diff --git a/Gemfile b/Gemfile
index ff59bd7..7bbafbe 100644
--- a/Gemfile
+++ b/Gemfile
@@ -24,9 +24,9 @@ group :development do
     vagrant_gem_version = Gem::Version.new('2.2.8')
   end
 
-  vagrant_spec_verison = ENV['VAGRANT_SPEC_VERSION']
-  if !vagrant_spec_verison.nil? && !vagrant_spec_verison.empty?
-    gem 'vagrant-spec', :git => 'https://github.com/hashicorp/vagrant-spec', :ref => vagrant_spec_verison
+  vagrant_spec_version = ENV['VAGRANT_SPEC_VERSION']
+  if !vagrant_spec_version.nil? && !vagrant_spec_version.empty?
+    gem 'vagrant-spec', :git => 'https://github.com/hashicorp/vagrant-spec', :ref => vagrant_spec_version
   elsif vagrant_gem_version <= Gem::Version.new('2.2.7')
     gem 'vagrant-spec', :git => 'https://github.com/hashicorp/vagrant-spec', :ref => '161128f2216cee8edb7bcd30da18bd4dea86f98a'
   else
diff --git a/docs/configuration.markdown b/docs/configuration.markdown
index 9034897..2065604 100644
--- a/docs/configuration.markdown
+++ b/docs/configuration.markdown
@@ -82,7 +82,7 @@ end
   `disk_bus` is set to `scsi` or `disk_device` starts with `sd`, which is a hint
   to use scsi. Defaults to `virtio-scsi` when it encounters either of the
   config values for `disk_bus` or `disk_device`. See [libvirt controller models](
-  https://libvirt.org/formatdomain.html#controllers) for other posible values.
+  https://libvirt.org/formatdomain.html#controllers) for other possible values.
   NOTE: this option applies only to the disks associated with a box image.
 * `disk_device` - The disk device to emulate. Defaults to vda if not
   set, which should be fine for paravirtualized guests, but some fully
@@ -418,7 +418,7 @@ starts with `libvirt__` string. Here is a list of those options:
   only when dhcp is enabled.By default is the same host that runs the DHCP
   server.
 * `:libvirt__tftp_root` - Path to the root directory served via TFTP.
-* `:libvirt__adapter` - Number specifiyng sequence number of interface.
+* `:libvirt__adapter` - Number specifying sequence number of interface.
 * `:libvirt__forward_mode` - Specify one of `veryisolated`, `none`, `open`, `nat`
   or `route` options.  This option is used only when creating new network. Mode
   `none` will create isolated network without NATing or routing outside. You
@@ -472,7 +472,7 @@ starts with `libvirt__` string. Here is a list of those options:
 * `:libvirt__driver_name` - Define which network driver to use. [More
   info](https://libvirt.org/formatdomain.html#elementsDriverBackendOptions)
 * `:libvirt__driver_queues` - Define a number of queues to be used for network
-  interface. Set equal to numer of vCPUs for best performance. [More
+  interface. Set equal to number of vCPUs for best performance. [More
   info](http://www.linux-kvm.org/page/Multiqueue)
 * `:autostart` - Automatic startup of network by the Libvirt daemon.
   If not specified the default is 'false'.
@@ -549,7 +549,7 @@ the corresponding IP address.
 
 It is also possible to use the Qemu Agent to extract the management interface
 configuration from the booted virtual machine. This is helpful in libvirt
-environments where no local dnsmasq is used for automatic address assigment,
+environments where no local dnsmasq is used for automatic address assignment,
 but external dhcp services via bridged libvirt networks.
 
 Prerequisite is to enable the qemu agent channel via ([Libvirt communication
@@ -582,7 +582,7 @@ to setup a bridged host network manually and define it via
 You can create and attach additional disks to a VM via `libvirt.storage :file`.
 It has a number of options:
 
-* `path` - Location of the disk image. If unspecified, a path is automtically
+* `path` - Location of the disk image. If unspecified, a path is automatically
   chosen in the same storage pool as the VMs primary disk.
 * `device` - Name of the device node the disk image will have in the VM, e.g.
   *vdb*. If unspecified, the next available device is chosen.
@@ -705,7 +705,7 @@ Vagrant.configure("2") do |config|
   config.vm.provider :libvirt do |libvirt|
     libvirt.pci :domain => '0x0000', :bus => '0x06', :slot => '0x12', :function => '0x5'
 
