Clean up cmake configuration a bit, and pull down gtest when needed, no longer use a thirdparty subfolder
Add a ResInsight-tests target to run the unit tests
The performance to compute geometry BB for active cells has improved. The original code also set displayModelOffset based on the BB of active cells. To make sure that existing project files produce identically the the same, the non-optimized version is used in this case.
- read geometry definition from h5grid files
- import cell results from h5grid files
- create and import case using drag/drop of h5grid file into ResInsight
Use correct result name for Void ratio
Enable porosity calculator for imported inp data
Add model validation check for export/show model
Fix last res. layer not being splitted into subelements
Add model validation check in file exporter
Bump version to dev.04
Support reading element type results
Automatically load properties from INP include files generated by Fault Reactivation Model exporter
Some refactoring of element and result types.
* Make it possible to use designated initializer list
- remove default constructor
- move static member to outer scope
* Add helper function to add field on same row
- add data source selection, either Case Property or Grid Calculation
- add Time Step Selection, can be used for both dynamic case properties and Grid Calculations
- optionally release grid calculation data when statistics is computed
- recursive grid calculations is supported
After merging the cross plot with the summary plot, the sources stepping can be simplified. Remove obsolete sources stepping code, to prepare for other source stepping issues.
The plots are duplicated, and the axis objects are referenced using ptrField. Make sure resolveReferencesRecursively() is called after the plot is inserted into the project tree.
Use a list of predefined colors, and select the color with the larges RGB difference to the source curve. This will ensure that we avoid ending up with fully white or fully black curves, unable to see.
* Add plotContentAsText() to bar chart builder
* Add show plot data to analysis plot
* Refactor analysis plot
* Enable context menu in Analysis Plot
* Add show plot data for general RimPlots
* Show plot data for correlation report in three separate text dialogs
* 10675 Fix missing intersection line geometry
* Change to list of visible surface intersection lines
* Enable surface intersection band for any intersection
* Show labels for intersection curves in 3D
The polylines are defined in the display coordinate system without Z-scaling. The z-scaling is applied to the visualization parts using Part::setTransform(Transform* transform)
The annotation objects are defined by display coordinates, so apply the Z-scaling to the coordinates.
* Improve naming of surfaces
* Use scaling factor of 1.0 for flat intersection views
* Make sure clang-tidy action use .clang-tidy config file
Use add-paths to instruct create-pull-request to a sub folder to avoid diff from Qt and vcpkg
* Use empty() in macro to avoid clang-tidy warning
* Add NOLINT to CAF_ASSERT
* Add NOLINT to cvfAssert
* Add statistics enum
* Support ensemble statistics curve as data source for regression curves
* Allow creation of regression curves from statistics curves
* Make sure regression curves are updated after source curves
* Add state to use full or user defined range for regression source data
* Add isRegressionCurve
* Make sure source stepping works when regression curves are present
* Support cross plot in plot templates
* Fix source stepping for cross plots
* Show cross plot data in "Show Plot Data"
* Use bin size and realization count when computing cross plot statistics
* Support getting pore pressure for all nodes
* Misc fixes and updates in fault reactivation UI
* Disable fault reactivation result unless you load an odb from a valid working folder
Update result to generate well paths based on information from model generator. Store settings in JSON file.
Add method to access local coordinate system definition
* Add timestep selection
* Add import geomech model to context menu
* Add command for running fault reactivation
* Change order of nodes for exported elements
* Add command to quickly show model in 3D view
Add model thickness parameter.
Add support for reloading INP files from recent files
Add working directory field to fault reactivation model and put INP export there.
* Compute average MD for intersections with a cell
* Create extractor for simulation well
* Remove rftReader from RifDataSourceForRftPlt
* Add function compute measured depth for RFT cells based on well path geometry
* Move statistics reader to well ensemble curve set
* Make sure both TVD and MD are cached if possible
* Add selection of grid case to use for estimation of measured depth (MD)
Add "Grid Model For MD" where the user can select a grid model. This grid model is propagated to a hidden field in EnsembleCurveSet. The grid model is then applied to RifReaderEnsembleStatisticsRft owned by EnsembleCurveSet
* Use one common variable for object name, use three ints
* Move enums to separate file
* Refactor use of enums
* Move implementation to cpp
* Refactor includes
When launching a script, the main window must be created. It is the Process Monitor that received info from the process and passes the text to process monitor and Message Panel.
* Add notification of parent object when multiple objects are updated
* Make sure unchecked curves are removed from track
* Use object names instead of "Sub Items" when possible
* Set default simulation well visualization to top of reservoir
* Show plot window after plot is created
* Allow setting plot rendering flags
* Add more plots for update when clicking in 3D view
* Seismic Difference: Fix typo for poly line data extraction
* Version RC_5
* Update icons for summary and ensemble templates
* Icons for regression and decline
* #10374 LineEditor: Hide the placeholder widget when not used
* #10376 Assign a case ID to delta summary case
* Do not show decline range text in plot
* Improve toggling of checked state of sub items
Toggling state is only supported for objects in an array. For example, this will ensure that faults are toggled without altering the fault result object.
* Use gray instead of black for icons
* #9719 Use delete instead of deleteLater to avoid visual artifacts
Artifacts are seen in the Property Editor related to obsolete group boxes. This seems to be related to deleteLater().
