The AbstractResourceInstance type was storing the entire Resource from
the state, when it only needs the actual instance state. This would
cause resources to consume memory on the order of n^2, where n in the
number of instances of the resource.
Rather than attaching the entire resource state, which includes copying
each individual instance, only attach the ResourceInstance state, and
extract out the provider address from the Resource.
Resources that are not yet created will not be in the graph during
refresh, and therefore cannot be attached to the data source nodes. In
this case we still need to indicate if there are depends_on entries
inherited from the module call, which we can do with the forceDependsOn
field.
GraphNodeAttachDependsOn give us a method for adding all transitive resource
dependencies found through depends_on references, so that data source
can determine if they can be read during plan. This will be done by
inspecting the changes of all dependency resources, and delaying read
until apply if any changes are planned.
This encapsulates the logic for selecting an implied FQN for an
unqualified type name, which could either come from a local name used in
a module without specifying an explicit source for it or from the prefix
of a resource type on a resource that doesn't explicitly set "provider".
This replaces the previous behavior of just directly calling
NewDefaultProvider everywhere so that we can use a different implication
for the local name "terraform", to refer to the built-in terraform
provider rather than the stale one that's on registry.terraform.io for
compatibility with other Terraform versions.
Use the new addrs type here.
Also remove the uniqueMap from the config transformer. We enforce
uniqueness during config loading, and this is more likely to have false
positives due to stringification than anything.
* terraform: large refactor to use Provider from configs.Resource
configs.Resource.ImpliedProvider() now returns a string; it is the
callers' responsibility to turn that into an addrs.Provider if needed.
GraphNodeProviderConsumer ProvidedBy() no longer returns nil (reverting
to earlier, pre-provider-fqn behavior): it will return either the
provider set in config, provider set in state, or the default provider.
Make the interface name reflect the new return type of the method.
Remove the confusingly named and unused ResourceAddress method from the
resource nodes as well.
Remove the requirement for most *Resource types to be a
GraphNodeModuleInstance, ensuring that they never call ctx.Path while
being evaluated. This gets rid of most of the direct need for the Path
method currently implemented by NodeResourceAbstract, leaving the
provider and schema related calls for a subsequent PR.
This adds more shimming into that node itself, but allows us to pull it
out of the config transformer, and ensure we can create the resources
correctly from the config. The shimmed address usage can then be raised
out of the abstract resource, into the expanded node types.
GraphNodeModulePath is similar to GraphNodeSubPath, except that it
returns an addrs.Module rather than an addrs.ModuleInstance. This is
used by the ReferenceTransformer to connect references, when modules may
not yet be expanded.
Because references only exist within the scope of a module, we can
connect everything knowing only the module path. If the reference is to
an expanded module instance output, we can still properly order the
reference because we'll wait for the entire module to complete
evaluation.
* add Config to AttachSchemaTransformer for providerFqn lookup
* terraform: refactor ProvidedBy() to return nil when provider is not set
in config or state
* terraform: refactor ProvidedBy() to return an addrs.ProviderConfig
interface
This refactor allows terraform to indicate whether a specific provider
configuration was found for the resource or if it is instead returning
the assumed default.
With that additional information the provider transformer can check if
there is a specific (non-default) provider FQN.
Implement a new provider_meta block in the terraform block of modules, allowing provider-keyed metadata to be communicated from HCL to provider binaries.
Bundled in this change for minimal protocol version bumping is the addition of markdown support for attribute descriptions and the ability to indicate when an attribute is deprecated, so this information can be shown in the schema dump.
Co-authored-by: Paul Tyng <paul@paultyng.net>
* WIP: dynamic expand
* WIP: add variable and local support
* WIP: outputs
* WIP: Add referencer
* String representation, fixing tests it impacts
* Fixes TestContext2Apply_outputOrphanModule
* Fix TestContext2Apply_plannedDestroyInterpolatedCount
* Update DestroyOutputTransformer and associated types to reflect PlannableOutputs
* Remove comment about locals
* Remove module count enablement
* Removes allowing count for modules, and reverts the test,
while adding a Skip()'d test that works when you re-enable
the config
* update TargetDownstream signature to match master
* remove unnecessary method
Co-authored-by: James Bardin <j.bardin@gmail.com>
a large refactor to addrs.AbsProviderConfig, embedding the addrs.Provider instead of a Type string. I've added and updated tests, added some Legacy functions to support older state formats and shims, and added a normalization step when reading v4 (current) state files (not the added tests under states/statefile/roundtrip which work with both current and legacy-style AbsProviderConfig strings).
The remaining 'fixme' and 'todo' comments are mostly going to be addressed in a subsequent PR and involve looking up a given local provider config's FQN. This is fine for now as we are only working with default assumption.
* Introduce "Local" terminology for non-absolute provider config addresses
In a future change AbsProviderConfig and LocalProviderConfig are going to
become two entirely distinct types, rather than Abs embedding Local as
written here. This naming change is in preparation for that subsequent
work, which will also include introducing a new "ProviderConfig" type
that is an interface that AbsProviderConfig and LocalProviderConfig both
implement.
