For nested hybrid grids, IJK range filters (I/J/K slices and IJK filters)
now refer exclusively to the original (coarse) grid IJK. Nested-grid local
IJK values are no longer offered, and every cell, including cells in all
refinement levels, is mapped to the original IJK of its top-most parent.
- Add RigNestedHybridGridLayout describing how original cells are embedded
in the flat grid, shared by the LGR reconstruction and the IJK mapping
- RigMainGrid: store the layout and compute the original IJK of any cell on
demand by following the parent cell chain, without per-cell storage
- Range filter UI: slider limits, clamping, defaults and active cell range
use the original grid dimensions; grid selection is hidden
- Evaluate range filters on all grids using the original IJK in the 3D view,
combined filters and data filters
- 3D view context menu slices use the original IJK of the picked cell
- Add unit tests for the layout, the IJK mapping against OLDIJK, and slice
filtering across refinement levels
Migrate all assert macros in ApplicationLibCode to CAF_ASSERT and remove every
use of cvfAssert.h.
CVF_ASSERT is replaced one to one. CVF_TIGHT_ASSERT is also replaced by
CAF_ASSERT, which is semantically exact: CVF_ENABLE_TIGHT_ASSERTS is 1 only
under _DEBUG, and that is what CAF_ASSERT now does. The two CVF_FAIL_MSG sites
become CAF_ASSERT( false && "message" ), preserving the message with the idiom
already used elsewhere in the code base.
Counts before and after: CVF_ASSERT 1044 to 0, CVF_TIGHT_ASSERT 66 to 0,
CVF_FAIL_MSG 2 to 0, cvfAssert.h references 154 to 0.
Include handling: files that included cvfAssert.h directly now include
cafAssert.h instead, includes left dead by the migration are removed, and files
that were relying on cvfAssert.h transitively get an explicit cafAssert.h. Files
that reach cafAssert.h through another caf header are left unchanged; a missing
include here is a compile error, not a silently disabled assert.
ResultStatisticsCache links only LibCore and therefore had no path to
cafAssert.h. Add the cafPdmCore directory as a private include path rather than
linking the library, since cafAssert.h is header only.
Note that this stops these asserts from firing in Release and RelWithDebInfo,
where CVF_ASSERT was previously active.
A new "Show Cumulative Curve" checkbox on the grid statistics data source adds a cumulative curve on the right axis, in addition to the regular histogram curve. The cumulative curve shares the data source of its non-cumulative counterpart and follows all changes to it. The cumulative sum works with all frequency types and both graph types.
Remove the legacy Grid Statistics dialog (RicGridStatisticsDialog) and its context menu command, which provided the previous cumulative display.
* #14226 Add intersection along i/j/k axis
Add a new persistent intersection type that follows the grid pillars at a
fixed i, j or k index. Unlike the axis-aligned intersection box, the surface
is built from the grid cell faces and therefore steps along faults and curved
pillars, which is useful for structural restoration analysis.
The user selects the axis, the fixed index, the two perpendicular index
ranges and which cell face (front/back pillar) to use. The geometry generator
emits the chosen cell face of every cell in the index plane directly from the
native pillar corners, so cell result colors map exactly.
The feature is available from the Intersections context menu for Eclipse
views and supports 3D-view picking and cell result readout.
The grid statistics plot and show commands were only added to the context menu when the cursor was inside the overlay info box, so right-clicking on the grid geometry no longer offered them. Always add the create and show commands, and keep only the copy-to-clipboard command gated by the info box position.
findCellAndGridIndex and ijkFromCellIndex shared the same latent
null-pointer pattern as the context menu crash: the outer case/view was
null-checked, but a sub-accessor that can also return nullptr was
dereferenced without a guard. These are reachable from the same pick and
context-menu flow when a case is still loading, in a comparison view, or
being torn down.
- findCellAndGridIndex: guard mainGrid() and geoMechData()
- ijkFromCellIndex: guard eclipseCaseData() (matching isRadialGrid) and
femParts()
RiuViewerCommands::displayContextMenu called
eclipseView->mainGrid()->findFaultFromCellIndexAndCellFace() without
checking the result of mainGrid(). When the view's case or case data is
not available, mainGrid() returns nullptr, and the call dereferenced the
null pointer inside findFaultFromCellIndexAndCellFace (caught in the
stack trace as cvf::ref<RigFaultsPrCellAccumulator>::isNull).
Guard the call with a null check on mainGrid(), matching the existing
pattern used elsewhere in this file.
