opm_set_test_driver(${PROJECT_SOURCE_DIR}/tests/run-parallel-regressionTest.sh "") # Different tolerances for these tests set(abs_tol_parallel 0.02) set(rel_tol_parallel 8e-5) set(coarse_rel_tol_parallel 1e-2) add_test_compare_parallel_simulation(CASENAME spe1 FILENAME SPE1CASE2 SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${rel_tol_parallel} TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8 --enable-drift-compensation=false) add_test_compare_parallel_simulation(CASENAME spe1_gaswater FILENAME SPE1CASE2_GASWATER SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${rel_tol_parallel} DIR spe1 TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8) add_test_compare_parallel_simulation(CASENAME spe9 FILENAME SPE9_CP_SHORT SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${rel_tol_parallel} TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8 --enable-drift-compensation=false) # A test for distributed standard wells. We load distribute only along the z-axis add_test_compare_parallel_simulation(CASENAME spe9_dist_z FILENAME SPE9_CP_SHORT DIR spe9 SIMULATOR flow_distribute_z ABS_TOL ${abs_tol_parallel} REL_TOL ${rel_tol_parallel} TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8 --enable-drift-compensation=false) add_test_compare_parallel_simulation(CASENAME spe9group FILENAME SPE9_CP_GROUP SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${coarse_rel_tol_parallel} TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8) add_test_compare_parallel_simulation(CASENAME spe3 FILENAME SPE3CASE1 SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${coarse_rel_tol_parallel} TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8 --tolerance-wells=1e-7) add_test_compare_parallel_simulation(CASENAME spe1_solvent FILENAME SPE1CASE2_SOLVENT SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${coarse_rel_tol_parallel} TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8) add_test_compare_parallel_simulation(CASENAME polymer_simple2D FILENAME 2D_THREEPHASE_POLY_HETER SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${coarse_rel_tol} TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8) add_test_compare_parallel_simulation(CASENAME spe1_foam FILENAME SPE1FOAM SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${coarse_rel_tol_parallel}) add_test_compare_parallel_simulation(CASENAME spe1_thermal FILENAME SPE1CASE2_THERMAL SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${coarse_rel_tol_parallel}} DIR spe1 TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8) add_test_compare_parallel_simulation(CASENAME spe1_thermal_onephase FILENAME SPE1CASE2_THERMAL_ONEPHASE SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${rel_tol} DIR spe1 TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8) add_test_compare_parallel_simulation(CASENAME spe1_water FILENAME SPE1CASE1_WATER SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${rel_tol} DIR spe1 TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8 --tolerance-wells=1e-7) add_test_compare_parallel_simulation(CASENAME spe1_brine FILENAME SPE1CASE1_BRINE SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${coarse_rel_tol_parallel} TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-6) add_test_compare_parallel_simulation(CASENAME fetkovich_2d FILENAME 2D_FETKOVICHAQUIFER SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${rel_tol_parallel} DIR aquifer-fetkovich TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-6) add_test_compare_parallel_simulation(CASENAME ctaquifer_2d_oilwater FILENAME 2D_OW_CTAQUIFER SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${rel_tol_parallel} DIR aquifer-oilwater TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-6) add_test_compare_parallel_simulation(CASENAME 3d_tran_operator FILENAME 3D_TRAN_OPERATOR SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL 0.03 DIR parallel_fieldprops TEST_ARGS --enable-tuning=true --enable-drift-compensation=false --relaxed-max-pv-fraction=0.0) add_test_compare_parallel_simulation(CASENAME numerical_aquifer_3d_2aqu FILENAME 3D_2AQU_NUM SIMULATOR flow ABS_TOL 0.17 REL_TOL ${coarse_rel_tol_parallel} DIR aquifer-num TEST_ARGS --tolerance-cnv=0.000003 --time-step-control=pid --linear-solver=cpr_trueimpes --enable-drift-compensation=false --relaxed-max-pv-fraction=0.0) add_test_compare_parallel_simulation(CASENAME aquflux_01 FILENAME AQUFLUX-01 SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL 0.06 DIR aquifers TEST_ARGS --enable-tuning=true --enable-drift-compensation=false --relaxed-max-pv-fraction=0.0 --tolerance-cnv=1.0e-3) add_test_compare_parallel_simulation(CASENAME aquflux_02 FILENAME AQUFLUX-02 SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${coarse_rel_tol_parallel} DIR aquifers TEST_ARGS --enable-tuning=true) add_test_compare_parallel_simulation(CASENAME network_balance_01 FILENAME NETWORK-01 SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${coarse_rel_tol_parallel} DIR network TEST_ARGS --enable-tuning=true --time-step-control=newtoniterationcount --time-step-control-growth-rate=3.0 --relaxed-max-pv-fraction=0.0 --tolerance-cnv=1e-3) add_test_compare_parallel_simulation(CASENAME numerical_aquifer_3d_1aqu FILENAME 3D_1AQU_3CELLS SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL 0.05 DIR aquifer-num TEST_ARGS --enable-tuning=true --tolerance-cnv=0.00003 --time-step-control=pid --linear-solver=cpr_trueimpes --enable-drift-compensation=false --relaxed-max-pv-fraction=0.0) add_test_compare_parallel_simulation(CASENAME actionx_m1 FILENAME ACTIONX_M1 SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${coarse_rel_tol_parallel} DIR udq_actionx TEST_ARGS --solver-max-time-step-in-days=0.2 --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-6) add_test_compare_parallel_simulation(CASENAME reg_smry_in_fld_udq FILENAME UDQ_REG-01 SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL ${coarse_rel_tol_parallel} DIR udq_actionx TEST_ARGS --enable-tuning=true) add_test_compare_parallel_simulation(CASENAME winjmult_msw FILENAME WINJMULT_MSW SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${rel_tol} DIR winjmult TEST_ARGS --enable-drift-compensation=false --enable-tuning=true --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8) add_test_compare_parallel_simulation(CASENAME winjdam_msw FILENAME WINJDAM_MSW SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${rel_tol} DIR winjdam TEST_ARGS --enable-drift-compensation=false --enable-tuning=true --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8) add_test_compare_parallel_simulation(CASENAME 3_a_mpi_multflt_mod2 FILENAME 3_A_MPI_MULTFLT_SCHED_MODEL2 SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL 1.0e-3 DIR model2 TEST_ARGS --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8 --newton-max-iterations=30 --enable-drift-compensation=false) add_test_compare_parallel_simulation(CASENAME rxft FILENAME TEST_RXFT SIMULATOR flow ABS_TOL ${abs_tol_parallel} REL_TOL 1.0e-3 DIR rxft_smry TEST_ARGS --enable-tuning=true --linear-solver-reduction=1e-7 --tolerance-cnv=5e-6 --tolerance-mb=1e-8 --enable-drift-compensation=false) opm_set_test_driver(${PROJECT_SOURCE_DIR}/tests/run-comparison.sh "") add_test_compareSeparateECLFiles(CASENAME actionx_compdat_1_proc DIR1 actionx FILENAME1 COMPDAT_SHORT DIR2 actionx FILENAME2 ACTIONX_COMPDAT_SHORT SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${rel_tol} IGNORE_EXTRA_KW BOTH MPI_PROCS 1) add_test_compareSeparateECLFiles(CASENAME actionx_compdat_2_procs DIR1 actionx FILENAME1 COMPDAT_SHORT DIR2 actionx FILENAME2 ACTIONX_COMPDAT_SHORT SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${rel_tol} IGNORE_EXTRA_KW BOTH MPI_PROCS 2) add_test_compareSeparateECLFiles(CASENAME actionx_compdat_nldd_1_proc DIR1 actionx FILENAME1 COMPDAT_SHORT DIR2 actionx FILENAME2 ACTIONX_COMPDAT_SHORT SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${rel_tol} IGNORE_EXTRA_KW BOTH MPI_PROCS 1 TEST_ARGS --nonlinear-solver=nldd --matrix-add-well-contributions=true --linear-solver=ilu0) add_test_compareSeparateECLFiles(CASENAME actionx_compdat_nldd_2_procs DIR1 actionx FILENAME1 COMPDAT_SHORT DIR2 actionx FILENAME2 ACTIONX_COMPDAT_SHORT SIMULATOR flow ABS_TOL ${abs_tol} REL_TOL ${rel_tol} IGNORE_EXTRA_KW BOTH MPI_PROCS 2 TEST_ARGS --nonlinear-solver=nldd --matrix-add-well-contributions=true --linear-solver=ilu0)