Problem: 'cursorline' and 'wincolor' highlight missing with concealed and
wrapped lines.
Solution: Apply 'cursorline' and 'wincolor' highlight to boguscols.
(zeertzjq)
Since 'cursorline' and 'wincolor' highlight apply after the end of the
line, it is more consistent to have them also apply to boguscols.
Assigning MAXCOL to values in ScreenCols[] make mouse click behave the
same with 'cursorline' and 'nocursorline', but such behavior may be
incorrect, as it puts the cursor on the next screen line. That may be
fixed in a future PR.
closes: vim/vim#1419221b0a3df8c
Problem: E1513 might be confusing
(Christoph Thoma)
Solution: reword error message, fix test to not
depend on the actual message
fixes: vim/vim#141890a32b8854b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: winframe functions incorrectly recompute window positions if
the altframe wasn't adjacent to the closed frame, which is
possible if adjacent windows had 'winfix{width,height}' set.
Solution: recompute for windows within the parent of the altframe and
closed frame. Skip this (as before) if the altframe was
top/left, but only if adjacent to the closed frame, as
positions won't change in that case. Also correct the return
value documentation for win_screenpos. (Sean Dewar)
The issue revealed itself after removing the win_comp_pos call below
winframe_restore in win_splitmove. Similarly, wrong positions could result from
windows closed in other tabpages, as win_free_mem uses winframe_remove (at least
until it is entered later, where enter_tabpage calls win_comp_pos).
NOTE: As win_comp_pos handles only curtab, it's possible via other means for
positions in non-current tabpages to be wrong (e.g: after changing 'laststatus',
'showtabline', etc.). Given enter_tabpage recomputes it, maybe it's intentional
as an optimization? Should probably be documented in win_screenpos then, but I
won't address that here.
closes: vim/vim#14191
Nvim: don't reuse "wp" for "topleft" in winframe_remove, so the change
integrates better with the call to winframe_find_altwin before it.
5866bc3a0f
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Problem: small improvements can be made to split-move related
functions.
Solution: apply them (Sean Dewar):
Some of these changes were already applied to Nvim.
Here are the ones which were missing:
- Improve some doc comments (frame_flatten should still work for non-current
tabpages, despite the topframe check, which looks benign, though I'm unsure if
it's still needed; see vim/vim#2467).
- f_win_splitmove should check_split_disallowed on wp, not targetwin, as that's
what win_splitmove checks (though it's probably unnecessary to check
b_locked_split at all; see vim/vim#14109, which I hope to get around to
finishing at some point).
- Apply the winframe_restore comment changes, and remove win_comp_pos from after
winframe_restore in win_splitmove, as it shouldn't be necessary (no need to
remove it from nvim_win_set_config too, as it was already omitted).
Move win_append after winframe_restore in win_splitmove to match Vim.
closes: vim/vim#141855cac1a9bee
Problem: more places exist where curwin == prevwin, and it may even be
expected in some cases.
Solution: revert v9.1.0001, but document that it's possible instead.
(Sean Dewar)
I've had a change of heart for the following reasons:
- A quick 'n dirty [GitHub code search](https://github.com/search?q=%2F%28winnr%5C%28%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%7Cwinnr%5C%28%5B%27%22%5D%23%5B%27%22%5D%5C%29%5Cs*%3D%3D%5Cs*winnr%5C%28%5C%29%29%2F&type=code)
reveals some cases where it's expected in the wild.
Particularly, it made me aware `winnr() == winnr('#')` is possible when curwin
is changed temporarily during the evaluation of a &statusline expression item
(`%{...}`), and is used to show something different on the statusline
belonging to the previous window; that behaviour wasn't changed in v9.1.0001,
but it means curwin == prevwin makes sense in some cases.
- The definition and call sites of back_to_prevwin imply some expectation that
prevwin == wp (== curwin) is possible, as it's used to skip entering the
prevwin in that case.
- Prior to v9.1.0001, `:wincmd p` would not beep in the case that was patched in
v9.1.0001, but now does. That resulted in vim/vim#14047 being opened, as it affected
the CtrlP plugin.
I find it odd that `:wincmd p` had cases where it wouldn't beep despite doing
nothing, but it may be preferable to keep things that way (or instead also
beep if curwin == prevwin, if that's preferred).
- After more digging, I found cases in win_free_mem, enter_tabpage,
aucmd_restbuf and qf_open_new_cwindow where curwin == prevwin is possible
(many of them from autocommands). Others probably exist too, especially in
places where curwin is changed temporarily.
fixes: vim/vim#14047closes: vim/vim#14186d64801e913
Using -1 as the initial value can cause the pattern offset to become
negative, which in turn results in a negative subpriority, which fails
validation in nvim_buf_set_extmark.
