Add the data model for showing contour maps inside a regular 3d view. RimContourMapInView is a presentation wrapper that decides where a contour map is placed vertically in the 3d scene and what parts of it are drawn; the contour map itself, including the result, the aggregation and the computed geometry, remains owned by the contour map view it points at. RimContourMapInViewCollection owns the set of contour maps available in a 3d view. Add a CONTOUR_MAP entry to RiaDefines::ItemIn3dView so the project tree can be refreshed for just the contour map items.
Each iteration writes to its own element of accumulatedValidValues, which is sized before the loop, so no synchronization is required. The write to curveValues a few lines below uses the same pattern without a critical section.
All unnamed critical regions share a single process wide lock, so this also removes contention against unrelated parallel loops.
Send one batched request per event batch instead of one request per event.
Application Insights v2/track accepts an array of envelopes, so a batch of up
to maxBatchSize (512) events was previously issued as 512 concurrent POSTs.
QNetworkAccessManager only opens a handful of connections per host, so the
queued requests were aborted by their own transfer timeout before reaching the
wire, reported as "HTTP 0: Operation canceled".
Honour the circuit breaker in processEvents(). It was only checked when
enqueuing, so the up to 10000 already queued events kept being posted at full
rate after the breaker opened. The crash and shutdown flush bypasses the
breaker so a crash report is still attempted.
Keep at most one request in flight. Failures are only observed when the reply
finishes, which for an unreachable endpoint takes the full transfer timeout,
and the 100 ms timer kept launching requests during that window.
Log the circuit breaker transition once instead of on every subsequent failure.
Only read the reply body when the device is open. An aborted reply has a closed
device, and reading from it emitted a QIODevice warning per request.
Call attemptReconnection() from the process timer. It was dead code, so once
the breaker opened it could only close if a reply happened to succeed.
Sumo data is loaded so the application stays responsive while it waits.
Run Sumo transfers on a dedicated thread
Split RiaSumoConnector into transport and data delegates
Load Sumo summary vectors concurrently and without waiting
Show that Sumo data is being loaded
When the summary plot time axis is configured to show time from simulation start, the text produced by Show Plot Data and the ASCII export now reports the same values instead of date and time. The time column header becomes "Time [<unit>]", and each row reports the elapsed time relative to the first time step of the first curve, scaled to the display unit selected on the time axis. Plots using the date based time axis are unchanged.
Time in months and years is computed using calendar arithmetic instead of a fixed number of seconds per unit, so a time step exactly N calendar months or years after the simulation start reports exactly N. This makes resampled data report whole numbers also when a leap year is part of the interval. The calendar arithmetic is available as RiaQDateTimeTools::calendarYearsBetween() and calendarMonthsBetween(), and is used both when plotting the curves and when reporting the time column.
Introduce RiaZScaleTools as a single source for the Z-scale factor list, merging the predefined factors with custom values entered during the session. The toolbar combo box, the property editor combo box and the Ctrl+Shift+Up/Down shortcuts all use this shared sorted list.
The toolbar combo box previously appended custom values at the end, producing an unsorted, ever-growing list, and the shortcuts stepped through the predefined factors only, skipping custom values visible in the list.
The lower limit of a logarithmic color range was computed from the value closest to zero, which is not always available. When this value was zero, log10() returned -inf and the lower limit ended up as zero. Use the closest power of ten below the lowest value instead, and use the value closest to zero only when the lowest value is zero or negative. Guard computeTenExponentCeil() and computeTenExponentFloor() against zero, and make sure the range always spans at least one decade.
RiaCurveMerger::addCurveData and RiaWellLogCurveMerger::addCurveData only
validated that the X and Y vectors have the same size with CAF_ASSERT, which is
compiled out in optimized builds. Mismatching sizes are a legitimate run-time
condition for data read from file, so the check has to hold in release builds as
well.
In RiaCurveMerger the shared-X fast path in computeInterpolatedValues() indexes
the Y vector of every curve using the sample count of the first curve. A curve
with identical X values but fewer Y values therefore read past the end of its
heap buffer inside the OpenMP loop. RimEnsembleStatisticsCase passes time steps
and values straight from the summary reader without reconciling the sizes, and
realizations in an ensemble normally share time steps, so this was reachable for
an ensemble containing an ongoing simulation.
