NuKVM/memtest86plus
3
0
Fork 0
mirror of https://github.com/memtest86plus/memtest86plus.git synced 2024-11-23 08:26:23 -06:00
Code Issues Packages Projects Releases Wiki Activity
spd_decoding_later
memtest86plus/system/xhci.c
Martin Whitaker 148dfd4d54 Apply the USB_2_STEP_INIT option when using an XHCI controller. 
This was added to the generic assign_address() method, but the XHCI
driver overrides that.
2022-08-05 20:48:24 +01:00

1177 lines
43 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2021-2022 Martin Whitaker.
#include <stdbool.h>
#include <stdint.h>
#include "heap.h"
#include "memrw32.h"
#include "memsize.h"
#include "usb.h"
#include "vmem.h"
#include "string.h"
#include "unistd.h"
#include "xhci.h"
#define QEMU_WORKAROUND 1
//------------------------------------------------------------------------------
// Constants
//------------------------------------------------------------------------------
// Values defined by the XHCI specification.
// Basic limits
#define XHCI_MAX_PORTS 255
#define XHCI_MAX_SLOTS 255
#define XHCI_MAX_CONTEXT_SIZE 64
#define XHCI_MAX_IP_CONTEXT_SIZE (33 * XHCI_MAX_CONTEXT_SIZE)
#define XHCI_MAX_OP_CONTEXT_SIZE (32 * XHCI_MAX_CONTEXT_SIZE)
// Extended capability ID values
#define XHCI_EXT_CAP_LEGACY_SUPPORT 1
#define XHCI_EXT_CAP_SUPPORTED_PROTOCOL 2
// USB Command register
#define XHCI_USBCMD_R_S 0x00000001 // Run/Stop
#define XHCI_USBCMD_HCRST 0x00000002 // Host Controller Reset
#define XHCI_USBCMD_INTE 0x00000004 // Interrupter Enable
#define XHCI_USBCMD_HSEE 0x00000008 // Host System Error Enable
// USB Status register
#define XHCI_USBSTS_HCH 0x00000001 // Host Controller Halted
#define XHCI_USBSTS_HSE 0x00000004 // Host System Error
#define XHCI_USBSTS_CNR 0x00000800 // Controller Not Ready
// Port Status and Control register
#define XHCI_PORT_SC_CCS 0x00000001 // Current Connect Status
#define XHCI_PORT_SC_PED 0x00000002 // Port Enable/Disable
#define XHCI_PORT_SC_OCA 0x00000004 // Over-Current
#define XHCI_PORT_SC_PR 0x00000010 // Port Reset
#define XHCI_PORT_SC_PLS 0x000001e0 // Port Link State
#define XHCI_PORT_SC_PP 0x00000200 // Port Power
#define XHCI_PORT_SC_PS 0x00003c00 // Port Speed
#define XHCI_PORT_SC_PRC 0x00200000 // Port Reset Change
#define XHCI_PORT_SC_PS_OFFSET 10 // first bit of Port Speed
// Transfer Request Block data structure
#define XHCI_TRB_ENT (1 << 1) // Evaluate Next TRB
#define XHCI_TRB_TC (1 << 1) // Toggle Cycle
#define XHCI_TRB_ISP (1 << 2) // Interrupt on Short Packet
#define XHCI_TRB_NS (1 << 3) // No Snoop
#define XHCI_TRB_CH (1 << 4) // Chain bit
#define XHCI_TRB_IOC (1 << 5) // Interrupt on Completion
#define XHCI_TRB_IDT (1 << 6) // Immediate Data
#define XHCI_TRB_BEI (1 << 9) // Block Event Interrupt
#define XHCI_TRB_BSR (1 << 9) // Block Set Address Request
#define XHCI_TRB_TYPE (63 << 10)
#define XHCI_TRB_NORMAL (1 << 10)
#define XHCI_TRB_SETUP_STAGE (2 << 10)
#define XHCI_TRB_DATA_STAGE (3 << 10)
#define XHCI_TRB_STATUS_STAGE (4 << 10)
#define XHCI_TRB_LINK (6 << 10)
#define XHCI_TRB_ENABLE_SLOT (9 << 10)
#define XHCI_TRB_DISABLE_SLOT (10 << 10)
#define XHCI_TRB_ADDRESS_DEVICE (11 << 10)
#define XHCI_TRB_CONFIGURE_ENDPOINT (12 << 10)
#define XHCI_TRB_EVALUATE_CONTEXT (13 << 10)
#define XHCI_TRB_NOOP (23 << 10)
#define XHCI_TRB_TRANSFER_EVENT (32 << 10)
#define XHCI_TRB_COMMAND_COMPLETE (33 << 10)
#define XHCI_TRB_TRT_NO_DATA (0 << 16) // Transfer Type (Setup Stage TRB)
#define XHCI_TRB_TRT_OUT (2 << 16) // Transfer Type (Setup Stage TRB)
#define XHCI_TRB_TRT_IN (3 << 16) // Transfer Type (Setup Stage TRB)
#define XHCI_TRB_DIR_OUT (0 << 16) // Direction (Data/Status Stage TRB)
#define XHCI_TRB_DIR_IN (1 << 16) // Direction (Data/Status Stage TRB)
#define XHCI_TRB_USB2_SLOT (0 << 16) // Slot Type (Enable Slot TRB)
#define XHCI_TRB_USB3_SLOT (0 << 16) // Slot Type (Enable Slot TRB)
// Add Context flags
#define XHCI_CONTEXT_A(n) (1 << (n))
// Port Speed values
#define XHCI_FULL_SPEED 1
#define XHCI_LOW_SPEED 2
#define XHCI_HIGH_SPEED 3
// Endpoint Type values
#define XHCI_EP_NOT_VALID 0
#define XHCI_EP_ISOCH_OUT 1
#define XHCI_EP_BULK_OUT 2
#define XHCI_EP_INTERRUPT_OUT 3
#define XHCI_EP_CONTROL 4
#define XHCI_EP_ISOCH_IN 5
#define XHCI_EP_BULK_IN 6
#define XHCI_EP_INTERRUPT_IN 7
// Event Completion Code values
#define XHCI_EVENT_CC_SUCCESS 1
#define XHCI_EVENT_CC_TIMEOUT 191 // specific to this driver
// Values specific to this driver.