* Improve text in menu when toggling sub items
* #10011 Make sure all grid cases are visible in RFT data source
* #10354 Show more info when hovering on curves in summary plot
* #10355 Copy model text info in 3D view to clipboard
* Make sure cell filter option is propagated to new field
Make sure the previous value of m_showFaultsOutsideFilters_obsolete is propagated into m_applyCellFilters
* Fix wrong spelling when using of stylesheet color
* Enable cell filters
* Enable property filters
* Clean up fault collection interface and use similar setting for controlling filters as in intersection collection
* Enable cell/property filters on geomech intersections
* Enable cell and property filters for box intersections
* Remove light mode from theme selection
The light mode is not working well, and was intended to be used when exporting to pdf from dark mode.
* Allow direct edit of summary case name
The name for a summary case can be automatically created. If the user starts to edit the name manually, set the name option to Custom. Make the descriptionField available as not read-only, then it is possible to edit the name directly in the project tree using F2 or double-click.
* Allow drag of ensembles
* Add support for drag/drop of well segments
* Add support for well segment number stepping in toolbar
* Rename from DiffCurve to CalculatedCurve and add operators selection
* Add option to select depth source for resampling in CalculatedCurve
- Select source for depth values for resampling
- Depths from first curve, second curve or union of these
- Added unit tests for function creating union depth values and calculate value with selected operator.
* Guard divide by zero
* Adjust algorithm for union of depths
- Prevent duplicated depth values (no need for enter/exist of k-layer when resampling)
- Add threshold for depth distance
- Update unit tests
* #10285 Grid Cross Plot: Fix group highlighting
* #9329 Make Show plot data more robust
* Do not show the curve color tag for grid cross plot curves
* #10310 Add tab to show plot data for well log curves
* Improve tree selection editor
- always call defineEditorAttributes
- use heightHint in editor attributes
- use tree selection editor as default editor for std::vector
* Use tree selection editor instead of list selection editor
List selection editor must be used when editing std::vector<cvf::vec3d> and similar. Replace other use of list selection editor with tree selection editor.
* Set checked state based on text string for integer only models
For models with only integer values, use text string to define the items to be selected. The full list will always be visible, and the checked state will be updated when editing the filter text.
Example: "1, 5-7" will set items 1, 5, 6, 7 checked and all other items unchecked
* Minor fixes
- Set placeholder text after content is added (to ensure correct data type)
- Fix check of integers. `canConvert<int>()`returns true for both QString and int. Thus convert to string and then check for int conversion.
* Activate filtering when unchecking all items in list with only integers
- Reactivate filtering when uncheck of all items for a list with only integer values (to keep consistency between filter and list)
- Update function name for clarity
---------
Co-authored-by: Jørgen Herje <jorgen.herje@ceetronsolutions.com>
* Refactor interface to PdmObjectHandle and PdmFieldHandle
Return objects instead of passing in structures as parameters
* Add nodiscard to several functions
* Remove redundant this->
* Rename to ptrReferencedObjectsByType
* Fwk: Avoid use of include_directories
* Remove target_include_directories from Commands
* Refactor cmake includes
- Avoid using include_directories, and use target_include_directories.
- Use add_subdirectory directly from main cmakefile, do not use in ApplicationLibCode.
* #9773 Refactor ensemble import dialog.
* #9773 Add support for ensemble import of StimPlan/Reveal summary data.
* #9773 Add method for finding min and max time steps.
* #9773 Add option for resampling to hour intervals.
* #9773 Add option for resampling to minute intervals.
* #9773 Ensemble statistics: determine sub-sampling period dynamically.
* Use RiaWeightedMeanCalculator for curve resampling.
* Add HOUR and MINUTE to date time app enum.
* #9773 Generate better ensembles for StimPlan summaries.
* #9773 Fix parameters.txt lookup for StimPlan summaries
* Refactor: Improve interface of RicImportSummaryCasesFreature::createSummaryCasesFromFiles
Co-authored-by: Magne Sjaastad <magne.sjaastad@ceetronsolutions.com>
* Add utility to check is roff file contains grid data
* Import of multiple grid files or 1 grid file with N property files
* Fix build errors for using RifRoffFileTools from Commands
- Move template implementation to cpp-file
- Add roffcpp to link libraries in CMake for Commands
* Improve/fix import of single grid file with N property files
* Fix missing add of roff case Id
* Use unique_ptr
* Improve default assignment of curve appearance
* Improve display of color tags in tree view items
* Select curve or ensemble instead of plot
* Only change curves connected to a Rim-object
* Improve color management for ensemble curves
Use a base color for statistics curves and set realization curves transparent
Make sure new curves are assigned a unique color
Harmonize how dropped addresses are handled
* Update all tags always
The update of tags for a subset of tree nodes is currently broken. Always update all tags.
* Add const
* Set warning level to /W3 for MSVC to catch more warnings
* remove several excluded checks for clang
* removed several unused variables
* Hide warnings qwt
* add missing parentheses in logical expressions
* Remove double check on same logical expression
- Replace current content if RifRoffReader to utilize roffcpp
- Remove unit tests not applicable for function (some previous tests now belongs to roffcpp)
Improved GitHub Action to run clang-format as part of clang-tidy
* Simplify clang-tidy workflow
* Added modernize-use-using, modernize-redundant-void-arg, readability-static-accessed-through-instance
* Add nolint for libecl typedefs
Summary Table for showing summary vectors in table format
- Resampling on date resolution
- Active for group, region and well
- Right click menu option from Summary case tree
