mirror of
https://github.com/OPM/ResInsight.git
synced 2026-08-27 05:37:21 -05:00
Magne Sjaastad
56e98ba1c4
Migrate all assert macros in ApplicationLibCode to CAF_ASSERT and remove every use of cvfAssert.h. CVF_ASSERT is replaced one to one. CVF_TIGHT_ASSERT is also replaced by CAF_ASSERT, which is semantically exact: CVF_ENABLE_TIGHT_ASSERTS is 1 only under _DEBUG, and that is what CAF_ASSERT now does. The two CVF_FAIL_MSG sites become CAF_ASSERT( false && "message" ), preserving the message with the idiom already used elsewhere in the code base. Counts before and after: CVF_ASSERT 1044 to 0, CVF_TIGHT_ASSERT 66 to 0, CVF_FAIL_MSG 2 to 0, cvfAssert.h references 154 to 0. Include handling: files that included cvfAssert.h directly now include cafAssert.h instead, includes left dead by the migration are removed, and files that were relying on cvfAssert.h transitively get an explicit cafAssert.h. Files that reach cafAssert.h through another caf header are left unchanged; a missing include here is a compile error, not a silently disabled assert. ResultStatisticsCache links only LibCore and therefore had no path to cafAssert.h. Add the cafPdmCore directory as a private include path rather than linking the library, since cafAssert.h is header only. Note that this stops these asserts from firing in Release and RelWithDebInfo, where CVF_ASSERT was previously active.
890 lines
44 KiB
C++
890 lines
44 KiB
C++
/////////////////////////////////////////////////////////////////////////////////
|
|
//
|
|
// Copyright (C) 2023- Equinor ASA
|
|
//
|
|
// ResInsight is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// ResInsight is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
// FITNESS FOR A PARTICULAR PURPOSE.
|
|
//
|
|
// See the GNU General Public License at <http://www.gnu.org/licenses/gpl.html>
|
|
// for more details.
|
|
//
|
|
/////////////////////////////////////////////////////////////////////////////////
|
|
|
|
#include "RifFaultReactivationModelExporter.h"
|
|
|
|
#include "RigFaultReactivationModel.h"
|
|
#include "RigGriddedPart3d.h"
|
|
|
|
#include "RiaApplication.h"
|
|
#include "RiaBaseDefs.h"
|
|
#include "RiaEclipseUnitTools.h"
|
|
#include "RiaFilePathTools.h"
|
|
#include "RiaVersionInfo.h"
|
|
#include "RiaWellLogUnitTools.h"
|
|
|
|
#include "RifInpExportTools.h"
|
|
#include "RifJsonEncodeDecode.h"
|
|
|
|
#include "RimFaultReactivationDataAccess.h"
|
|
#include "RimFaultReactivationEnums.h"
|
|
#include "RimFaultReactivationModel.h"
|
|
#include "RimFaultReactivationTools.h"
|
|
|
|
#include "cafAssert.h"
|
|
|
|
#include <cmath>
|
|
#include <filesystem>
|
|
#include <fstream>
|
|
#include <numbers>
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string> RifFaultReactivationModelExporter::exportToStream( std::ostream& stream, const RimFaultReactivationModel& rimModel )
|
|
{
|
|
auto [modelOk, errorMsg] = rimModel.validateModel();
|
|
if ( !modelOk ) return { false, errorMsg };
|
|
|
|
auto dataAccess = extractAndExportModelData( rimModel );
|
|
if ( !dataAccess ) return { false, "Unable to get necessary data from the input case." };
|
|
|
|
std::string applicationNameAndVersion = std::string( RI_APPLICATION_NAME ) + " " + std::string( STRPRODUCTVER );
|
|
|
|
using PartBorderSurface = RimFaultReactivation::BorderSurface;
|
|
std::vector<std::pair<PartBorderSurface, std::string>> borders = { { PartBorderSurface::UpperSurface, "TOP" },
|
|
{ PartBorderSurface::FaultSurface, "FAULT" },
|
|
{ PartBorderSurface::LowerSurface, "BASE" },
|
|
{ PartBorderSurface::Seabed, "SEABED" } };
|
|
|
|
// The two parts are "mirrored", so face number 4 of the two parts should face each other.