#define PORT_TYPE_PST_MASK 0x1f // Protocol Slot Type mask
#define PORT_TYPE_USB2 0x40
#define PORT_TYPE_USB3 0x80
#define MAX_KEYBOARDS 8 // per host controller
#define WS_CR_SIZE 8 // TRBs (multiple of 4 to maintain 64 byte alignment)
#define WS_ER_SIZE 16 // TRBs (multiple of 4 to maintain 64 byte alignment)
#define WS_ERST_SIZE 4 // entries (multiple of 4 to maintain 64 byte alignment)
#define EP_TR_SIZE 8 // TRBs (multiple of 4 to maintain 64 byte alignment)
#define MILLISEC 1000 // in microseconds
#define DEVICE_WS_SIZE (XHCI_MAX_OP_CONTEXT_SIZE + 2 * sizeof(ep_tr_t))
//------------------------------------------------------------------------------
// Types
//------------------------------------------------------------------------------
// Register sets defined by the XHCI specification.
typedef struct {
uint8_t cap_length;
uint8_t reserved;
uint16_t hci_version;
uint32_t hcs_params1;
uint32_t hcs_params2;
uint32_t hcs_params3;
uint32_t hcc_params1;
uint32_t db_offset;
uint32_t rts_offset;
uint32_t hcc_params2;
} xhci_cap_regs_t;
typedef volatile struct {
uint32_t sc;
uint32_t pmsc;
uint32_t li;
uint32_t hlpmc;
} xhci_port_regs_t;
typedef volatile struct {
uint32_t usb_command;
uint32_t usb_status;
uint32_t page_size;
uint32_t reserved1[2];
uint32_t dn_control;
uint64_t cr_control;
uint32_t reserved2[4];
uint64_t dcbaap;
uint32_t config;
uint32_t reserved3[241];
xhci_port_regs_t port_regs[];
} xhci_op_regs_t;
typedef volatile struct {
uint32_t management;
uint32_t moderation;
uint32_t erst_size;
uint32_t reserved;
uint64_t erst_addr;
uint64_t erdp;
} xhci_int_regs_t;
typedef volatile struct {
uint32_t mf_index;
uint32_t reserved[7];
xhci_int_regs_t ir[];
} xhci_rt_regs_t;
typedef volatile uint32_t xhci_db_reg_t;
// Extended capability structures defined by the XHCI specification.
typedef struct {
uint8_t id;
uint8_t next_offset;
uint8_t id_specific[2];
} xhci_ext_cap_t;
typedef volatile struct {
uint8_t id;
uint8_t next_offset;
uint8_t bios_owns;
uint8_t host_owns;
uint32_t ctrl_stat;
} xhci_legacy_support_t;
typedef struct {
uint8_t id;
uint8_t next_offset;
uint8_t revision_minor;
uint8_t revision_major;
uint32_t name_string;
uint8_t port_offset;
uint8_t port_count;
uint16_t params1;
uint32_t params2;
uint32_t speed_id[];
} xhci_supported_protocol_t;
// Data structures defined by the XHCI specification.
typedef struct {
uint32_t drop_context_flags;
uint32_t add_context_flags;
uint32_t reserved1[5];
uint8_t config_value;
uint8_t interface_num;
uint8_t alternate_setting;
uint8_t reserved2;
} xhci_ctrl_context_t __attribute__ ((aligned (16)));
typedef struct {
uint32_t params1;
uint16_t max_exit_latency;
uint8_t root_hub_port_num;
uint8_t num_ports;
uint8_t parent_slot_id;
uint8_t parent_port_num;
uint16_t params2;
uint8_t usb_dev_addr;
uint8_t reserved1;
uint8_t reserved2;
uint8_t slot_state;
uint32_t reserved3[4];
} xhci_slot_context_t __attribute__ ((aligned (16)));
typedef struct {
uint8_t state;
uint8_t params1;
uint8_t interval;
uint8_t max_esit_payload_h;
uint8_t params2;
uint8_t max_burst_size;
uint16_t max_packet_size;
uint64_t tr_dequeue_ptr;
uint16_t average_trb_length;
uint16_t max_esit_payload_l;
uint32_t reserved[3];
} xhci_ep_context_t __attribute__ ((aligned (16)));
typedef struct {
xhci_ctrl_context_t ctrl;
xhci_slot_context_t slot;
xhci_ep_context_t ep[31];
} xhci_input_context_t __attribute__ ((aligned (16)));
typedef volatile struct {
uint64_t params1;
uint32_t params2;
uint32_t control;
} xhci_trb_t __attribute__ ((aligned (16)));
typedef volatile struct {
uint64_t segment_addr;
uint16_t segment_size;
uint16_t reserved1;
uint32_t reserved2;
} xhci_erst_entry_t __attribute__ ((aligned (16)));
// Data structures specific to this driver.
typedef volatile struct {
xhci_trb_t tr[EP_TR_SIZE];
uint32_t enqueue_state;
uint32_t padding[15];
} ep_tr_t __attribute__ ((aligned (64)));
typedef struct {
hcd_workspace_t base_ws;
// System memory data structures used by the host controller.
xhci_trb_t cr [WS_CR_SIZE] __attribute__ ((aligned (64))); // command ring
xhci_trb_t er [WS_ER_SIZE] __attribute__ ((aligned (64))); // event ring
xhci_erst_entry_t erst [WS_ERST_SIZE] __attribute__ ((aligned (64))); // event ring segment table
// Keyboard data transfer rings
ep_tr_t kbd_tr [MAX_KEYBOARDS];
// Keyboard data transfer buffers.
hid_kbd_rpt_t kbd_rpt [MAX_KEYBOARDS];
// Saved keyboard reports.
hid_kbd_rpt_t prev_kbd_rpt[MAX_KEYBOARDS];
// Pointers to the host controller registers.
xhci_op_regs_t *op_regs;
xhci_rt_regs_t *rt_regs;
xhci_db_reg_t *db_regs;
// Device context information.
uint64_t *device_context_index;
size_t context_size;
// Host controller TRB ring state (cycle and index).
