opentofu/internal/addrs/module_source.go

package addrs

import (
	"fmt"
	"path"
	"regexp"
	"strings"

	svchost "github.com/hashicorp/terraform-svchost"
	"github.com/hashicorp/terraform/internal/getmodules"
)

// ModuleSource is the general type for all three of the possible module source
// address types. The concrete implementations of this are ModuleSourceLocal,
// ModuleSourceRegistry, and ModuleSourceRemote.
type ModuleSource interface {
	// String returns a full representation of the address, including any
	// additional components that are typically implied by omission in
	// user-written addresses.
	//
	// We typically use this longer representation in error message, in case
	// the inclusion of normally-omitted components is helpful in debugging
	// unexpected behavior.
	String() string

	// ForDisplay is similar to String but instead returns a representation of
	// the idiomatic way to write the address in configuration, omitting
	// components that are commonly just implied in addresses written by
	// users.
	//
	// We typically use this shorter representation in informational messages,
	// such as the note that we're about to start downloading a package.
	ForDisplay() string

	moduleSource()
}

var _ ModuleSource = ModuleSourceLocal("")
var _ ModuleSource = ModuleSourceRegistry{}
var _ ModuleSource = ModuleSourceRemote{}

var moduleSourceLocalPrefixes = []string{
	"./",
	"../",
	".\\",
	"..\\",
}

func ParseModuleSource(raw string) (ModuleSource, error) {
	for _, prefix := range moduleSourceLocalPrefixes {
		if strings.HasPrefix(raw, prefix) {
			localAddr, err := parseModuleSourceLocal(raw)
			if err != nil {
				// This is to make sure we really return a nil ModuleSource in
				// this case, rather than an interface containing the zero
				// value of ModuleSourceLocal.
				return nil, err
			}
			return localAddr, nil
		}
	}

	// For historical reasons, whether an address is a registry
	// address is defined only by whether it can be successfully
	// parsed as one, and anything else must fall through to be
	// parsed as a direct remote source, where go-getter might
	// then recognize it as a filesystem path. This is odd
	// but matches behavior we've had since Terraform v0.10 which
	// existing modules may be relying on.
	// (Notice that this means that there's never any path where
	// the registry source parse error gets returned to the caller,
	// which is annoying but has been true for many releases
	// without it posing a serious problem in practice.)
	if ret, err := parseModuleSourceRegistry(raw); err == nil {
		return ret, nil
	}

	// If we get down here then we treat everything else as a
	// remote address. In practice there's very little that
	// go-getter doesn't consider invalid input, so even invalid
	// nonsense will probably interpreted as _something_ here
	// and then fail during installation instead. We can't
	// really improve this situation for historical reasons.
	remoteAddr, err := parseModuleSourceRemote(raw)
	if err != nil {
		// This is to make sure we really return a nil ModuleSource in
		// this case, rather than an interface containing the zero
		// value of ModuleSourceRemote.
		return nil, err
	}
	return remoteAddr, nil
}

// ModuleSourceLocal is a ModuleSource representing a local path reference
// from the caller's directory to the callee's directory within the same
// module package.
//
// A "module package" here means a set of modules distributed together in
// the same archive, repository, or similar. That's a significant distinction
// because we always download and cache entire module packages at once,
// and then create relative references within the same directory in order
// to ensure all modules in the package are looking at a consistent filesystem
// layout. We also assume that modules within a package are maintained together,
// which means that cross-cutting maintenence across all of them would be
// possible.
//
// The actual value of a ModuleSourceLocal is a normalized relative path using
// forward slashes, even on operating systems that have other conventions,
// because we're representing traversal within the logical filesystem
// represented by the containing package, not actually within the physical
// filesystem we unpacked the package into. We should typically not construct
// ModuleSourceLocal values directly, except in tests where we can ensure
// the value meets our assumptions. Use ParseModuleSource instead if the
// input string is not hard-coded in the program.
type ModuleSourceLocal string

func parseModuleSourceLocal(raw string) (ModuleSourceLocal, error) {
	// As long as we have a suitable prefix (detected by ParseModuleSource)
	// there is no failure case for local paths: we just use the "path"
	// package's cleaning logic to remove any redundant "./" and "../"
	// sequences and any duplicate slashes and accept whatever that
	// produces.

