opm-common/tests/material/test_components.cpp

// -*- mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
// vi: set et ts=4 sw=4 sts=4:
/*
  This file is part of the Open Porous Media project (OPM).

  OPM is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 2 of the License, or
  (at your option) any later version.

  OPM is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with OPM.  If not, see <http://www.gnu.org/licenses/>.

  Consult the COPYING file in the top-level source directory of this
  module for the precise wording of the license and the list of
  copyright holders.
*/
/*!
 * \file
 *
 * \brief This test makes sure that mandated API is adhered to by all component classes
 */
#include "config.h"

#define BOOST_TEST_MODULE Components
#include <boost/test/unit_test.hpp>

#include <opm/material/densead/Evaluation.hpp>
#include <opm/material/densead/Math.hpp>

#include "checkComponent.hpp"

// include all components shipped with opm-material
#include <opm/material/components/Unit.hpp>
#include <opm/material/components/NullComponent.hpp>
#include <opm/material/components/Component.hpp>
#include <opm/material/components/Dnapl.hpp>
#include <opm/material/components/SimpleH2O.hpp>
#include <opm/material/components/Lnapl.hpp>
#include <opm/material/components/iapws/Region2.hpp>
#include <opm/material/components/iapws/Region1.hpp>
#include <opm/material/components/iapws/Common.hpp>
#include <opm/material/components/iapws/Region4.hpp>
#include <opm/material/components/H2O.hpp>
#include <opm/material/components/SimpleHuDuanH2O.hpp>
#include <opm/material/components/CO2.hpp>
#include <opm/material/components/Mesitylene.hpp>
#include <opm/material/components/TabulatedComponent.hpp>
#include <opm/material/components/Brine.hpp>
#include <opm/material/components/BrineDynamic.hpp>
#include <opm/material/components/N2.hpp>
#include <opm/material/components/Xylene.hpp>
#include <opm/material/components/Air.hpp>
#include <opm/material/components/SimpleCO2.hpp>
#include <opm/material/components/C1.hpp>
#include <opm/material/components/C10.hpp>
#include <opm/material/components/H2.hpp>

#include <opm/material/common/UniformTabulated2DFunction.hpp>

template <class Scalar, class Evaluation>
void testAllComponents()
{
    using H2O = Opm::H2O<Scalar>;

    checkComponent<Opm::Air<Scalar>, Evaluation>();
    checkComponent<Opm::Brine<Scalar, H2O>, Evaluation>();
    checkComponent<Opm::CO2<Scalar>, Evaluation>();
    checkComponent<Opm::C1<Scalar>, Evaluation>();
    checkComponent<Opm::C10<Scalar>, Evaluation>();
    checkComponent<Opm::DNAPL<Scalar>, Evaluation>();
    checkComponent<Opm::H2O<Scalar>, Evaluation>();
    checkComponent<Opm::H2<Scalar>, Evaluation>();
    checkComponent<Opm::LNAPL<Scalar>, Evaluation>();
    checkComponent<Opm::Mesitylene<Scalar>, Evaluation>();
    checkComponent<Opm::N2<Scalar>, Evaluation>();
    checkComponent<Opm::NullComponent<Scalar>, Evaluation>();
    checkComponent<Opm::SimpleCO2<Scalar>, Evaluation>();
    checkComponent<Opm::SimpleH2O<Scalar>, Evaluation>();
    checkComponent<Opm::TabulatedComponent<Scalar, H2O>, Evaluation>();
    checkComponent<Opm::Unit<Scalar>, Evaluation>();
    checkComponent<Opm::Xylene<Scalar>, Evaluation>();
}

using Types = std::tuple<float,double>;

BOOST_AUTO_TEST_CASE_TEMPLATE(All, Scalar, Types)
{
    using Evaluation = Opm::DenseAd::Evaluation<Scalar, 3>;

    // ensure that all components are API-compliant
    testAllComponents<Scalar, Scalar>();
    testAllComponents<Scalar, Evaluation>();
}

BOOST_AUTO_TEST_CASE_TEMPLATE(SimpleH2O, Scalar, Types)
{
    using Evaluation = Opm::DenseAd::Evaluation<Scalar, 3>;

    using H2O = Opm::H2O<Scalar>;
    using SimpleHuDuanH2O = Opm::SimpleHuDuanH2O<Scalar>;
    using EvalToolbox = Opm::MathToolbox<Evaluation>;

    int numT = 67;
    int numP = 45;
    Evaluation T = 280;

    for (int iT = 0; iT < numT; ++iT) {
        Evaluation p = 1e6;
        T += 5;
        for (int iP = 0; iP < numP; ++iP) {
            p *= 1.1;
            BOOST_CHECK_MESSAGE(EvalToolbox::isSame(H2O::liquidDensity(T,p),
                                                    SimpleHuDuanH2O::liquidDensity(T,p,false),
                                                    1e-3*H2O::liquidDensity(T,p).value()),
                                "oops: the water density based on Hu-Duan has more then 1e-3 deviation from IAPWS'97");

            if (T >= 570) // for temperature larger then 570 the viscosity based on HuDuan is too far from IAPWS.
                continue;

            BOOST_CHECK_MESSAGE(EvalToolbox::isSame(H2O::liquidViscosity(T,p),
                                                    SimpleHuDuanH2O::liquidViscosity(T,p,false),
                                                    5.e-2*H2O::liquidViscosity(T,p).value()),
                                                    "oops: the water viscosity based on Hu-Duan has more then 5e-2 deviation from IAPWS'97");
        }
    }
}

BOOST_AUTO_TEST_CASE_TEMPLATE(DynamicBrine, Scalar, Types)
{
    using Evaluation = Opm::DenseAd::Evaluation<Scalar, 3>;
    using SimpleHuDuanH2O = Opm::SimpleHuDuanH2O<Scalar>;
    using Brine = Opm::Brine<Scalar, SimpleHuDuanH2O>;
    using BrineDyn = Opm::BrineDynamic<Scalar, SimpleHuDuanH2O>;
    using EvalToolbox = Opm::MathToolbox<Evaluation>;

    Brine::salinity = 0.1;
    Evaluation sal = Brine::salinity;

    int numT = 67;
    int numP = 45;
    Evaluation T = 280;

    for (int iT = 0; iT < numT; ++iT) {
        Evaluation p = 1e6;
        T += 5;
        for (int iP = 0; iP < numP; ++iP) {
            p *= 1.1;

            BOOST_CHECK_MESSAGE(EvalToolbox::isSame(Brine::liquidDensity(T, p),
                                                    BrineDyn::liquidDensity(T, p, sal),
                                                   1e-5),
                                "oops: the brine density differs between Brine and Brine dynamic");

            BOOST_CHECK_MESSAGE(EvalToolbox::isSame(Brine::liquidViscosity(T, p),
                                                    BrineDyn::liquidViscosity(T, p, sal),
                                                    1e-5),
                                "oops: the brine viscosity differs between Brine and Brine dynamic");

            BOOST_CHECK_MESSAGE(EvalToolbox::isSame(Brine::liquidEnthalpy(T, p),
                                                    BrineDyn::liquidEnthalpy(T, p, sal),
                                                    1e-5),
                                "oops: the brine liquidEnthalpy differs between Brine and Brine dynamic");

            BOOST_CHECK_MESSAGE(EvalToolbox::isSame(Brine::molarMass(),
                                                    BrineDyn::molarMass(sal),
                                                    1e-5),
                                "oops: the brine molar mass differs between Brine and Brine dynamic");
        }
    }
}