|
|
using FaultGridPart = RimFaultReactivation::GridPart;
|
|
std::map<std::pair<FaultGridPart, PartBorderSurface>, int> faces = { { { FaultGridPart::FW, PartBorderSurface::FaultSurface }, 5 },
|
|
{ { FaultGridPart::FW, PartBorderSurface::UpperSurface }, 5 },
|
|
{ { FaultGridPart::FW, PartBorderSurface::LowerSurface }, 5 },
|
|
{ { FaultGridPart::FW, PartBorderSurface::Seabed }, 2 },
|
|
{ { FaultGridPart::HW, PartBorderSurface::FaultSurface }, 5 },
|
|
{ { FaultGridPart::HW, PartBorderSurface::UpperSurface }, 5 },
|
|
{ { FaultGridPart::HW, PartBorderSurface::LowerSurface }, 5 },
|
|
{ { FaultGridPart::HW, PartBorderSurface::Seabed }, 2 } };
|
|
|
|
std::map<FaultGridPart, std::string> partNames = {
|
|
{ FaultGridPart::FW, "FW" },
|
|
{ FaultGridPart::HW, "HW" },
|
|
};
|
|
|
|
std::map<RimFaultReactivation::Boundary, std::string> boundaries = {
|
|
{ RimFaultReactivation::Boundary::Bottom, "BOTTOM" },
|
|
{ RimFaultReactivation::Boundary::FarSide, "FARSIDE" },
|
|
};
|
|
|
|
std::map<RimFaultReactivation::ElementSets, std::string> materialNames = {
|
|
{ RimFaultReactivation::ElementSets::OverBurden, "OVERBURDEN" },
|
|
{ RimFaultReactivation::ElementSets::IntraReservoir, "INTRA_RESERVOIR" },
|
|
{ RimFaultReactivation::ElementSets::Reservoir, "RESERVOIR" },
|
|
{ RimFaultReactivation::ElementSets::UnderBurden, "UNDERBURDEN" },
|
|
{ RimFaultReactivation::ElementSets::FaultZone, "FAULT_ZONE" },
|
|
};
|
|
|
|
bool useGridVoidRatio = rimModel.useGridVoidRatio();
|
|
bool useGridPorePressure = rimModel.useGridPorePressure();
|
|
bool useGridTemperature = rimModel.useGridTemperature();
|
|
bool useGridDensity = rimModel.useGridDensity();
|
|
bool useGridElasticProperties = rimModel.useGridElasticProperties();
|
|
|
|
double seaBedDepth = rimModel.seaBedDepth();
|
|
double waterDensity = rimModel.waterDensity();
|
|
double seaWaterLoad = RiaWellLogUnitTools<double>::gravityAcceleration() * seaBedDepth * waterDensity;
|
|
double frictionValue = std::tan( ( rimModel.frictionAngleDeg() / 180.0 ) * std::numbers::pi );
|
|
|
|
auto model = rimModel.model();
|
|
CAF_ASSERT( !model.isNull() );
|
|
|
|
const std::string basePath = rimModel.baseFilePath();
|
|
|
|
std::vector<std::function<std::pair<bool, std::string>()>> methods = {
|
|
[&]() { return printHeading( stream, applicationNameAndVersion ); },
|
|
[&]() { return printParts( stream, *model, partNames, borders, faces, boundaries, materialNames ); },
|
|
[&]() { return printAssembly( stream, *model, partNames, !rimModel.useLocalCoordinates(), model->modelLocalNormalsXY() ); },
|
|
[&]()
|
|
{
|
|
return printMaterials( stream, rimModel, materialNames, *dataAccess, basePath, partNames, useGridDensity, useGridElasticProperties );
|
|
},
|
|
[&]() { return printInteractionProperties( stream, frictionValue ); },
|
|
[&]() { return printBoundaryConditions( stream, *model, partNames, boundaries ); },
|
|
[&]() { return printPredefinedFields( stream, *model, *dataAccess, basePath, partNames, useGridVoidRatio, useGridTemperature ); },
|
|
[&]() { return printInteractions( stream, partNames, borders ); },
|
|
[&]()
|
|
{
|
|
return printSteps( stream,
|
|
*model,
|
|
*dataAccess,
|
|
partNames,
|
|
rimModel.selectedTimeSteps(),
|
|
basePath,
|
|
useGridPorePressure,
|
|
useGridTemperature,
|
|
seaWaterLoad );
|
|
},
|
|
};
|
|
|
|
for ( auto method : methods )
|
|
{
|
|
auto [isOk, errorMessage] = method();
|
|
if ( !isOk ) return { false, errorMessage };
|
|
}
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string> RifFaultReactivationModelExporter::exportToFile( const RimFaultReactivationModel& model )
|
|
{
|
|
std::ofstream stream( model.inputFilename() );
|
|
return exportToStream( stream, model );
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string> RifFaultReactivationModelExporter::printHeading( std::ostream& stream, const std::string& applicationNameAndVersion )
|
|
{
|
|
if ( RifInpExportTools::printHeading( stream, "Heading" ) &&
|
|
RifInpExportTools::printComment( stream, std::string( "Generated by: " ).append( applicationNameAndVersion ) ) &&
|
|
RifInpExportTools::printHeading( stream, "Preprint, echo=NO, model=NO, history=NO, contact=NO" ) )
|
|
{
|
|
return { true, "" };
|
|
}
|
|
|
|
return { false, "Failed to write header to fault reactivation INP." };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string> RifFaultReactivationModelExporter::printParts(
|
|
std::ostream& stream,
|
|
const RigFaultReactivationModel& model,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
const std::vector<std::pair<RimFaultReactivation::BorderSurface, std::string>>& borders,
|
|
const std::map<std::pair<RimFaultReactivation::GridPart, RimFaultReactivation::BorderSurface>, int>& faces,
|
|
const std::map<RimFaultReactivation::Boundary, std::string>& boundaries,
|
|
const std::map<RimFaultReactivation::ElementSets, std::string>& materialNames )
|
|
{
|
|
RifInpExportTools::printSectionComment( stream, "PARTS" );
|
|
|
|
auto parts = model.allGridParts();
|
|
for ( const auto& part : parts )
|
|
{
|
|
auto partNameIt = partNames.find( part );
|
|
CAF_ASSERT( partNameIt != partNames.end() );
|
|
std::string partName = partNameIt->second;
|
|
|
|
RifInpExportTools::printHeading( stream, "Part, name=" + partName );
|
|
|
|
auto grid = model.grid( part );
|
|
|
|
const std::vector<cvf::Vec3d>& nodes = grid->nodes();
|
|
RifInpExportTools::printNodes( stream, nodes );
|
|
|
|
const std::vector<std::vector<unsigned int>>& elements = grid->elementIndices();
|
|
RifInpExportTools::printElements( stream, elements );
|
|
|
|
RifInpExportTools::printNodeSet( stream, "ALL", 1, nodes.size(), false );
|
|
RifInpExportTools::printElementSet( stream, "ALL", 1, elements.size() );
|
|
|
|
RifInpExportTools::printNodeSet( stream, "PORE_PRESSURE", 1, nodes.size(), true );
|
|
|
|
const std::map<RimFaultReactivation::BorderSurface, std::vector<unsigned int>>& borderSurfaceElements = grid->borderSurfaceElements();
|
|
|
|
for ( auto [boundary, boundaryName] : boundaries )
|
|
{
|
|
// Create boundary condition sets for each side of the parts (except top).
