/*
Copyright 2021 Equinor.
This file is part of the Open Porous Media project (OPM).
OPM is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OPM is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OPM. If not, see .
*/
#if HAVE_CONFIG_H
#include "config.h"
#endif // HAVE_CONFIG_H
#include
using namespace Opm::KeywordValidation;
namespace Opm::FlowKeywordValidation
{
template <>
const PartiallySupportedKeywords&
partiallySupported()
{
static const PartiallySupportedKeywords partially_supported_keywords_strings = {
{
"BRANPROP",
{
{5,{true, allow_values {"NONE"}, "BRANPROP(ALQ-DEN): option is not supported. Default is supported."}}, // ALQ_SURFACE_DENSITY
},
},
{
"EDITNNC",
{
{12,{true, allow_values {"NONE"}, "EDITNNC(FACE1): not supported use default."}}, // FACE_FLOW12
{13,{true, allow_values {"NONE"}, "EDITNNC(FACE2): not supported use default."}}, // FACE_FLOW21
},
},
{
"EHYSTR",
{
{5,{true, allow_values {"KR", "PC", "BOTH"}, "EHYSTR(HYSTOPT): relative permeability hysteresis option should equal BOTH, KR, or PC"}}, // limiting_hyst_flag
{6,{true, allow_values {"RETR"}, "EHYSTR(HYSTSCAN): only RETR supported"}}, // shape_cap_press_flag
{7,{false, allow_values {"DRAIN"}, "EHYSTR(HYSTMOB): mobility option not supported and is ignored"}}, // init_fluid_mob_flag
{8,{false, allow_values {"OIL"}, "EHYSTR(HYSTWET): only OIL supported value is ignored"}}, // wetting_phase_flag
{9,{false, allow_values {"NO"}, "EHYSTR(HYBAKOIL): not used and is ignored"}}, // baker_flag_oil
{10,{false, allow_values {"NO"}, "EHYSTR(HYBAKGAS): not used and is ignored"}}, // baker_flag_gas
{11,{false, allow_values {"NO"}, "EHYSTR(HYBAKWAT): not used and is ignored"}}, // baker_flag_water
},
},
{
"ENDSCALE",
{
{1,{true, allow_values {"NODIR"}, "ENDSCALE(DIRECT): only default value of NODIR supported"}}, // DIRECT
{2,{true, allow_values {"REVERS"}, "ENDSCALE(IRREVERS): only default value of REVERS supported"}}, // IRREVERS
},
},
{
"EQLOPTS",
{
{1,{true, allow_values {"THPRES"}, "EQLOPTS(MOBILE/QUIESC/IRREVER): options not supported"}}, // OPTION1
{2,{true, allow_values {"THPRES"}, "EQLOPTS(MOBILE/QUIESC/IRREVER): options not supported"}}, // OPTION2
{3,{true, allow_values {"THPRES"}, "EQLOPTS(MOBILE/QUIESC/IRREVER): options not supported"}}, // OPTION3
{4,{true, allow_values {"THPRES"}, "EQLOPTS(MOBILE/QUIESC/IRREVER): options not supported"}}, // OPTION4
},
},
{
"FOAMOPTS",
{
{1,{true, allow_values {"GAS"}, "FOAMOPTS(FOAMOPT1): only the default option of GAS is supported"}}, // TRANSPORT_PHASE
{2,{true, allow_values {"TAB"}, "FOAMOPTS(FOAMOPT2): only the default option of TAB is supported"}}, // MODEL
},
},
{
"FAULTS",
{
{1, {false, [](const std::string& val){ return val.size()<=8;},
"FAULTS(FLTNAME): Only names of faults up to 8 characters are supported. Will ignore excess characters."