Both mergers now truncate the incoming data to the common sample count instead.
For RiaWellLogCurveMerger this is also an improvement in behaviour, since
lookupYValue() used to discard the whole curve when the sizes differed.
Add unit tests covering a single curve with fewer values than time steps and
curves with shared time steps where one curve has fewer values.
Deleting PDM objects on a worker thread is not safe. PdmObjectHandle::prepareForDelete()
mutates state owned by other objects, it nulls the guarded pointers held by other objects
and clears m_pointersReferencingMe, an unsynchronised std::set that every PdmPointer
construction and destruction touches. Destroying an object off the main thread therefore
races with the main thread on the shared object graph. See issue 14491.
Profiling a summary ensemble teardown shows the mechanism does not pay for itself. Releasing
397 Drogon realizations takes 0.24 s sequentially and 0.24 s in parallel, and for a heavy
case the parallel release is slower than the sequential one, because free() is serialised
inside the allocator. The PDM bookkeeping itself is 0.4 to 2.8 percent of the teardown.
Remove the class and deleteChildrenAsync(), and delete synchronously instead. The call sites
that used clearWithoutDelete() and a manual delete loop to work around the race can now call
deleteChildren() directly. Add caf::PdmObjectHandleTools::deleteObjects() for the case where
the objects are no longer owned by a child array field.
The observer disconnection from issue 12262 does not depend on clearWithoutDelete(). ~Signal()
unregisters itself from every observer, so a deleted child detaches itself. That fix addressed
the async race, where ~Signal() mutated the observer list from a worker thread. The unit test
is updated to assert the observed signal count directly instead of relying on a crash.
cvfBase.h includes cvfAssert.h, so these six files were the last indirect route
into the assert header that the previous commit removed from ApplicationLibCode.
Five files dropped the include with no further change. RimSeismicAlphaMapper
declared alphaValue as returning cvf::ubyte, a typedef defined in cvfBase.h
itself, so no smaller VizFwk header provides it. Since cvf::ubyte is
unsigned char, use that directly in the declaration, the definition and the
cast. The type is identical, so callers are unaffected, and the class no longer
depends on VizFwk at all.
Migrate all assert macros in ApplicationLibCode to CAF_ASSERT and remove every
use of cvfAssert.h.
CVF_ASSERT is replaced one to one. CVF_TIGHT_ASSERT is also replaced by
CAF_ASSERT, which is semantically exact: CVF_ENABLE_TIGHT_ASSERTS is 1 only
under _DEBUG, and that is what CAF_ASSERT now does. The two CVF_FAIL_MSG sites
become CAF_ASSERT( false && "message" ), preserving the message with the idiom
already used elsewhere in the code base.
Counts before and after: CVF_ASSERT 1044 to 0, CVF_TIGHT_ASSERT 66 to 0,
CVF_FAIL_MSG 2 to 0, cvfAssert.h references 154 to 0.
Include handling: files that included cvfAssert.h directly now include
cafAssert.h instead, includes left dead by the migration are removed, and files
that were relying on cvfAssert.h transitively get an explicit cafAssert.h. Files
that reach cafAssert.h through another caf header are left unchanged; a missing
include here is a compile error, not a silently disabled assert.
ResultStatisticsCache links only LibCore and therefore had no path to
cafAssert.h. Add the cafPdmCore directory as a private include path rather than
linking the library, since cafAssert.h is header only.
Note that this stops these asserts from firing in Release and RelWithDebInfo,
where CVF_ASSERT was previously active.
* #14411 Enforce name uniqueness for surfaces, polygons and folders
Names must be unique among siblings sharing the same parent folder. Items in different folders may keep identical names, and comparison is case sensitive.
Siblings are the objects held by the same caf::PdmChildArrayField. Items and folders live in two distinct child arrays in caf::PdmNestedCollection, so a folder and an item may share a name under the same parent.
The Python API gets an OnNameConflict flag on AddFolder, CreatePolygon, ImportSurface and NewRegularSurface, supporting FAIL (default), AUTO_RENAME and OVERWRITE. NewSurface is left out, as grid case surfaces derive their tree label from the case and K index and carry no name of their own.
