opentofu/terraform/node_output.go

package terraform

import (
	"fmt"
	"log"

	"github.com/hashicorp/hcl/v2"
	"github.com/hashicorp/terraform/addrs"
	"github.com/hashicorp/terraform/configs"
	"github.com/hashicorp/terraform/dag"
	"github.com/hashicorp/terraform/lang"
	"github.com/hashicorp/terraform/plans"
	"github.com/hashicorp/terraform/states"
	"github.com/hashicorp/terraform/tfdiags"
	"github.com/zclconf/go-cty/cty"
)

// nodeExpandOutput is the placeholder for a non-root module output that has
// not yet had its module path expanded.
type nodeExpandOutput struct {
	Addr    addrs.OutputValue
	Module  addrs.Module
	Config  *configs.Output
	Changes []*plans.OutputChangeSrc
	Destroy bool
}

var (
	_ GraphNodeReferenceable     = (*nodeExpandOutput)(nil)
	_ GraphNodeReferencer        = (*nodeExpandOutput)(nil)
	_ GraphNodeReferenceOutside  = (*nodeExpandOutput)(nil)
	_ GraphNodeDynamicExpandable = (*nodeExpandOutput)(nil)
	_ graphNodeTemporaryValue    = (*nodeExpandOutput)(nil)
	_ graphNodeExpandsInstances  = (*nodeExpandOutput)(nil)
)

func (n *nodeExpandOutput) expandsInstances() {}

func (n *nodeExpandOutput) temporaryValue() bool {
	// non root outputs are temporary
	return !n.Module.IsRoot()
}

func (n *nodeExpandOutput) DynamicExpand(ctx EvalContext) (*Graph, error) {
	if n.Destroy {
		// if we're planning a destroy, we only need to handle the root outputs.
		// The destroy plan doesn't evaluate any other config, so we can skip
		// the rest of the outputs.
		return n.planDestroyRootOutput(ctx)
	}

	expander := ctx.InstanceExpander()

	var g Graph
	for _, module := range expander.ExpandModule(n.Module) {
		absAddr := n.Addr.Absolute(module)

		// Find any recorded change for this output
		var change *plans.OutputChangeSrc
		for _, c := range n.Changes {
			if c.Addr.String() == absAddr.String() {
				change = c
				break
			}
		}

		o := &NodeApplyableOutput{
			Addr:   absAddr,
			Config: n.Config,
			Change: change,
		}
		log.Printf("[TRACE] Expanding output: adding %s as %T", o.Addr.String(), o)
		g.Add(o)
	}
	return &g, nil
}

// if we're planing a destroy operation, add a destroy node for any root output
func (n *nodeExpandOutput) planDestroyRootOutput(ctx EvalContext) (*Graph, error) {
	if !n.Module.IsRoot() {
		return nil, nil
	}
	state := ctx.State()
	if state == nil {
		return nil, nil
	}

	var g Graph
	o := &NodeDestroyableOutput{
		Addr:   n.Addr.Absolute(addrs.RootModuleInstance),
		Config: n.Config,
	}
	log.Printf("[TRACE] Expanding output: adding %s as %T", o.Addr.String(), o)
	g.Add(o)

	return &g, nil
}

func (n *nodeExpandOutput) Name() string {
	path := n.Module.String()
	addr := n.Addr.String() + " (expand)"
	if path != "" {
		return path + "." + addr
	}
	return addr
}

// GraphNodeModulePath
func (n *nodeExpandOutput) ModulePath() addrs.Module {
	return n.Module
}

// GraphNodeReferenceable
func (n *nodeExpandOutput) ReferenceableAddrs() []addrs.Referenceable {
	// An output in the root module can't be referenced at all.
	if n.Module.IsRoot() {
		return nil
	}

	// the output is referenced through the module call, and via the
	// module itself.
	_, call := n.Module.Call()
	callOutput := addrs.ModuleCallOutput{
		Call: call,
		Name: n.Addr.Name,
	}

	// Otherwise, we can reference the output via the
	// module call itself
	return []addrs.Referenceable{call, callOutput}
}

// GraphNodeReferenceOutside implementation
func (n *nodeExpandOutput) ReferenceOutside() (selfPath, referencePath addrs.Module) {
	// Output values have their expressions resolved in the context of the
	// module where they are defined.
	referencePath = n.Module