|
|
const auto& boundaryNodes = grid->boundaryNodes();
|
|
const auto& boundaryElements = grid->boundaryElements();
|
|
|
|
const std::vector<unsigned int>& nodes = boundaryNodes.at( boundary );
|
|
RifInpExportTools::printNodeSet( stream, boundaryName, false, nodes );
|
|
|
|
const std::vector<unsigned int>& elements = boundaryElements.at( boundary );
|
|
RifInpExportTools::printElementSet( stream, boundaryName, false, elements );
|
|
}
|
|
|
|
for ( auto [border, borderName] : borders )
|
|
{
|
|
auto elementIt = faces.find( { part, border } );
|
|
CAF_ASSERT( elementIt != faces.end() );
|
|
int elementSide = elementIt->second;
|
|
|
|
std::string sideName = "S" + std::to_string( elementSide );
|
|
auto surfaceElements = borderSurfaceElements.find( border );
|
|
if ( surfaceElements != borderSurfaceElements.end() )
|
|
{
|
|
std::string borderElementName = "_" + borderName + "_" + sideName;
|
|
RifInpExportTools::printElementSet( stream, borderElementName, true, surfaceElements->second );
|
|
RifInpExportTools::printSurface( stream, borderName, borderElementName, sideName );
|
|
}
|
|
}
|
|
|
|
std::map<RimFaultReactivation::ElementSets, std::vector<unsigned int>> elementSets = grid->elementSets();
|
|
|
|
for ( auto [setType, elements] : elementSets )
|
|
{
|
|
auto materialNameIt = materialNames.find( setType );
|
|
CAF_ASSERT( materialNameIt != materialNames.end() );
|
|
std::string materialName = materialNameIt->second;
|
|
std::string materialSetName = materialName;
|
|
if ( elements.empty() )
|
|
{
|
|
RifInpExportTools::printComment( stream, "Section: " + materialName + " (skipped: no elements)" );
|
|
}
|
|
else
|
|
{
|
|
RifInpExportTools::printComment( stream, "Section: " + materialName );
|
|
RifInpExportTools::printElementSet( stream, materialSetName, true, elements );
|
|
RifInpExportTools::printHeading( stream, "Solid Section, elset=" + materialSetName + ", material=" + materialName );
|
|
}
|
|
}
|
|
|
|
RifInpExportTools::printLine( stream, "," );
|
|
RifInpExportTools::printHeading( stream, "End Part" );
|
|
|
|
if ( !stream.good() ) return { false, "Failed to write part " + partName + " to fault reactivation INP." };
|
|
}
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string>
|
|
RifFaultReactivationModelExporter::printAssembly( std::ostream& stream,
|
|
const RigFaultReactivationModel& model,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
bool includeTransform,
|
|
const std::pair<cvf::Vec3d, cvf::Vec3d>& transform )
|
|
{
|
|
// ASSEMBLY part
|
|
RifInpExportTools::printSectionComment( stream, "ASSEMBLY" );
|
|
RifInpExportTools::printHeading( stream, "Assembly, name=Assembly" );
|
|
|
|
auto parts = model.allGridParts();
|
|
|
|
for ( const auto& part : parts )
|
|
{
|
|
auto partNameIt = partNames.find( part );
|
|
CAF_ASSERT( partNameIt != partNames.end() );
|
|
std::string partName = partNameIt->second;
|
|
|
|
std::string instanceName = partName;
|
|
RifInpExportTools::printHeading( stream, "Instance, name=" + instanceName + ", part=" + partName );
|
|
RifInpExportTools::printHeading( stream, "End Instance" );
|
|
}
|
|
|
|
if ( includeTransform )
|
|
{
|
|
for ( const auto& part : parts )
|
|
{
|
|
auto partNameIt = partNames.find( part );
|
|
CAF_ASSERT( partNameIt != partNames.end() );
|
|
std::string partName = partNameIt->second;
|
|
|
|
RifInpExportTools::printHeading( stream, "Transform, nset=" + partName + ".ALL" );
|
|
auto [dir1, dir2] = transform;
|
|
RifInpExportTools::printNumbers( stream, { dir1.x(), dir1.y(), dir1.z(), dir2.x(), dir2.y(), dir2.z() } );
|
|
}
|
|
}
|
|
|
|
RifInpExportTools::printHeading( stream, "End Assembly" );
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string>
|
|
RifFaultReactivationModelExporter::printMaterials( std::ostream& stream,
|
|
const RimFaultReactivationModel& rimModel,
|
|
const std::map<RimFaultReactivation::ElementSets, std::string>& materialNames,
|
|
const RimFaultReactivationDataAccess& dataAccess,
|
|
const std::string& exportBasePath,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
bool densityFromGrid,
|
|
bool elasticPropertiesFromGrid )
|
|
{
|
|
