OilfieldToolsNet/opm-simulators
4
0
Fork 0
mirror of https://github.com/OPM/opm-simulators.git synced 2024-12-25 08:41:00 -06:00
Code Issues Packages Projects Releases Wiki Activity
ed91f7528b
opm-simulators/opm/simulators/wells/GasLiftSingleWell.hpp

75 lines
2.5 KiB
C++
Raw Normal View History

Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
/*
Copyright 2020 Equinor ASA.
This file is part of the Open Porous Media project (OPM).
OPM is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OPM is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OPM. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef OPM_GASLIFT_SINGLE_WELL_HEADER_INCLUDED
#define OPM_GASLIFT_SINGLE_WELL_HEADER_INCLUDED
GasLiftStage2: no longer a need to template on TypeTag
2021-05-25 05:00:24 -05:00
#include <opm/models/utils/propertysystem.hh>
#include <opm/models/utils/parametersystem.hh>
#include <opm/models/discretization/common/fvbaseproperties.hh>
GasLiftSingleWell: split typetag independent code to separate class
2021-05-20 07:20:27 -05:00
#include <opm/simulators/wells/GasLiftSingleWellGeneric.hpp>
Check group limits in gas lift stage 1. Check group limits in gas lift stage 1 to avoid adding too much ALQ which must anyway later be removed in stage 2. This should make the optimization more efficient for small ALQ increment values. Also adds MPI support.
2021-05-27 01:31:49 -05:00
#include <opm/simulators/wells/GasLiftGroupInfo.hpp>
Add gaslift optimization support for MSW. Implements gas lift optimization support for multisegmented wells (MSW).
2022-02-07 04:28:35 -06:00
#include <opm/simulators/wells/WellInterface.hpp>
Potentially reduce gaslift when under well is under group control Current implemention only support ORAT and GRAT controlled groups
2021-06-23 08:46:33 -05:00
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
#include <optional>
#include <vector>
#include <utility>
namespace Opm
{
template<class TypeTag>
GasLiftSingleWell: split typetag independent code to separate class
2021-05-20 07:20:27 -05:00
class GasLiftSingleWell : public GasLiftSingleWellGeneric
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
{
using Simulator = GetPropType<TypeTag, Properties::Simulator>;
Check group limits in gas lift stage 1. Check group limits in gas lift stage 1 to avoid adding too much ALQ which must anyway later be removed in stage 2. This should make the optimization more efficient for small ALQ increment values. Also adds MPI support.
2021-05-27 01:31:49 -05:00
using GLiftSyncGroups = typename GasLiftSingleWellGeneric::GLiftSyncGroups;
GasLiftSingleWell: split typetag independent code to separate class
2021-05-20 07:20:27 -05:00
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
public:
GasLiftSingleWell(
Rename some methods and variables. Renames some methods and variables to reflect that the well is no longer necessarily a StandardWell. It can be either a MultisegmentWell or a StandardWell. This should avoid confusion about the nature of the variable.
2022-02-15 03:21:09 -06:00
const WellInterface<TypeTag> &well,
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
const Simulator &ebos_simulator,
const SummaryState &summary_state,
DeferredLogger &deferred_logger,
Check group limits in gas lift stage 1. Check group limits in gas lift stage 1 to avoid adding too much ALQ which must anyway later be removed in stage 2. This should make the optimization more efficient for small ALQ increment values. Also adds MPI support.
2021-05-27 01:31:49 -05:00
WellState &well_state,
Potentially reduce gaslift when under well is under group control Current implemention only support ORAT and GRAT controlled groups
2021-06-23 08:46:33 -05:00
const GroupState& group_state,
Check group limits in gas lift stage 1. Check group limits in gas lift stage 1 to avoid adding too much ALQ which must anyway later be removed in stage 2. This should make the optimization more efficient for small ALQ increment values. Also adds MPI support.
2021-05-27 01:31:49 -05:00
GasLiftGroupInfo &group_info,
Improve debugging tools in gaslift code. Introduces a gaslift debugging variable in ALQState in WellState. This variable will persist between timesteps in contrast to when debugging variables are defined in GasLiftSingleWell, GasLiftGroupState, or GasLiftStage2. Currently only an integer variable debug_counter is added to ALQState, which can be used as follows: First debugging is switched on globally for BlackOilWellModel, GasLiftSingleWell, GasLiftGroupState, and GasLiftStage2 by setting glift_debug to a true value in BlackOilWellModelGeneric. Then, the following debugging code can be added to e.g. one of GasLiftSingleWell, GasLiftGroupState, or GasLiftStage2 : auto count = debugUpdateGlobalCounter_(); if (count == some_integer) { displayDebugMessage_("stop here"); } Here, the integer "some_integer" is determined typically by looking at the debugging output of a previous run. This can be done since the call to debugUpdateGlobalCounter_() will print out the current value of the counter and then increment the counter by one. And it will be easy to recognize these values in the debug ouput. If you find a place in the output that looks suspect, just take a note of the counter value in the output around that point and insert the value for "some_integer", then after recompiling the code with the desired value for "some_integer", it is now easy to set a breakpoint in GDB at the line displayDebugMessage_("stop here"). shown in the above snippet. This should improve the ability to quickly to set a breakpoint in GDB around at a given time and point in the simulation.