	// ...but they are referenced in the context of their calling module.
	selfPath = referencePath.Parent()

	return // uses named return values
}

// GraphNodeReferencer
func (n *nodeExpandOutput) References() []*addrs.Reference {
	// root outputs might be destroyable, and may not reference anything in
	// that case
	return referencesForOutput(n.Config)
}

// NodeApplyableOutput represents an output that is "applyable":
// it is ready to be applied.
type NodeApplyableOutput struct {
	Addr   addrs.AbsOutputValue
	Config *configs.Output // Config is the output in the config
	// If this is being evaluated during apply, we may have a change recorded already
	Change *plans.OutputChangeSrc
}

var (
	_ GraphNodeModuleInstance   = (*NodeApplyableOutput)(nil)
	_ GraphNodeReferenceable    = (*NodeApplyableOutput)(nil)
	_ GraphNodeReferencer       = (*NodeApplyableOutput)(nil)
	_ GraphNodeReferenceOutside = (*NodeApplyableOutput)(nil)
	_ GraphNodeExecutable       = (*NodeApplyableOutput)(nil)
	_ graphNodeTemporaryValue   = (*NodeApplyableOutput)(nil)
	_ dag.GraphNodeDotter       = (*NodeApplyableOutput)(nil)
)

func (n *NodeApplyableOutput) temporaryValue() bool {
	// this must always be evaluated if it is a root module output
	return !n.Addr.Module.IsRoot()
}

func (n *NodeApplyableOutput) Name() string {
	return n.Addr.String()
}

// GraphNodeModuleInstance
func (n *NodeApplyableOutput) Path() addrs.ModuleInstance {
	return n.Addr.Module
}

// GraphNodeModulePath
func (n *NodeApplyableOutput) ModulePath() addrs.Module {
	return n.Addr.Module.Module()
}

func referenceOutsideForOutput(addr addrs.AbsOutputValue) (selfPath, referencePath addrs.Module) {
	// Output values have their expressions resolved in the context of the
	// module where they are defined.
	referencePath = addr.Module.Module()

	// ...but they are referenced in the context of their calling module.
	selfPath = addr.Module.Parent().Module()

	return // uses named return values
}

// GraphNodeReferenceOutside implementation
func (n *NodeApplyableOutput) ReferenceOutside() (selfPath, referencePath addrs.Module) {
	return referenceOutsideForOutput(n.Addr)
}

func referenceableAddrsForOutput(addr addrs.AbsOutputValue) []addrs.Referenceable {
	// An output in the root module can't be referenced at all.
	if addr.Module.IsRoot() {
		return nil
	}

	// Otherwise, we can be referenced via a reference to our output name
	// on the parent module's call, or via a reference to the entire call.
	// e.g. module.foo.bar or just module.foo .
	// Note that our ReferenceOutside method causes these addresses to be
	// relative to the calling module, not the module where the output
	// was declared.
	_, outp := addr.ModuleCallOutput()
	_, call := addr.Module.CallInstance()

	return []addrs.Referenceable{outp, call}
}

// GraphNodeReferenceable
func (n *NodeApplyableOutput) ReferenceableAddrs() []addrs.Referenceable {
	return referenceableAddrsForOutput(n.Addr)
}

func referencesForOutput(c *configs.Output) []*addrs.Reference {
	impRefs, _ := lang.ReferencesInExpr(c.Expr)
	expRefs, _ := lang.References(c.DependsOn)
	l := len(impRefs) + len(expRefs)
	if l == 0 {
		return nil
	}
	refs := make([]*addrs.Reference, 0, l)
	refs = append(refs, impRefs...)
	refs = append(refs, expRefs...)
	return refs

}

// GraphNodeReferencer
func (n *NodeApplyableOutput) References() []*addrs.Reference {
	return referencesForOutput(n.Config)
}

// GraphNodeExecutable
func (n *NodeApplyableOutput) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics) {
	state := ctx.State()
	if state == nil {
		return
	}

	changes := ctx.Changes() // may be nil, if we're not working on a changeset

	val := cty.UnknownVal(cty.DynamicPseudoType)
	changeRecorded := n.Change != nil
	// we we have a change recorded, we don't need to re-evaluate if the value
	// was known
	if changeRecorded {
		var err error
		val, err = n.Change.After.Decode(cty.DynamicPseudoType)
		diags = diags.Append(err)
	}