uint32_t cr_enqueue_state;
uint32_t er_dequeue_state;
// Input context for controller commands.
uintptr_t input_context_addr;
// Transient values used during device enumeration and configuration.
uintptr_t initial_heap_mark;
uintptr_t control_ep_tr_addr;
uintptr_t interrupt_ep_tr_addr;
// Keyboard slot ID lookup table
uint8_t kbd_slot_id [MAX_KEYBOARDS];
// Keyboard endpoint ID lookup table
uint8_t kbd_ep_id [MAX_KEYBOARDS];
} workspace_t __attribute__ ((aligned (64)));
//------------------------------------------------------------------------------
// Private Functions
//------------------------------------------------------------------------------
static size_t round_up(size_t size, size_t alignment)
{
return (size + alignment - 1) & ~(alignment - 1);
}
// The read64 and write64 functions provided here provide compatibility with both
// 32-bit and 64-bit hosts and with both 32-bit and 64-bit XHCI controllers.
static uint64_t read64(const volatile uint64_t *ptr)
{
uint32_t val_l = read32((const volatile uint32_t *)ptr + 0);
uint32_t val_h = read32((const volatile uint32_t *)ptr + 1);
return (uint64_t)val_h << 32 | (uint64_t)val_l;
}
static void write64(volatile uint64_t *ptr, uint64_t val)
{
write32((volatile uint32_t *)ptr + 0, (uint32_t)(val >> 0));
write32((volatile uint32_t *)ptr + 1, (uint32_t)(val >> 32));
}
#ifdef QEMU_WORKAROUND
static void memcpy32(void *dst, const void *src, size_t size)
{
uint32_t *dst_word = (uint32_t *)dst;
uint32_t *src_word = (uint32_t *)src;
size_t num_words = size / sizeof(uint32_t);
for (size_t i = 0; i < num_words; i++) {
write32(&dst_word[i], read32(&src_word[i]));
}
}
#endif
static usb_speed_t xhci_to_usb_speed(int xhci_speed)
{
switch (xhci_speed) {
case XHCI_LOW_SPEED:
return USB_SPEED_LOW;
case XHCI_FULL_SPEED:
return USB_SPEED_FULL;
case XHCI_HIGH_SPEED:
return USB_SPEED_HIGH;
default:
return USB_SPEED_UNKNOWN;
}
}
static int usb_to_xhci_speed(usb_speed_t usb_speed)
{
switch (usb_speed) {
case USB_SPEED_LOW:
return XHCI_LOW_SPEED;
case USB_SPEED_FULL:
return XHCI_FULL_SPEED;
case USB_SPEED_HIGH:
return XHCI_HIGH_SPEED;
default:
return 0;
}
}
static int xhci_ep_interval(int config_interval, usb_speed_t device_speed)
{
if (device_speed < USB_SPEED_HIGH) {
int log2_interval = 7;
while ((1 << log2_interval) > config_interval) {
log2_interval--;
}
return 3 + log2_interval;
} else {
if (config_interval >= 1 && config_interval <= 16) {
return config_interval - 1;
} else {
return 3;
}
}
}
static bool reset_host_controller(xhci_op_regs_t *op_regs)
{
write32(&op_regs->usb_command, read32(&op_regs->usb_command) | XHCI_USBCMD_HCRST);
usleep(1*MILLISEC); // some controllers need time to recover from reset
return wait_until_clr(&op_regs->usb_command, XHCI_USBCMD_HCRST, 1000*MILLISEC)
&& wait_until_clr(&op_regs->usb_status, XHCI_USBSTS_CNR, 1000*MILLISEC);
}
static bool start_host_controller(xhci_op_regs_t *op_regs)
{
write32(&op_regs->usb_command, read32(&op_regs->usb_command) | XHCI_USBCMD_R_S);
return wait_until_clr(&op_regs->usb_status, XHCI_USBSTS_HCH, 1000*MILLISEC);
}
static bool halt_host_controller(xhci_op_regs_t *op_regs)
{
write32(&op_regs->usb_command, read32(&op_regs->usb_command) & ~XHCI_USBCMD_R_S);
return wait_until_set(&op_regs->usb_status, XHCI_USBSTS_HCH, 1000*MILLISEC);
}
static int get_xhci_device_speed(xhci_op_regs_t *op_regs, int port_idx)
{
return (read32(&op_regs->port_regs[port_idx].sc) & XHCI_PORT_SC_PS) >> XHCI_PORT_SC_PS_OFFSET;
}
static bool reset_xhci_port(xhci_op_regs_t *op_regs, int port_idx)
{
write32(&op_regs->port_regs[port_idx].sc, XHCI_PORT_SC_PP | XHCI_PORT_SC_PR | XHCI_PORT_SC_PRC);
return wait_until_set(&op_regs->port_regs[port_idx].sc, XHCI_PORT_SC_PRC, 1000*MILLISEC);
}
static void disable_xhci_port(xhci_op_regs_t *op_regs, int port_idx)
{
write32(&op_regs->port_regs[port_idx].sc, XHCI_PORT_SC_PP | XHCI_PORT_SC_PED);
(void)wait_until_clr(&op_regs->port_regs[port_idx].sc, XHCI_PORT_SC_PED, 1000*MILLISEC);
}
static void ring_host_controller_doorbell(xhci_db_reg_t *db_regs)
{
write32(&db_regs[0], 0);
}
static void ring_device_doorbell(xhci_db_reg_t *db_regs, int slot_id, int db_target)
{
write32(&db_regs[slot_id], db_target);
}
static uint32_t event_type(const xhci_trb_t *event)
{
return event->control & XHCI_TRB_TYPE;
}
static int event_cc(const xhci_trb_t *event)
{
return event->params2 >> 24;
}
static int event_slot_id(const xhci_trb_t *event)
{
return event->control >> 24;
}
static int event_ep_id(const xhci_trb_t *event)
{
return (event->control >> 16) & 0x1f;
}
static uint32_t enqueue_trb(xhci_trb_t *trb_ring, uint32_t ring_size, uint32_t enqueue_state,
uint32_t control, uint64_t params1, uint32_t params2)
{
// The ring enqueue state records the current cycle and the next free slot.
