WA_DeleteOnClose left RiuMainWindow::instance() and RiuPlotMainWindow::instance() null after the user closed a window, so any unguarded use crashed. Keep both windows alive for the application lifetime and rebuild their views when a closed window is shown again.
Fixes#14899.
Sumo data is loaded so the application stays responsive while it waits.
Run Sumo transfers on a dedicated thread
Split RiaSumoConnector into transport and data delegates
Load Sumo summary vectors concurrently and without waiting
Show that Sumo data is being loaded
Migrate all assert macros in ApplicationLibCode to CAF_ASSERT and remove every
use of cvfAssert.h.
CVF_ASSERT is replaced one to one. CVF_TIGHT_ASSERT is also replaced by
CAF_ASSERT, which is semantically exact: CVF_ENABLE_TIGHT_ASSERTS is 1 only
under _DEBUG, and that is what CAF_ASSERT now does. The two CVF_FAIL_MSG sites
become CAF_ASSERT( false && "message" ), preserving the message with the idiom
already used elsewhere in the code base.
Counts before and after: CVF_ASSERT 1044 to 0, CVF_TIGHT_ASSERT 66 to 0,
CVF_FAIL_MSG 2 to 0, cvfAssert.h references 154 to 0.
Include handling: files that included cvfAssert.h directly now include
cafAssert.h instead, includes left dead by the migration are removed, and files
that were relying on cvfAssert.h transitively get an explicit cafAssert.h. Files
that reach cafAssert.h through another caf header are left unchanged; a missing
include here is a compile error, not a silently disabled assert.
ResultStatisticsCache links only LibCore and therefore had no path to
cafAssert.h. Add the cafPdmCore directory as a private include path rather than
linking the library, since cafAssert.h is header only.
Note that this stops these asserts from firing in Release and RelWithDebInfo,
where CVF_ASSERT was previously active.
* Make sure we don't trigger another select when a view in the project tree is selected.
* Fix for #14255 and related issues
* Make sure we can close and open a main window, keeping the layout when reopened.
Select the summary plot as the current item before any menu commands are
created, so every command in the context menu operates on that plot. This is
the root fix for plot-level commands (New Analysis Plot, correlation plots,
etc.) that derive their enablement from the selected plot: previously the
selection could be left on an ensemble realization's summary case, disabling
them.
Because the plot is now selected, the Show Plot Data / Edit Plot / Split / Delete
commands resolve the plot from the selection, so passing it as user data is no
longer needed. The RicShowPlotDataCtxFeature and RicEditSummaryPlotCtxFeature
subclasses existed only to force isCommandEnabled to true for the context menu;
they are now obsolete and removed, and the menu uses the base RicShowPlotData
and RicEditSummaryPlot features directly.
Also highlight the curve under the cursor before showing the menu, giving the
same visual feedback as a left-click. Separate highlighting from selection:
extract the visual-only part of selectClosestPlotItem into
applyHighlightForClosestItem, shared by selectClosestPlotItem (left-click:
highlight + select) and the new highlightClosestPlotItem (highlight only). The
context menu uses the highlight-only path, so it does not change the selection.
Add highlightClosestPlotItemAtPosition that takes widget coordinates and
converts them to canvas coordinates internally, so the caller does not depend
on qwt headers.
* CMake: Remove dead CODE_HEADER_FILES variable
* CMake: Remove dead COMMAND_CODE_HEADER_FILES and COMMAND_MOC_SOURCE_FILES
* CMake: Remove dead MOC_SOURCE_FILES and FORM_FILES_CPP references
* CMake: Remove dead HEADER_FILES reference
* CMake: Delete unused CustomPCH.cmake superseded by target_precompile_headers
Move the QMessageBox-displaying helper out of the logging utility into a
dedicated UI class. RiaLogging.h no longer pulls QMessageBox/QWidget into
the ~270 files that include it. Behavior is preserved: showError displays
the dialog when running interactively (and not under regression tests),
then forwards the text to RiaLogging::error.
* Fix defensive guards and TVD interpolation
Guard against out-of-bounds IJK and invalid cells in RifReaderRftInterface.
Guard against null eclCase in RimDataSourceForRftPlt::address.
Guard against null plot widgets in RiuMultiPlotPage.
Fix interpolateMdFromTvd corrupting valid entries after infinity TVD values
by skipping infinity entries in the first pass and tracking only the last
two valid MD values for the startMD adjustment.
* Add RiuQwtCurveSelectorFilter for click-to-select realization in Qwt plots
New shared event filter class that installs on a QwtPlot canvas and calls a
user-supplied callback with the closest data point on each click.
Migrate the local CurveSelectorFilter in RimParameterResultCrossPlot to use
the new shared class. Add Z_HIGHLIGHTED_CURVE to ZIndex enum and replace all
raw z-order integers in RiuQwtPlotCurveDefines with named constants.
* Add RFT correlation report plot with cross-plot and tornado plot
New classes:
- RimRftCorrelationReportPlot: composite plot showing an RFT well log track
alongside a parameter cross-plot and a tornado plot sub-plot.