	// If there was no change recorded, or the recorded change was not wholly
	// known, then we need to re-evaluate the output
	if !changeRecorded || !val.IsWhollyKnown() {
		// This has to run before we have a state lock, since evaluation also
		// reads the state
		val, diags = ctx.EvaluateExpr(n.Config.Expr, cty.DynamicPseudoType, nil)
		// We'll handle errors below, after we have loaded the module.
		// Outputs don't have a separate mode for validation, so validate
		// depends_on expressions here too
		diags = diags.Append(validateDependsOn(ctx, n.Config.DependsOn))

		// Ensure that non-sensitive outputs don't include sensitive values
		_, marks := val.UnmarkDeep()
		_, hasSensitive := marks["sensitive"]
		if !n.Config.Sensitive && hasSensitive {
			diags = diags.Append(&hcl.Diagnostic{
				Severity: hcl.DiagError,
				Summary:  "Output refers to sensitive values",
				Detail:   "Expressions used in outputs can only refer to sensitive values if the sensitive attribute is true.",
				Subject:  n.Config.DeclRange.Ptr(),
			})
		}
	}

	// handling the interpolation error
	if diags.HasErrors() {
		if flagWarnOutputErrors {
			log.Printf("[ERROR] Output interpolation %q failed: %s", n.Addr, diags.Err())
			// if we're continuing, make sure the output is included, and
			// marked as unknown. If the evaluator was able to find a type
			// for the value in spite of the error then we'll use it.
			n.setValue(state, changes, cty.UnknownVal(val.Type()))

			// Keep existing warnings, while converting errors to warnings.
			// This is not meant to be the normal path, so there no need to
			// make the errors pretty.
			var warnings tfdiags.Diagnostics
			for _, d := range diags {
				switch d.Severity() {
				case tfdiags.Warning:
					warnings = warnings.Append(d)
				case tfdiags.Error:
					desc := d.Description()
					warnings = warnings.Append(tfdiags.SimpleWarning(fmt.Sprintf("%s:%s", desc.Summary, desc.Detail)))
				}
			}

			return warnings
		}
		return diags
	}
	n.setValue(state, changes, val)

	// If we were able to evaluate a new value, we can update that in the
	// refreshed state as well.
	if state = ctx.RefreshState(); state != nil && val.IsWhollyKnown() {
		n.setValue(state, changes, val)
	}

	return diags
}

// dag.GraphNodeDotter impl.
func (n *NodeApplyableOutput) DotNode(name string, opts *dag.DotOpts) *dag.DotNode {
	return &dag.DotNode{
		Name: name,
		Attrs: map[string]string{
			"label": n.Name(),
			"shape": "note",
		},
	}
}

// NodeDestroyableOutput represents an output that is "destroyable":
// its application will remove the output from the state.
type NodeDestroyableOutput struct {
	Addr   addrs.AbsOutputValue
	Config *configs.Output // Config is the output in the config
}

var (
	_ GraphNodeExecutable = (*NodeDestroyableOutput)(nil)
	_ dag.GraphNodeDotter = (*NodeDestroyableOutput)(nil)
)

func (n *NodeDestroyableOutput) Name() string {
	return fmt.Sprintf("%s (destroy)", n.Addr.String())
}

// GraphNodeModulePath
func (n *NodeDestroyableOutput) ModulePath() addrs.Module {
	return n.Addr.Module.Module()
}

func (n *NodeDestroyableOutput) temporaryValue() bool {
	// this must always be evaluated if it is a root module output
	return !n.Addr.Module.IsRoot()
}

// GraphNodeExecutable
func (n *NodeDestroyableOutput) Execute(ctx EvalContext, op walkOperation) tfdiags.Diagnostics {
	state := ctx.State()
	if state == nil {
		return nil
	}