uint32_t cycle = enqueue_state / ring_size;
uint32_t index = enqueue_state % ring_size;
// If at the last slot, insert a Link TRB and start a new cycle.
if (index == (ring_size - 1)) {
write64(&trb_ring[index].params1, (uintptr_t)trb_ring);
write32(&trb_ring[index].params2, 0);
write32(&trb_ring[index].control, XHCI_TRB_LINK | XHCI_TRB_TC | cycle);
cycle ^= 1;
index = 0;
}
// Insert the TRB.
write64(&trb_ring[index].params1, params1);
write32(&trb_ring[index].params2, params2);
write32(&trb_ring[index].control, control | cycle);
index++;
// Return the new ring enqueue state.
return cycle * ring_size + index;
}
static void enqueue_xhci_command(workspace_t *ws, uint32_t control, uint64_t params1, uint32_t params2)
{
ws->cr_enqueue_state = enqueue_trb(ws->cr, WS_CR_SIZE, ws->cr_enqueue_state, control, params1, params2);
}
static bool get_xhci_event(workspace_t *ws, xhci_trb_t *event)
{
// Get the event ring dequeue state, which records the current cycle and next slot to be read.
uint32_t dequeue_state = ws->er_dequeue_state;
uint32_t cycle = dequeue_state / WS_ER_SIZE;
uint32_t index = dequeue_state % WS_ER_SIZE;
// Copy the next slot.
event->params1 = ws->er[index].params1;
event->params2 = ws->er[index].params2;
event->control = ws->er[index].control;
// If the cycle count doesn't match, that slot hasn't been filled yet.
if ((event->control & 0x1) != cycle) return false;
// Advance the dequeue pointer.
write64(&ws->rt_regs->ir[0].erdp, (uintptr_t)(&ws->er[index]));
// Update the event ring dequeue state.
if (index == (WS_ER_SIZE - 1)) {
cycle ^= 1;
index = 0;
} else {
index++;
}
ws->er_dequeue_state = cycle * WS_ER_SIZE + index;
return true;
}
static uint32_t wait_for_xhci_event(workspace_t *ws, uint32_t wanted_type, int max_time, xhci_trb_t *event)
{
int timer = max_time >> 3;
while (!get_xhci_event(ws, event) || event_type(event) != wanted_type) {
if (timer == 0) return XHCI_EVENT_CC_TIMEOUT;
usleep(8);
timer--;
}
return event_cc(event);
}
static void issue_setup_stage_trb(ep_tr_t *ep_tr, const usb_setup_pkt_t *setup_pkt)
{
uint64_t params1 = *(const uint64_t *)setup_pkt;
uint32_t params2 = sizeof(usb_setup_pkt_t);
uint32_t control = XHCI_TRB_SETUP_STAGE | XHCI_TRB_TRT_IN | XHCI_TRB_IDT;
ep_tr->enqueue_state = enqueue_trb(ep_tr->tr, EP_TR_SIZE, ep_tr->enqueue_state, control, params1, params2);
}
static void issue_data_stage_trb(ep_tr_t *ep_tr, const void *buffer, uint32_t dir, size_t transfer_length)
{
uint64_t params1 = (uintptr_t)buffer;
uint32_t params2 = transfer_length;
uint32_t control = XHCI_TRB_DATA_STAGE | dir;
ep_tr->enqueue_state = enqueue_trb(ep_tr->tr, EP_TR_SIZE, ep_tr->enqueue_state, control, params1, params2);
}
static void issue_status_stage_trb(ep_tr_t *ep_tr, uint32_t dir)
{
uint32_t control = XHCI_TRB_STATUS_STAGE | dir | XHCI_TRB_IOC;
ep_tr->enqueue_state = enqueue_trb(ep_tr->tr, EP_TR_SIZE, ep_tr->enqueue_state, control, 0, 0);
}
static void issue_normal_trb(ep_tr_t *ep_tr, const void *buffer, uint32_t dir, size_t transfer_length)
{
uint64_t params1 = (uintptr_t)buffer;
uint32_t params2 = transfer_length;
uint32_t control = XHCI_TRB_NORMAL | dir | XHCI_TRB_IOC;
ep_tr->enqueue_state = enqueue_trb(ep_tr->tr, EP_TR_SIZE, ep_tr->enqueue_state, control, params1, params2);
}
//------------------------------------------------------------------------------
// Driver Methods
//------------------------------------------------------------------------------
static bool setup_request(const usb_hcd_t *hcd, const usb_ep_t *ep, const usb_setup_pkt_t *setup_pkt)
{
workspace_t *ws = (workspace_t *)hcd->ws;
ep_tr_t *ep_tr = (ep_tr_t *)ep->driver_data;
xhci_trb_t event;
issue_setup_stage_trb(ep_tr, setup_pkt);
issue_status_stage_trb(ep_tr, XHCI_TRB_DIR_IN);
ring_device_doorbell(ws->db_regs, ep->device_id, 1);
return (wait_for_xhci_event(ws, XHCI_TRB_TRANSFER_EVENT, 5000*MILLISEC, &event) == XHCI_EVENT_CC_SUCCESS);
}
static bool get_data_request(const usb_hcd_t *hcd, const usb_ep_t *ep, const usb_setup_pkt_t *setup_pkt,
const void *buffer, size_t length)
{
workspace_t *ws = (workspace_t *)hcd->ws;
ep_tr_t *ep_tr = (ep_tr_t *)ep->driver_data;
xhci_trb_t event;
issue_setup_stage_trb(ep_tr, setup_pkt);
issue_data_stage_trb(ep_tr, buffer, XHCI_TRB_DIR_IN, length);
issue_status_stage_trb(ep_tr, XHCI_TRB_DIR_OUT);
ring_device_doorbell(ws->db_regs, ep->device_id, 1);
return (wait_for_xhci_event(ws, XHCI_TRB_TRANSFER_EVENT, 5000*MILLISEC, &event) == XHCI_EVENT_CC_SUCCESS);
}
static bool reset_root_hub_port(const usb_hcd_t *hcd, int port_num)
{
const workspace_t *ws = (const workspace_t *)hcd->ws;
return reset_xhci_port(ws->op_regs, port_num - 1);
}
static int allocate_slot(const usb_hcd_t *hcd)
{
workspace_t *ws = (workspace_t *)hcd->ws;
xhci_trb_t event;
// Record the heap state to allow us to free memory.