Skip pick items with no cvf source info in both pick paths
(displayContextMenu and findFirstItems). Without this, the refinement
region wireframe — which has no source info — became the topmost hit,
causing the picking handler to bail out and leaving Result Info empty
instead of falling through to the underlying cell.
Two new actions added to the well path context menu:
- "Hide All Geometry (Show Wells)": hides grid cells, faults, and intersections,
then forces simulation wells and well paths visible.
- "Show All Geometry": restores grid cells, faults, and intersections visibility.
Added RimIntersectionCollection::setActive() for direct state control.
Enhance slice feature constructors and UI logic to support context-aware labeling for both Cartesian and radial grids. Axis and slice labels now clearly indicate both physical and index names (e.g., "Radial (I)", "Theta (J)"). Context menus and filter UIs display the appropriate labels based on grid type, improving clarity and usability.
Introduce support for rendering MSW (Multi-Stage Well) segments in well path visualizations, including alternating color cylinders and boundary markers. Integrate MSW segment display into both regular and flattened geometry builders. Add picking support in the viewer: when an MSW segment is selected, display its properties (segment number, branch, MD range, diameter) and select it in the UI. Also, increase perforation visualization radius for improved clarity.
* Add sector model export wizard
* GUI cleanup
* Use job name as deck name for simulation runs
* Remove new things from old export GUI
* Use radio-buttons for enum dropdowns
Improves result info handling by ensuring the result
definition is valid before accessing it, preventing
potential crashes.
Uses `if (auto)` to check for null result definitions,
and displays a user-friendly message when no result
definition is available.
Selection of the cell result in the 3D view causes changes in active view and is very confusing for the user. Use "Activate Result in Project Tree" from right-click menu in the intersection view.
* Add polygon reader for POL file format
* Add CSV import
* Add helper function to create tag with color and text
* Show polygon color as tag, allow color edit by clicking on tag
* Support optional header in csv file
* Add Reload on polygon file
* Show warning icon if no polygons
* Improve logging text
* Do not show file polygon in view if no polygons are imported
* Use appendMenuItems
* Set default polygon color to orange
* Enter edit state when creating a new polygon
* Fix missing UI text in menu builder
* Add notification of parent object when multiple objects are updated
* Make sure unchecked curves are removed from track
* Use object names instead of "Sub Items" when possible
* Set default simulation well visualization to top of reservoir
* Show plot window after plot is created
* Allow setting plot rendering flags
* Add more plots for update when clicking in 3D view
* Seismic Difference: Fix typo for poly line data extraction
* Version RC_5
* Improve toggling of checked state of sub items
Toggling state is only supported for objects in an array. For example, this will ensure that faults are toggled without altering the fault result object.
* Use gray instead of black for icons
* #9719 Use delete instead of deleteLater to avoid visual artifacts
Artifacts are seen in the Property Editor related to obsolete group boxes. This seems to be related to deleteLater().
* Improve text in menu when toggling sub items
* #10011 Make sure all grid cases are visible in RFT data source
* #10354 Show more info when hovering on curves in summary plot
* #10355 Copy model text info in 3D view to clipboard
* Make sure cell filter option is propagated to new field
Make sure the previous value of m_showFaultsOutsideFilters_obsolete is propagated into m_applyCellFilters
* Fix wrong spelling when using of stylesheet color
* Refactor interface to PdmObjectHandle and PdmFieldHandle
Return objects instead of passing in structures as parameters
* Add nodiscard to several functions
* Remove redundant this->
* Rename to ptrReferencedObjectsByType
* Major refactor from RimGridView to Rim3dView
* Move view linker/controller functions to Rim3dView
* Add bitmask to define the content of a 3D view
* Link views based on matching content
* Enable bit mask operators at global scope
* Make it possible to use 2d intersection views as comparison views
* Fix crash when a view used as comparison view is deleted
* Move unlinking to Rim3dView
* Add options to snapshot only 3D views/plots as part of regression testing
* WBS plot: Improve default name, hide axis for some tracks
* Place copy of contour map in correct collection
* Allow linking of contour maps
* Improve handling of contour views and 3D views
* Guard nullptr
* Guard assert seen on Linux
* Zoom all on contour map when unlinked to reset zoom
If a contour map is linked to a 3D view, the view can get distorted. Call ZoomAll to reset to sensible defaults.
* Remove default rainbow legend
Kristian Bendiksen
Magne Sjaastad
JJ
jonjenssen
Jørgen Herje