Problem: current window number returned by tabpagewinnr may be outdated
when called from win_execute for the original tabpage.
Solution: update the original tabpage's tp_curwin in switch_win; use
{un}use_tabpage instead. Don't do it in restore_win to ensure
tp_curwin of the temporarily visited tabpage is unchanged from
switch_win visiting it, as before. (Sean Dewar)
Maybe restore_win should only restore tp_curwin if
`curtab == switchwin->sw_curtab`, in case the user changed tabpages from within
win_execute, but not doing that is consistent with the old behaviour.
related: vim/vim#14186e101028a5c
Current uses of vim_strup() calls memcpy()/strcpy() before calling vim_strup().
This results in 2 * strlen(string) operations.
We can trivially convert to lowercase while copying the string instead.
Tree-sitter queries can add URLs to a capture using the `#set!`
directive, e.g.
(inline_link
(link_text) @text.reference
(link_destination) @text.uri
(#set! @text.reference "url" @text.uri))
The pattern above is included by default in the `markdown_inline`
highlight query so that users with supporting terminals will see
hyperlinks. For now, this creates a hyperlink for *all* Markdown URLs of
the pattern [link text](link url), even if `link url` does not contain
a valid protocol (e.g. if `link url` is a path to a file). We may wish to
change this in the future to only linkify when the URL has a valid
protocol scheme, but for now we delegate handling this to the terminal
emulator.
In order to support directives which reference other nodes, the
highlighter must be updated to use `iter_matches` rather than
`iter_captures`. The former provides the `match` table which maps
capture IDs to nodes. However, this has its own challenges:
- `iter_matches` does not guarantee the order in which patterns are
iterated matches the order in the query file. So we must enforce
ordering manually using "subpriorities" (#27131). The pattern index of
each match dictates the extmark's subpriority.
- When injections are used, the highlighter contains multiple trees. The
pattern indices of each tree must be offset relative to the maximum
pattern index from all previous trees to ensure that extmarks appear
in the correct order.
- The `iter_captures` implementation currently has a bug where the
"match" table is only returned for the first capture within a pattern
(see #27274). This bug means that `#set!` directives in a query
apply only to the first capture within a pattern. Unfortunately, many
queries in the wild have come to depend on this behavior.
`iter_matches` does not share this flaw, so switching to
`iter_matches` exposed bugs in existing highlight queries. These
queries have been updated in this repo, but may still need to be
updated by users. The `#set!` directive applies to the _entire_ query
pattern when used without a capture argument. To make `#set!`
apply only to a single capture, the capture must be given as an
argument.
The original implementation has a worst-case of O(n^2). Every time
rem_backslash() is true, it calculates the length of the rest of the
string, and shift the rest of it to the left; backslash_halve_save()
copies the original string before doing backslash_halve().
The new implementation is O(n). It will find the first character where
rem_backslash() is true (it will do nothing if it's always false), and
shift the characters in-place; backslash_halve_save() avoids copying the
original string before doing backslash_halve().
Problem: too many STRLEN() calls
Solution: Make use of ml_get_len() calls instead
(John Marriott)
closes: vim/vim#14123bfcc895482
Co-authored-by: John Marriott <basilisk@internode.on.net>
runtime(vim): Update base-syntax, improve number matching (vim/vim#14175)
- Limit blob literals to an even number of hexadecimal digits and
correctly located dots.
- Match octal numbers.
The current version unsuccessfully attempts to match a leading '-' as
part of the float literal. It's actually parsed as part of the literal
for all numbers but the syntax file hasn't matched it like that for a
long time and highlights negative numbers as UNARY-MINUS NUMBER. This
will be fixed when better expression matching is implemented.
5cd86c6cff
Co-authored-by: dkearns <dougkearns@gmail.com>
Problem: Changing buffer in another window using win_execute() causes
it to show matchparen (after 9.0.0969).
Solution: Delay highlighting with SafeState in BufWinEnter.
(zeertzjq)
closes: vim/vim#1417749ffb6b428
Problem: Internal error with blockwise getregion() in another buffer
Solution: Also change curwin->w_buffer when changing curbuf (zeertzjq)
closes: vim/vim#141795406eb8722
Problem: Text properties are wrong after "cc". (Axel Forsman)
Solution: Pass the deleted byte count to inserted_bytes(). (closesvim/vim#10412,
closesvim/vim#7737, closesvim/vim#5763)
d0b1a09f44
Co-authored-by: LemonBoy <thatlemon@gmail.com>
- Add :h fswatch-limitations that notifies user about default inotify
limitations on linux and how to adjust them
- Check for Event queue overflow message from fswatch and refer user to
new documentation
Signed-off-by: Tomas Slusny <slusnucky@gmail.com>
Problem: Arbitrary restriction on 'cmdheight' with ext_messages.