ws->initial_heap_mark = heap_mark(HEAP_TYPE_LM_1);
// Allocate and initialise a private workspace for this device.
uintptr_t device_workspace_addr = heap_alloc(HEAP_TYPE_LM_1, DEVICE_WS_SIZE, PAGE_SIZE);
if (device_workspace_addr == 0) {
goto free_memory;
}
memset((void *)device_workspace_addr, 0, DEVICE_WS_SIZE);
ws->control_ep_tr_addr = device_workspace_addr + XHCI_MAX_OP_CONTEXT_SIZE;
ws->interrupt_ep_tr_addr = device_workspace_addr + XHCI_MAX_OP_CONTEXT_SIZE + sizeof(ep_tr_t);
// Allocate a device slot and set up its output context.
enqueue_xhci_command(ws, XHCI_TRB_ENABLE_SLOT | XHCI_TRB_USB2_SLOT, 0, 0);
ring_host_controller_doorbell(ws->db_regs);
if (wait_for_xhci_event(ws, XHCI_TRB_COMMAND_COMPLETE, 100*MILLISEC, &event) != XHCI_EVENT_CC_SUCCESS) {
goto free_memory;
}
int slot_id = event_slot_id(&event);
write64(&ws->device_context_index[slot_id], device_workspace_addr);
return slot_id;
free_memory:
heap_rewind(HEAP_TYPE_LM_1, ws->initial_heap_mark);
return 0;
}
static bool release_slot(const usb_hcd_t *hcd, int slot_id)
{
workspace_t *ws = (workspace_t *)hcd->ws;
xhci_trb_t event;
enqueue_xhci_command(ws, XHCI_TRB_DISABLE_SLOT | slot_id << 24, 0, 0);
ring_host_controller_doorbell(ws->db_regs);
if (wait_for_xhci_event(ws, XHCI_TRB_COMMAND_COMPLETE, 100*MILLISEC, &event) != XHCI_EVENT_CC_SUCCESS) {
return false;
}
write64(&ws->device_context_index[slot_id], 0);
heap_rewind(HEAP_TYPE_LM_1, ws->initial_heap_mark);
return true;
}
static bool assign_address(const usb_hcd_t *hcd, const usb_hub_t *hub, int port_num,
usb_speed_t device_speed, int device_id, usb_ep_t *ep0)
{
workspace_t *ws = (workspace_t *)hcd->ws;
usb_setup_pkt_t setup_pkt;
uint8_t *data_buffer = hcd->ws->data_buffer;
xhci_trb_t event;
// Initialise the control endpoint descriptor. With the XHCI, we never need to know the USB address of the
// device, so device_id actually contains the slot ID.
ep0->device_speed = device_speed;
ep0->device_id = device_id;
ep0->interface_num = 0;
ep0->endpoint_num = 0;
ep0->max_packet_size = 0;
ep0->interval = 0;
// Prepare the input context for the ADDRESS_DEVICE command.
memset((xhci_input_context_t *)ws->input_context_addr, 0, sizeof(xhci_input_context_t));
xhci_ctrl_context_t *ctrl_context = (xhci_ctrl_context_t *)ws->input_context_addr;
ctrl_context->add_context_flags = XHCI_CONTEXT_A(0) | XHCI_CONTEXT_A(1);
xhci_slot_context_t *slot_context = (xhci_slot_context_t *)(ws->input_context_addr + ws->context_size);
slot_context->params1 = 1 << 27 | usb_to_xhci_speed(device_speed) << 20;
if (hub->level > 0) {
uint32_t route = usb_route(hub, port_num);
slot_context->params1 |= route & 0xfffff;
slot_context->root_hub_port_num = route >> 24;
if (device_speed < USB_SPEED_HIGH && hub->ep0->device_speed == USB_SPEED_HIGH) {
slot_context->parent_slot_id = hub->ep0->device_id;
slot_context->parent_port_num = port_num;
}
} else {
slot_context->root_hub_port_num = port_num;
}
xhci_ep_context_t *ep_context = (xhci_ep_context_t *)(ws->input_context_addr + 2 * ws->context_size);
ep_context->params2 = XHCI_EP_CONTROL << 3 | 3 << 1; // EP Type | CErr
ep_context->max_burst_size = 0;
ep_context->max_packet_size = default_max_packet_size(device_speed);
ep_context->tr_dequeue_ptr = ws->control_ep_tr_addr | 1;
ep_context->average_trb_length = 8;
// Initialise the control endpoint transfer ring.
ep_tr_t *ep_tr = (ep_tr_t *)ws->control_ep_tr_addr;
ep_tr->enqueue_state = EP_TR_SIZE; // cycle = 1, index = 0
ep0->driver_data = (uintptr_t)ep_tr;
// Set the device address. For full speed devices we need to read the first 8 bytes of the device descriptor
// to determine the maximum packet size the device supports and update the device context accordingly. For
// compatibility with some older USB devices we need to read the first 8 bytes of the device descriptor before
// actually setting the address. We can conveniently combine both these requirements.
size_t fetch_length = sizeof(usb_device_desc_t);
uint32_t command_flags = 0;
if (device_speed < USB_SPEED_HIGH || usb_init_options & USB_2_STEP_INIT) {
fetch_length = 8;
command_flags = XHCI_TRB_BSR;
}
set_address:
enqueue_xhci_command(ws, XHCI_TRB_ADDRESS_DEVICE | command_flags | device_id << 24, ws->input_context_addr, 0);
ring_host_controller_doorbell(ws->db_regs);
if (wait_for_xhci_event(ws, XHCI_TRB_COMMAND_COMPLETE, 5000*MILLISEC, &event) != XHCI_EVENT_CC_SUCCESS) {
return false;
}
if (command_flags == 0) {
usleep(2*MILLISEC + 1*MILLISEC); // USB set address recovery time (plus a bit).