}
},},
},
{
"GCONINJE",
{
{10,{true, allow_values {"RATE", "NETV", "RESV", "VOID"}, "GCONINJE(GUIPHASE): only RATE/NETV/RESV/VOID are supported - will STOP"}}, // GUIDE_RATE_DEF
},
},
{
"GCONPROD",
{
{2,{true, allow_values {"NONE", "FLD", "ORAT", "WRAT", "GRAT", "LRAT", "RESV"}, "GCONPROD(TARGET): valid option should be NONE/FLD/ORAT/WRAT/GRAT/LRAT or RESV"}}, // CONTROL_MODE
{11,{true, allow_values {"NONE"}, "GCONPROD(ACTWAT): water violation procedure not implemented, item should be defaulted"}}, // WATER_EXCEED_PROCEDURE
{12,{true, allow_values {"NONE"}, "GCONPROD(ACTGAS): gas violation procedure not implemented, item should be defaulted"}}, // GAS_EXCEED_PROCEDURE
{13,{true, allow_values {"NONE"}, "GCONPROD(ACTLIQ): liquid violation procedure not implemented, item should be defaulted"}}, // LIQUID_EXCEED_PROCEDURE
{21,{true, allow_values {"NONE"}, "GCONPROD(COMBPROC): linearly combined procedure is not used and should be defaulted (1*)"}}, // LIN_TARGET_EXCEED_PROCEDURE
},
},
{
"GEFAC",
{
{3,{true, allow_values {"YES"}, "GEFAC(GRPNETWK): Extended Network Model efficiency NO option not implemented"}}, // TRANSFER_EXT_NET
},
},
{
"GRIDOPTS",
{
{1,{true, allow_values {"NO", "YES"}, "GRIDOPTS(TRANMULT): should be set to either NO or YES"}}, // TRANMULT
},
},
{
"GUIDERAT",
{
{2,{true, allow_values {"OIL", "LIQ", "GAS", "RES", "NONE"}, "GUIDERAT(PHASE): unsupported option must be OIL LIQ GAS RES or NONE"}}, // NOMINATED_PHASE
{9,{true, allow_values {"YES"}, "GUIDERAT(GROPT01): only the default option of YES is supported"}}, // ALLOW_INCREASE
},
},
{
"MISCIBLE",
{
{3,{true, allow_values {"NONE"}, "MISCIBLE(MISOPT): only option NONE is supported"}}, // TWOPOINT
},
},
{
"MULTFLT",
{
{1, {false, [](const std::string& val){ return val.size()<=8;},
"MLTFLT(FLTNAME): Only names of faults up to 8 characters are supported. Will ignore excess characters."
}
},
},
},
{
"MULTIREG",
{
{4,{true, allow_values {"F", "M", "O"}, "MULTIREG(REGION_NAME): must equal to F/M or O"}}, // NOT_DEFINED
},
},
{
"MULTREGP",
{
{3,{true, allow_values {"F", "M", "O"}, "MULTREGP(REGION_NAME): must equal to F/M or O"}}, // REGION_TYPE
},
},
{
"MULTREGT",
{
{6,{true, allow_values {"F", "M", "O"}, "MULTREGT(REGION_NAME): must equal to F/M or O"}}, // REGION_DEF
},
},
{
"NNC",
{
{12,{true, allow_values {}, "NNC(FACE1): not supported use 1*."}}, // VE_FACE1
{13,{true, allow_values {}, "NNC(FACE2): not supported use 1*."}}, // VE_FACE2
},
},
{
"NODEPROP",
{
{6,{true, allow_values {}, "NODEPROP(GRPNAME): not supported use default"}}, // SOURCE_SINK_GROUP
{7,{true, allow_values {}, "NODEPROP(NETTYPE): not supported use default"}}, // NETWORK_VALUE_TYPE
},
},
{
"PINCH",
{
{2,{true, allow_values {"GAP"}, "PINCH(PINCHOPT) equal to NOGAP is not supported."}},
},
},
{
"RESTART",
{
{3,{true, allow_values {}, "RESTART(RSTYPE): restart from SAVE file not supported"}}, // SAVEFILE
{4,{true, allow_values {"UNFORMATTED"}, "RESTART(RSFORMAT): restart from SAVE file not supported"}}, // SAVEFILE_FORMAT
},
},
{
"ROCKCOMP",
{
{1,{true, allow_values {"REVERS", "IRREVERS"}, "ROCKCOMP(ROCKOPT): only the REVERS and IRREVERS options are supported – will STOP"}}, // HYSTERESIS
{3,{true, allow_values {"YES", "NO"}, "ROCKCOMP(WATINOPT): only YES and NO are supported"}}, // WATER_COMPACTION
{4,{false, allow_values {}, "ROCKCOMP(PORTXROP): transmissibility dependent on porosity model is not supported"}}, // PORTXROP
