#1351 - pre-proto - Adding well radius to fracture and fracture template. Well radius, perforation length and perforation efficiency for fracture is updated from fracture template if no local adjustments have been made. Units (meter -feet) is not yet handled.

ApplicationCode/ProjectDataModel/RimEllipseFractureTemplate.cpp

@@ -45,7 +45,6 @@ RimEllipseFractureTemplate::RimEllipseFractureTemplate(void)
     CAF_PDM_InitField(&halfLength,  "HalfLength",       650.0f,  "Halflength X<sub>f</sub>", "", "", "");
     CAF_PDM_InitField(&height,      "Height",           75.0f,   "Height", "", "", "");
     CAF_PDM_InitField(&width,       "Width",            1.0f,    "Width", "", "", "");
-    CAF_PDM_InitField(&perforationLength, "PerforationLength", 0.0f, "Perforation Length", "", "", ""); //Is this correct description?
 
     CAF_PDM_InitField(&permeability,"Permeability",     22000.f, "Permeability [mD]", "", "", "");
 }
@@ -65,7 +64,7 @@ void RimEllipseFractureTemplate::fieldChangedByUi(const caf::PdmFieldHandle* cha
 {
     RimFractureTemplate::fieldChangedByUi(changedField, oldValue, newValue);
 
-    if (changedField == &halfLength || changedField == &height || changedField == &perforationLength)
+    if (changedField == &halfLength || changedField == &height)
     {
         //Changes to one of these parameters should change all fractures with this fracture template attached. 
         RimProject* proj;
@@ -79,18 +78,9 @@ void RimEllipseFractureTemplate::fieldChangedByUi(const caf::PdmFieldHandle* cha
             for (RimFracture* fracture : fractures)
             {
                 if (fracture->attachedFractureDefinition() == this)
-                {
-                    if (changedField == &halfLength || changedField == &height)
                 {
                     fracture->setRecomputeGeometryFlag();
                 }
-
-                    if (changedField == &perforationLength && (abs(oldValue.toDouble() - fracture->perforationLength()) < 1e-5))
-                    {
-                        fracture->perforationLength = perforationLength;
-                    }
-
-                }
             }
 
             proj->createDisplayModelAndRedrawAllViews();
@@ -167,7 +157,7 @@ void RimEllipseFractureTemplate::changeUnits()
         halfLength = RimDefines::meterToFeet(halfLength);
         height = RimDefines::meterToFeet(height);
         width = RimDefines::meterToInch(width);
-        perforationLength = RimDefines::meterToFeet(perforationLength);
+        //perforationLength = RimDefines::meterToFeet(perforationLength);
         fractureTemplateUnit = RimDefines::UNITS_FIELD;
         //TODO: Darcy unit?
     }
@@ -176,7 +166,7 @@ void RimEllipseFractureTemplate::changeUnits()
         halfLength = RimDefines::feetToMeter(halfLength);
         height = RimDefines::feetToMeter(height);
         width = RimDefines::inchToMeter(width);
-        perforationLength = RimDefines::feetToMeter(perforationLength);
+        //perforationLength = RimDefines::feetToMeter(perforationLength);
         fractureTemplateUnit = RimDefines::UNITS_METRIC;
     }
 
@@ -195,14 +185,14 @@ void RimEllipseFractureTemplate::defineUiOrdering(QString uiConfigName, caf::Pdm
         halfLength.uiCapability()->setUiName("Halflenght X<sub>f</sub> [m]");
         height.uiCapability()->setUiName("Height [m]");
         width.uiCapability()->setUiName("Width [m]");
-        perforationLength.uiCapability()->setUiName("Perforation Length [m]");
+        //perforationLength.uiCapability()->setUiName("Perforation Length [m]");
     }
     else if (fractureTemplateUnit == RimDefines::UNITS_FIELD)
     {
         halfLength.uiCapability()->setUiName("Halflenght X<sub>f</sub> [Ft]");
         height.uiCapability()->setUiName("Height [Ft]");
         width.uiCapability()->setUiName("Width [inches]");
-        perforationLength.uiCapability()->setUiName("Perforation Length [Ft]");
+        //perforationLength.uiCapability()->setUiName("Perforation Length [Ft]");
     }
 
     
@@ -223,6 +213,8 @@ void RimEllipseFractureTemplate::defineUiOrdering(QString uiConfigName, caf::Pdm
     }
     propertyGroup->add(&skinFactor);
     propertyGroup->add(&perforationLength);
+    propertyGroup->add(&perforationEfficiency);
+    propertyGroup->add(&wellRadius);
 
     uiOrdering.add(&fractureTemplateUnit);
     uiOrdering.skipRemainingFields(true);