}
build_setup_packet(&setup_pkt, USB_REQ_FROM_DEVICE, USB_GET_DESCRIPTOR, USB_DESC_DEVICE << 8, 0, fetch_length);
if (!get_data_request(hcd, ep0, &setup_pkt, data_buffer, fetch_length)
|| !valid_usb_device_descriptor(data_buffer)) {
return false;
}
if (command_flags != 0) {
usb_device_desc_t *device = (usb_device_desc_t *)data_buffer;
ep0->max_packet_size = device->max_packet_size;
if (!valid_usb_max_packet_size(device->max_packet_size, device_speed)) {
return false;
}
if (usb_init_options & USB_EXTRA_RESET) {
if (!reset_usb_hub_port(hcd, hub, port_num)) {
return false;
}
}
ep_context->max_packet_size = device->max_packet_size;
ep_context->tr_dequeue_ptr += 3 * sizeof(xhci_trb_t);
fetch_length = sizeof(usb_device_desc_t);
command_flags = 0;
goto set_address;
}
hcd->ws->data_length = fetch_length;
return true;
}
static bool configure_interrupt_endpoint(workspace_t *ws, const usb_ep_t *ep, int hub_flag, int num_ports,
int tt_think_time, uintptr_t tr_addr, size_t rpt_size)
{
xhci_trb_t event;
// Calculate the endpoint ID. This is used both to select an endpoint context and as a doorbell target.
int ep_id = 2 * ep->endpoint_num + 1; // EP <N> IN
// The input context has already been initialised, so we just need to change the values used by the
// CONFIGURE_ENDPOINT command before issuing the command.
xhci_ctrl_context_t *ctrl_context = (xhci_ctrl_context_t *)ws->input_context_addr;
ctrl_context->add_context_flags = XHCI_CONTEXT_A(0) | XHCI_CONTEXT_A(ep_id);
xhci_slot_context_t *slot_context = (xhci_slot_context_t *)(ws->input_context_addr + ws->context_size);
slot_context->params1 = ep_id << 27 | hub_flag << 26 | (slot_context->params1 & 0x00ffffff);
slot_context->num_ports = num_ports;
slot_context->params2 = tt_think_time;
xhci_ep_context_t *ep_context = (xhci_ep_context_t *)(ws->input_context_addr + (1 + ep_id) * ws->context_size);
ep_context->params1 = 0;
ep_context->params2 = XHCI_EP_INTERRUPT_IN << 3 | 3 << 1; // EP Type | CErr
ep_context->interval = xhci_ep_interval(ep->interval, ep->device_speed);
ep_context->max_burst_size = 0;
ep_context->max_packet_size = ep->max_packet_size;
ep_context->tr_dequeue_ptr = tr_addr | 1;
ep_context->average_trb_length = rpt_size;
ep_context->max_esit_payload_l = ep->max_packet_size;
ep_context->max_esit_payload_h = 0;
enqueue_xhci_command(ws, XHCI_TRB_CONFIGURE_ENDPOINT | ep->device_id << 24, ws->input_context_addr, 0);
ring_host_controller_doorbell(ws->db_regs);
return (wait_for_xhci_event(ws, XHCI_TRB_COMMAND_COMPLETE, 100*MILLISEC, &event) == XHCI_EVENT_CC_SUCCESS);
}
static bool configure_hub_ep(const usb_hcd_t *hcd, const usb_ep_t *ep, const usb_hub_t *hub)
{
workspace_t *ws = (workspace_t *)hcd->ws;
return configure_interrupt_endpoint(ws, ep, 1, hub->num_ports, hub->tt_think_time,
ws->interrupt_ep_tr_addr, (hub->num_ports + 7) / 8);
}
static bool configure_kbd_ep(const usb_hcd_t *hcd, const usb_ep_t *ep, int kbd_idx)
{
workspace_t *ws = (workspace_t *)hcd->ws;
// Fill in the lookup tables in the workspace.
ws->kbd_slot_id[kbd_idx] = ep->device_id;
ws->kbd_ep_id [kbd_idx] = 2 * ep->endpoint_num + 1; // EP <N> IN
// Configure the controller.
return configure_interrupt_endpoint(ws, ep, 0, 0, 0, (uintptr_t)(&ws->kbd_tr[kbd_idx]), sizeof(hid_kbd_rpt_t));
}
static int identify_keyboard(workspace_t *ws, int slot_id, int ep_id)
{
for (int kbd_idx = 0; kbd_idx < MAX_KEYBOARDS; kbd_idx++) {
if (slot_id == ws->kbd_slot_id[kbd_idx] && ep_id == ws->kbd_ep_id[kbd_idx]) {
return kbd_idx;
}
}
return -1;
}
static void poll_keyboards(const usb_hcd_t *hcd)
{
workspace_t *ws = (workspace_t *)hcd->ws;
xhci_trb_t event;
while (get_xhci_event(ws, &event)) {
if (event_type(&event) != XHCI_TRB_TRANSFER_EVENT || event_cc(&event) != XHCI_EVENT_CC_SUCCESS) continue;
int kbd_idx = identify_keyboard(ws, event_slot_id(&event), event_ep_id(&event));
if (kbd_idx < 0) continue;
hid_kbd_rpt_t *kbd_rpt = &ws->kbd_rpt[kbd_idx];
hid_kbd_rpt_t *prev_kbd_rpt = &ws->prev_kbd_rpt[kbd_idx];
if (process_usb_keyboard_report(hcd, kbd_rpt, prev_kbd_rpt)) {
*prev_kbd_rpt = *kbd_rpt;
}
ep_tr_t *kbd_tr = &ws->kbd_tr[kbd_idx];
issue_normal_trb(kbd_tr, kbd_rpt, XHCI_TRB_DIR_IN, sizeof(hid_kbd_rpt_t));
ring_device_doorbell(ws->db_regs, ws->kbd_slot_id[kbd_idx], ws->kbd_ep_id[kbd_idx]);
}
}
//------------------------------------------------------------------------------
// Driver Method Table
//------------------------------------------------------------------------------
static const hcd_methods_t methods = {
.reset_root_hub_port = reset_root_hub_port,
.allocate_slot = allocate_slot,
.release_slot = release_slot,
.assign_address = assign_address,
.configure_hub_ep = configure_hub_ep,
.configure_kbd_ep = configure_kbd_ep,
.setup_request = setup_request,
.get_data_request = get_data_request,
.poll_keyboards = poll_keyboards
};
//------------------------------------------------------------------------------
// Public Functions
//------------------------------------------------------------------------------
bool xhci_init(uintptr_t base_addr, usb_hcd_t *hcd)
{
uint8_t port_type[XHCI_MAX_PORTS];
memset(port_type, 0, sizeof(port_type));
xhci_cap_regs_t *cap_regs = (xhci_cap_regs_t *)base_addr;
#ifdef QEMU_WORKAROUND
xhci_cap_regs_t cap_regs_copy;
memcpy32(&cap_regs_copy, cap_regs, sizeof(cap_regs_copy));
cap_regs = &cap_regs_copy;
#endif
// Walk the extra capabilities list.
