Bård Skaflestad
e288a61c59
Merge pull request #5894 from totto82/gsatprod
...
Implement gsatprod
2025-01-22 14:17:22 +01:00
Tor Harald Sandve
f9d6644197
add gsatprod to group rates
2025-01-22 12:55:44 +01:00
Vegard Kippe
554967005b
Do not try to restore segment info for inactive wells
2025-01-10 18:45:53 +01:00
Vegard Kippe
60d738bc1c
Allow query for efficiency scaling factor in off-process wells where required
2024-12-19 13:31:52 +01:00
Lisa Julia Nebel
6bdb80126f
Add parameter enableDistributedWells to the well state an when set to true, do not throw when initalizing distributed multi-segment wells in WellState.cpp
2024-11-22 15:16:00 +01:00
Kai Bao
588b8215f2
Merge pull request #5680 from lisajulia/feature/ms-wells
...
Feature/ms wells - part 1: Initial assembly of B C D and the residual
2024-11-21 22:54:48 +01:00
Lisa Julia Nebel
655f4011c7
Calculate the segment rates of the well state correctly, i.e. sum when the well is distributed over multiple processes
2024-11-21 16:09:10 +01:00
Vegard Kippe
673d541932
Earlier continue and rename vector
2024-11-20 16:25:38 +01:00
Vegard Kippe
e189d56167
Explicit check for inactive wells and throw if trying to initialize a distributed multi-segment well
2024-11-20 15:40:18 +01:00
Vegard Kippe
ca36f5b2a6
Support ALQ in network calculations and avoid adding gas lift of closed wells
2024-09-19 23:43:16 +02:00
Vegard Kippe
0320a14eed
Avoid expensive schedule.getWells() call and also update BlackoilWellModel_impl.hpp to use new signature of updateWellsDefaultALQ
2024-08-15 21:04:04 +02:00
Tor Harald Sandve
5f8916c0c3
Use cell temperature in perforated cell to compute reservoir rates
2024-08-01 11:14:29 +02:00
Bård Skaflestad
26cd7ab993
Move opm/core/props to opm/simulators/utils
...
The opm/core directory is no longer meaningful, and it contains only
components which might collectively be described as simulator
utilities.
2024-06-25 12:22:09 +02:00
Arne Morten Kvarving
16f5290038
ParallelWellInfo: template Scalar type
2024-05-22 09:48:22 +02:00
Arne Morten Kvarving
81189b89c7
PerforationData: template Scalar type
2024-05-22 09:48:07 +02:00
Arne Morten Kvarving
be57843296
WellState: template Scalar type
2024-04-17 11:12:40 +02:00
Arne Morten Kvarving
58f334b264
ALQState: template Scalar type
2024-04-17 11:12:40 +02:00
Arne Morten Kvarving
ab0e696709
SingleWellState: template Scalar type
2024-04-17 11:12:40 +02:00
Arne Morten Kvarving
a6cb9134ff
WellState: remove template parameters for comm
...
use Parallel::Communication directly instead
2024-04-17 09:37:04 +02:00
Vegard Kippe
55067636f4
Ensuring that the UDA is updated every time step, not just only report step.
2023-12-01 19:44:09 +01:00
Vegard Kippe
69f82f1104
Allow using UDQ for WCONPROD item 12 (ALQ)
2023-12-01 13:21:34 +01:00
Arne Morten Kvarving
92fa9577da
consistently use std::size_t
2023-08-15 09:32:10 +02:00
Arne Morten Kvarving
72133deadc
added: support for loading serialized state from .OPMRST file
2023-02-16 13:48:36 +01:00
Arne Morten Kvarving
b7a531b93a
WellState: add serialization support
2023-02-16 09:43:39 +01:00
Arne Morten Kvarving
df181f2200
WellState.hpp: remove unnecessary Well.hpp include
...
forward WellStatus
2023-01-18 11:24:25 +01:00
Bård Skaflestad
936e9e87e7
Convey More Dynamic State Values per Segment to Output Layer
...
In particular, report local condition segment flow velocities,
segment holdup fractions, and segment phase viscosities.
2022-11-17 11:49:29 +01:00
Håkon Hægland
4970b0641e
Improve debugging tools in gaslift code.
...