// MATERIALS PART
|
|
struct Material
|
|
{
|
|
std::string name;
|
|
double density;
|
|
double youngsModulus;
|
|
double poissonNumber;
|
|
double permeability1;
|
|
double permeability2;
|
|
double expansion;
|
|
};
|
|
|
|
RifInpExportTools::printSectionComment( stream, "MATERIALS" );
|
|
std::vector<Material> materials;
|
|
|
|
for ( auto [element, materialName] : materialNames )
|
|
{
|
|
std::array<double, 4> parameters = rimModel.materialParameters( element );
|
|
|
|
// Incoming unit for Young's Modulus is GPa: convert to Pa.
|
|
double youngsModulus = RiaEclipseUnitTools::gigaPascalToPascal( parameters[0] );
|
|
|
|
// Poisson Number has no unit.
|
|
double poissonNumber = parameters[1];
|
|
|
|
// Unit is already kg/m^3
|
|
double density = parameters[2];
|
|
|
|
double expansion = parameters[3];
|
|
|
|
materials.push_back( Material{ .name = materialName,
|
|
.density = density,
|
|
.youngsModulus = youngsModulus,
|
|
.poissonNumber = poissonNumber,
|
|
.permeability1 = 1e-09,
|
|
.permeability2 = 0.3,
|
|
.expansion = expansion } );
|
|
}
|
|
|
|
for ( Material mat : materials )
|
|
{
|
|
RifInpExportTools::printHeading( stream, "Material, name=" + mat.name );
|
|
RifInpExportTools::printHeading( stream, "Density" );
|
|
if ( densityFromGrid )
|
|
{
|
|
RifInpExportTools::printLine( stream, "DENSITY" );
|
|
}
|
|
else
|
|
{
|
|
RifInpExportTools::printNumber( stream, mat.density );
|
|
}
|
|
|
|
RifInpExportTools::printHeading( stream, "Elastic" );
|
|
if ( elasticPropertiesFromGrid )
|
|
{
|
|
RifInpExportTools::printLine( stream, "ELASTICS" );
|
|
}
|
|
else
|
|
{
|
|
RifInpExportTools::printNumbers( stream, { mat.youngsModulus, mat.poissonNumber } );
|
|
}
|
|
|
|
RifInpExportTools::printHeading( stream, "Permeability, specific=1." );
|
|
RifInpExportTools::printNumbers( stream, { mat.permeability1, mat.permeability2 } );
|
|
RifInpExportTools::printHeading( stream, "Expansion" );
|
|
RifInpExportTools::printNumbers( stream, { mat.expansion } );
|
|
}
|
|
|
|
if ( densityFromGrid )
|
|
{
|
|
// Export the density to a separate inp file
|
|
std::string tableName = "DENSITY";
|
|
std::string fullPath = exportBasePath + "_" + tableName + ".inp";
|
|
auto [filePath, fileName] = RiaFilePathTools::toFolderAndFileName( QString::fromStdString( fullPath ) );
|
|
|
|
auto model = rimModel.model();
|
|
bool isOk = writePropertiesToFile( *model,
|
|
dataAccess,
|
|
{ RimFaultReactivation::Property::Density },
|
|
{ "DENSITY" },
|
|
0,
|
|
fullPath,
|
|
partNames,
|
|
tableName,
|
|
", 1." );
|
|
if ( !isOk ) return { false, "Failed to create density file." };
|
|
|
|
RifInpExportTools::printHeading( stream, "INCLUDE, input=" + fileName.toStdString() );
|
|
}
|
|
|
|
if ( elasticPropertiesFromGrid )
|
|
{
|
|
// Export the elastic properties to a separate inp file
|
|
std::string tableName = "ELASTICS";
|
|
std::string fullPath = exportBasePath + "_" + tableName + ".inp";
|
|
auto [filePath, fileName] = RiaFilePathTools::toFolderAndFileName( QString::fromStdString( fullPath ) );
|
|
|
|
auto model = rimModel.model();
|
|
bool isOk = writePropertiesToFile( *model,
|
|
dataAccess,
|
|
{ RimFaultReactivation::Property::YoungsModulus, RimFaultReactivation::Property::PoissonsRatio },
|
|
{ "MODULUS", "RATIO" },
|
|
0,
|
|
fullPath,
|
|
partNames,
|
|
tableName,
|
|
", 2." );
|
|
if ( !isOk ) return { false, "Failed to create elastic properties file." };
|
|
|
|
RifInpExportTools::printHeading( stream, "INCLUDE, input=" + fileName.toStdString() );
|
|
}
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string> RifFaultReactivationModelExporter::printInteractionProperties( std::ostream& stream, double faultFriction )
|
|
{
|
|
RifInpExportTools::printSectionComment( stream, "INTERACTION PROPERTIES" );
|
|
|
|
// Fault interaction
|
|
RifInpExportTools::printHeading( stream, "Surface Interaction, name=FAULT" );
|
|
RifInpExportTools::printNumber( stream, 1.0 );
|
|
RifInpExportTools::printHeading( stream, "Friction, slip tolerance=0.005" );
|
|
RifInpExportTools::printNumber( stream, faultFriction );
|
|
RifInpExportTools::printHeading( stream, "Surface Behavior, no separation, pressure-overclosure=HARD" );
