited during the apply
walk and attempt to interpolate. During a destroy walk, no attributes
are interpolated from resource nodes, so these interpolations fail.
This scenario is supposed to be handled by the `PruneNoopTransformer` -
in fact it's described as the example use case in the comment above it!
So the bug had to do with the actual behavor of the Noop transformer.
The resource nodes were not properly reporting themselves as Noops
during a destroy, so they were being left in the graph.
This in turn triggered the module variable nodes to see that they had
another node depending on them, so they also reported that they could
not be pruned.
Therefore we had two nodes in the graph that were effectively noops but
were being visited anyways. The module variable nodes were already graph
leaves, which is why this error presented itself as just stray messages
instead of actual failure to destroy.
Fixes#5440Fixes#5708Fixes#4988Fixes#3268
A consequnce of the work done in #6185 was that variables which were in
a module but not set explicitly (i.e. the default value was relied upon)
were marked as type errors. This was reported in #6230.
This commit adds a test case for this and a patch which fixes the issue.
The flattening process was not properly drawing dependencies between provider
nodes in modules and their parent provider nodes.
Fixes#2832Fixes#4443Fixes#4865
These tests demonstrates a problem where the types to a module input are
not checked. For example, if a module - inner - defines a variable
"should_be_a_map" as a map, or with a default variable of map, we do not
fail if the user sets the variable value in the outer module to a string
value. This is also a problem in nested modules.
The implementation changes add a type checking step into the graph
evaluation process to ensure invalid types are not passed.
The nodes it adds were immediately skipped by flattening and therefore
never had any effect. That makes the transformer effectively dead code
and removable. This was the only usage of FlattenSkip so we can remove
that as well.
The ContextGraphWalker struct includes a lock that's passed down to
BuiltinEvalContext and guards access to interpolation variables as
they're written using SetVariables.
The likely problem being expressed in #5733 is that the same map
reference is also passed down to the Interpolater.Variables field, which
is used for variable lookup.
Here, we plumb the same lock we're using to guard access for writes down
and acquire it before doing variable reads as well. It's not as fine
grained as perhaps it could be, but all the context tests pass and I
believe this should address #5733.
The ignore_changes diff filter was stripping out attributes on Create
but the diff was still making it down to the provider, so Create would
end up missing attributes, causing a full failure if any required
attributes were being ignored.
In addition, any changes that required a replacement of the resource
were causing problems with `ignore_chages`, which didn't properly filter
out the replacement when the triggering attributes were filtered out.
Refs #5627
When a user specifies `-target`s on a `terraform plan` and stores
the resulting diff in a plan file using `-out` - it usually works just
fine since the diff is scoped based on the targets.
When there are tainted resources in the state, however, graph nodes to
destroy them were popping back into the plan when it was being loaded
from a file. This was because Targets weren't being stored in the
Planfile, so Terraform didn't know to filter them out. (In the
non-Planfile scenario, we still had the Targets loaded directly from the
flags.)
By encoding Targets in with the Planfile we can ensure that the same
filters are always applied.
Backwards compatibility should be fine here, since we're just adding a
field. The gob encoder/decoder will just do the right thing (ignore/skip
the field) with planfiles stored w/ versions that don't know about
Targets.
Fixes#5183
Previously these details were relegated to the debug logs, which forces
the user to reproduce the error condition and then go digging for the
error message. Since we're asking users to report this error, let's give
them all the details they need right up front to make it a little easier
on them.
Context:
As part of building up a Plan, Terraform needs to detect "orphaned"
resources--resources which are present in the state but not in the
config. This happens when config for those resources is removed by the
user, making it Terraform's responsibility to destroy them.
Both state and config are organized by Module into a logical tree, so
the process of finding orphans involves checking for orphaned Resources
in the current module and for orphaned Modules, which themselves will
have all their Resources marked as orphans.
Bug:
In #3114 a problem was exposed where, given a module tree that looked
like this:
```
root
|
+-- parent (empty, except for sub-modules)
|
+-- child1 (1 resource)
|
+-- child2 (1 resource)
```
If `parent` was removed, a bunch of error messages would occur during
the plan. The root cause of this was duplicate orphans appearing for the
resources in child1 and child2.
Fix:
This turned out to be a bug in orphaned module detection. When looking
for deeply nested orphaned modules, root.parent was getting added twice
as an orphaned module to the graph.
Here, we add an additional check to prevent a double add, which
addresses this scenario properly.
Fixes#3114 (the Provisioner side of it was fixed in #4877)
Fixes an interpolation race that was occurring when a tainted destroy
node and a primary destroy node both tried to interpolate a computed
count in their config. Since they were sharing a pointer to the _same_
config, depending on how the race played out one of them could catch the
config uninterpolated and would then throw a syntax error.
The `Copy()` tree implemented for this fix can probably be used
elsewhere - basically we should copy the config whenever we drop nodes
into the graph - but for now I'm just applying it to the place that
fixes this bug.
Fixes#4982 - Includes a test covering that race condition.
