memtest86plus/system/smbus.h

133 lines
3.2 KiB
C
Raw Normal View History

#ifndef _SMBUS_H_
#define _SMBUS_H_
/**
* SPDX-License-Identifier: GPL-2.0
*
* \file
*
* Provides functions for reading SPD via SMBUS
*
* Copyright (C) 2004-2022 Samuel Demeulemeester.
*/
#define I2C_WRITE 0
#define I2C_READ 1
#define SPD5_MR11 11
/* i801 Hosts Addresses */
#define SMBHSTSTS smbusbase
#define SMBHSTCNT smbusbase + 2
#define SMBHSTCMD smbusbase + 3
#define SMBHSTADD smbusbase + 4
#define SMBHSTDAT0 smbusbase + 5
#define SMBHSTDAT1 smbusbase + 6
#define SMBBLKDAT smbusbase + 7
#define SMBPEC smbusbase + 8
#define SMBAUXSTS smbusbase + 12
#define SMBAUXCTL smbusbase + 13
/* i801 Hosts Status register bits */
#define SMBHSTSTS_BYTE_DONE 0x80
#define SMBHSTSTS_INUSE_STS 0x40
#define SMBHSTSTS_SMBALERT_STS 0x20
#define SMBHSTSTS_FAILED 0x10
#define SMBHSTSTS_BUS_ERR 0x08
#define SMBHSTSTS_DEV_ERR 0x04
#define SMBHSTSTS_INTR 0x02
#define SMBHSTSTS_HOST_BUSY 0x01
#define SMBHSTCNT_QUICK 0x00
#define SMBHSTCNT_BYTE 0x04
#define SMBHSTCNT_BYTE_DATA 0x08
#define SMBHSTCNT_WORD_DATA 0x0C
#define SMBHSTCNT_BLOCK_DATA 0x14
#define SMBHSTCNT_I2C_BLOCK_DATA 0x18
#define SMBHSTCNT_LAST_BYTE 0x20
#define SMBHSTCNT_START 0x40
2022-03-27 16:47:57 -05:00
/* AMD-Specific constants */
#define AMD_INDEX_IO_PORT 0xCD6
#define AMD_DATA_IO_PORT 0xCD7
#define AMD_SMBUS_BASE_REG 0x2C
2022-03-27 16:47:57 -05:00
#define AMD_PM_INDEX 0x00
/* nVidia-Specific constants */
#define NV_SMBUS_ADR_REG 0x20
#define NV_OLD_SMBUS_ADR_REG 0x50
#define NVSMBCNT smbusbase + 0
#define NVSMBSTS smbusbase + 1
#define NVSMBADD smbusbase + 2
#define NVSMBCMD smbusbase + 3
#define NVSMBDAT(x) (smbusbase + 4 + (x))
#define NVSMBCNT_WRITE 0x00
#define NVSMBCNT_READ 0x01
#define NVSMBCNT_QUICK 0x02
#define NVSMBCNT_BYTE 0x04
#define NVSMBCNT_BYTE_DATA 0x06
#define NVSMBCNT_WORD_DATA 0x08
#define NVSMBSTS_DONE 0x80
#define NVSMBSTS_ALRM 0x40
#define NVSMBSTS_RES 0x20
#define NVSMBSTS_STATUS 0x1f
/** Rounding factors for timing computation
*
* These factors are used as a configurable CEIL() function
* to get the upper int from a float past a specific decimal point.
*/
#define DDR5_ROUNDING_FACTOR 30
#define ROUNDING_FACTOR 0.9f
#define SPD_SKU_LEN 32
struct pci_smbus_controller {
unsigned vendor;
unsigned device;
void (*get_adr)(void);
};
typedef struct spd_infos {
bool isValid;
uint8_t slot_num;
uint16_t jedec_code;
uint32_t module_size;
char *type;
char sku[SPD_SKU_LEN + 1];
uint8_t XMP;
uint16_t freq;
bool hasECC;
uint8_t fab_year;
uint8_t fab_week;
uint16_t tCL;
uint8_t tCL_dec;
uint16_t tRCD;
uint16_t tRP;
uint16_t tRAS;
uint16_t tRC;
} spd_info;
typedef struct ram_infos {
uint16_t freq;
uint16_t tCL;
uint8_t tCL_dec;
uint16_t tRCD;
uint16_t tRP;
uint16_t tRAS;
char *type;
} ram_info;
extern ram_info ram;
/**
* Print SMBUS Info
*/
void print_smbus_startup_info(void);
#endif // SMBUS_H