Introduces a gaslift debugging variable in ALQState in WellState. This
variable will persist between timesteps in contrast to when debugging
variables are defined in GasLiftSingleWell, GasLiftGroupState, or GasLiftStage2.
Currently only an integer variable debug_counter is added to ALQState,
which can be used as follows: First debugging is switched on globally
for BlackOilWellModel, GasLiftSingleWell, GasLiftGroupState, and
GasLiftStage2 by setting glift_debug to a true value in BlackOilWellModelGeneric.
Then, the following debugging code can be added to e.g. one of
GasLiftSingleWell, GasLiftGroupState, or GasLiftStage2 :
auto count = debugUpdateGlobalCounter_();
if (count == some_integer) {
displayDebugMessage_("stop here");
}
Here, the integer "some_integer" is determined typically by looking at
the debugging output of a previous run. This can be done since the
call to debugUpdateGlobalCounter_() will print out the current value
of the counter and then increment the counter by one. And it will be
easy to recognize these values in the debug ouput. If you find a place
in the output that looks suspect, just take a note of the counter
value in the output around that point and insert the value for
"some_integer", then after recompiling the code with the desired value
for "some_integer", it is now easy to set a breakpoint in GDB at the
line
displayDebugMessage_("stop here").
shown in the above snippet. This should improve the ability to quickly
to set a breakpoint in GDB around at a given time and point in the simulation.
2022-01-23 20:37:26 +01:00
Joakim Hove
6b92443cb4
Downstream filesystem reorganisation in opm-common
2022-01-02 14:33:34 +01:00
Bård Skaflestad
2971a3f051
Merge pull request #3659 from joakim-hove/refactor-wellstate-init
...
Refactor wellstate init
2021-11-03 13:16:34 +01:00
Joakim Hove
05317e1d72
Extract functionality to update target rates to SingleWellState
2021-11-03 12:30:40 +01:00
Joakim Hove
53dba36513
Move resetConnectionFactor to SingleWellState
2021-11-03 12:30:40 +01:00
Joakim Hove
ec780676e2
Split initSinglewell for producer and injector
2021-11-01 16:02:34 +01:00
Joakim Hove
129288b2bd
Add operator[] to WellState
2021-11-01 13:47:40 +01:00
Joakim Hove
c8cbd32f85
Add method WellContainer<T>::wells()
2021-10-19 11:16:41 +02:00
Elyes Ahmed
f53c597f90
Replacing use of MPI_COMM_WORLD with a variable communicator.
2021-10-05 13:07:52 +02:00
Joakim Hove
122678e5ea
Remove unused function argument
2021-10-01 08:34:58 +02:00
Joakim Hove
2f94f0436b
Remove irrelevant private functions
2021-10-01 08:34:27 +02:00
Joakim Hove
38d327b447
Add Some documentation to WellState
2021-10-01 08:26:41 +02:00
Joakim Hove
3aaaa23ed1
Implement connection rate summation in SingleWellState
2021-09-28 23:45:40 +02:00
Joakim Hove
86a0662381
Use std::reference_wrapper<> for parallel well info
2021-09-28 21:42:57 +02:00
Joakim Hove
cf340644b2
Add ParallelWellInfo member to SingleWellState
2021-09-28 21:42:57 +02:00
Joakim Hove
ef12186d78
Remove unused query/switch code for GLO - it is always on
2021-09-27 14:11:54 +02:00
Tor Harald Sandve
30592c7593
update status after WTEST
2021-09-21 10:32:56 +02:00
Joakim Hove
5a721b8cd2
Remove WellMap from WellState
2021-08-24 13:25:02 +02:00
Joakim Hove
579aba8d08
Include perforation data in SingleWellState
2021-08-24 12:46:24 +02:00
Joakim Hove
8b652c821b
Use SingleWellState for reservoir rates
2021-08-24 12:46:24 +02:00
Joakim Hove
755de65eb4
Use SingleWellState to manage well surface rates
2021-08-24 12:46:24 +02:00
Joakim Hove
8937c9cba9
Refactor sumWellRates to accept bool argument
2021-08-24 12:46:24 +02:00
Joakim Hove
77a9fd352b
Add SegmentState member to SingleWellState
2021-08-23 13:17:24 +02:00
Joakim Hove
67bd2fd333
Add productivity_index to SingleWellState
2021-08-23 12:05:26 +02:00
