RimWellRftPlot: add detachFromDockPermanently(), which removes the plot from its dock
and discards the window controller for good (unlike removeWindowFromDock(), which must
leave the controller intact so the window can be re-docked later). RimWellRftPlot no
longer docks itself in its constructor, since it can also be embedded as a non-dockable
child of another plot. RicCreateRftPlotsFeature now explicitly calls dockAsPlotWindow()
for its stand-alone RFT plot to preserve existing behavior.
RimRftCorrelationReportPlot: use detachFromDockPermanently() instead of
removeWindowFromDock() for its embedded RimWellRftPlot, and re-apply that detachment in
initAfterRead(), since the PDM factory bypasses the constructor when restoring child
plots from a project file.
RimWellRftPlot::dataSource() returned a default constructed variant when no source was selected. The variant then held a null RimSummaryCase pointer, and RicCreateRftPlotsFeature dereferenced it. Add std::monostate as first alternative to represent no data source.
* Fix defensive guards and TVD interpolation
Guard against out-of-bounds IJK and invalid cells in RifReaderRftInterface.
Guard against null eclCase in RimDataSourceForRftPlt::address.
Guard against null plot widgets in RiuMultiPlotPage.
Fix interpolateMdFromTvd corrupting valid entries after infinity TVD values
by skipping infinity entries in the first pass and tracking only the last
two valid MD values for the startMD adjustment.
* Add RiuQwtCurveSelectorFilter for click-to-select realization in Qwt plots
New shared event filter class that installs on a QwtPlot canvas and calls a
user-supplied callback with the closest data point on each click.
Migrate the local CurveSelectorFilter in RimParameterResultCrossPlot to use
the new shared class. Add Z_HIGHLIGHTED_CURVE to ZIndex enum and replace all
raw z-order integers in RiuQwtPlotCurveDefines with named constants.
* Add RFT correlation report plot with cross-plot and tornado plot
New classes:
- RimRftCorrelationReportPlot: composite plot showing an RFT well log track
alongside a parameter cross-plot and a tornado plot sub-plot.
- RimParameterRftCrossPlot: cross-plot of ensemble parameters vs RFT-derived
measured depth values, with click-to-select realization support.
- RimRftTornadoPlot: tornado plot with correlation-sorted parameter list and
click-to-select realization support.
- RicCreateRftCorrelationReportFeature: context menu command on RimWellRftPlot
that creates a RimRftCorrelationReportPlot in the correlation plot collection.
Wire up in RimCorrelationPlotCollection and RimContextCommandBuilder.
* Add click-to-select and highlight selected realization in RFT plots
Install RiuQwtCurveSelectorFilter on RimWellRftPlot canvas to support
click-to-select realization. Highlight the selected realization using a
contrast color (orange-red) and increased line thickness. React to both
click-to-select in the plot and selection changes in the Data Sources panel.
Add Z_HIGHLIGHTED_CURVE z-order and replace raw z-order integers with
named constants in RimWellRftPlot.
Highlight selected realization with XCROSS symbol in RimParameterRftCrossPlot
via RimSummaryEnsembleTools::findSummaryCase.
* RimWellRftPlot: add Create RFT Correlation Report to canvas right-click menu
Override appendMenuItems in RimWellRftPlot to add RicCreateRftCorrelationReportFeature.
Call appendMenuItems from RiuMultiPlotPage::contextMenuEvent so any plot type
can contribute canvas menu items without modifying RiuMultiPlotPage.
* RicShowPlotDataFeature: support RimRftCorrelationReportPlot
Add RimRftCorrelationReportPlot to the isCommandEnabled check and expand
it into its cross-plot and tornado sub-plots in onActionTriggered, matching
the pattern used for RimCorrelationReportPlot.
- Legend items are now ordered to match the project tree order
- Selecting a curve set in the project tree highlights it in the plot
and hides member curves of other curve sets (statistics unaffected)
- Clicking a legend item in the plot selects the curve set in the
project tree
- Improve text layout in dialog when multiple file names are found
- Fix missing update of ensemble curve sets
* Refactor well log track settings into modular classes
Major refactoring of RimWellLogTrack to delegate property axis, formation, region annotation, and well path attribute settings to dedicated settings classes. Introduces RimWellLogPropertyAxisSettings, RimWellLogFormationSettings, RimWellLogRegionAnnotationSettings, and RimWellLogWellPathAttributeSettings, each encapsulating related fields, UI logic, and option handling. Old fields are retained for migration and backward compatibility. Updates enums and signatures for consistency.