|
|
// Non-fault interaction
|
|
RifInpExportTools::printHeading( stream, "Surface Interaction, name=NON-FAULT" );
|
|
RifInpExportTools::printNumber( stream, 1.0 );
|
|
RifInpExportTools::printHeading( stream, "Cohesive Behavior" );
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string>
|
|
RifFaultReactivationModelExporter::printBoundaryConditions( std::ostream& stream,
|
|
const RigFaultReactivationModel& model,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
const std::map<RimFaultReactivation::Boundary, std::string>& boundaries )
|
|
{
|
|
auto printBoundaryCondition = []( std::ostream& stream, const std::string& boundarySetName, const std::string& symmetryType )
|
|
{
|
|
RifInpExportTools::printHeading( stream, "Boundary" );
|
|
RifInpExportTools::printLine( stream, boundarySetName + ", " + symmetryType );
|
|
};
|
|
|
|
std::map<RimFaultReactivation::Boundary, std::string> symmetryTypes = {
|
|
{ RimFaultReactivation::Boundary::Bottom, "ZSYMM" },
|
|
{ RimFaultReactivation::Boundary::FarSide, "XSYMM" },
|
|
|
|
};
|
|
|
|
RifInpExportTools::printSectionComment( stream, "BOUNDARY CONDITIONS" );
|
|
|
|
auto parts = model.allGridParts();
|
|
|
|
for ( const auto& part : parts )
|
|
{
|
|
auto partNameIt = partNames.find( part );
|
|
CAF_ASSERT( partNameIt != partNames.end() );
|
|
std::string partName = partNameIt->second;
|
|
|
|
for ( auto [boundary, boundaryName] : boundaries )
|
|
{
|
|
std::string boundarySetName = partName + "." + boundaryName;
|
|
std::string symmetryType = symmetryTypes[boundary];
|
|
printBoundaryCondition( stream, boundarySetName, symmetryType );
|
|
}
|
|
}
|
|
|
|
std::string partSymmetry = "YSYMM";
|
|
for ( const auto& part : parts )
|
|
{
|
|
auto partNameIt = partNames.find( part );
|
|
CAF_ASSERT( partNameIt != partNames.end() );
|
|
std::string partName = partNameIt->second;
|
|
printBoundaryCondition( stream, partName + ".ALL", partSymmetry );
|
|
}
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string>
|
|
RifFaultReactivationModelExporter::printPredefinedFields( std::ostream& stream,
|
|
const RigFaultReactivationModel& model,
|
|
const RimFaultReactivationDataAccess& dataAccess,
|
|
const std::string& exportBasePath,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
bool voidRatioFromEclipse,
|
|
bool useGridTemperature )
|
|
{
|
|
// PREDEFINED FIELDS
|
|
struct PredefinedField
|
|
{
|
|
std::string initialConditionType;
|
|
std::string partName;
|
|
double value;
|
|
};
|
|
|
|
std::vector<PredefinedField> fields;
|
|
for ( auto [part, partName] : partNames )
|
|
{
|
|
std::string name = partName + ".ALL";
|
|
if ( !voidRatioFromEclipse )
|
|
{
|
|
fields.push_back( PredefinedField{ .initialConditionType = "RATIO", .partName = name, .value = 0.3 } );
|
|
}
|
|
}
|
|
|
|
RifInpExportTools::printSectionComment( stream, "INITIAL CONDITIONS" );
|
|
|
|
for ( auto field : fields )
|
|
{
|
|
RifInpExportTools::printHeading( stream, "Initial Conditions, TYPE=" + field.initialConditionType );
|
|
RifInpExportTools::printLine( stream, field.partName + ", " + std::to_string( field.value ) );
|
|
}
|
|
|
|
if ( voidRatioFromEclipse )
|
|
{
|
|
// Export the ratio to a separate inp file for each step
|
|
std::string ratioName = "RATIO";
|
|
std::string fullPath = exportBasePath + "_" + ratioName + ".inp";
|
|
auto [filePath, fileName] = RiaFilePathTools::toFolderAndFileName( QString::fromStdString( fullPath ) );
|
|
|
|
// Use void ratio from first time step
|
|
size_t timeStep = 0;
|
|
bool isOk = writePropertyToFile( model, dataAccess, RimFaultReactivation::Property::VoidRatio, timeStep, fullPath, partNames, "" );
|
|
if ( !isOk ) return { false, "Failed to create " + ratioName + " file." };
|
|
|
|
RifInpExportTools::printHeading( stream, "Initial Conditions, TYPE=" + ratioName );
|
|
RifInpExportTools::printHeading( stream, "INCLUDE, input=" + fileName.toStdString() );
|
|
}
|
|
|
|
if ( useGridTemperature )
|
|
{
|
|
// Export the temperature to a separate inp file for each step
|
|
std::string propertyName = "TEMPERATURE";
|
|
std::string fullPath = exportBasePath + "_" + propertyName + ".inp";