-    # Add another one if it is neccessary
+    # Add another one if it is necessary
     libvirt.pci :domain => '0x0000', :bus => '0x03', :slot => '0x00', :function => '0x0'
   end
 end
@@ -808,7 +808,7 @@ Note that in order to enable USB redirection with Spice clients,
 you may need to also set `libvirt.graphics_type = "spice"`
 
 #### Filter for USB Redirector Devices
-You can define filter for redirected devices. These filters can be positiv or negative, by setting the mandatory option `allow=yes` or `allow=no`. All available options are listed below. Note the option `allow` is mandatory.
+You can define filter for redirected devices. These filters can be positive or negative, by setting the mandatory option `allow=yes` or `allow=no`. All available options are listed below. Note the option `allow` is mandatory.
 
 * `class` - The device class of the USB device. A list of device classes is available on [Wikipedia](https://en.wikipedia.org/wiki/USB#Device_classes).
 * `vendor` - The vendor of the USB device.
@@ -901,7 +901,7 @@ end
 ```
 
 ## Smartcard device
-A virtual smartcard device can be supplied to the guest via the `libvirt.smartcard` element. The option `mode` is mandatory and currently only value `passthrough` is supported. The value `spicevmc` for option `type` is default value and can be supressed. On using `type = tcp`, the options `source_mode`, `source_host` and `source_service` are mandatory.
+A virtual smartcard device can be supplied to the guest via the `libvirt.smartcard` element. The option `mode` is mandatory and currently only value `passthrough` is supported. The value `spicevmc` for option `type` is default value and can be suppressed. On using `type = tcp`, the options `source_mode`, `source_host` and `source_service` are mandatory.
 
 ```ruby
 Vagrant.configure("2") do |config|
diff --git a/docs/examples.markdown b/docs/examples.markdown
index b4091d2..0e24368 100644
--- a/docs/examples.markdown
+++ b/docs/examples.markdown
@@ -95,7 +95,7 @@ that due to a well known limitation only the TCP protocol is supported. For
 each `forwarded_port` directive you specify in your Vagrantfile,
 vagrant-libvirt will maintain an active ssh process for the lifetime of the VM.
 If your VM should happen to be rebooted, the SSH session will need to be
-restablished by halting the VM and bringing it back up.
+re-established by halting the VM and bringing it back up.
 
 vagrant-libvirt supports an additional `forwarded_port` option `gateway_ports`
 which defaults to `false`, but can be set to `true` if you want the forwarded
diff --git a/docs/installation.markdown b/docs/installation.markdown
index 8454d8d..4cce003 100644
--- a/docs/installation.markdown
+++ b/docs/installation.markdown
@@ -396,7 +396,7 @@ git checkout imports/c8s/libssh-0.9.4-1.el8
 into_srpm.sh -d c8s
 cd SRPMS
 
-# common commands (make sure to adjust verison accordingly)
+# common commands (make sure to adjust version accordingly)
 rpm2cpio libssh-0.9.4-1c8s.src.rpm | cpio -imdV
 tar xf libssh-0.9.4.tar.xz
 mkdir build
@@ -428,7 +428,7 @@ get_sources.sh
 into_srpm.sh -d c8s
 cd SRPMS
 
-# common commands (make sure to adjust verison accordingly)
+# common commands (make sure to adjust version accordingly)
 rpm2cpio krb5-1.18.2-8c8s.src.rpm | cpio -imdV
 tar xf krb5-1.18.2.tar.gz
 cd krb5-1.18.2/src
diff --git a/lib/vagrant-libvirt/action.rb b/lib/vagrant-libvirt/action.rb
index 1501fc9..c1232d0 100644
--- a/lib/vagrant-libvirt/action.rb
+++ b/lib/vagrant-libvirt/action.rb
@@ -162,7 +162,7 @@ module VagrantPlugins
                 # Start it..
                 b3.use StartDomain
 
