opm-simulators/opm/core/newwells.h
2012-04-23 20:48:31 +02:00

216 lines
7.9 KiB
C

/*
Copyright 2012 SINTEF ICT, Applied Mathematics.
This file is part of the Open Porous Media project (OPM).
OPM is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OPM is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OPM. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef OPM_NEWWELLS_H_INCLUDED
#define OPM_NEWWELLS_H_INCLUDED
/**
* \file
*
* Main OPM-Core well data structure along with functions
* to create, populate and destroy it.
*/
#ifdef __cplusplus
extern "C" {
#endif
/** Well type indicates desired/expected well behaviour. */
enum WellType { INJECTOR, PRODUCER };
/** Type of well control equation or inequality constraint.
* BHP -> Well constrained by bottom-hole pressure target.
* RATE -> Well constrained by total reservoir volume flow rate.
*/
enum WellControlType { BHP , RATE };
/** Canonical component names and ordering. */
enum SurfaceComponent { WATER = 0, OIL = 1, GAS = 2 };
/** Controls for a single well.
* Each control specifies a well rate or bottom-hole pressure. Only
* one control can be active at a time, indicated by current. The
* meaning of each control's target value depends on the control
* type, for BHP controls it is a pressure in Pascal, for RATE
* controls it is a volumetric rate in cubic(meter)/second. The
* active control as an equality constraint, whereas the
* non-active controls should be interpreted as inequality
* constraints (upper or lower bounds). For instance, a PRODUCER's BHP
* constraint defines a minimum acceptable bottom-hole pressure value
* for the well.
*/
struct WellControls
{
int num; /** Number of controls. */
enum WellControlType *type; /** Array of control types. */
double *target; /** Array of control targets. */
int current; /** Index of current active control. */
void *data; /** Internal management structure. */
};
/** Data structure aggregating static information about all wells in a scenario. */
struct Wells
{
int number_of_wells; /** Number of wells. */
enum WellType *type; /** Array of well types. */
double *depth_ref; /** Array of well bhp reference depths. */
double *zfrac; /** Component volume fractions for each well, size is (3*number_of_wells).
* This is intended to be used for injection wells. For production wells
* the component fractions will vary and cannot be specified a priori.
*/
int *well_connpos; /** Array of indices into well_cells (and WI).
* For a well w, well_connpos[w] and well_connpos[w+1] yield
* start and one-beyond-end indices into the well_cells array
* for accessing w's perforation cell indices.
*/
int *well_cells; /** Array of perforation cell indices.
* Size is number of perforations (== well_connpos[number_of_wells]).
*/
double *WI; /** Well productivity index, same size and structure as well_cells. */
struct WellControls **ctrls; /** Well controls, one set of controls for each well. */
void *data; /** Internal management structure. */
};
/** Data structure aggregating dynamic information about all wells in a scenario.
* All arrays in this structure contain data for each perforation,
* ordered the same as Wells::well_cells and Wells:WI. The array
* sizes are, respectively,
*
* gpot n*NP
* A n²*NP (matrix in column-major (i.e., Fortran) order).
* phasemob n*NP
*
* in which "n" denotes the number of active fluid phases (and
* constituent components) and "NP" is the total number of
* perforations, <CODE>well_connpos[ number_of_wells ]</CODE>.
*/
struct CompletionData
{
double *gpot; /** Gravity potentials. */
double *A; /** Volumes to surface-components matrix, A = RB^{-1}. */
double *phasemob; /** Phase mobilities. */
};
/**
* Construct a Wells object initially capable of managing a given
* number of wells and total number of well connections
* (perforations).
*
* Function add_well() is used to populate the Wells object. No
* reallocation occurs in function add_well() as long as the
* initially indicated capacities are sufficient. Call function
* destroy_wells() to dispose of the Wells object and its allocated
* memory resources.
*
* \param[in] nwells Expected number of wells in simulation scenario.
* Pass zero if the total number of wells is unknown.
*
* \param[in] nperf Expected total number of well connections
* (perforations) for all wells in simulation
* scenario. Pass zero if the total number of well
* connections is unknown.
*
* \return A valid Wells object with no wells if successful, and NULL
* otherwise.
*/
struct Wells *
create_wells(int nwells, int nperf);
/**
* Append a new well to an existing Wells object.
*
* Increments W->number_of_wells by one if successful. The new well
* does not include operational constraints. Such information is
* specified using function append_well_controls(). The current
* control index is set to -1 (invalid).
*
* \param[in] type Type of well.
* \param[in] depth_ref Reference depth for well's BHP.
* \param[in] nperf Number of perforations.
* \param[in] zfrac Injection fraction (three components) or NULL.
* \param[in] cells Grid cells in which well is perforated. Should
* ideally be track ordered.
* \param[in] WI Well production index per perforation, or NULL.
* \param[in,out] W Existing set of wells to which new well will
* be added.
*
* \return Non-zero (true) if successful and zero otherwise.
*/
int
add_well(enum WellType type ,
double depth_ref,
int nperf ,
const double *zfrac ,
const int *cells ,
const double *WI ,
struct Wells *W );
/**
* Append operational constraint to an existing well.
*
* Increments ctrl->num by one if successful. Introducing a new
* operational constraint does not affect the well's notion of the
* currently active constraint represented by ctrl->current.
*
* \param[in] type Control type.
* \param[in] target Target value for the control.
* \param[inout] ctrl Existing set of well controls.
* \return Non-zero (true) if successful and zero (false) otherwise.
*/
int
append_well_controls(enum WellControlType type ,
double target,
struct WellControls *ctrl );
/**
* Clear all controls from a well.
*
* Does not affect the control set capacity. */
void
clear_well_controls(struct WellControls *ctrl);
/**
* Wells object destructor.
*
* Disposes of all resources managed by the Wells object.
*
* The Wells object must be built using function create_wells() and
* subsequently populated using function add_well().
*/
void
destroy_wells(struct Wells *W);
#ifdef __cplusplus
}
#endif
#endif /* OPM_NEWWELLS_H_INCLUDED */