},
},
{
"ROCKOPTS",
{
{1,{true, allow_values {"PRESSURE"}, "ROCKOPTS: only the PRESSURE options are supported"}},
{2,{true, allow_values {"NOSTORE"}, "ROCKOPTS: only the NOSTORE options are supported"}},
{3,{true, allow_values {"PVTNUM", "ROCKNUM"}, "ROCKOPTS: only PVTNUM and ROCKNUM are supported"}},
},
},
{
"RPTRST",
{
{1,{false, allow_values {"ALLPROPS", "BASIC=1", "BASIC=2", "BASIC=3", "BASIC=4", "BASIC=5", "BASIC=6", "DEN", "KRG", "KRO", "KRW", "RSSAT", "RVSAT", "VISC"}, "RPTRST(RPTRST): invalid option or unsupported integer control format"}}, // MNEMONIC_LIST
},
},
{
"SATOPTS",
{
{1,{true, allow_values {"HYSTER", "DIRECT"}, "SATOPTS(IRREVERS/SURFTENS): options not supported"}}, // IRREVERS
{2,{true, allow_values {"HYSTER", "DIRECT"}, "SATOPTS(IRREVERS/SURFTENS): options not supported"}}, // IRREVERS
{3,{true, allow_values {"HYSTER", "DIRECT"}, "SATOPTS(IRREVERS/SURFTENS): options not supported"}}, // IRREVERS
{4,{true, allow_values {"HYSTER", "DIRECT"}, "SATOPTS(IRREVERS/SURFTENS): options not supported"}}, // IRREVERS
},
},
{
"SPECGRID",
{
{5,{true, allow_values {"F"}, "SPECGRID(TYPE): only option F (Cartesian grids supported) supported"}}, // COORD_TYPE
},
},
{
"TABDIMS",
{
{20,{false, allow_values {}, "TABDIMS(NOTUSED): should be defaulted (1*) - ignored as not used"}}, // ITEM20_NOT_USED
{25,{false, allow_values {}, "TABDIMS(RESVED): should be defaulted (1*) - ignored as not used"}}, // RESERVED
},
},
{
"THPRESFT",
{
{1, {false, [](const std::string& val){ return val.size()<=8;},
"THPRESFT(FLTNAME): Only names of faults up to 8 characters are supported. Will ignore excess characters."
}
},
},
},
{
"TRACER",
{
{1,{true, [](const std::string& val){ return val.size()<=3;}, "TRACER(NAME): Only names of tracers up to 3 characters are supported."}},
{4,{true, allow_values {}, "TRACER(SOLPHASE): partitioned tracer model not supported use default"}}, // SOLUTION_PHASE
{6,{true, allow_values {}, "TRACER(ADSPHASE): partitioned tracer model not supported use default"}}, // ADSORB_PHASE
},
},
{
"TRACERS",
{
{5,{true, allow_values {"NODIFF"}, "TRACERS(DIFFOPT): numerical diffusion control for tracers not implemented."}}, // NUMERIC_DIFF
{8,{true, allow_values {"NO"}, "TRACERS(NONLIN): only linear option NO supported"}}, // PASSIVE_NONLINEAR
},
},
{
"UDQDIMS",
{
{11,{true, allow_values {"N"}, "UDQDIMS(RSEED): option is not supported use default"}}, // RESTART_NEW_SEED
},
},
{
"WCONHIST",
{
{3,{true, allow_values {"ORAT", "WRAT", "GRAT", "LRAT", "RESV", "BHP"}, "WCONHIST(TARGET): should be set to ORAT/WRAT/GRAT/LRAT/RESV or BHP"}}, // CMODE
},
},
{
"WEFAC",
{
{3,{true, allow_values {"YES"}, "WEFAC(WELNETWK): only the YES option is supported"}}, // EXTENDED_NETWORK_OPT
},
},
{
"WELSPECS",
{
{8,{true, allow_values {"STD", "NO"}, "WELSPECS(WELNETWK): only the STD and NO options are supported"}}, // INFLOW_EQ
{12,{true, allow_values {"SEG"}, "WELSPECS(DENOPT): only the SEG option is supported"}}, // DENSITY_CALC
{14,{true, allow_values {}, "WELSPECS(STRMLIN1): not used and should be defaulted"}}, // FRONTSIM1
{15,{true, allow_values {}, "WELSPECS(STRMLIN2): not used and should be defaulted"}}, // FRONTSIM2
{16,{true, allow_values {"STD"}, "WELSPECS(TYPECOMP): not used and should be defaulted"}}, // well_model
},
},
{
"WELTARG",
{
