Read the summary unit system from SMSPEC INTEHEAD, and fall back to vector
units for ESMRY files without SMSPEC. The unit system is read on first
request to keep summary import fast. Ensembles use the same realization as
for addresses. New RFT plots get the depth unit from their data sources.
A 3D pick can report a grid index that is not valid for the view grid,
which read past the end of the local grids in release builds.
Call stack:
[0] performCrashLogging at ResInsight/ApplicationExeCode/RiaMainTools.cpp:178
[1] manageSegFailureSA(int, siginfo_t*, void*) at ResInsight/ApplicationExeCode/RiaMainTools.cpp:310
[3] cvf::ref<RigLocalGrid>::p() at ResInsight/Fwk/VizFwk/LibCore/cvfObject.inl:307
[4] RiuCellAndNncPickEventHandler::handle3dPickEvent(Ric3dPickEvent const&) at ResInsight/ApplicationLibCode/UserInterface/RiuCellAndNncPickEventHandler.cpp:397
[5] RiuViewerCommands::handlePickAction(int, int, QFlags<Qt::KeyboardModifier>) at ResInsight/ApplicationLibCode/UserInterface/RiuViewerCommands.cpp:756
[9] RiaGuiApplication::notify(QObject*, QEvent*) at ResInsight/ApplicationLibCode/Application/RiaGuiApplication.cpp:1879
[15] RiaGuiApplication::notify(QObject*, QEvent*) at ResInsight/ApplicationLibCode/Application/RiaGuiApplication.cpp:1879
[26] main at ResInsight/ApplicationExeCode/RiaMain.cpp:267
[27] __libc_start_main at :0
A view without visible cells gives min > max, which underflowed the
sector size and threw std::length_error when allocating the arrays.
Call stack:
[0] performCrashLogging at ResInsight/ApplicationExeCode/RiaMainTools.cpp:178
[1] manageSegFailureSA(int, siginfo_t*, void*) at ResInsight/ApplicationExeCode/RiaMainTools.cpp:310
[5] manageTerminate() at ResInsight/ApplicationExeCode/RiaMainTools.cpp:249
[12] RigResdataGridConverter::exportGrid(QString const&, RigEclipseCaseData*, bool, cvf::Array<unsigned char> const*, cvf::Vector3<unsigned long> const&, cvf::Vector3<unsigned long> const&, cvf::Vector3<unsigned long> const&) at ResInsight/ApplicationLibCode/ReservoirDataModel/RigResdataGridConverter.cpp:83
[13] RicExportEclipseSectorModelFeature::exportGrid(RimEclipseView*, RicExportEclipseSectorModelUi const&) at ResInsight/ApplicationLibCode/Commands/ExportCommands/RicExportEclipseSectorModelFeature.cpp:167
[14] RicExportEclipseSectorModelFeature::executeCommand(RimEclipseView*, RicExportEclipseSectorModelUi const&, QString const&) at ResInsight/ApplicationLibCode/Commands/ExportCommands/RicExportEclipseSectorModelFeature.cpp:141
[15] RicExportEclipseSectorModelFeature::openDialogAndExecuteCommand(RimEclipseView*) at ResInsight/ApplicationLibCode/Commands/ExportCommands/RicExportEclipseSectorModelFeature.cpp:118
[16] caf::CmdFeature::actionTriggered(bool) at ResInsight/Fwk/AppFwk/cafCommand/cafCmdFeature.cpp:176
[25] RiaGuiApplication::notify(QObject*, QEvent*) at ResInsight/ApplicationLibCode/Application/RiaGuiApplication.cpp:1879
[31] RiaGuiApplication::notify(QObject*, QEvent*) at ResInsight/ApplicationLibCode/Application/RiaGuiApplication.cpp:1879
[43] RiuViewerCommands::displayContextMenu(QMouseEvent*) at ResInsight/ApplicationLibCode/UserInterface/RiuViewerCommands.cpp:702
[47] RiaGuiApplication::notify(QObject*, QEvent*) at ResInsight/ApplicationLibCode/Application/RiaGuiApplication.cpp:1879
[53] RiaGuiApplication::notify(QObject*, QEvent*) at ResInsight/ApplicationLibCode/Application/RiaGuiApplication.cpp:1879
[64] main at ResInsight/ApplicationExeCode/RiaMain.cpp:267
[65] __libc_start_main at :0
Move Pressure Drop and Length and Depth from the segment collection to
the well path completion settings. PRESSURE_COMPONENTS is now a dated
WELSPECS attribute used for the WELSEGS header at export, and is
rejected on SEGMENT events.