ApplicationCode/ProjectDataModel/RimEllipseFractureTemplate.h

@@ -46,7 +46,6 @@ public:
     
     caf::PdmField<float>     halfLength;
     caf::PdmField<float>     height;
-    caf::PdmField<float>     perforationLength;
 
     caf::PdmField<float>     width;
     caf::PdmField<float>     permeability;

ApplicationCode/ProjectDataModel/RimFracture.cpp

@@ -86,6 +86,7 @@ RimFracture::RimFracture(void)
     CAF_PDM_InitField(&perforationLength, "PerforationLength", 0.0, "Perforation Length", "", "", "");
     CAF_PDM_InitField(&perforationEfficiency, "perforationEfficiency", 1.0, "perforation Efficiency", "", "", "");
     perforationEfficiency.uiCapability()->setUiEditorTypeName(caf::PdmUiDoubleSliderEditor::uiEditorTypeName());
+    CAF_PDM_InitField(&wellRadius, "wellRadius", 0.0, "Well Radius at Fracture", "", "", "");
     CAF_PDM_InitField(&dip, "Dip", 0.0, "Dip", "", "", "");
     CAF_PDM_InitField(&tilt, "Tilt", 0.0, "Tilt", "", "", "");
     CAF_PDM_InitField(&showPolygonFractureOutline, "showPolygonFractureOutline", true, "Show Polygon Outline", "", "", "");

ApplicationCode/ProjectDataModel/RimFracture.h

@@ -56,6 +56,7 @@ public:
     caf::PdmField<double>           azimuth;
     caf::PdmField<double>           perforationLength;
     caf::PdmField<double>           perforationEfficiency;
+    caf::PdmField<double>           wellRadius;
 
     caf::PdmField<double>           dip;
     caf::PdmField<double>           tilt;

ApplicationCode/ProjectDataModel/RimFractureTemplate.cpp

@@ -24,6 +24,7 @@
 #include "RimProject.h"
 
 #include "cafPdmObject.h"
+#include "cafPdmUiDoubleSliderEditor.h"
 
 #include "cvfVector3.h"
 
@@ -67,11 +68,15 @@ RimFractureTemplate::RimFractureTemplate(void)
     CAF_PDM_InitField(&fractureTemplateUnit, "fractureTemplateUnit", caf::AppEnum<RimDefines::UnitSystem>(RimDefines::UNITS_METRIC), "Units System", "", "", "");
     fractureTemplateUnit.uiCapability()->setUiReadOnly(true);
 
-
     CAF_PDM_InitField(&orientation, "Orientation",      caf::AppEnum<FracOrientationEnum>(TRANSVERSE_WELL_PATH), "Fracture Orientation", "", "", "");
     CAF_PDM_InitField(&azimuthAngle, "AzimuthAngle",    0.0f, "Azimuth Angle", "", "", ""); //Is this correct description?
     CAF_PDM_InitField(&skinFactor, "SkinFactor", 1.0f, "Skin Factor", "", "", "");
 
+    CAF_PDM_InitField(&perforationLength, "PerforationLength", 0.0, "Perforation Length", "", "", "");
+    CAF_PDM_InitField(&perforationEfficiency, "perforationEfficiency", 1.0, "perforation Efficiency", "", "", "");
+    perforationEfficiency.uiCapability()->setUiEditorTypeName(caf::PdmUiDoubleSliderEditor::uiEditorTypeName());
+    CAF_PDM_InitField(&wellRadius, "wellRadius", 0.0, "Well Radius at Fracture", "", "", "");
+
     CAF_PDM_InitField(&fractureConductivity, "FractureCondictivity", caf::AppEnum<FracConductivityEnum>(INFINITE_CONDUCTIVITY), "Conductivity in Fracture", "", "", "");
 
 }
@@ -130,8 +135,35 @@ void RimFractureTemplate::fieldChangedByUi(const caf::PdmFieldHandle* changedFie
             proj->createDisplayModelAndRedrawAllViews();
         }
     }
-}
 
+    if (changedField == &perforationLength || changedField == &perforationEfficiency || changedField == &wellRadius)
+    {
+        RimProject* proj;
+        this->firstAncestorOrThisOfType(proj);
+        if (!proj) return;
+        std::vector<RimFracture*> fractures;
+        proj->descendantsIncludingThisOfType(fractures);
+
+        for (RimFracture* fracture : fractures)
+        {
+            if (fracture->attachedFractureDefinition() == this)
+            {
+                if (changedField == &perforationLength && (abs(oldValue.toDouble() - fracture->perforationLength()) < 1e-5))
+                {
+                    fracture->perforationLength = perforationLength;
+                }
+                if (changedField == &perforationEfficiency && (abs(oldValue.toDouble() - fracture->perforationEfficiency()) < 1e-5))
+                {
+                    fracture->perforationEfficiency = perforationEfficiency;
+                }
+                if (changedField == &wellRadius && (abs(oldValue.toDouble() - fracture->wellRadius()) < 1e-5))
+                {
+                    fracture->wellRadius = wellRadius;
+                }
+            }
+        }
+    }
+}
 