{2,{true, allow_values {"ORAT", "WRAT", "GRAT", "LRAT", "RESV", "BHP", "THP", "VFP", "LIFT", "GUID"}, "WELTARG(TARGET): invalid option"}}, // CMODE
},
},
{
"WGRUPCON",
{
{4,{true, allow_values {"OIL", "WAT", "GAS", "LIQ", "RES", "RAT"}, "WGRUPCON(TARGET): only OIL WAT GAS LIQ RES RAT options are supported"}}, // PHASE
},
},
{
"WHISTCTL",
{
{2,{true, allow_values {"NO"}, "WHISTCTL(END): only the NO option is supported"}}, // BPH_TERMINATE
},
},
{
"WLIFTOPT",
{
{7,{true, allow_values {"NO"}, "WLIFTOPT(OPTLIMIT): only the default NO option is supported"}}, // ALLOCATE_EXTRA_LIFT_GAS
},
},
{
"WTEST",
{
{3,{true, allow_values {"E", "P", "EP", "PE", ""}, "WTEST(TEST): only the E (economic) and P (physical) reason is currently supported"}}, // REASON
},
},
{
"WVFPEXP",
{
{5,{false, allow_values {"WG"}, "WVFPEXP(EXTRAP): only linear extrapolation is support "}}, // EXTRAPOLATION_CONTROL
},
},
};
return partially_supported_keywords_strings;
}
template <>
const KeywordValidation::PartiallySupportedKeywords&
partiallySupported()
{
static const KeywordValidation::PartiallySupportedKeywordspartially_supported_keywords_int = {
{
"EDITNNC",
{
{8,{true, allow_values {0}, "EDITNNC(ISATNUM1): only default value of 0 supported"}}, // SAT_TABLE12
{9,{true, allow_values {0}, "EDITNNC(ISATNUM2): only default value of 0 supported"}}, // SAT_TABLE21
{10,{true, allow_values {0}, "EDITNNC(IPRSNUM1): only default value of 0 supported"}}, // PRESS_TABLE12
{11,{true, allow_values {0}, "EDITNNC(IPRSNUM2): only default value of 0 supported"}}, // PRESS_TABLE21
},
},
{
"EHYSTR",
{
{2,{true, allow_values {0, 1, 2, 3}, "EHYSTR(HYSTMOD): only Carlson or Killough Hysteresis Models supported (0,1 or 2,3)"}}, // relative_perm_hyst
{13,{true, allow_values {0}, "EHYSTR(HYSWETRP): Killough’s option not supported and should be defaulted"}}, // FLAG_SOMETHING
},
},
{
"ENDSCALE",
{
{3,{false, allow_values {1}, "ENDSCALE(NTENDP): depth end-point scaling not supported – value ignored"}}, // NTENDP
{4,{false, allow_values {20}, "ENDSCALE(NNODES): depth end-point scaling not supported – value ignored"}}, // NSENDP
{5,{true, allow_values {0}, "ENDSCALE(MODE): depth temperature end-point scaling not supported"}}, // COMP_MODE
},
},
{
"EQLDIMS",
{
{4,{true, allow_values {1}, "EQLDIMS(NTTRVD): tracer regions (TNUM) not supported. This item should be defaulted to 1."}}, // NTTRVD
},
},
{
"EQUIL",
{
{9,{true, [](int x) { return x >= -20 && x <= 0; }, "EQUIL(EQLOPT3): only values less than or equal to zero are supported (default is -5)"}}, // OIP_INIT
{10,{false, allow_values {}, "EQUIL(EQLOPT4): compositional option not used, should be defaulted"}}, // EQLOPT4
{11,{false, allow_values {}, "EQUIL(EQLOPT5): compositional option not used, should be defaulted"}}, // EQLOPT5
},
},
{
"FOAMROCK",
{
{1,{true, allow_values {1}, "FOAMROCK(ADINDX): only the default(1) value is supported"}}, // ADSORPTION_INDEX
},
},
{
"GRIDFILE",
{
{1,{false, allow_values {0}, "GRIDFILE(NGRID): output of GRID file is not supported."}}, // GRID
{2,{false, allow_values {0,1}, "GRIDFILE(NEGRID): only generate (1) or not (0) an EGRID file is supported."}}, // EGRID
},
},
{
"MESSAGES",
{
{7,{false, allow_values {1000000}, "MESSAGES(STOPMESG): option is not supported"}}, // MESSAGE_STOP_LIMIT
{8,{false, allow_values {1000000}, "MESSAGES(STOPCOMT): option is not supported"}}, // COMMENT_STOP_LIMIT