	// Although using backslashes (Windows-style) is non-idiomatic, we do
	// allow it and just normalize it away, so the rest of Terraform will
	// only see the forward-slash form.
	if strings.Contains(raw, `\`) {
		// Note: We use string replacement rather than filepath.ToSlash
		// here because the filepath package behavior varies by current
		// platform, but we want to interpret configured paths the same
		// across all platforms: these are virtual paths within a module
		// package, not physical filesystem paths.
		raw = strings.ReplaceAll(raw, `\`, "/")
	}

	// Note that we could've historically blocked using "//" in a path here
	// in order to avoid confusion with the subdir syntax in remote addresses,
	// but we historically just treated that as the same as a single slash
	// and so we continue to do that now for compatibility. Clean strips those
	// out and reduces them to just a single slash.
	clean := path.Clean(raw)

	// However, we do need to keep a single "./" on the front if it isn't
	// a "../" path, or else it would be ambigous with the registry address
	// syntax.
	if !strings.HasPrefix(clean, "../") {
		clean = "./" + clean
	}

	return ModuleSourceLocal(clean), nil
}

func (s ModuleSourceLocal) moduleSource() {}

func (s ModuleSourceLocal) String() string {
	// We assume that our underlying string was already normalized at
	// construction, so we just return it verbatim.
	return string(s)
}

func (s ModuleSourceLocal) ForDisplay() string {
	return string(s)
}

// ModuleSourceRegistry is a ModuleSource representing a module listed in a
// Terraform module registry.
//
// A registry source isn't a direct source location but rather an indirection
// over a ModuleSourceRemote. The job of a registry is to translate the
// combination of a ModuleSourceRegistry and a module version number into
// a concrete ModuleSourceRemote that Terraform will then download and
// install.
type ModuleSourceRegistry struct {
	// PackageAddr is the registry package that the target module belongs to.
	// The module installer must translate this into a ModuleSourceRemote
	// using the registry API and then take that underlying address's
	// PackageAddr in order to find the actual package location.
	PackageAddr ModuleRegistryPackage

	// If Subdir is non-empty then it represents a sub-directory within the
	// remote package that the registry address eventually resolves to.
	// This will ultimately become the suffix of the Subdir of the
	// ModuleSourceRemote that the registry address translates to.
	//
	// Subdir uses a normalized forward-slash-based path syntax within the
	// virtual filesystem represented by the final package. It will never
	// include `../` or `./` sequences.
	Subdir string
}

// DefaultModuleRegistryHost is the hostname used for registry-based module
// source addresses that do not have an explicit hostname.
const DefaultModuleRegistryHost = svchost.Hostname("registry.terraform.io")

var moduleRegistryNamePattern = regexp.MustCompile("^[0-9A-Za-z](?:[0-9A-Za-z-_]{0,62}[0-9A-Za-z])?$")
var moduleRegistryTargetSystemPattern = regexp.MustCompile("^[0-9a-z]{1,64}$")

func parseModuleSourceRegistry(raw string) (ModuleSourceRegistry, error) {
	var err error

	var subDir string
	raw, subDir = getmodules.SplitPackageSubdir(raw)
	if strings.HasPrefix(subDir, "../") {
		return ModuleSourceRegistry{}, fmt.Errorf("subdirectory path %q leads outside of the module package", subDir)
	}

	parts := strings.Split(raw, "/")
	// A valid registry address has either three or four parts, because the
	// leading hostname part is optional.
	if len(parts) != 3 && len(parts) != 4 {
		return ModuleSourceRegistry{}, fmt.Errorf("a module registry source address must have either three or four slash-separated components")
	}

	host := DefaultModuleRegistryHost
	if len(parts) == 4 {
		host, err = svchost.ForComparison(parts[0])
		if err != nil {
			// The svchost library doesn't produce very good error messages to
			// return to an end-user, so we'll use some custom ones here.
			switch {
			case strings.Contains(parts[0], "--"):
				// Looks like possibly punycode, which we don't allow here
				// to ensure that source addresses are written readably.
				return ModuleSourceRegistry{}, fmt.Errorf("invalid module registry hostname %q; internationalized domain names must be given as direct unicode characters, not in punycode", parts[0])
			default:
				return ModuleSourceRegistry{}, fmt.Errorf("invalid module registry hostname %q", parts[0])
			}
		}
		if !strings.Contains(host.String(), ".") {
			return ModuleSourceRegistry{}, fmt.Errorf("invalid module registry hostname: must contain at least one dot")
		}
		// Discard the hostname prefix now that we've processed it
		parts = parts[1:]
	}

	ret := ModuleSourceRegistry{
		PackageAddr: ModuleRegistryPackage{
			Host: host,
		},