Well connections read from the restart file referenced the original refined
cells in the main grid. These cells are hidden after reconstruction, but the
well cell visualization does not check the invalid flag, so they were still
drawn. Re-point well connections and well heads to the corresponding LGR cells
and recompute the well cells per grid.
Add AvoidFaults option that blocks cluster growth across fault faces and
fault NNCs, and generate a WELL_TARGET_FAULT_FACES result with the number
of fault faces per cell.
* Update flowdiag-app submodule with grid source abstraction
* Add opm-common grid source for flow diagnostics
* Enable flow diagnostics for grids imported with opm-common
* Test flow graph from opm-common matches resdata
* Test flow diagnostics results are equal for all grid readers
* Document EGrid constructor behavior in flow diagnostics grid source
Add fixed, min and max segment length per segment interval (fixed is exclusive with min/max, min and max can be combined), connect COMPSEGS rows to the nearest segment node, and add collection options for a single segment before the first and after the last perforation.
Crash signature 482d5570b385.
RifEclipseOutputFileTools::timeSteps divided the INTEHEAD count by timeSteps->size(), which is zero for a restart file without INTEHEAD. The guard is already in dev (#14901); add the test TimeStepsFileWithoutIntehead, which writes an UNRST with only SEQNUM.
Call stack:
Crash signature c0fae31c2301.
RifElementPropertyReader reads column metadata when the file is added and the data later, on cell pick. If the file has since been moved or deleted, readData returns no data and CAF_ASSERT( dataColumns.size() == table.data.size() ) aborts.
Return an empty result when the table has no data or the column count does not match. New test ReadAllElementPropertiesFromRemovedFile.
Call stack:
[5] cvf::AssertHandlerConsole::handleAssert(char const*, int, char const*, char const*) at ResInsight/Fwk/VizFwk/LibCore/cvfAssert.cpp:125
[6] RifElementPropertyReader::readAllElementPropertiesInFileContainingField(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&) at ResInsight/ApplicationLibCode/FileInterface/RifElementPropertyReader.cpp:120
[7] RigFemPartResultsCollection::findOrLoadScalarResult(int, RigFemResultAddress const&) at ResInsight/ApplicationLibCode/GeoMech/GeoMechDataModel/RigFemPartResultsCollection.cpp:451
[8] RigFemPartResultsCollection::assertResultsLoaded(RigFemResultAddress const&) at ResInsight/ApplicationLibCode/GeoMech/GeoMechDataModel/RigFemPartResultsCollection.cpp:1014
[9] RimGeoMechResultDefinition::hasResult() at ResInsight/ApplicationLibCode/ProjectDataModel/GeoMech/RimGeoMechResultDefinition.cpp:722
[10] RiuSelectionChangedHandler::addResultCurveFromSelectionItem(RiuGeoMechSelectionItem const*) const at ResInsight/ApplicationLibCode/UserInterface/RiuSelectionChangedHandler.cpp:208
[11] RiuSelectionChangedHandler::handleItemAppended(RiuSelectionItem const*) const at ResInsight/ApplicationLibCode/UserInterface/RiuSelectionChangedHandler.cpp:119
[12] RiuCellAndNncPickEventHandler::handle3dPickEvent(Ric3dPickEvent const&) at ResInsight/ApplicationLibCode/UserInterface/RiuCellAndNncPickEventHandler.cpp:459
[13] RiuViewerCommands::handlePickAction(int, int, QFlags<Qt::KeyboardModifier>) at ResInsight/ApplicationLibCode/UserInterface/RiuViewerCommands.cpp:718
[17] RiaGuiApplication::notify(QObject*, QEvent*) at ResInsight/ApplicationLibCode/Application/RiaGuiApplication.cpp:1828
[23] RiaGuiApplication::notify(QObject*, QEvent*) at ResInsight/ApplicationLibCode/Application/RiaGuiApplication.cpp:1828
[34] main at ResInsight/ApplicationExeCode/RiaMain.cpp:267
[35] __libc_start_main at :0
RimEclipseContourMapProjection::updateGridInformation() dereferences eclipseCase() unchecked. It is null when the contour map view has no case, e.g. when a grid calculation triggers updateAll3dViews.
updateGridInformation() resets the grid and projection and returns when the case or its data is missing. generateResultsIfNecessary() returns when there is no projection, and computeMinMaxValuesAllTimeSteps() handles a missing case. New test RimEclipseContourMapProjection.GenerateResultsWithoutEclipseCase.