{9,{false, allow_values {10000}, "MESSAGES(STOPWARN): option is not supported"}}, // WARNING_STOP_LIMIT
{10,{false, allow_values {100}, "MESSAGES(STOPPROB): option is not supported"}}, // PROBLEM_STOP_LIMIT
{11,{false, allow_values {10}, "MESSAGES(STOPERRS): option is not supported"}}, // ERROR_STOP_LIMIT
{12,{false, allow_values {1}, "MESSAGES(STOPBUGS): option is not supported"}}, // BUG_STOP_LIMIT
{13,{false, allow_values {10}, "MESSAGES(PRTGRPMS): option is not supported"}}, // GROUP_PRINT_LIMIT
},
},
{
"NETBALAN",
{
{5,{false, allow_values {10}, "NETBALAN(THPMXITE): option is not supported"}}, // MAX_ITER_THP
},
},
{
"NETWORK",
{
{3,{false, allow_values {20}, "NETWORK(NBCMAX): option is not used and should be defaulted– value ignored"}}, // NBCMAX
},
},
{
"NNC",
{
{8,{true, allow_values {0}, "NNC(ISATNUM1): only default value of 0 supported"}}, // SIM_DEPENDENT1
{9,{true, allow_values {0}, "NNC(ISATNUM2): only default value of 0 supported"}}, // SIM_DEPENDENT2
{10,{true, allow_values {0}, "NNC(IPRSNUM1): only default value of 0 supported"}}, // PRESSURE_TABLE1
{11,{true, allow_values {0}, "NNC(IPRSNUM2): only default value of 0 supported"}}, // PRESSURE_TABLE2
},
},
{
"NUMRES",
{
{1,{true, allow_values {1}, "NUMRES(NUMRES): only a value of one is supported – will STOP"}}, // NUM
},
},
{
"REGDIMS",
{
{5,{false, allow_values {0}, "REGDIMS(NUSREG): compositional TRACK regions not supported - value ignored"}}, // "MAX_ETRACK
{6,{false, allow_values {1}, "REGDIMS(NTCREG): COAL regions not supported - value ignored"}}, // NTCREG
{8,{false, allow_values {0}, "REGDIMS(NWKDREG): should be equal to 0 - value ignored"}}, // MAX_OPERATE_DWORK
{9,{false, allow_values {0}, "REGDIMS(NWKIREG): should be equal to 0 - value ignored"}}, // MAX_OPERATE_IWORK
},
},
{
"SPECGRID",
{
{4,{true, allow_values {1}, "SPECGRID(NUMRES): must be equal to 1"}}, // NUMRES
},
},
{
"TABDIMS",
{
{7,{false, allow_values {20}, "TABDIMS(NRVPVT): should be defaulted (20) – ignored as not used"}}, // MAX_RV_NODES"
{9,{false, allow_values {1}, "TABDIMS(NMEOSR): must be greater than or equal to 1"}}, // NUM_EOS_RES
{10,{false, allow_values {1}, "TABDIMS(NMEOSS): should be equal to 1 - ignored as not used"}}, // NUM_EOS_SURFACE
{12,{false, allow_values {1}, "TABDIMS(MXNTHR): should be equal to 1 - ignored as not used"}}, // MAX_THERMAL_REGIONS
{14,{false, allow_values {0}, "TABDIMS(MXNPMR): should be equal to 0 - ignored as not used"}}, // MAX_PRESSURE_MAINTAINANCE_REGIONS
{15,{false, allow_values {0}, "TABDIMS(NTABKT): should be defaulted (0) – ignored as not used"}}, // MAX_KVALUE_TABLES
{16,{false, allow_values {0}, "TABDIMS(NTALPHA): should be defaulted (0) - ignored as not used"}}, // NTALPHA
{17,{false, allow_values {10}, "TABDIMS(NASPKA): should be defaulted (10) - ignored as not used"}}, // ASPHALTENE_ASPKDAM_MAX_ROWS
{18,{false, allow_values {10}, "TABDIMS(MXRAWG): should be defaulted (10) - ignored as not used"}}, // ASPHALTENE_ASPREWG_MAX_ROWS
{19,{false, allow_values {10}, "TABDIMS(MXRASO): should be defaulted (10) - ignored as not used"}}, // ASPHALTENE_ASPVISO_MAX_ROWS
{21,{false, allow_values {5}, "TABDIMS(MCASPP): should be defaulted (5) - ignored as not used"}}, // ASPHALTENE_ASPPW2D_MAX_COLUMNS
{22,{false, allow_values {5}, "TABDIMS(MRASPP): should be defaulted (5) - ignored as not used"}}, // ASPHALTENE_ASPPW2D_MAX_ROWS