|
|
auto [filePath, fileName] = RiaFilePathTools::toFolderAndFileName( QString::fromStdString( fullPath ) );
|
|
|
|
// Use temperature from first time step
|
|
size_t timeStep = 0;
|
|
bool isOk = writePropertyToFile( model, dataAccess, RimFaultReactivation::Property::Temperature, timeStep, fullPath, partNames, "" );
|
|
if ( !isOk ) return { false, "Failed to create " + propertyName + " file." };
|
|
|
|
RifInpExportTools::printHeading( stream, "Initial Conditions, TYPE=" + propertyName );
|
|
RifInpExportTools::printHeading( stream, "INCLUDE, input=" + fileName.toStdString() );
|
|
}
|
|
|
|
// stress export
|
|
{
|
|
// Export the stress to a separate inp file
|
|
std::string stressName = "STRESS";
|
|
std::string fullPath = exportBasePath + "_" + stressName + ".inp";
|
|
auto [filePath, fileName] = RiaFilePathTools::toFolderAndFileName( QString::fromStdString( fullPath ) );
|
|
|
|
// Use stress from first time step
|
|
size_t timeStep = 0;
|
|
bool isOk = writePropertiesToFile( model,
|
|
dataAccess,
|
|
{ RimFaultReactivation::Property::StressTop,
|
|
RimFaultReactivation::Property::DepthTop,
|
|
RimFaultReactivation::Property::StressBottom,
|
|
RimFaultReactivation::Property::DepthBottom,
|
|
RimFaultReactivation::Property::LateralStressComponentX,
|
|
RimFaultReactivation::Property::LateralStressComponentY },
|
|
{},
|
|
timeStep,
|
|
fullPath,
|
|
partNames,
|
|
"",
|
|
"" );
|
|
|
|
if ( !isOk ) return { false, "Failed to create " + stressName + " file." };
|
|
|
|
RifInpExportTools::printHeading( stream, "Initial Conditions, TYPE=" + stressName + ", geostatic" );
|
|
RifInpExportTools::printHeading( stream, "INCLUDE, input=" + fileName.toStdString() );
|
|
}
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string> RifFaultReactivationModelExporter::printSteps( std::ostream& stream,
|
|
const RigFaultReactivationModel& model,
|
|
const RimFaultReactivationDataAccess& dataAccess,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
const std::vector<QDateTime>& timeSteps,
|
|
const std::string& exportBasePath,
|
|
bool useGridPorePressure,
|
|
bool useGridTemperature,
|
|
double seaWaterLoad )
|
|
{
|
|
// First time step has to be selected in order to export currently
|
|
if ( timeSteps.size() < 2 ) return { false, "Failed to export fault reactivation INP: needs at least two time steps." };
|
|
|
|
for ( int i = 0; i < static_cast<int>( timeSteps.size() ); i++ )
|
|
{
|
|
std::string stepNum = std::to_string( i + 1 );
|
|
std::string stepName = timeSteps[i].toString( "yyyy-MM-dd" ).toStdString();
|
|
if ( i == 0 ) stepName = "Geostatic_" + stepName;
|
|
std::string stepType = i == 0 ? "Geostatic, utol" : "Soils, utol=1.0";
|
|
|
|
RifInpExportTools::printComment( stream, "----------------------------------------------------------------" );
|
|
RifInpExportTools::printSectionComment( stream, "STEP: " + stepName );
|
|
|
|
RifInpExportTools::printHeading( stream, "Step, name=" + stepName + ", nlgeom=NO" );
|
|
|
|
RifInpExportTools::printHeading( stream, stepType );
|
|
RifInpExportTools::printNumbers( stream, { 1.0, 1.0, 1e-05, 1.0 } );
|
|
|
|
if ( i == 0 )
|
|
{
|
|
RifInpExportTools::printComment( stream, "GRAVITY LOADS FROM ROCK AND SEAWATER" );
|
|
|
|
RifInpExportTools::printHeading( stream, "Dload" );
|
|
RifInpExportTools::printLine( stream, ",GRAV, 9.80665, 0., 0., -1." );
|
|
|
|
RifInpExportTools::printComment( stream, "SEAWATER LOAD" );
|
|
|
|
for ( auto [part, partName] : partNames )
|
|
{
|
|
RifInpExportTools::printHeading( stream, "Dsload" );
|
|
std::string seaBedName = partName + "." + "SEABED";
|
|
RifInpExportTools::printLine( stream, seaBedName + ", P, " + std::to_string( seaWaterLoad ) );
|
|
}
|
|
}
|
|
|
|
if ( useGridPorePressure )
|
|
{
|
|
RifInpExportTools::printSectionComment( stream, "BOUNDARY CONDITIONS" );
|
|
|
|
// Export the pore pressure to a separate inp file for each step
|
|
std::string postfix = createFilePostfix( "PORE_PRESSURE", stepName );
|
|
std::string fullPath = exportBasePath + postfix;
|
|
auto [filePath, fileName] = RiaFilePathTools::toFolderAndFileName( QString::fromStdString( fullPath ) );