Store data sources and time steps directly to project file. Previously, this information was derived from existing curves in the plot, an approach that is fragile.
Import of previous file format is still supported.
* Do not create ensemble in initAfterRead
* Check if filter is active before update
* Do not recompute statistics on every loadData
* Removes unnecessary resampling
* MSVC: Add support for dynamic deoptimalization
* Make sure RFT plots are initialized based on curves in project file
* Make sure the progress dialog is always on top
* Add more progress info when loading project file
* Make sure names in RFT plots are updated
* Use vector name as axis object text, avoid identifier text
* Select the plot clicked at in the Project Tree
* Make sure RFT plots are updated when summary case and ensemble is changed
* Make sure all plots are updated for multiselect and toggle statistics
* Allow paste of plot on top level plot collection
* Allow multiple top level plots as destination for Append operations
* Compute average MD for intersections with a cell
* Create extractor for simulation well
* Remove rftReader from RifDataSourceForRftPlt
* Add function compute measured depth for RFT cells based on well path geometry
* Move statistics reader to well ensemble curve set
* Make sure both TVD and MD are cached if possible
* Add selection of grid case to use for estimation of measured depth (MD)
Add "Grid Model For MD" where the user can select a grid model. This grid model is propagated to a hidden field in EnsembleCurveSet. The grid model is then applied to RifReaderEnsembleStatisticsRft owned by EnsembleCurveSet
* Improve tree selection editor
- always call defineEditorAttributes
- use heightHint in editor attributes
- use tree selection editor as default editor for std::vector
* Use tree selection editor instead of list selection editor
List selection editor must be used when editing std::vector<cvf::vec3d> and similar. Replace other use of list selection editor with tree selection editor.
* Set checked state based on text string for integer only models
For models with only integer values, use text string to define the items to be selected. The full list will always be visible, and the checked state will be updated when editing the filter text.
Example: "1, 5-7" will set items 1, 5, 6, 7 checked and all other items unchecked
* Minor fixes
- Set placeholder text after content is added (to ensure correct data type)
- Fix check of integers. `canConvert<int>()`returns true for both QString and int. Thus convert to string and then check for int conversion.
* Activate filtering when unchecking all items in list with only integers
- Reactivate filtering when uncheck of all items for a list with only integer values (to keep consistency between filter and list)
- Update function name for clarity
---------
Co-authored-by: Jørgen Herje <jorgen.herje@ceetronsolutions.com>
* Refactor interface to PdmObjectHandle and PdmFieldHandle
Return objects instead of passing in structures as parameters
* Add nodiscard to several functions
* Remove redundant this->
* Rename to ptrReferencedObjectsByType
* #9963 Rft reader: Search for DATA file when required
WSEGLINK is used to establish the branch topology for MSW wells. Search and read WSEGLINK data when segment data is requested by the user. This can be a time consuming operation.
Avoid doing this search for standard RFT plots.
* Make sure that single summary curves are displayed correctly
* Make sure single summary curves are visible in the plot
* Make sure text for multiple wells in same grid cell is displayed correctly
* Improve selection of result in Advanced Snapshot Export
* Restore the main window that was on top when project was saved
* Trim string to make sure '/' is exported with no space in front
* #9872 RFT-plot: Make colors stable for curves in RFT plots
* Set version to RC_02
Move AppEnum init to RifDataSourceForRftPlt
Simplify constructors for RifDataSourceForRftPlt
Rename enum names in RifDataSourceForRftPlt::SourceType
Add missing pressureDepthData in RimDataSourceForRftPlt
* Avoid accessing nullptr
* remove unused function
* Allow RFT data from single summary case to be used in RFT plots
* #9736 Support horizontal plotting of LAS curves
Enable c++20 in top level cmake. Keep c++17 for GrpcInterface, as the protoc tool does not work with c++20.
Several code adjustments to fix compiler issues.
* #9371 RFT Curves: Add scaling factor
* Make sure isUsingAutoName is guarded by project file date
* Rearrange font and legend group in property editor
* Improve plot naming for depth track plots
* Move template text replace to string tools
* More data available for object template text
* Set plot visible and define default object name template text
* #9280 Fix missing horizontal error bars.
The x axis was not assigned properly for the error bars in the plot curve.
* Propagate error bar visibility state
* Make sure all curve values are set correctly for plot orientation
* Make sure depth zoom is propagated to the Qwt plot
* Expand min/max value range to allow more space around curves
* Use int values to represent RFT segment branch number
Magne Sjaastad
Jon Jenssen
magnesj
Kristian Bendiksen