Call stack:
[3] RimEclipseCase::eclipseCaseData() at ResInsight/ApplicationLibCode/ProjectDataModel/RimEclipseCase.cpp:196
[4] RimEclipseContourMapProjection::updateGridInformation() at ResInsight/ApplicationLibCode/ProjectDataModel/ContourMap/RimEclipseContourMapProjection.cpp:250
[5] RimContourMapProjection::generateResultsIfNecessary(int) at ResInsight/ApplicationLibCode/ProjectDataModel/ContourMap/RimContourMapProjection.cpp:138
[6] RimEclipseContourMapProjection::clearGridMappingAndRedraw() at ResInsight/ApplicationLibCode/ProjectDataModel/ContourMap/RimEclipseContourMapProjection.cpp:167
[7] RimReloadCaseTools::updateAll3dViews(RimEclipseCase*) at ResInsight/ApplicationLibCode/ProjectDataModel/RimReloadCaseTools.cpp:157
[8] RimGridCalculation::updateDependentObjects() at ResInsight/ApplicationLibCode/ProjectDataModel/RimGridCalculation.cpp:762
[9] RicUserDefinedCalculatorUi::calculate() const at ResInsight/ApplicationLibCode/Commands/RicUserDefinedCalculatorUi.cpp:178
[10] RicCalculatorWidgetCreator::slotCalculate() at ResInsight/ApplicationLibCode/Commands/RicCalculatorWidgetCreator.cpp:205
RigFlowDiagResults::activeCellInfo() dereferences the ancestor RimEclipseResultCase and its eclipseCaseData() unchecked. The derived results (TOF, Cell Fraction, Communication, Max Fraction Tracer) crash when the solution is detached or the case data is released.
activeCellInfo() now returns nullptr when the case or its data is missing, and the derived-result calculations return nullptr in that case. New test RigFlowDiagResults.DerivedResultWithoutEclipseCase.
Call stack:
[4] RigFlowDiagResults::calculateDerivedResult(RigFlowDiagResultAddress const&, unsigned long) at ResInsight/ApplicationLibCode/ReservoirDataModel/RigFlowDiagResults.cpp:211
[5] RigFlowDiagResults::findOrCalculateResult(RigFlowDiagResultAddress const&, unsigned long) at ResInsight/ApplicationLibCode/ReservoirDataModel/RigFlowDiagResults.cpp:95
[6] RigFlowDiagStatCalc::minMaxCellScalarValues(unsigned long, double&, double&) at ResInsight/ApplicationLibCode/ReservoirDataModel/RigFlowDiagStatCalc.cpp:49
[7] RigStatisticsDataCache::minMaxCellScalarValues(unsigned long, double&, double&) at ResInsight/ApplicationLibCode/ResultStatisticsCache/RigStatisticsDataCache.cpp:121
[8] RimEclipseResultDefinitionTools::updateLegendForFlowDiagnostics(...) at ResInsight/ApplicationLibCode/ProjectDataModel/RimEclipseResultDefinitionTools.cpp:422
[9] RimEclipseResultDefinition::updateRangesForExplicitLegends(...) at ResInsight/ApplicationLibCode/ProjectDataModel/RimEclipseResultDefinition.cpp:1705
[10] RimEclipseView::updateLegendRangesTextAndVisibility(...) at ResInsight/ApplicationLibCode/ProjectDataModel/RimEclipseView.cpp:1699
[11] RimEclipseView::onUpdateLegends() at ResInsight/ApplicationLibCode/ProjectDataModel/RimEclipseView.cpp:1568
[12] RimEclipseView::onCreateDisplayModel() at ResInsight/ApplicationLibCode/ProjectDataModel/RimEclipseView.cpp:854
Copies and plots created from templates kept the source DockWindowId. The dock
manager identifies dock widgets by name, so the earlier dock widget was deleted on
dock state restore, leaving a dangling pointer that crashed in setActiveViewer.
- Do not copy DockWindowId; copies get a new id
- Assign a new id if a dock widget with the same name exists
- Use QPointer for the dock widget
- RifEclipseOutputFileTools::timeSteps: avoid integer division by zero when
the restart file has no INTEHEAD
- libecl ecl_grid: return NULL when the main EGRID grid cannot be created,
and skip NNCHEAD blocks that cannot be read
- libecl well_info: skip wells when the restart header cannot be read
- cvf::Frustum::isOutside: do not assert on an incomplete frustum, cull nothing
Fixes#14901.
For nested hybrid grids, IJK range filters (I/J/K slices and IJK filters)
now refer exclusively to the original (coarse) grid IJK. Nested-grid local
IJK values are no longer offered, and every cell, including cells in all
refinement levels, is mapped to the original IJK of its top-most parent.