This is intended to be largely just a naming change to get started, so
we can deal with all of the messy renaming. However, this did also require
a slight change in modeling where the Resource.DefaultProviderConfig
method has become Resource.DefaultProvider returning a Provider address
directly, because this method doesn't have enough information to construct
a true and accurate LocalProviderConfig -- it would need to refer to the
configuration to know what this module is calling the provider it has
selected.
In order to leave a trail to follow for subsequent work, all of the
changes here are intended to ensure that remaining work will become
obvious via compile-time errors when all of the following changes happen:
- The concept of "legacy" provider addresses is removed from the addrs
package, including removing addrs.NewLegacyProvider and
addrs.Provider.LegacyString.
- addrs.AbsProviderConfig stops having addrs.LocalProviderConfig embedded
in it and has an addrs.Provider and a string alias directly instead.
- The provider-schema-handling parts of Terraform core are updated to
work with addrs.Provider to identify providers, rather than legacy
strings.
In particular, there are still several codepaths here making legacy
provider address assumptions (in order to limit the scope of this change)
but I've made sure each one is doing something that relies on at least
one of the above changes not having been made yet.
* addrs: ProviderConfig interface
In a (very) few special situations in the main "terraform" package we need
to make runtime decisions about whether a provider config is absolute
or local.
We currently do that by exploiting the fact that AbsProviderConfig has
LocalProviderConfig nested inside of it and so in the local case we can
just ignore the wrapping AbsProviderConfig and use the embedded value.
In a future change we'll be moving away from that embedding and making
these two types distinct in order to represent that mapping between them
requires consulting a lookup table in the configuration, and so here we
introduce a new interface type ProviderConfig that can represent either
AbsProviderConfig or LocalProviderConfig decided dynamically at runtime.
This also includes the Config.ResolveAbsProviderAddr method that will
eventually be responsible for that local-to-absolute translation, so
that callers with access to the configuration can normalize to an
addrs.AbsProviderConfig given a non-nil addrs.ProviderConfig. That's
currently unused because existing callers are still relying on the
simplistic structural transform, but we'll switch them over in a later
commit.
* rename LocalType to LocalName
Co-authored-by: Kristin Laemmert <mildwonkey@users.noreply.github.com>
References from a resource-level connection blocks were not returned
from NodeAbstractResource.References, causing the provisioner connection
attributes to sometimes be evaluated too early.
The DestroyEdgeTransformer cannot determine ordering from the graph when
the destroyers are from orphaned resources, because there are no
references to resolve. The new stored Dependencies provides what we need
to connect the instances in this case.
We also add the StateDependencies method directly in the
GraphNodeResourceInstance interface, since all instances already
implement this, and we don't need another optional interface to check.
The old code in DestroyEdgeTransformer may no longer be needed in the
long run, but that can be determined separately, since too many of the
tests start with an incomplete state and rely on the Dependencies being
determined from the configuration alone.
Make use of the new Dependencies field in the instance state.
The inter-instance dependencies will be determined from the complete
reference graph, so that absolute addresses can be stored, rather than
just references within a module. The Dependencies are added to the node
in the same manner as state, i.e. via an "attacher" interface and
transformer. This is because dependencies are calculated from the graph
itself, and not from the config.
* core: don't panic in NodeAbstractResourceInstance References()
It is possible for s.Current to be nil. This was hard to reproduce, so
the root cause is still unknown, but we can guard against the symptom.
* add log statement
Previously we were fetching these from the provider but then immediately
discarding the version numbers because the schema API had nowhere to put
them.
To avoid a late-breaking change to the internal structure of
terraform.ProviderSchema (which is constructed directly all over the
tests) we're retaining the resource type schemas in a new map alongside
the existing one with the same keys, rather than just switching to
using the providers.Schema struct directly there.
The methods that return resource type schemas now return two arguments,
intentionally creating a little API friction here so each new caller can
be reminded to think about whether they need to do something with the
schema version, though it can be ignored by many callers.
Since this was a breaking change to the Schemas API anyway, this also
fixes another API wart where there was a separate method for fetching
managed vs. data resource types and thus every caller ended up having a
switch statement on "mode". Now we just accept mode as an argument and
do the switch statement within the single SchemaForResourceType method.
Since StateReferences was implemented on NodeAbstractResource rather than
NodeAbstractResourceInstance it wasn't properly detecting references to
the same instance as self-references.
Now that we are using "seen" to filter out duplicates we can also simplify
how we handle these self-references by just pretending we saw them before
we even start the loop.
This change is confirmed by
TestContext2Apply_provisionerMultiSelfRefSingle
As previously mentioned in a comment here, versions of Terraform prior to
0.12 would store references to module outputs as just references to the
module as a whole in the state. It's not really clear why, but we wanted
to preserve this behavior for 0.12.
The previous implementation actually failed to do so, in spite of the
comment, so this commit fixes it to actually do what the comment
originally claimed.
In a later release we might remove this special case and just depend
directly on outputs where possible, since that'd allow us to produce a
more precise dependency graph for destroy actions, but when we do that
we'll first need to confirm that there isn't a good reason for the
original exception here.