The ensemble file set removed the file extension by searching for the last dot in the complete path. When the path pattern was already without extension, the last dot was found in a folder name, truncating the path pattern and causing the search for SMSPEC files to fail.
Add RiaFilePathTools::removeFileExtension based on std::filesystem::path::replace_extension, and use it both in RimEnsembleFileSet and in the grid and summary ensemble import, replacing a duplicated lambda doing the same operation.
Cloud services are configured from RiaApplication::initialize(), which runs before the subclasses append their logger instances. All messages from the cloud config file search were therefore dropped. Add a virtual initializeLoggers() called before the cloud configuration is read, and move creation of the file logger and the std out logger into the overrides. The message panel logger depends on the main windows, and is still created in RiaGuiApplication::initialize().
Do not write fields with IO disabled to the application store, mirroring the check already present when reading. This stops the cloud service configuration from being persisted into the user preferences file.
* Make sure we don't trigger another select when a view in the project tree is selected.
* Fix for #14255 and related issues
* Make sure we can close and open a main window, keeping the layout when reopened.
reportCrash pumps a nested Qt event loop from within the signal handler to
let the async crash-report HTTP POST finish. Pumping all events also
dispatches buffered mouse/keyboard events, which re-enter arbitrary UI code
mid-crash and can re-trigger the faulting path, causing a double-fault
inside the handler. Pump with QEventLoop::ExcludeUserInputEvents so socket
and timer events still flow (the reply completes) while user input is held
back.
Fixes#14312
Remove the legacy tree-based MSW extraction path now that the geometry-based path is the only supported implementation. This deletes extractSingleWellMsw_Legacy and all unused tree-building helpers in RicWellPathExportMswTableData, trims RicMswTableDataTools to the shared helpers used by the geometry path, and removes the RicMswItem class family (RicMswBranch, RicMswSegment, RicMswCompletions, RicMswExportInfo, RicMswSegmentCellIntersection, RicMswValveAccumulators).
Also remove the useImprovedMswDataStructures preference and its keyword, and delete the obsolete legacy-vs-geometry comparison unit test.
The template name resolution built a regular expression per key and used
QString::replace(QRegularExpression, value) to insert the value. When a value
inserted by one key contained an invalid UTF-16 sequence (e.g. a lone
surrogate from a data-derived case or well name), a subsequent key's global
match ran the regex engine over the malformed subject, causing an
out-of-bounds read and a segmentation fault inside PCRE2.
Replace the regex based substitution with a literal indexOf/replace loop that
preserves the existing word-boundary behavior, so values are never fed through
the regex engine. Empty keys are skipped.
The Completion Type result was registered only as a dynamic result, which
requires simulation time steps. Loading only grid geometry (e.g. a ROFF grid)
therefore made the result unavailable, since there are no time steps to compute
it for.
Register and compute a STATIC_NATIVE variant of Completion Type in addition to
the existing DYNAMIC_NATIVE one, computed as a single time-step-independent
frame. The shared per-frame computation is factored out of
computeCompletionTypeForTimeStep so both variants reuse it. The virtual
perforation transmissibilities already handle the no-restart case by clamping to
a single frame, so the static result can be computed at calc time step 0.
The legend/category predicates and the completion-type result clearing are
broadened to recognise the static variant so it renders with the same discrete
named-category legend as the dynamic one.
Persist the geometry of PdmUiPropertyViewDialog and RiuPropertyViewTabWidget to the application settings on close and restore it on the next show. Restoring is done in showEvent rather than the constructor so it is applied reliably for a modal dialog. The settings key includes the bound object class keyword so distinct dialogs that share a window title do not collide.
This behaviour is gated behind a new "Remember Dialog Size" experimental feature, disabled by default. PdmUiPropertyViewDialog cannot access RiaPreferencesSystem, so the application pushes the current setting via the static enableGeometryPersistence(), following the existing pattern used for class-name display. RiuPropertyViewTabWidget queries the feature directly.
Magne Sjaastad
JJ
Kristian Bendiksen
Jørgen Herje
jonjenssen