{23,{false, allow_values {5}, "TABDIMS(MXRATF): should be defaulted (5) - ignored as not used"}}, // ASPHALTENE_ASPWETF_MAX_ROWS
{24,{false, allow_values {0}, "TABDIMS(MXNKVT): should be defaulted (0) - ignored as not used"}}, // NUM_KVALUE_TABLES
},
},
{
"TRACER",
{
{5,{true, allow_values {0}, "TRACER(KPNUM): partitioned tracer model not supported use default"}}, // NUM_PART_TABLE
},
},
{
"TRACERS",
{
{4,{false, allow_values {0}, "TRACERS(MXENVTR): passive environmental tracers not supported - ignored as not used"}}, // MAX_ENV_TRACERS
{6,{false, allow_values {12}, "TRACERS(MXITRTR): not supported - ignored as not used"}}, // MAX_ITER
{7,{false, allow_values {1}, "TRACERS(MNITRTR): not supported - ignored as not used"}}, // MIN_ITER
{9,{false, allow_values {}, "TRACERS(LNCONFAC): not supported - ignored as not used"}}, // ONEOFF_LIN_TIGHT
{10,{false, allow_values {}, "TRACERS(NLCONFAC): not supported - ignored as not used"}}, // ONEOFF_NLIN_TIGHT
{12,{false, allow_values {0}, "TRACERS(NUMCONF): not supported - ignored as not used"}}, // NTIGHTFACTORS
},
},
{
"UDADIMS",
{
{2,{false, allow_values {0}, "UDADIMS(IGNORED): should be defaulted (0) – ignored as not used"}}, // IGNORED
},
},
{
"UDQPARAM",
{
{1,{false, allow_values {1}, "UDQPARAM(RSEED): option not supported – value ignored"}}, // RANDOM_SEED
},
},
{
"WELLDIMS",
{
{5,{false, allow_values {5}, "WELLDIMS(MXSTAGE): option not supported – value ignored"}}, // MAX_STAGES
{6,{false, allow_values {10}, "WELLDIMS(MXSTRMS): option not supported – value ignored"}}, // MAX_STREAMS
{7,{false, allow_values {5}, "WELLDIMS(MXMIS): option not supported – value ignored"}}, // MAX_MIXTURES
{8,{false, allow_values {4}, "WELLDIMS(MXSEPS): option not supported – value ignored"}}, // MAX_SEPARATORS
{9,{false, allow_values {3}, "WELLDIMS(MXCOMPS): option not supported – value ignored"}}, // MAX_MIXTURE_ITEMS
{10,{false, allow_values {0}, "WELLDIMS(MXDOCOMP): option not supported – value ignored"}}, // MAX_COMPLETION_X
{11,{false, allow_values {1}, "WELLDIMS(MXWSLIST): option not supported – value ignored"}}, // MAX_WELLIST_PR_WELL
{12,{false, allow_values {1}, "WELLDIMS(MXWLISTS): option not supported – value ignored"}}, // MAX_DYNAMIC_WELLIST
{13,{false, allow_values {10}, "WELLDIMS(MXWSECD): option not supported – value ignored"}}, // MAX_SECONDARY_WELLS
{14,{false, allow_values {201}, "WELLDIMS(MXNGPP): option not supported – value ignored"}}, // NO_JASON_ENTRY
},
},
{
"WELSPECS",
{
{17,{true, allow_values {0}, "WELSPECS(POLYTAB): only the default value of zero is supported"}}, // POLYMER_TABLE
},
},
};
return partially_supported_keywords_int;
}
template <>
const KeywordValidation::PartiallySupportedKeywords&
partiallySupported()
{
static const KeywordValidation::PartiallySupportedKeywords partially_supported_keywords_double = {
{
"AQUCON",
{
{12,{false, allow_values {1}, "AQUCON(VEOPT1): Vertical Equilibrium option one– not used"}}, // VEFRAC
{13,{false, allow_values {1}, "AQUCON(VEOPI2): Vertical Equilibrium option two– not used"}}, // VEFRACP
},
},
{
"AQUCT",
{
{12,{false, allow_values {0}, "AQUCT(SALTCON): option is not used and should be defaulted – value ignored"}}, // INI_SALT
},
},
{
"AQUFETP",
{
{8,{false, allow_values {0}, "AQUFETP(SALTCON): option is not used and should be defaulted – value ignored"}}, // SALINITY