		Subdir: subDir,
	}

	if host == svchost.Hostname("github.com") || host == svchost.Hostname("bitbucket.org") {
		return ret, fmt.Errorf("can't use %q as a module registry host, because it's reserved for installing directly from version control repositories", host)
	}

	if ret.PackageAddr.Namespace, err = parseModuleRegistryName(parts[0]); err != nil {
		if strings.Contains(parts[0], ".") {
			// Seems like the user omitted one of the latter components in
			// an address with an explicit hostname.
			return ret, fmt.Errorf("source address must have three more components after the hostname: the namespace, the name, and the target system")
		}
		return ret, fmt.Errorf("invalid namespace %q: %s", parts[0], err)
	}
	if ret.PackageAddr.Name, err = parseModuleRegistryName(parts[1]); err != nil {
		return ret, fmt.Errorf("invalid module name %q: %s", parts[1], err)
	}
	if ret.PackageAddr.TargetSystem, err = parseModuleRegistryTargetSystem(parts[2]); err != nil {
		if strings.Contains(parts[2], "?") {
			// The user was trying to include a query string, probably?
			return ret, fmt.Errorf("module registry addresses may not include a query string portion")
		}
		return ret, fmt.Errorf("invalid target system %q: %s", parts[2], err)
	}

	return ret, nil
}

// parseModuleRegistryName validates and normalizes a string in either the
// "namespace" or "name" position of a module registry source address.
func parseModuleRegistryName(given string) (string, error) {
	// Similar to the names in provider source addresses, we defined these
	// to be compatible with what filesystems and typical remote systems
	// like GitHub allow in names. Unfortunately we didn't end up defining
	// these exactly equivalently: provider names can only use dashes as
	// punctuation, whereas module names can use underscores. So here we're
	// using some regular expressions from the original module source
	// implementation, rather than using the IDNA rules as we do in
	// ParseProviderPart.

	if !moduleRegistryNamePattern.MatchString(given) {
		return "", fmt.Errorf("must be between one and 64 characters, including ASCII letters, digits, dashes, and underscores, where dashes and underscores may not be the prefix or suffix")
	}

	// We also skip normalizing the name to lowercase, because we historically
	// didn't do that and so existing module registries might be doing
	// case-sensitive matching.
	return given, nil
}

// parseModuleRegistryTargetSystem validates and normalizes a string in the
// "target system" position of a module registry source address. This is
// what we historically called "provider" but never actually enforced as
// being a provider address, and now _cannot_ be a provider address because
// provider addresses have three slash-separated components of their own.
func parseModuleRegistryTargetSystem(given string) (string, error) {
	// Similar to the names in provider source addresses, we defined these
	// to be compatible with what filesystems and typical remote systems
	// like GitHub allow in names. Unfortunately we didn't end up defining
	// these exactly equivalently: provider names can only use dashes as
	// punctuation, whereas module names can use underscores. So here we're
	// using some regular expressions from the original module source
	// implementation, rather than using the IDNA rules as we do in
	// ParseProviderPart.

	if !moduleRegistryTargetSystemPattern.MatchString(given) {
		return "", fmt.Errorf("must be between one and 64 ASCII letters or digits")
	}

	// We also skip normalizing the name to lowercase, because we historically
	// didn't do that and so existing module registries might be doing
	// case-sensitive matching.
	return given, nil
}

func (s ModuleSourceRegistry) moduleSource() {}

func (s ModuleSourceRegistry) String() string {
	if s.Subdir != "" {
		return s.PackageAddr.String() + "//" + s.Subdir
	}
	return s.PackageAddr.String()
}

func (s ModuleSourceRegistry) ForDisplay() string {
	if s.Subdir != "" {
		return s.PackageAddr.ForDisplay() + "//" + s.Subdir
	}
	return s.PackageAddr.ForDisplay()
}