2022-01-23 13:37:26 -06:00
GLiftSyncGroups &sync_groups,
Cleanup glift debugging output code
2022-03-24 06:42:46 -05:00
const Parallel::Communication& comm,
Improve debugging tools in gaslift code. Introduces a gaslift debugging variable in ALQState in WellState. This variable will persist between timesteps in contrast to when debugging variables are defined in GasLiftSingleWell, GasLiftGroupState, or GasLiftStage2. Currently only an integer variable debug_counter is added to ALQState, which can be used as follows: First debugging is switched on globally for BlackOilWellModel, GasLiftSingleWell, GasLiftGroupState, and GasLiftStage2 by setting glift_debug to a true value in BlackOilWellModelGeneric. Then, the following debugging code can be added to e.g. one of GasLiftSingleWell, GasLiftGroupState, or GasLiftStage2 : auto count = debugUpdateGlobalCounter_(); if (count == some_integer) { displayDebugMessage_("stop here"); } Here, the integer "some_integer" is determined typically by looking at the debugging output of a previous run. This can be done since the call to debugUpdateGlobalCounter_() will print out the current value of the counter and then increment the counter by one. And it will be easy to recognize these values in the debug ouput. If you find a place in the output that looks suspect, just take a note of the counter value in the output around that point and insert the value for "some_integer", then after recompiling the code with the desired value for "some_integer", it is now easy to set a breakpoint in GDB at the line displayDebugMessage_("stop here"). shown in the above snippet. This should improve the ability to quickly to set a breakpoint in GDB around at a given time and point in the simulation.
2022-01-23 13:37:26 -06:00
bool glift_debug
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
);
Rename some methods and variables. Renames some methods and variables to reflect that the well is no longer necessarily a StandardWell. It can be either a MultisegmentWell or a StandardWell. This should avoid confusion about the nature of the variable.
2022-02-15 03:21:09 -06:00
const WellInterfaceGeneric &getWell() const override { return well_; }
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
private:
Fix bug when recalculating gaslift gradient Fixes a bug in recalculateGradientAndUpdateData_() if gaslift stage2. Also adds some more debugging output.
2023-03-02 01:23:15 -06:00
std::optional<double> computeBhpAtThpLimit_(double alq, bool debug_ouput=true) const override;
Cleanup code in GasLiftSingleWellGeneric Introduces two new data types BasicRates and LimitedRates to capture oil, gas, and water rates, and whether they have been limited by well or group targets. This reduces the number of variables that are passed to and returned from various methods and thus makes the code easier to read.
2022-01-25 15:05:46 -06:00
BasicRates computeWellRates_(
double bhp, bool bhp_is_limited, bool debug_output=true) const override;
adapt to renamed GasLift(Group|Well)
2023-01-09 06:50:05 -06:00
void setAlqMaxRate_(const GasLiftWell& well);
Gas lift optimization for two-phase oil-water. Add gas lift optimization support for two-phase oil-water flow.
2022-02-17 02:15:56 -06:00
void setupPhaseVariables_();
Allow for gaslift for wells that violate thp limit but are not allowed to switch
2022-09-02 05:11:39 -05:00
bool checkThpControl_() const override;
GasLiftSingleWell: split typetag independent code to separate class
2021-05-20 07:20:27 -05:00
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
const Simulator &ebos_simulator_;
Rename some methods and variables. Renames some methods and variables to reflect that the well is no longer necessarily a StandardWell. It can be either a MultisegmentWell or a StandardWell. This should avoid confusion about the nature of the variable.
2022-02-15 03:21:09 -06:00
const WellInterface<TypeTag> &well_;
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
};
} // namespace Opm
GasLiftSingleWell: split typetag independent code to separate class
2021-05-20 07:20:27 -05:00
#include "GasLiftSingleWell_impl.hpp"
Implements gas lift optimization for groups. Extends PR #2824 to include support for GLIFTOPT (item 2, maximum lift gas supply for a group) and group production constraints. The optimization is split into two phases. First the wells are optimized separately (as in PR #2824). In this phase LIFTOPT and WLIFTOPT constraints (e.g. maxmimum lift gas injection for a well, minimum economic gradient) are considered together with well production constraints. Then, in the next phase the wells are optimized in groups. Here, the ALQ distribution from the first phase is used as a starting point. If a group has any production rate constraints, and/or a limit on its total rate of lift gas supply, lift gas is redistributed to the wells that gain the most benefit from it by considering which wells that currently has the largest weighted incremental gradient (i.e. increase in oil rate compared to increase in ALQ).
2021-03-03 06:59:26 -06:00
#endif // OPM_GASLIFT_SINGLE_WELL_HEADER_INCLUDED
Reference in New Issue Copy Permalink