|
|
|
|
bool isOk =
|
|
writePropertyToFile( model, dataAccess, RimFaultReactivation::Property::PorePressure, i, fullPath, partNames, "8, 8, " );
|
|
if ( !isOk ) return { false, "Failed to create pore pressure file." };
|
|
|
|
RifInpExportTools::printHeading( stream, "Boundary, type=displacement" );
|
|
RifInpExportTools::printHeading( stream, "INCLUDE, input=" + fileName.toStdString() );
|
|
}
|
|
|
|
if ( useGridTemperature )
|
|
{
|
|
RifInpExportTools::printSectionComment( stream, "TEMPERATURE" );
|
|
|
|
// Export the temperature to a separate inp file for each step
|
|
std::string postfix = createFilePostfix( "TEMPERATURE", stepName );
|
|
std::string fullPath = exportBasePath + postfix;
|
|
auto [filePath, fileName] = RiaFilePathTools::toFolderAndFileName( QString::fromStdString( fullPath ) );
|
|
|
|
bool isOk = writePropertyToFile( model, dataAccess, RimFaultReactivation::Property::Temperature, i, fullPath, partNames, "" );
|
|
if ( !isOk ) return { false, "Failed to create temperature file." };
|
|
|
|
RifInpExportTools::printHeading( stream, "Temperature" );
|
|
RifInpExportTools::printHeading( stream, "INCLUDE, input=" + fileName.toStdString() );
|
|
}
|
|
|
|
RifInpExportTools::printSectionComment( stream, "OUTPUT" );
|
|
RifInpExportTools::printHeading( stream, "Output, field" );
|
|
RifInpExportTools::printHeading( stream, "Node Output" );
|
|
RifInpExportTools::printLine( stream, "COORD, POR, U" );
|
|
RifInpExportTools::printHeading( stream, "Element Output" );
|
|
RifInpExportTools::printLine( stream, "COORD, VOIDR, S, E, TEMP" );
|
|
|
|
RifInpExportTools::printComment( stream, "" );
|
|
RifInpExportTools::printHeading( stream, "Output, history, variable=PRESELECT" );
|
|
|
|
RifInpExportTools::printHeading( stream, "End Step" );
|
|
}
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
bool RifFaultReactivationModelExporter::writePropertyToFile( const RigFaultReactivationModel& model,
|
|
const RimFaultReactivationDataAccess& dataAccess,
|
|
RimFaultReactivation::Property property,
|
|
size_t outputTimeStep,
|
|
const std::string& filePath,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
const std::string& additionalData )
|
|
{
|
|
std::ofstream stream( filePath );
|
|
if ( !stream.good() ) return false;
|
|
|
|
for ( auto [part, partName] : partNames )
|
|
{
|
|
auto grid = model.grid( part );
|
|
|
|
const std::vector<cvf::Vec3d>& nodes = grid->globalNodes();
|
|
const std::vector<double> values = dataAccess.propertyValues( part, property, outputTimeStep );
|
|
if ( values.size() != nodes.size() ) return false;
|
|
|
|
for ( size_t i = 0; i < nodes.size(); i++ )
|
|
{
|
|
std::string line = partName + ".ALL." + std::to_string( i + 1 ) + ", " + additionalData + std::to_string( values[i] );
|
|
RifInpExportTools::printLine( stream, line );
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
bool RifFaultReactivationModelExporter::writePropertiesToFile( const RigFaultReactivationModel& model,
|
|
const RimFaultReactivationDataAccess& dataAccess,
|
|
const std::vector<RimFaultReactivation::Property>& properties,
|
|
const std::vector<std::string>& propertyNames,
|
|
size_t outputTimeStep,
|
|
const std::string& filePath,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
const std::string& tableName,
|
|
const std::string& heading )
|
|
{
|
|
std::ofstream stream( filePath );
|
|
if ( !stream.good() ) return false;
|
|
|
|
bool includeHeader = !propertyNames.empty();
|
|
if ( includeHeader )
|
|
{
|
|
RifInpExportTools::printHeading( stream, "Distribution Table, name=" + tableName + "_Table" );
|
|
std::string propertyNamesLine;
|
|
for ( size_t i = 0; i < propertyNames.size(); i++ )
|
|
{
|
|
propertyNamesLine += propertyNames[i];
|
|
if ( i != propertyNames.size() - 1 ) propertyNamesLine += ", ";
|
|
}
|
|
RifInpExportTools::printLine( stream, propertyNamesLine );
|
|
|
|
RifInpExportTools::printHeading( stream, "Distribution, name=" + tableName + ", location=ELEMENT, Table=" + tableName + "_Table" );
|
|
|
|
RifInpExportTools::printLine( stream, heading );
|
|
}
|
|
|
|
for ( auto [part, partName] : partNames )