- Add RigNestedHybridGridLayout describing how original cells are embedded
in the flat grid, shared by the LGR reconstruction and the IJK mapping
- RigMainGrid: store the layout and compute the original IJK of any cell on
demand by following the parent cell chain, without per-cell storage
- Range filter UI: slider limits, clamping, defaults and active cell range
use the original grid dimensions; grid selection is hidden
- Evaluate range filters on all grids using the original IJK in the 3D view,
combined filters and data filters
- 3D view context menu slices use the original IJK of the picked cell
- Add unit tests for the layout, the IJK mapping against OLDIJK, and slice
filtering across refinement levels
Explicitly initialize the optional topXY member when constructing
RigWellPathFormation via aggregate initialization in the test helper,
avoiding a GCC -Wmissing-field-initializers warning.
Fixes#14882.
Let the RFT parameter cross plot reference a RimWellFormationsFile and use its
well-pick formations to filter/group data by zone, pushed down to the tornado
plot and RFT correlation sub plots.
Parse depth-based FMU well-pick formations.csv files in RifWellPathFormationReader
and expose them as a project-level RimWellFormationsCollection of RimWellFormationsFile
objects. RigWellPathFormations becomes a value type with top/base MD and TVD depths
per formation, independent from the existing K-layer-index .lyr formation names.
Return values instead of out-parameters, and move the error dialog
from the reader to the importer so the reader can be unit tested.
Fix crash in level detection when erasing while iterating.
A well in a radial grid is on the grid axis or on a face between angular cells, so no cells are intersected. Fall back to the innermost cell column placed by depth. Fixes empty PLT and RFT grid curves.
Region-to-region addresses were reconstructed as "R1 - R2" (with spaces) when
looking up keywords for ensemble realizations without a pre-built address map,
but opm-common's on-disk keyword format has no spaces ("R1-R2"). This caused
silent data loss for region-to-region vectors (RGFT*, ROFT*, RWFT*, etc.) in
all but one ensemble realization.
Fix formatUiTextRegionToRegion() to use "R1-R2", and add a regression test.
Fixes#14853.
- Move depthTypeAbbreviation(), computePressureSamplesPerCase() and
computeMeanPressurePerCase() out of RimParameterRftCrossPlot into a new
standalone RimRftCrossPlotTools namespace, shared by RimParameterRftCrossPlot
and RimRftTornadoPlot (removing duplicated code in the latter).
- Extract pure, reader-independent helpers filterPressuresByDepthRange() and
computeMean() so the depth filtering and averaging logic can be unit tested
without RFT reader/ensemble mocks.
- Add RimRftCrossPlotTools-Test.cpp with gtest cases covering depth range
filtering (disabled, inclusive bounds, out-of-range, mismatched sizes) and
mean computation (empty/normal), plus depth type abbreviation.
Move RimWellLogRftCurve::rftCurveDepthValues into RimRftCrossPlotTools
This static helper's only caller was already RimRftCrossPlotTools::computePressureSamplesPerCase, so move it alongside the other RFT cross plot/tornado plot helpers for consistency.
Recognizes Vec3-shaped object schemas ({x, y, z} number properties)
structurally in RimWorkflowDescribeTools and dispatches them to a new
RimWorkflowVec3Binding in RimWorkflowTaskInput::createBinding(). Stores
the value as a cvf::Vec3d field, parses JSON object defaults, and emits
a YAML flow-mapping ({x: .., y: .., z: ..}) matching the taskmaestro
Vec3 pydantic model shape.
Replace the rips.taskmaestro_helper introspect subcommand with
`python -m taskmaestro workflow describe --json`. RimWorkflowDescribeTools
converts the describe output (JSON schemas, depends_on, config_values)
into the workflow graph used by the Workflow UI. This also adds support
for collect dependencies and maps rips.Reservoir to EclipseCase pickers.
- Camera::fitView/computeFitViewEyePosition: derive one corrected, non-parallel up vector and use it consistently for right, upNorm, planeTop and the final setFromLookAt(), instead of only repairing the right vector. Previously the degenerate (parallel dir/up) case still produced a singular view matrix because up itself was never corrected. Added a regression test exercising fitView() end-to-end (not just computeFitViewEyePosition()) that checks the resulting direction/up/right form a valid orthonormal basis.
- RimViewController::updateCameraLink/updateTimeStepLink: guard against ownerViewLinker()->masterView() being null (RimViewLinker::setMasterView(nullptr) is a supported state), not only against a null view linker.