 //--------------------------------------------------------------------------------------------------
 /// 
@@ -149,3 +181,19 @@ void RimFractureTemplate::defineUiOrdering(QString uiConfigName, caf::PdmUiOrder
         azimuthAngle.uiCapability()->setUiHidden(false);
     }
 }
+
+//--------------------------------------------------------------------------------------------------
+/// 
+//--------------------------------------------------------------------------------------------------
+void RimFractureTemplate::defineEditorAttribute(const caf::PdmFieldHandle* field, QString uiConfigName, caf::PdmUiEditorAttribute* attribute)
+{
+    if (field == &perforationEfficiency)
+    {
+        caf::PdmUiDoubleSliderEditorAttribute* myAttr = dynamic_cast<caf::PdmUiDoubleSliderEditorAttribute*>(attribute);
+        if (myAttr)
+        {
+            myAttr->m_minimum = 0;
+            myAttr->m_maximum = 1.0;
+        }
+    }
+}

ApplicationCode/ProjectDataModel/RimFractureTemplate.h

@@ -49,6 +49,10 @@ public:
     caf::PdmField<float>     azimuthAngle;
     caf::PdmField<float>     skinFactor;
 
+    caf::PdmField<double>           perforationLength;
+    caf::PdmField<double>           perforationEfficiency;
+    caf::PdmField<double>           wellRadius;
+
     enum FracOrientationEnum
     {
         AZIMUTH,
@@ -73,4 +77,7 @@ public:
     virtual std::vector<cvf::Vec3f> fracturePolygon(caf::AppEnum< RimDefines::UnitSystem > fractureTemplateUnit) = 0;
 protected:
     virtual void                    defineUiOrdering(QString uiConfigName, caf::PdmUiOrdering& uiOrdering);
+
+    virtual void                    defineEditorAttribute(const caf::PdmFieldHandle* field, QString uiConfigName, caf::PdmUiEditorAttribute* attribute) override;
+
 };

ApplicationCode/ProjectDataModel/RimSimWellFracture.cpp

@@ -191,6 +191,7 @@ void RimSimWellFracture::defineUiOrdering(QString uiConfigName, caf::PdmUiOrderi
     propertyGroup->add(&stimPlanTimeIndexToPlot);
     propertyGroup->add(&perforationLength);
     propertyGroup->add(&perforationEfficiency);
+    propertyGroup->add(&wellRadius);
 
     caf::PdmUiGroup* fractureCenterGroup = uiOrdering.addNewGroup("Fracture Center Info");
     fractureCenterGroup->add(&m_uiAnchorPosition);

ApplicationCode/ProjectDataModel/RimStimPlanFractureTemplate.cpp

@@ -1081,6 +1081,9 @@ void RimStimPlanFractureTemplate::defineUiOrdering(QString uiConfigName, caf::Pd
     caf::PdmUiGroup* propertyGroup = uiOrdering.addNewGroup("Properties");
     propertyGroup->add(&fractureConductivity);
     propertyGroup->add(&skinFactor);
+    propertyGroup->add(&perforationLength);
+    propertyGroup->add(&perforationEfficiency);
+    propertyGroup->add(&wellRadius);
 
     caf::PdmUiGroup* polygonGroup = uiOrdering.addNewGroup("Fracture Polygon Basis");
     polygonGroup->add(&parameterForPolygon);
@@ -1091,6 +1094,8 @@ void RimStimPlanFractureTemplate::defineUiOrdering(QString uiConfigName, caf::Pd
 //--------------------------------------------------------------------------------------------------
 void RimStimPlanFractureTemplate::defineEditorAttribute(const caf::PdmFieldHandle* field, QString uiConfigName, caf::PdmUiEditorAttribute * attribute)
 {
+    RimFractureTemplate::defineEditorAttribute(field, uiConfigName, attribute);
+
     if (field == &m_stimPlanFileName)
     {
         caf::PdmUiFilePathEditorAttribute* myAttr = dynamic_cast<caf::PdmUiFilePathEditorAttribute*>(attribute);

ApplicationCode/ProjectDataModel/RimWellPathFracture.cpp

@@ -174,6 +174,7 @@ void RimWellPathFracture::defineUiOrdering(QString uiConfigName, caf::PdmUiOrder
     propertyGroup->add(&stimPlanTimeIndexToPlot);
     propertyGroup->add(&perforationLength);
     propertyGroup->add(&perforationEfficiency);
+    propertyGroup->add(&wellRadius);
 
     caf::PdmUiGroup* fractureCenterGroup = uiOrdering.addNewGroup("Fracture Center Info");
     fractureCenterGroup->add(&m_uiAnchorPosition);