The underlying References function includes duplicates and returns refs
in the order they appeared in source (approximately), but after we reduce
to just the raw addresses it's better to dedupe and return in a
predictable order.
We no longer use strings to represent addresses, so this method was a
leftover outlier from previous refactoring efforts.
At this time the result is not actually being used due to the state type
refactoring, which is a bug we'll address in a subsequent commit.
Due to how often the state and plan types are referenced throughout
Terraform, there isn't a great way to switch them out gradually. As a
consequence, this huge commit gets us from the old world to a _compilable_
new world, but still has a large number of known test failures due to
key functionality being stubbed out.
The stubs here are for anything that interacts with providers, since we
now need to do the follow-up work to similarly replace the old
terraform.ResourceProvider interface with its replacement in the new
"providers" package. That work, along with work to fix the remaining
failing tests, will follow in subsequent commits.
The aim here was to replace all references to terraform.State and its
downstream types with states.State, terraform.Plan with plans.Plan,
state.State with statemgr.State, and switch to the new implementations of
the state and plan file formats. However, due to the number of times those
types are used, this also ended up affecting numerous other parts of core
such as terraform.Hook, the backend.Backend interface, and most of the CLI
commands.
Just as with 5861dbf3fc49b19587a31816eb06f511ab861bb4 before, I apologize
in advance to the person who inevitably just found this huge commit while
spelunking through the commit history.
The "config" package is no longer used and will be removed as part
of the 0.12 release cleanup. Since configschema is part of the
"new world" of configuration modelling, it makes more sense for
it to live as a subdirectory of the newer "configs" package.
It was incorrect to use a type switch to detect the optional schema
attachment interfaces, because they are not mutually-exclusive: resource
nodes implement both GraphNodeAttachResourceSchema and
GraphNodeAttachProvisionerSchema.
This fixes a number of test regressions around dependency analysis in
"provisioner" blocks.
This requires making the "components" object available to the resource
node so it can be used during DynamicExpand. It also involved splitting
the provisioner schema attachment into a separate interface from
GraphNodeProvisionerConsumer so that it can now be handled within
AttachSchemaTransformer, along with all of the other schema attachment
steps.
Update test fixtures to work in our new world.
This is mostly changing out attribute names for those in the schema,
adding Providers to states, and updating the test-fixture
configurations.
Previously we were attempting to construct a default manually here, and
actually getting it wrong by using the resource type name as a whole
rather than the expected inferrence by prefix.
Now we use the method provided in the addrs package for this purpose,
which implements the standard behavior of shaving off the first
underscore-separated word from the resource type name.
Previously we had a bug where we'd use the resource type name instead of
the provider name. Now we use the DefaultProviderConfig helper function
to extract the provider name from the resource type name.
These are all things that ought to be present in normal use but can end up
being nil in incorrect tests. Test debugging is simpler if these things
return errors gracefully, rather than crashing.
This is a little awkward since we need to instantiate the providers much
earlier than before. To avoid a lot of reshuffling here we just spin each
one up and then immediately shut it down again, letting our existing init
functionality during the graph walk still do the main initialization.
Due to how deeply the configuration types go into Terraform Core, there
isn't a great way to switch out to HCL2 gradually. As a consequence, this
huge commit gets us from the old state to a _compilable_ new state, but
does not yet attempt to fix any tests and has a number of known missing
parts and bugs. We will continue to iterate on this in forthcoming
commits, heading back towards passing tests and making Terraform
fully-functional again.
The three main goals here are:
- Use the configuration models from the "configs" package instead of the
older models in the "config" package, which is now deprecated and
preserved only to help us write our migration tool.
- Do expression inspection and evaluation using the functionality of the
new "lang" package, instead of the Interpolator type and related
functionality in the main "terraform" package.
- Represent addresses of various objects using types in the addrs package,
rather than hand-constructed strings. This is not critical to support
the above, but was a big help during the implementation of these other
points since it made it much more explicit what kind of address is
expected in each context.
Since our new packages are built to accommodate some future planned
features that are not yet implemented (e.g. the "for_each" argument on
resources, "count"/"for_each" on modules), and since there's still a fair
amount of functionality still using old-style APIs, there is a moderate
amount of shimming here to connect new assumptions with old, hopefully in
a way that makes it easier to find and eliminate these shims later.
I apologize in advance to the person who inevitably just found this huge
commit while spelunking through the commit history.
This turned out to be a big messy commit, since the way providers are
referenced is tightly coupled throughout the code. That starts to unify
how providers are referenced, using the format output node Name method.
Add a new field to the internal resource data types called
ResolvedProvider. This is set by a new setter method SetProvider when a
resource is connected to a provider during graph creation. This allows
us to later lookup the provider instance a resource is connected to,
without requiring it to have the same module path.
The InitProvider context method now takes 2 arguments, one if the
provider type and the second is the full name of the provider. While the
provider type could still be parsed from the full name, this makes it
more explicit and, and changes to the name format won't effect this
code.
duplicate entries could end up in "depends_on" in the state, which could
possible lead to erroneous state comparisons. Remove them when walking
the graph, and remove existing duplicates when pruning the state.
