* lib/assert: Add LoongArch assert support
Added LoongArch break 3 assert instruction.
Signed-off-by: Chao Li <lichao@loongson.cn>
* lib/barrier: Add barrier method for LoongArch
Added LoongArch barriers in barrier_spin_wait and barrier_halt_wait
functions.
Signed-off-by: Chao Li <lichao@loognson.cn>
* lib/spinlock: Add LoongArch CPU pause
Because the LoongArch haven't pause instruction, using eight nops to
replace the pause.
Signed-off-by: Chao Li <lichao@loongson.cn>
* lib/string: Make LoongArch use the string function in the file
Since LoongArch GCC doesn't have built-in string functions, use the
string function instance in the sting.c
Signed-off-by: Chao Li <lichao@loongson.cn>
* lib/unistd: Add LoongArch CPU pause
Because the LoongArch haven't pause instruction, using eight nops to
replace the pause.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/acpi: Reduce the way of search RSDP for non-x86 ARCHs
Searching RSDP from legacy BIOS EDBA and reserved areas is available
only on i386 and x64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/cache: Add LoongArch64 cache operations support
Added cache operations support for LoongArch64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/cpuid: Add the compile limit
Make the `cpuid` function action only on i386/x64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/heap: Add heap support for LoongArch64
LoongArch64 uses the low 256MB as the low memory.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/memrw: Add 8-bit and 16-bit memory operations
Added 8-bit and 16-bit memory access operations, which 8-bit uses
`movb` and 16-bit is `movw`.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/memrw: Add LoongArch memory access operations
Added 8/16/32/64-bit memory access operations for LoongArch64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system: Add Loongson PCI vendor ID and Loongson 7A chipset EHCI workaround
1. Added Loongson PCI vendor ID.
2. Added Loongson 7A chipset ECHI workaround.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/io: Add LoongArch64 IO port operations
Added IO port operations for LoongArch64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/reloc64: Add LoongArch64 relocations support
Added R_LARCH_RELATIVE and R_LARCH_NONE relocations support for
LoongArch64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/serial: Add Loongson CPU serial port support
Add the serial port address perfix of Loongson CPU and obtain serial
port clock method.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/smbus: Rename smbus.c to i2c_x86.c
Renamed the smbus.c to i2c_x86.c in i386 and x64 platforms.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/smp: Add LoongArch SMP support
Added LoongArch multi-core support and a way of map to node numbers if
the NUMA is enabled.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/timers: Add LoongArch supports
In LoongArch, there is a stable counter that is independent of other
clocks, it like the TSC in x64. Using it to count the ticks per
millisecond.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/tsc: Add LoongArch support
Usually the frequency of stable counter is not same to CPU frequency, so
using the performance counter for the delay operations.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/usbhcd: Add LoongArch MMIO perfix
Added LoongArch64 MMIO address perfix, use for address the PCI memory
space.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/usbhcd: Add Loongson 7A2000 chipset OHCI BAR offset fix
If the BAR address is not fixed for the Loongson 7A2000 OHCI controller,
some prots will not be usable, This change currently only affects the
LoongArch platform.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system: Add the way to IO access via MMIO
Usually, it is access the IO like PCI IO via MMIO on non-X86 ARCHs, so
a method to access IO via MMIO is added.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system: Add the way to access PCI memory space via MMIO
Some uniformly address ARCHs access the PCI memory depended the MMIO, so
the method to access PCI memory via MMIO is added.
Signed-off-by: Chao Li <lichao@loongson.cn>
* app: Add LoongArch version support
Reduced the version field by two characters to support ARCH name
abbreviations with more than three characters, and added "la64" ARCH
version display.
Singed-off-by: Chao Li <lichao@loongson.cn>
* test/block_move: Add block move test via ASM for LoongArch
Add block move test inline assembly instance for LoongArch.
Signed-off-by: Chao Li <lichao@loongson.cn>
* test/mov_inv_fixed: Add LoongArch ASM version word write operation
Add LoongArch ASM version word write cycle if it uses the HAND_OPTIMISED.
Signed-off-by: Chao Li <lichao@loongson.cn>
* boot: Adjust the AP stack size for LoongArch
LoongArch exception will store all of the GP, FP and CSR on stack, it
need more stack size, make LoongArch AP using 2KB stack size.