uintptr_t ext_cap_base = base_addr;
uintptr_t ext_cap_offs = cap_regs->hcc_params1 >> 16;
while (ext_cap_offs != 0) {
ext_cap_base += ext_cap_offs * sizeof(uint32_t);
xhci_ext_cap_t *ext_cap = (xhci_ext_cap_t *)ext_cap_base;
#ifdef QEMU_WORKAROUND
xhci_ext_cap_t ext_cap_copy;
memcpy32(&ext_cap_copy, ext_cap, sizeof(ext_cap_copy));
ext_cap = &ext_cap_copy;
#endif
if (ext_cap->id == XHCI_EXT_CAP_LEGACY_SUPPORT) {
xhci_legacy_support_t *legacy_support = (xhci_legacy_support_t *)ext_cap_base;
// Take ownership from the SMM if necessary.
int timer = 1000;
legacy_support->host_owns |= 0x1;
while (legacy_support->bios_owns & 0x1) {
if (timer == 0) return false;
usleep(1*MILLISEC);
timer--;
}
}
if (ext_cap->id == XHCI_EXT_CAP_SUPPORTED_PROTOCOL) {
xhci_supported_protocol_t *protocol = (xhci_supported_protocol_t *)ext_cap_base;
#ifdef QEMU_WORKAROUND
xhci_supported_protocol_t protocol_copy;
memcpy32(&protocol_copy, protocol, sizeof(protocol_copy));
protocol = &protocol_copy;
#endif
// Record the ports covered by this protocol.
uint8_t protocol_type = protocol->params2 & 0x1f; // the Protocol Slot Type
switch (protocol->revision_major) {
case 0x02:
protocol_type |= PORT_TYPE_USB2;
break;
case 0x03:
protocol_type |= PORT_TYPE_USB3;
break;
}
#if 0
print_usb_info("protocol revision %i.%i type %i offset %i count %i",
protocol->revision_major, protocol->revision_minor / 16,
protocol_type, protocol->port_offset, protocol->port_count);
#endif
for (int i = 0; i < protocol->port_count; i++) {
int port_idx = protocol->port_offset + i - 1;
if (port_idx >= 0 && port_idx < XHCI_MAX_PORTS) {
port_type[port_idx] = protocol_type;
}
}
}
ext_cap_offs = ext_cap->next_offset;
}
xhci_op_regs_t *op_regs = (xhci_op_regs_t *)(base_addr + cap_regs->cap_length);
xhci_rt_regs_t *rt_regs = (xhci_rt_regs_t *)(base_addr + cap_regs->rts_offset);
xhci_db_reg_t *db_regs = (xhci_db_reg_t *)(base_addr + cap_regs->db_offset);
// Ensure the controller is halted and then reset it.
if (!halt_host_controller(op_regs)) return false;
if (!reset_host_controller(op_regs)) return false;
// Record the heap states to allow us to free memory.
uintptr_t initial_lm_heap_mark = heap_mark(HEAP_TYPE_LM_1);
uintptr_t initial_hm_heap_mark = heap_mark(HEAP_TYPE_HM_1);
// Record the controller page size.
uintptr_t xhci_page_size = (read32(&op_regs->page_size) & 0xffff) << 12;
// Find the maximum number of device slots the controller supports.
int max_slots = cap_regs->hcs_params1 & 0xff;
// Find the number of scratchpad buffers the controller wants.
uintptr_t num_scratchpad_buffers = ((cap_regs->hcs_params2 >> 21) & 0x1f) << 5
| ((cap_regs->hcs_params2 >> 27) & 0x1f);
// Allocate and clear the scratchpad memory on the heap. This must be aligned to the controller page size.
uintptr_t scratchpad_size = num_scratchpad_buffers * xhci_page_size;
uintptr_t scratchpad_paddr = heap_alloc(HEAP_TYPE_HM_1, scratchpad_size, xhci_page_size);
if (scratchpad_paddr == 0) {
goto no_keyboards_found;
}
uintptr_t scratchpad_vaddr = map_region(scratchpad_paddr, scratchpad_size, true);
if (scratchpad_vaddr == 0) {
goto no_keyboards_found;
}
memset((void *)scratchpad_vaddr, 0, scratchpad_size);
// Allocate and initialise the device context base address and scratchpad buffer arrays on the heap.
// Both need to be aligned on a 64 byte boundary.
uintptr_t device_context_index_size = (1 + max_slots) * sizeof(uint64_t);
uintptr_t scratchpad_buffer_index_offs = round_up(device_context_index_size, 64);
uintptr_t scratchpad_buffer_index_size = num_scratchpad_buffers * sizeof(uint64_t);
uintptr_t device_context_index_paddr = heap_alloc(HEAP_TYPE_HM_1, scratchpad_buffer_index_offs + scratchpad_buffer_index_size, 64);
if (device_context_index_paddr == 0) {
goto no_keyboards_found;
}
uintptr_t device_context_index_vaddr = map_region(device_context_index_paddr, scratchpad_buffer_index_offs + scratchpad_buffer_index_size, true);
if (device_context_index_vaddr == 0) {
goto no_keyboards_found;
}
memset((void *)device_context_index_vaddr, 0, device_context_index_size);
uint64_t *device_context_index = (uint64_t *)device_context_index_vaddr;
if (num_scratchpad_buffers > 0) {
uintptr_t scratchpad_buffer_index_paddr = device_context_index_paddr + scratchpad_buffer_index_offs;
uintptr_t scratchpad_buffer_index_vaddr = device_context_index_vaddr + scratchpad_buffer_index_offs;
device_context_index[0] = scratchpad_buffer_index_paddr;
uint64_t *scratchpad_buffer_index = (uint64_t *)scratchpad_buffer_index_vaddr;
for (uintptr_t i = 0; i < num_scratchpad_buffers; i++) {
scratchpad_buffer_index[i] = scratchpad_paddr + i * xhci_page_size;
}
}
// Allocate and initialise a workspace for this controller. This needs to be permanently mapped into virtual memory.