// ModuleSourceRemote is a ModuleSource representing a remote location from
// which we can retrieve a module package.
//
// A ModuleSourceRemote can optionally include a "subdirectory" path, which
// means that it's selecting a sub-directory of the given package to use as
// the entry point into the package.
type ModuleSourceRemote struct {
	// PackageAddr is the address of the remote package that the requested
	// module belongs to.
	PackageAddr ModulePackage

	// If Subdir is non-empty then it represents a sub-directory within the
	// remote package which will serve as the entry-point for the package.
	//
	// Subdir uses a normalized forward-slash-based path syntax within the
	// virtual filesystem represented by the final package. It will never
	// include `../` or `./` sequences.
	Subdir string
}

func parseModuleSourceRemote(raw string) (ModuleSourceRemote, error) {
	var subDir string
	raw, subDir = getmodules.SplitPackageSubdir(raw)
	if strings.HasPrefix(subDir, "../") {
		return ModuleSourceRemote{}, fmt.Errorf("subdirectory path %q leads outside of the module package", subDir)
	}

	// A remote source address is really just a go-getter address resulting
	// from go-getter's "detect" phase, which adds on the prefix specifying
	// which protocol it should use and possibly also adjusts the
	// protocol-specific part into different syntax.
	//
	// Note that for historical reasons this can potentially do network
	// requests in order to disambiguate certain address types, although
	// that's a legacy thing that is only for some specific, less-commonly-used
	// address types. Most just do local string manipulation. We should
	// aim to remove the network requests over time, if possible.
	norm, moreSubDir, err := getmodules.NormalizePackageAddress(raw)
	if err != nil {
		// We must pass through the returned error directly here because
		// the getmodules package has some special error types it uses
		// for certain cases where the UI layer might want to include a
		// more helpful error message.
		return ModuleSourceRemote{}, err
	}

	if moreSubDir != "" {
		switch {
		case subDir != "":
			// The detector's own subdir goes first, because the
			// subdir we were given is conceptually relative to
			// the subdirectory that we just detected.
			subDir = path.Join(moreSubDir, subDir)
		default:
			subDir = path.Clean(moreSubDir)
		}
		if strings.HasPrefix(subDir, "../") {
			// This would suggest a bug in a go-getter detector, but
			// we'll catch it anyway to avoid doing something confusing
			// downstream.
			return ModuleSourceRemote{}, fmt.Errorf("detected subdirectory path %q of %q leads outside of the module package", subDir, norm)
		}
	}

	return ModuleSourceRemote{
		PackageAddr: ModulePackage(norm),
		Subdir:      subDir,
	}, nil
}

func (s ModuleSourceRemote) moduleSource() {}

func (s ModuleSourceRemote) String() string {
	if s.Subdir != "" {
		return s.PackageAddr.String() + "//" + s.Subdir
	}
	return s.PackageAddr.String()
}

func (s ModuleSourceRemote) ForDisplay() string {
	// The two string representations are identical for this address type.
	// This isn't really entirely true to the idea of "ForDisplay" since
	// it'll often include some additional components added in by the
	// go-getter detectors, but we don't have any function to turn a
	// "detected" string back into an idiomatic shorthand the user might've
	// entered.
	return s.String()
}

// FromRegistry can be called on a remote source address that was returned
// from a module registry, passing in the original registry source address
// that the registry was asked about, in order to get the effective final
// remote source address.
//
// Specifically, this method handles the situations where one or both of
// the two addresses contain subdirectory paths, combining both when necessary
// in order to ensure that both the registry's given path and the user's
// given path are both respected.
//
// This will return nonsense if given a registry address other than the one
// that generated the reciever via a registry lookup.
func (s ModuleSourceRemote) FromRegistry(given ModuleSourceRegistry) ModuleSourceRemote {
	ret := s // not a pointer, so this is a shallow copy

	switch {
	case s.Subdir != "" && given.Subdir != "":
		ret.Subdir = path.Join(s.Subdir, given.Subdir)
	case given.Subdir != "":
		ret.Subdir = given.Subdir
	}

	return ret
}