-                # Machine should gain IP address when comming up,
+                # Machine should gain IP address when coming up,
                 # so wait for dhcp lease and store IP into machines data_dir.
                 b3.use WaitTillUp
                 require 'vagrant/action/builtin/wait_for_communicator'
diff --git a/lib/vagrant-libvirt/action/create_network_interfaces.rb b/lib/vagrant-libvirt/action/create_network_interfaces.rb
index b7e7eaf..d353363 100644
--- a/lib/vagrant-libvirt/action/create_network_interfaces.rb
+++ b/lib/vagrant-libvirt/action/create_network_interfaces.rb
@@ -41,7 +41,7 @@ module VagrantPlugins
           # Vagrant gives you adapter 0 by default
           # Assign interfaces to slots.
           configured_networks(env, @logger).each do |options|
-            # dont need to create interface for this type
+            # don't need to create interface for this type
             next if options[:iface_type] == :forwarded_port
 
             # TODO: fill first ifaces with adapter option specified.
diff --git a/lib/vagrant-libvirt/action/create_networks.rb b/lib/vagrant-libvirt/action/create_networks.rb
index 1421d27..dee4025 100644
--- a/lib/vagrant-libvirt/action/create_networks.rb
+++ b/lib/vagrant-libvirt/action/create_networks.rb
@@ -44,7 +44,7 @@ module VagrantPlugins
           end
 
           # only one vm at a time should try to set up networks
-          # otherwise they'll have inconsitent views of current state
+          # otherwise they'll have inconsistent views of current state
           # and conduct redundant operations that cause errors
           @@lock.synchronize do
             # Iterate over networks If some network is not
@@ -124,7 +124,7 @@ module VagrantPlugins
         # Throw an error if dhcp setting for an existing network does not
         # match what was configured in the vagrantfile
         # since we always enable dhcp for the management network
-        # this ensures we wont start a vm vagrant cant reach
+        # this ensures we won't start a vm vagrant can't reach
         # Allow the situation where DHCP is not requested (:libvirt__dhcp_enabled == false)
         # but where it is enabled on the virtual network
         def verify_dhcp
diff --git a/lib/vagrant-libvirt/action/destroy_networks.rb b/lib/vagrant-libvirt/action/destroy_networks.rb
index 77b2cf6..613670f 100644
--- a/lib/vagrant-libvirt/action/destroy_networks.rb
+++ b/lib/vagrant-libvirt/action/destroy_networks.rb
@@ -50,7 +50,7 @@ module VagrantPlugins
               if e.libvirt_code == ProviderLibvirt::Util::ErrorCodes::VIR_ERR_NO_NETWORK
                 @logger.info 'It is already undefined'
                 next
-              # some other error occured, so raise it again
+              # some other error occurred, so raise it again
               else
                 raise e
               end
diff --git a/lib/vagrant-libvirt/action/start_domain.rb b/lib/vagrant-libvirt/action/start_domain.rb
index dc89934..38cd405 100644
--- a/lib/vagrant-libvirt/action/start_domain.rb
+++ b/lib/vagrant-libvirt/action/start_domain.rb
@@ -64,7 +64,7 @@ module VagrantPlugins
                 disk_target.parent.delete_element("#{disk_target.parent.xpath}/address")
               end
 
-              # Iterface type
+              # Interface type
               unless config.nic_model_type.nil?
                 REXML::XPath.each(xml_descr, '/domain/devices/interface/model') do |iface_model|
                   if iface_model.attributes['type'] != config.nic_model_type
diff --git a/lib/vagrant-libvirt/config.rb b/lib/vagrant-libvirt/config.rb
index f825901..b244b20 100644
--- a/lib/vagrant-libvirt/config.rb
+++ b/lib/vagrant-libvirt/config.rb
@@ -11,7 +11,7 @@ module VagrantPlugins
   module ProviderLibvirt
     class Config < Vagrant.plugin('2', :config)
       # manually specify URI
-      # will supercede most other options if provided
+      # will supersede most other options if provided
       attr_accessor :uri
 