{9,{false, allow_values {}, "AQUFETP(TEMP): option is not used and should be defaulted – value ignored"}}, // TEMP
},
},
{
"COMPDAT",
{
{12,{false, allow_values {}, "COMPDAT(DFACT): non-Darcy D factor not supported and should be defaulted (1*) – value ignored"}}, // D_FACTOR
},
},
{
"DIFFC",
{
{7,{false, allow_values {0}, "DIFFC(ISATNUM1): only default value of 0 supported – will continue"}}, // GAS_OIL_CROSS_DIFF_COEFF
{8,{false, allow_values {0}, "DIFFC(ISATNUM2): only default value of 0 supported – will continue"}}, // OIL_OIL_CROSS_DIFF_COEFF
},
},
{
"EDITNNC",
{
{14,{true, allow_values {0}, "EDITNNC(DIFFNNC): not supported and should be defaulted"}}, // DIFFM
},
},
{
"EHYSTR",
{
{3,{false, allow_values {1.0}, "EHYSTR(HYSTREL): Killough’s option not supported and should be defaulted"}}, // curvature_param_killough_wetting
{12,{true, allow_values {0}, "EHYSTR(HYTHRESH): Killough’s option not supported and should be defaulted"}}, // threshold_saturation
},
},
{
"FOAMFSC",
{
{4,{false, allow_values {1E-6}, "FOAMFSC(MINSWAT): option is not supported – value ignored"}}, // MIN_WAT_SAT
},
},
{
"GCONINJE",
{
{13,{false, allow_values {}, "GCONINJE(WGASRATE): wet gas rate is not used and should be defaulted (1*)"}}, // WETGAS_TARGET
},
},
{
"GCONPROD",
{
{15,{true, allow_values {}, "GCONPROD(RESVFRAC): reservoir volume fraction is not supported and should be defaulted (1*)"}}, // RESERVOIR_VOLUME_BALANCE
{16,{false, allow_values {}, "GCONPROD(WGASRATE): wet gas rate is not used and should be defaulted (1*)"}}, // WETGAS_TARGET
{17,{false, allow_values {}, "GCONPROD(CALRATE): calorific rate is not used and should be defaulted (1*)"}}, // CALORIFIC_TARGET
{18,{false, allow_values {}, "GCONPROD(GASFRAC): gas production fraction is not used and should be defaulted (1*)"}}, // SURFACE_GAS_FRACTION
{19,{false, allow_values {}, "GCONPROD(WATFRAC): water production fraction is not used and should be defaulted (1*)"}}, // SURFACE_WAT_FRACTION
{20,{true, allow_values {}, "GCONPROD(COMBRATE): linearly combined rate is not used and should be defaulted (1*)"}}, // LINEAR_COMBINED_TARGET
},
},
{
"GUIDERAT",
{
{10,{true, [](double x) { return x >= 0; }, "GUIDERAT(GROPT01): only only positive values allowed – will STOP"}}, // ALLOW_INCREASE
},
},
{
"MULTFLT",
{
{3,{true, allow_values {}, "MULTFLT(FLT-DIF): the diffusivity multiplier option is not supported"}}, // NOT_DEFINED
},
},
{
"NETBALAN",
{
{1,{true, [](const double value) { return value <= 0.0; }, "NETBALAN(NSTEP): only negative values or 0 supported"}}, // TIME_INTERVAL
{4,{false, allow_values {0.01}, "NETBALAN(GRPCNV): not supported"}}, // THP_CONVERGENCE_LIMIT
{6,{false, allow_values {1e20}, "NETBALAN(NTRGERR): not supported"}}, // TARGET_BALANCE_ERROR
{7,{false, allow_values {1e20}, "NETBALAN(NMAXERR): not supported"}}, // MAX_BALANCE_ERROR
{8,{false, allow_values {}, "NETBALAN(NTSMIN): not supported"}}, // MIN_TIME_STEP
},
},
{
"NNC",
{
{14,{true, allow_values {0}, "NNC(DIFFNNC): not supported"}}, // DIFFUSIVITY
{15,{true, allow_values {0}, "NNC(DISPNNC): not supported"}}, // SIM_DEPENDENT3
{16,{true, allow_values {0}, "NNC(AREANNC): not supported"}}, // VDFLOW_AREA
{17,{true, allow_values {0}, "NNC(PERMNNC): not supported"}}, // VDFLOW_PERM
},
},
{
"PLYMAX",
{
{2,{false, allow_values {}, "PLYMAX(SALTCON): option is ignored since BRINE and POLYMER combination is not implemented in OPM Flow"}}, // MAX_SALT_CONCENTRATION