Signed-off-by: Chao Li <lichao@loongson.cn>
* boot/efisetup: Add LoongArch CPU halt instruction
Add "idle 0" for LoongArch
Signed-off-by: Chao Li <lichao@loongson.cn>
* boot/efi: Limiting the ms_abi using scope
Make the ms_abi only work on i386 and x64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/imc/loongson: Add Loongson LoongArch IMC support
Added the Loongson LoongArch CPU IMC instance, support read out the IMC
sequence, currently only supports reading MC0.
Signed-off-by: Chao Li <lichao@loongson.cn>
* app/loongarch: Add intrrupt handler for LoongArch
Added the LoongArch IRQ handler support.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/loongarch: Add LoongArch ARCH specific files
Added LoongArch ARCH specific files: cpuid.c, cpuinfo.c, hwctrl.c,
memctrl.c, temperature.c, vmem.c, registers.h
They use the same pubilc API for i386 and x64 platforms.
Signed-off-by: Chao Li <lichao@loongson.cn>
* boot: Add LoongArch startup and header
Added the header.S and startup64.S for LoongArch, CPU works on:
1. Page mode.
2. Load and store is cacheable.
3. Instructions is cacheable.
4. DMWn 0 and 1 is used.
5. To access non-cacheable areas, use the perfix 0x8000000000000000.
Signed-off Chao Li <lichao@loongson.cn>
* build64/la64: Add LoongArch64 build files
Add infrastructure files to build memtest86 plus for LoongArch64
platform.
Signed-off-by: Chao Li <lichao@loongson.cn>
* workflows: Add LoongArch64 CI supports
Adjust workflow logci, remvoe 32 and 64 wordsize, replace with "i386,
x86_64 and la64", add LoongArch64 build CI check.
Signed-off-by: Chao Li <lichao@loongson.cn>
---------
Signed-off-by: Chao Li <lichao@loongson.cn>
Signed-off-by: Chao Li <lichao@loognson.cn>
Added a new CC flag into build32 and build64 Makefiles to distinguish
whether compiling to 32-bit or 64-bit code.
[Lionel Debroux: rebased on the memrw functions refactor.]
Signed-off-by: Chao Li <lichao@loongson.cn>
* Optimize the JEP106 list by using __attribute__((packed)) to remove padding. The x86 & x86_64 series support unaligned accesses just fine, after all, and this is not remotely a hot path.
* Optimize several string-related constructs by switching to fixed-length char arrays, which avoids pointers + relocations.
* app/interrupt.c: array of different-length strings, but most of those are lengthy enough for this to be a clear win, especially on x86_64;
* system/usbhcd.c: array of same-length strings;
* tests/tests.h: array of structs containing same-length strings.
* Reduce the size of the list of tests by using a narrower type for the cpu mode, which reduces padding.
When two controllers are attached to a physical port (e.g. in the
case of EHCI and its companion controllers, problems can occur if
the BIOS still has control of one controller when we try to use the
other one. So perform a first pass to scan the PCI bus and take
ownership of and reset all the controllers we find, and perform a
second pass to initialise the controllers and probe for attached
devices.
As we don't support hot plugging, split the second pass into two,
with the first probing the EHCI controllers and handing over any
low and full speed devices to the companion controllers, and the
second probing the remaining controller types.
* Add new heap manager.
* Convert OHCI driver to use new heap manager.
* Convert UHCI driver to use new heap manager.
* Convert EHCI driver to use new heap manager.
* Convert XHCI driver to use new heap manager.
* Convert SMP to use new heap manager.
* Add a "usbinit" boot option to handle various buggy USB devices.
This replaces the "keyboard=buggy-usb" option, and adds a second
workaround to handle the problem seen in issue #107.
A USB keyboard may return key codes in any of the 6 key code array
positions (issue #48). So we have to compare the latest report to
the previous one to detect new key presses and handle rollover. As
the same change is needed for all HCI types, factor out the common
code into the base driver.
If the usbdebug option is present, pause at the end of the USB scan until
a key is pressed. Otherwise, if the keyboard=usb option is present and no
USB keyboards were discovered, pause for 10 seconds. Otherwise don't pause.
We expect UHCI controllers to be mapped into I/O space and the other
controller types to be mapped into Memory space. Print a diagnostic
message and abort if this is not the case. Only call map_region()
for controllers mapped into Memory space.
Low/full speed USB devices attached directly to the root hub must be
rerouted to a companion controller. We can't rely on the BIOS to do
this for us. This requires us to initialise the EHCI device before
initialising any of its companions.
This also allows us to support keyboards attached via a high speed
hub on a system with EHCI plus companions.