|
|
{
|
|
auto grid = model.grid( part );
|
|
|
|
const std::vector<std::vector<unsigned int>>& elementIndices = grid->elementIndices();
|
|
for ( size_t i = 0; i < elementIndices.size(); i++ )
|
|
{
|
|
std::string line = partName + ".ALL." + std::to_string( i + 1 );
|
|
for ( auto property : properties )
|
|
{
|
|
const std::vector<double> values = dataAccess.propertyValues( part, property, outputTimeStep );
|
|
if ( values.size() != elementIndices.size() ) return false;
|
|
|
|
line += ", " + std::to_string( values[i] );
|
|
}
|
|
RifInpExportTools::printLine( stream, line );
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::pair<bool, std::string>
|
|
RifFaultReactivationModelExporter::printInteractions( std::ostream& stream,
|
|
const std::map<RimFaultReactivation::GridPart, std::string>& partNames,
|
|
const std::vector<std::pair<RimFaultReactivation::BorderSurface, std::string>>& borders )
|
|
{
|
|
RifInpExportTools::printSectionComment( stream, "INTERACTIONS" );
|
|
for ( const auto& [border, borderName] : borders )
|
|
{
|
|
if ( border != RimFaultReactivation::BorderSurface::Seabed )
|
|
{
|
|
RifInpExportTools::printComment( stream, "Interaction: " + borderName );
|
|
|
|
std::string interactionName = "NON-FAULT";
|
|
std::string extra;
|
|
if ( border == RimFaultReactivation::BorderSurface::FaultSurface )
|
|
{
|
|
interactionName = "FAULT";
|
|
extra = ", adjust=0.0";
|
|
}
|
|
|
|
RifInpExportTools::printHeading( stream,
|
|
"Contact Pair, interaction=" + interactionName + ", small sliding, type=SURFACE TO SURFACE" +
|
|
extra );
|
|
|
|
std::string part1Name = partNames.find( RimFaultReactivation::GridPart::FW )->second;
|
|
std::string part2Name = partNames.find( RimFaultReactivation::GridPart::HW )->second;
|
|
RifInpExportTools::printLine( stream, part1Name + "." + borderName + ", " + part2Name + "." + borderName );
|
|
}
|
|
}
|
|
|
|
return { true, "" };
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::string RifFaultReactivationModelExporter::createFilePostfix( const std::string& title, const std::string& stepName )
|
|
{
|
|
return QString( "_%1_%2.inp" ).arg( QString::fromStdString( title ) ).arg( QString::fromStdString( stepName ) ).toStdString();
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
bool RifFaultReactivationModelExporter::exportModelSettings( const RimFaultReactivationModel& rimModel )
|
|
{
|
|
auto model = rimModel.model();
|
|
|
|
if ( model.isNull() ) return false;
|
|
if ( !model->isValid() ) return false;
|
|
|
|
QMap<QString, QVariant> settings;
|
|
|
|
auto [topPosition, bottomPosition] = model->faultTopBottom();
|
|
auto faultNormal = model->modelNormal();
|
|
|
|
// make sure we export in local coordinates, if that is used
|
|
topPosition = model->transformPointIfNeeded( topPosition );
|
|
bottomPosition = model->transformPointIfNeeded( bottomPosition );
|
|
|
|
// make sure we move horizontally, and along the 2D model
|
|
faultNormal.z() = 0.0;
|
|
faultNormal.normalize();
|
|
faultNormal = faultNormal ^ cvf::Vec3d::Z_AXIS;
|
|
|
|
RimFaultReactivationTools::addSettingsToMap( settings, faultNormal, topPosition, bottomPosition );
|
|
return ResInsightInternalJson::JsonWriter::encodeFile( QString::fromStdString( rimModel.settingsFilename() ), settings );
|
|
}
|
|
|
|
//--------------------------------------------------------------------------------------------------
|
|
///
|
|
//--------------------------------------------------------------------------------------------------
|
|
std::shared_ptr<RimFaultReactivationDataAccess>
|
|
RifFaultReactivationModelExporter::extractAndExportModelData( const RimFaultReactivationModel& rimModel )
|
|
{
|
|
if ( !exportModelSettings( rimModel ) ) return nullptr;
|
|
|
|
auto eCase = rimModel.eclipseCase();
|
|
if ( eCase == nullptr ) return nullptr;
|
|
|
|
// extract data for each timestep
|
|
auto dataAccess = std::make_shared<RimFaultReactivationDataAccess>( rimModel,
|
|
eCase,
|
|
rimModel.geoMechCase(),
|
|
rimModel.selectedTimeStepIndexes(),
|
|
rimModel.stressSource() );
|
|
dataAccess->extractModelData( *rimModel.model() );
|
|
return dataAccess;
|
|
}
|