uintptr_t workspace_addr = heap_alloc(HEAP_TYPE_LM_1, sizeof(workspace_t), PAGE_SIZE);
if (workspace_addr == 0) {
goto no_keyboards_found;
}
workspace_t *ws = (workspace_t *)workspace_addr;
memset(ws, 0, sizeof(workspace_t));
ws->op_regs = op_regs;
ws->rt_regs = rt_regs;
ws->db_regs = db_regs;
ws->device_context_index = device_context_index;
ws->context_size = cap_regs->hcc_params1 & 0x4 ? 64 : 32;
ws->cr_enqueue_state = WS_CR_SIZE; // cycle = 1, index = 0
ws->er_dequeue_state = WS_ER_SIZE; // cycle = 1, index = 0
// Allocate and initialise the input context data structure. This needs to be contained within a single page.
ws->input_context_addr = heap_alloc(HEAP_TYPE_LM_1, XHCI_MAX_IP_CONTEXT_SIZE, PAGE_SIZE);
if (ws->input_context_addr == 0) {
goto no_keyboards_found;
}
memset((void *)ws->input_context_addr, 0, XHCI_MAX_IP_CONTEXT_SIZE);
// Initialise the driver object for this controller.
hcd->methods = &methods;
hcd->ws = &ws->base_ws;
// Initialise the ERST for the primary interrupter. We only use the first segment.
ws->erst[0].segment_addr = (uintptr_t)(&ws->er);
ws->erst[0].segment_size = WS_ER_SIZE;
write64(&rt_regs->ir[0].erdp, (uintptr_t)(&ws->er));
write32(&rt_regs->ir[0].erst_size, 1);
write64(&rt_regs->ir[0].erst_addr, (uintptr_t)(&ws->erst));
// Initialise and start the controller.
write64(&op_regs->cr_control, (read64(&op_regs->cr_control) & 0x30) | (uintptr_t)(&ws->cr) | 0x1);
write64(&op_regs->dcbaap, device_context_index_paddr);
write32(&op_regs->config, (read32(&op_regs->config) & 0xfffffc00) | max_slots);
if (!start_host_controller(op_regs)) {
goto no_keyboards_found;
}
// Construct a hub descriptor for the root hub.
usb_hub_t root_hub;
root_hub.ep0 = NULL;
root_hub.level = 0;
root_hub.route = 0;
root_hub.num_ports = cap_regs->hcs_params1 & 0xff;
root_hub.power_up_delay = 0;
usleep(100*MILLISEC); // USB maximum device attach time.
// Scan the ports, looking for hubs and keyboards.
usb_ep_t keyboards[MAX_KEYBOARDS];
int num_keyboards = 0;
int num_devices = 0;
for (int port_idx = 0; port_idx < root_hub.num_ports; port_idx++) {
// If we've filled the keyboard info table, abort now.
if (num_keyboards >= MAX_KEYBOARDS) break;
// We only expect to find keyboards on USB2 ports.
if (~port_type[port_idx] & PORT_TYPE_USB2) continue;
uint32_t port_status = read32(&op_regs->port_regs[port_idx].sc);
// Check if anything is connected to this port.
if (~port_status & XHCI_PORT_SC_CCS) continue;
// Reset the port.
if (!reset_xhci_port(op_regs, port_idx)) continue;
usleep(10*MILLISEC); // USB reset recovery time
port_status = read32(&op_regs->port_regs[port_idx].sc);
// Check the port is active.
if (~port_status & XHCI_PORT_SC_CCS) continue;
if (~port_status & XHCI_PORT_SC_PED) continue;
// Now the port has been enabled, we can determine the device speed.
usb_speed_t device_speed = xhci_to_usb_speed(get_xhci_device_speed(ws->op_regs, port_idx));
num_devices++;
// Allocate a controller slot for this device.
int slot_id = allocate_slot(hcd);
if (slot_id == 0) break;
// Look for keyboards attached directly or indirectly to this port.
if (find_attached_usb_keyboards(hcd, &root_hub, 1 + port_idx, device_speed, slot_id,
&num_devices, keyboards, MAX_KEYBOARDS, &num_keyboards)) {
continue;
}
// If we didn't find any keyboard interfaces, we disable the port and free the slot.
disable_xhci_port(op_regs, port_idx);
release_slot(hcd, slot_id);
}
print_usb_info(" Found %i device%s, %i keyboard%s",
num_devices, num_devices != 1 ? "s" : "",
num_keyboards, num_keyboards != 1 ? "s" : "");
if (num_keyboards == 0) {
(void)halt_host_controller(op_regs);
goto no_keyboards_found;
}
// Initialise the interrupt TRB ring for each keyboard interface.
for (int kbd_idx = 0; kbd_idx < num_keyboards; kbd_idx++) {
ep_tr_t *kbd_tr = &ws->kbd_tr[kbd_idx];
kbd_tr->enqueue_state = EP_TR_SIZE; // cycle = 1, index = 0
hid_kbd_rpt_t *kbd_rpt = &ws->kbd_rpt[kbd_idx];
issue_normal_trb(kbd_tr, kbd_rpt, XHCI_TRB_DIR_IN, sizeof(hid_kbd_rpt_t));
ring_device_doorbell(ws->db_regs, ws->kbd_slot_id[kbd_idx], ws->kbd_ep_id[kbd_idx]);
}
return true;
no_keyboards_found:
heap_rewind(HEAP_TYPE_LM_1, initial_lm_heap_mark);
heap_rewind(HEAP_TYPE_HM_1, initial_hm_heap_mark);
return false;
}
Reference in New Issue View Git Blame Copy Permalink