       # A hypervisor name to access via Libvirt.
@@ -1016,7 +1016,7 @@ module VagrantPlugins
         end
 
         if @qemu_use_agent == true
-          # if qemu agent is used to optain domain ip configuration, at least
+          # if qemu agent is used to obtain domain ip configuration, at least
           # one qemu channel has to be configured. As there are various options,
           # error out and leave configuration to the user
           unless machine.provider_config.channels.any? { |channel| channel[:target_name].start_with?("org.qemu.guest_agent") }
diff --git a/lib/vagrant-libvirt/driver.rb b/lib/vagrant-libvirt/driver.rb
index b2af683..72f0e59 100644
--- a/lib/vagrant-libvirt/driver.rb
+++ b/lib/vagrant-libvirt/driver.rb
@@ -239,7 +239,7 @@ module VagrantPlugins
 
             interface['ip-addresses'].each do |ip|
               # returning ipv6 addresses might break windows guests because
-              # winrm cant handle connection, winrm fails with "invalid uri"
+              # winrm can't handle connection, winrm fails with "invalid uri"
               next unless ip['ip-address-type'] == 'ipv4'
 
               ip_address = ip['ip-address']
diff --git a/lib/vagrant-libvirt/provider.rb b/lib/vagrant-libvirt/provider.rb
index 5a0bfdb..eadb0d1 100644
--- a/lib/vagrant-libvirt/provider.rb
+++ b/lib/vagrant-libvirt/provider.rb
@@ -52,7 +52,7 @@ module VagrantPlugins
         #  :username => "mitchellh",
         #  :private_key_path => "/path/to/my/key"
         # }
-        # note that modifing @machine.id or accessing @machine.state is not
+        # note that modifying @machine.id or accessing @machine.state is not
         # thread safe, so be careful to avoid these here as this method may
         # be called from other threads of execution.
         return nil if state.id != :running
diff --git a/locales/en.yml b/locales/en.yml
index c3d52ad..106f9eb 100644
--- a/locales/en.yml
+++ b/locales/en.yml
@@ -16,7 +16,7 @@ en:
       Created volume larger than box defaults, will require manual resizing of
       filesystems to utilize.
     box_version_missing: |-
-      No verison detected for %{name}, using timestamp to watch for modifications. Consider
+      No version detected for %{name}, using timestamp to watch for modifications. Consider
       generating a local metadata for the box with a version to allow better handling.
       See https://www.vagrantup.com/docs/boxes/format#box-metadata for further details.
     uploading_volume: |-
diff --git a/spec/unit/action/handle_box_image_spec.rb b/spec/unit/action/handle_box_image_spec.rb
index d427d46..d5115b0 100644
--- a/spec/unit/action/handle_box_image_spec.rb
+++ b/spec/unit/action/handle_box_image_spec.rb
@@ -104,7 +104,7 @@ describe VagrantPlugins::ProviderLibvirt::Action::HandleBoxImage do
 
         it 'should use the box file timestamp' do
           expect(ui).to receive(:warn).with(
-            "No verison detected for test, using timestamp to watch for modifications. Consider\n" +
+            "No version detected for test, using timestamp to watch for modifications. Consider\n" +
             "generating a local metadata for the box with a version to allow better handling.\n" +
             'See https://www.vagrantup.com/docs/boxes/format#box-metadata for further details.'
           )
@@ -134,7 +134,7 @@ describe VagrantPlugins::ProviderLibvirt::Action::HandleBoxImage do
         end
 
         it 'should use the box file timestamp' do
-          expect(ui).to receive(:warn).with(/No verison detected for test/)
+          expect(ui).to receive(:warn).with(/No version detected for test/)
 
           expect(subject.call(env)).to be_nil
           expect(env[:box_volume_number]).to eq(1)
diff --git a/spec/unit/driver_spec.rb b/spec/unit/driver_spec.rb
index 4bff163..a43db79 100644
--- a/spec/unit/driver_spec.rb
+++ b/spec/unit/driver_spec.rb
@@ -197,7 +197,7 @@ describe VagrantPlugins::ProviderLibvirt::Driver do
           allow(machine.provider_config).to receive(:qemu_use_session).and_return(true)
         end
 
-        it 'should retreive the address via the system dhcp-leases API' do
+        it 'should retrieve the address via the system dhcp-leases API' do
           expect(domain).to receive(:mac).and_return("52:54:00:8b:dc:5f")
           expect(subject).to receive(:system_connection).and_return(system_connection1)
           expect(system_connection1).to receive(:list_all_networks).and_return(networks)