- RimParameterRftCrossPlot: cross-plot of ensemble parameters vs RFT-derived
measured depth values, with click-to-select realization support.
- RimRftTornadoPlot: tornado plot with correlation-sorted parameter list and
click-to-select realization support.
- RicCreateRftCorrelationReportFeature: context menu command on RimWellRftPlot
that creates a RimRftCorrelationReportPlot in the correlation plot collection.
Wire up in RimCorrelationPlotCollection and RimContextCommandBuilder.
* Add click-to-select and highlight selected realization in RFT plots
Install RiuQwtCurveSelectorFilter on RimWellRftPlot canvas to support
click-to-select realization. Highlight the selected realization using a
contrast color (orange-red) and increased line thickness. React to both
click-to-select in the plot and selection changes in the Data Sources panel.
Add Z_HIGHLIGHTED_CURVE z-order and replace raw z-order integers with
named constants in RimWellRftPlot.
Highlight selected realization with XCROSS symbol in RimParameterRftCrossPlot
via RimSummaryEnsembleTools::findSummaryCase.
* RimWellRftPlot: add Create RFT Correlation Report to canvas right-click menu
Override appendMenuItems in RimWellRftPlot to add RicCreateRftCorrelationReportFeature.
Call appendMenuItems from RiuMultiPlotPage::contextMenuEvent so any plot type
can contribute canvas menu items without modifying RiuMultiPlotPage.
* RicShowPlotDataFeature: support RimRftCorrelationReportPlot
Add RimRftCorrelationReportPlot to the isCommandEnabled check and expand
it into its cross-plot and tornado sub-plots in onActionTriggered, matching
the pattern used for RimCorrelationReportPlot.
Remove lastUsedProjectFileName from RiaPreferences and store it via the
existing recentFileList QSettings key. loadProject and saveProjectAs now
call addToRecentFiles instead of writing to preferences. A new static
method lastUsedProjectFileName() on RiuRecentFileActionProvider returns
the most recent .rsp entry from the list.
Adds a new menu item "What's New" to the Help menu that opens the
release notes page at https://resinsight.org/releases/release-notes/latest/.
Includes a new star-shaped SVG icon matching the existing help icon style.
Consolidate all urls into constants in RiaNetworkTools
* Add view job log command.
* Add stop job command.
* Do not block ui while job is running.
* Show progress while job is running
* Make sure user gets notified of running jobs when exiting ResInsight or closing current project.
Required changes to use Qt6 and disable support for Qt5. There are still some adjustments related to Qt6 to be done, but these changes are not required to make Qt6 compile on relevant systems.
* Build system changes Qt6
* Override enterEvent
* Update QKeySequence
* QtChart changes
* Use QScreen to instepct dotsPerInch
* Add app->quit()
* Required updates for code related to QString
* Use RiaQDateTimeTools
* Required changes related to regular expressions
* Support compile on Qt < 6.5
When version < 6.5 is found, qt_generate_deploy_app_script() is disabled. Compilation of ResInsight will work, but the install target will be incomplete.
* Octave: add missing header.
* Qt Advanced Docking: force Qt6 where both Qt5 and Qt6 is available.
---------
Co-authored-by: magnesj <1793152+magnesj@users.noreply.github.com>
Co-authored-by: Kristian Bendiksen <kristian.bendiksen@gmail.com>
Make sure a regression curve based on observed data can be resampled. Split display of curves, one section for resampled curves and one section for observed curves without resampling.
- support selection of multiple values for multiple producer variables
- use one color for curves in a curve set representing a VFP curve collection
- use symbols to indicate individual family values for curves
- show all required values to identify curves as curve legend text and curve mouse hover text
- make sure all available settings of axis property object is applied to the plot axis
- support display of all curve data using "Show Plot Data"
This PR will reduce the compile time of code using AppEnum.
* AppEnum: Move QTextStream operator to avoid include of QTextStream
* Avoid use of iostream in cafAssert
rator to avoid include of QTextStream
Include file profiling shows that include of QTextStream is a performance issue. Create a non-templated base class for AppEnum. Implement the QTextStream operator for this interface.
Clean up cmake configuration a bit, and pull down gtest when needed, no longer use a thirdparty subfolder
Add a ResInsight-tests target to run the unit tests
* Add plotContentAsText() to bar chart builder
* Add show plot data to analysis plot
* Refactor analysis plot
* Enable context menu in Analysis Plot
* Add show plot data for general RimPlots
* Show plot data for correlation report in three separate text dialogs
* #10285 Grid Cross Plot: Fix group highlighting
* #9329 Make Show plot data more robust
* Do not show the curve color tag for grid cross plot curves
* #10310 Add tab to show plot data for well log curves
* Refactor interface to PdmObjectHandle and PdmFieldHandle
Return objects instead of passing in structures as parameters
* Add nodiscard to several functions
* Remove redundant this->
* Rename to ptrReferencedObjectsByType
Magne Sjaastad
JJ
Jørgen Herje
Jon Jenssen
Kristian Bendiksen
magnesj