},
},
{
"ROCKCOMP",
{
{5,{false, allow_values {0}, "ROCKCOMP(CARKZEXP): transmissibility dependent on porosity model is not supported"}}, // CARKZEXP
},
},
{
"TRACERS",
{
{11,{false, allow_values {1.0}, "TRACERS(CONFAC): not supported - ignored as not used"}}, // TIGHTENING_FACTORS
},
},
{
"VISCREF",
{
{3,{true, allow_values {}, "VISCREF(API): API tracking option is not supported"}}, // API_GRAVITY
},
},
{
"WCONHIST",
{
{11,{false, [](double x) { return x == 0; }, "WCONHIST(WGRA): wet gas rate is not supported use default"}}, // WGASRAT
{12,{false, [](double x) { return x == 0; }, "WCONHIST(NGL): natural gas rate is not supported use default"}}, // NGLRAT
},
},
{
"WCONINJE",
{
{11,{true, [](double x) { return x == 0; }, "WCONINJE(RSSTEAM): is not supported and is ignored"}}, // GAS_STEAM_RATIO
{12,{true, [](double x) { return x == 0; }, "WCONINJE(OILFRAC): is not supported and is ignored"}}, // SURFACE_OIL_FRACTION
{13,{true, [](double x) { return x == 0; }, "WCONINJE(WATFRAC): is not supported and is ignored"}}, // SURFACE_WATER_FRACTION
{14,{true, [](double x) { return x == 0; }, "WCONINJE(GASFRAC): is not supported and is ignored"}}, // SURFACE_GAS_FRACTION
{15,{true, [](double x) { return x == 0; }, "WCONINJE(OILSTEAM): is not supported and is ignored"}}, // OIL_STEAM_RATIO
},
},
{
"WCONINJH",
{
{8,{true, [](double x) { return x == 0; }, "WCONINJH(RSRVINJ): is not supported and is ignored"}}, // VAPOIL_C
{9,{true, [](double x) { return x == 0; }, "WCONINJH(OILFRAC): is not supported and is ignored"}}, // SURFACE_OIL_FRACTION
{10,{true, [](double x) { return x == 0; }, "WCONINJH(WATFRAC): is not supported and is ignored"}}, // SURFACE_WATER_FRACTION
{11,{true, [](double x) { return x == 0; }, "WCONINJH(GASFRAC): is not supported and is ignored"}}, // SURFACE_GAS_FRACTION
},
},
{
"WCONPROD",
{
{13,{false, allow_values {}, "WCONPROD(WGASRATE): wet gas rate is not used and should be defaulted (1*)"}}, // E300_ITEM13
{14,{false, allow_values {}, "WCONPROD(MOLARATE): molar rate not used and should be defaulted (1*)"}}, // E300_ITEM14
{15,{false, allow_values {}, "WCONPROD(STEAMRAT): steam rate is not used and should be defaulted (1*)"}}, // E300_ITEM15
{16,{false, allow_values {}, "WCONPROD(DELTAP): pressure offset not used and should be defaulted (1*)"}}, // E300_ITEM16
{17,{false, allow_values {}, "WCONPROD(DELTAT): temperature offset not used and should be defaulted (1*)"}}, // E300_ITEM17
{18,{false, allow_values {}, "WCONPROD(CALRATE): calorific rate not used and should be defaulted (1*)"}}, // E300_ITEM18
{19,{true, allow_values {}, "WCONPROD(COMBPROC): linearly combined rate not used and should be defaulted (1*)"}}, // E300_ITEM19
{20,{false, allow_values {}, "WCONPROD(NGL): natural gas liquid rate is not used and should be defaulted (1*)"}}, // E300_ITEM20
},
},
{
"WINJTEMP",
{
{2,{true, allow_values {1}, "WINJTEMP(STEAMQAL): steam injection is not supported, this item should be defaulted"}}, // STEAM_QUALITY
{5,{true, allow_values {0}, "WINJTEMP(ENTHALPY): enthalpy of injected fluid is not supported"}}, // ENTHALPY
},
},
{
"WLIFTOPT",
{
{6,{true, allow_values {0}, "WLIFTOPT(OPTGAS): incremental gas weighting not supported"}}, // DELTA_GAS_RATE_WEIGHT_FACTOR
},
},
};
return partially_supported_keywords_double;
}
} // namespace Opm::FlowKeywordValidation