	// if this is a root module, try to get a before value from the state for
	// the diff
	sensitiveBefore := false
	before := cty.NullVal(cty.DynamicPseudoType)
	mod := state.Module(n.Addr.Module)
	if n.Addr.Module.IsRoot() && mod != nil {
		for name, o := range mod.OutputValues {
			if name == n.Addr.OutputValue.Name {
				sensitiveBefore = o.Sensitive
				before = o.Value
				break
			}
		}
	}

	changes := ctx.Changes()
	if changes != nil {
		change := &plans.OutputChange{
			Addr:      n.Addr,
			Sensitive: sensitiveBefore,
			Change: plans.Change{
				Action: plans.Delete,
				Before: before,
				After:  cty.NullVal(cty.DynamicPseudoType),
			},
		}

		cs, err := change.Encode()
		if err != nil {
			// Should never happen, since we just constructed this right above
			panic(fmt.Sprintf("planned change for %s could not be encoded: %s", n.Addr, err))
		}
		log.Printf("[TRACE] NodeDestroyableOutput: Saving %s change for %s in changeset", change.Action, n.Addr)
		changes.RemoveOutputChange(n.Addr) // remove any existing planned change, if present
		changes.AppendOutputChange(cs)     // add the new planned change
	}

	state.RemoveOutputValue(n.Addr)
	return nil
}

// dag.GraphNodeDotter impl.
func (n *NodeDestroyableOutput) DotNode(name string, opts *dag.DotOpts) *dag.DotNode {
	return &dag.DotNode{
		Name: name,
		Attrs: map[string]string{
			"label": n.Name(),
			"shape": "note",
		},
	}
}

func (n *NodeApplyableOutput) setValue(state *states.SyncState, changes *plans.ChangesSync, val cty.Value) {
	// If we have an active changeset then we'll first replicate the value in
	// there and lookup the prior value in the state. This is used in
	// preference to the state where present, since it *is* able to represent
	// unknowns, while the state cannot.
	if changes != nil {
		// if this is a root module, try to get a before value from the state for
		// the diff
		sensitiveBefore := false
		before := cty.NullVal(cty.DynamicPseudoType)
		mod := state.Module(n.Addr.Module)
		if n.Addr.Module.IsRoot() && mod != nil {
			for name, o := range mod.OutputValues {
				if name == n.Addr.OutputValue.Name {
					before = o.Value
					sensitiveBefore = o.Sensitive
					break
				}
			}
		}

		// We will not show the value is either the before or after are marked
		// as sensitivity. We can show the value again once sensitivity is
		// removed from both the config and the state.
		sensitiveChange := sensitiveBefore || n.Config.Sensitive

		// strip any marks here just to be sure we don't panic on the True comparison
		val, _ = val.UnmarkDeep()

		var action plans.Action
		switch {
		case val.IsNull():
			action = plans.Delete

		case before.IsNull():
			action = plans.Create

		case val.IsWhollyKnown() &&
			val.Equals(before).True() &&
			n.Config.Sensitive == sensitiveBefore:
			// Sensitivity must also match to be a NoOp.
			// Theoretically marks may not match here, but sensitivity is the
			// only one we can act on, and the state will have been loaded
			// without any marks to consider.
			action = plans.NoOp

		default:
			action = plans.Update
		}

		change := &plans.OutputChange{
			Addr:      n.Addr,
			Sensitive: sensitiveChange,
			Change: plans.Change{
				Action: action,
				Before: before,
				After:  val,
			},
		}

		cs, err := change.Encode()
		if err != nil {
			// Should never happen, since we just constructed this right above
			panic(fmt.Sprintf("planned change for %s could not be encoded: %s", n.Addr, err))
		}
		log.Printf("[TRACE] setValue: Saving %s change for %s in changeset", change.Action, n.Addr)
		changes.RemoveOutputChange(n.Addr) // remove any existing planned change, if present
		changes.AppendOutputChange(cs)     // add the new planned change
	}

	if val.IsKnown() && !val.IsNull() {
		// The state itself doesn't represent unknown values, so we null them
		// out here and then we'll save the real unknown value in the planned
		// changeset below, if we have one on this graph walk.
		log.Printf("[TRACE] setValue: Saving value for %s in state", n.Addr)
		unmarkedVal, _ := val.UnmarkDeep()
		stateVal := cty.UnknownAsNull(unmarkedVal)
		state.SetOutputValue(n.Addr, stateVal, n.Config.Sensitive)
	} else {
		log.Printf("[TRACE] setValue: Removing %s from state (it is now null)", n.Addr)
		state.RemoveOutputValue(n.Addr)
	}

}