- RicHistogramPlotTools: use RiaGuiApplication::isRunning() before calling RiaGuiApplication::instance(), since instance() itself asserts when there is no running GUI application.
- RimDockWindowController::updateViewerWidget: create the view widget before the dock widget, so a failed view-widget creation does not leave a dock widget allocated without a dock manager (which deleteDockWidget() cannot clean up).
- RimStimPlanModelCalculator::calculateFormation: avoid continue via a small lambda, and reject double values outside the range of int before the static_cast to avoid undefined behavior.
dir^up becomes a zero vector when the view direction and up vector are parallel, producing an invalid zero-normal plane. Plane::distanceToOrigin() then asserts/aborts (CVF_ASSERT, always active). Fall back to an arbitrary axis to compute a valid right vector in this degenerate case.
RimViewController::masterView() dereferenced ownerViewLinker() without a
null check, causing a crash when the controller has been detached from
its RimViewLinker parent (e.g. mid-destruction, after the owning
child-array field has already erased it but before delete runs).
The same unguarded ownerViewLinker() dereference existed in several other
methods: isActive(), isCameraLinked(), isTimeStepLinked(),
isResultColorControlled(), isLegendDefinitionsControlled(),
isPropertyFilterOveridden(), updateOverrides(),
updateDuplicatedPropertyFilters(), updateCameraLink(),
updateTimeStepLink(), updateResultColorsControl(),
updateLegendDefinitions() and applyCellFilterCollectionByUserChoice().
All now store ownerViewLinker() in a local and null-check it before use,
matching the pattern already used in isCellFiltersControlled().
Guarded two unconditional null derefs: dockWidget->setWidget(viewWidget) when viewWidget creation fails, and viewPdmObject() in handleViewerDeletion() when no view has ever been assigned to control. Added regression test for the handleViewerDeletion() case; the setWidget() path requires a running GUI/main window and isn't reachable from the headless unit test harness.
synchronize2dIntersectionViews() could crash in two ways: when the view's ownerCase() is null, and when the collection has no Rim3dView ancestor at all (e.g. mid-destruction after detaching from the PDM tree, where firstAncestorOrThisOfTypeAsserted<Rim3dView>() returns null since CAF_ASSERT is compiled out in release). Both cases are now guarded.
A system HDF5 reports /usr/include. CMake filters implicit dirs from
target include directories but not from the source-file
INCLUDE_DIRECTORIES property, so -I/usr/include reached the command line
and broke #include_next <math.h> in <cmath> on gcc-toolset.
* #14806 Faults: Compute unnamed fault faces in parallel and only from positive faces
- A negative I or J face is the positive face of the neighbor cell with a lower
index, and is already handled when that neighbor is processed. Only visit the
positive faces.
- Each cell only writes the fault index of its own positive faces and the
opposite faces of its neighbors, so process the cells in parallel. The
thread results are appended in thread order, so the fault faces keep the
same order as before.
* #14806 Faults: Add unit tests for parallel unnamed fault face computation
Build a small in-memory grid (no file, no view) with geometric faults at
every I interface, and verify that calculateFaults() finds all unnamed
fault faces, keeps them ordered by native cell index (the per-thread
results are appended in thread order), and separates faces touching an
inactive cell into the dedicated inactive fault face list.
Building the cell search tree was dominated by one small std::vector<int>
allocation per leaf, and a tree with one cell per leaf becomes very deep for
large grids.
- BoundingBoxTree: Store leaf ids in flat arrays, and move the input data
instead of copying it. The tree shape is unchanged. Queries no longer copy
the ids of each leaf.
- RigMainGrid: Always group at least 8 cells along K in each leaf.
findIntersectingCells() removes cells not intersecting the query bounding
box, so the result is the same set of cells as for a tree with one cell per
leaf. This also applies to very large grids, which previously got the
cells of the whole leaf.
- Include cells of nested LGRs and LGR cells in invalid main grid cells in
the grouped tree, as the previous tree with one cell per leaf did.
Fixes a set of related bugs affecting ensemble contour maps that use a GENERATED (grid calculation) result, plus a related bug where switching a view's case lost generated results.
- Remove unused SOURCE_GROUP_HEADER_FILES from GrpcInterface CMakeLists
- Scope the following defines to the files that need it ENABLE_GRPC, USE_ODB_API , USE_OPENVDS, USE_HDF5
- RifOdbReader.cpp copied an odb_InstanceRepository by value, which
fails to compile under MSVC's strict conformance mode due to an
ambiguous implicit copy constructor in the vendor headers (diamond
inheritance). Use a reference instead, since it was only ever read
from.
Magne Sjaastad
Kristian Bendiksen