The 'cmdheight'-area may be desirable for the replacing
cmdline.
Solution: Allow non-zero 'cmdheight' with ext_messages.
Problem: may not be clear why failing to split causes an ":Xdo" command
to abort if 'wfb' is set.
Solution: do not return immediately if win_split fails, so E1513 is
still given. Expect both errors in the test. Also fix tests to
pass CI.
(Sean Dewar)
closes: vim/vim#14152769eb2d0c3
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Coverity complains about ignoring return value of win_split()
(after v9.1.150)
Solution: Check if win_split() failed, add winfixbuf.res to Makefile
af7ae81600
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: several minor 'winfixbuf' issues exist, mostly relating to the
quickfix list
Solution: address them and adjust tests. Retab and reflow a few things too.
(Sean Dewar)
Things touched include:
- Replace the semsgs with gettext'd emsgs.
- Handle window switching in ex_listdo properly, so curbuf and curwin
are kept in-sync and trigger autocommands; handle those properly.
- Don't change the list entry index in qf_jump_edit_buffer if we fail
due to 'wfb' (achieved by returning FAIL; QF_ABORT should only be used
if the list was changed).
- Make qf_jump_edit_buffer actually switch to prevwin when using `:cXX`
commands **outside** of the list window if 'wfb' is set in curwin.
Handle autocommands properly in case they mess with the list.
NOTE: previously, it seemed to split if 'wfb' was set, but do nothing
and fail if prevwin is *valid*. This behaviour seemed strange, and maybe
unintentional? Now it aligns more with what's described for the `:cXX`
commands in the original PR description when used outside a list window,
I think.
- In both functions, only consider prevwin if 'wfb' isn't set for it;
fallback to splitting otherwise.
- Use win_split to split. Not sure if there was a specific reason for
using ex_splitview. win_split is simpler and respects modifiers like
:vertical that may have been used. Plus, its return value can be checked
for setting opened_window in qf code (technically win_split_ins autocmds
could immediately close it or change windows, in which the qf code might
close some other window on failure; it's already the case elsewhere,
though).
closes: vim/vim#141424bb505e28c
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: qf_goto_win_with_qfl_file may check if prevwin has 'winfixbuf'
set without checking if it's valid first.
Solution: Reverse the condition. Add a test, a modeline, and a missing
CheckFeature. (Searn Dewar)
closes: vim/vim#141405131f224da
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
`get_target_property(<var> ...)` sets `<var>` to `<var>-NOTFOUND` if the
property doesn't exist for the given target. Detect this situation to
avoid adding various `-Dprop-NOTFOUND` and `-Iprop-NOTFOUND` to the
command-line when generating the headers.
Problem: Internal error or crash when passing invalid position to
getregion().
Solution: Give an error for invalid position (zeertzjq).
closes: vim/vim#1417226dd09ad5e
Problem: too many STRLEN calls when getting a memline
Solution: Optimize calls to STRLEN(), add a few functions in memline.c
that return the byte length instead of relying on STRLEN()
(John Marriott)
closes: vim/vim#1405202d7a6c6cf
Cherry-pick line break changes from patch 8.1.0226.
Cherry-pick ml_line_len from patch 8.1.0579.
Cherry-pick test_comments.vim change from patch 9.1.0153.
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: problem with writing extended attributes on failure
Solution: Change return type to ssize_t and check listxattr's return
value correctly on failure (Paul Tagliamonte)
The existing logic will return when the listxattr call returns with the
errno set to ENOTSUP (or a size of 0 bytes), without checking to see if
listxattr actually failed. listxattr can fail with at least E2BIG,
ENOTSUP, ERANGE, or anything that `stat(2)` can fail with (in my case;
ENOENT from stat).
The returned size is stored to a size_t, but the return type is a
ssize_t. On failure, listxattr returns -1, which will get translated to
size_t's MAX. If the listxattr call failed with anything other than
ENOTSUP, this triggers a request for size_t MAX bytes.
This means that, if the listxattr call fails with anything other than
ENOTSUP on save, vim will error with
`E342: Out of memory! (allocating 18446744073709551615 bytes)`
(keen observers will note 18446744073709551615 is 0xffffffffffffffff)
In reality, this is likely masking a different (usually filesystem?)
error -- but at least it's an error being pushed to the user now, and we
don't try to allocate size_t MAX bytes.
I've opted to change the type that we store listxattr to from size_t to
ssize_t, to match listxattr(2)'s signature, and to check for the -1
return value. Additionally, I've removed the errno check -- if we get a
listxattr failure for any reason, we may as well bail without trying;
it's not like we can even recover.
closes: vim/vim#1416914759ded57
Co-authored-by: Paul R. Tagliamonte <paultag@gmail.com>
runtime(vim): Update base-syntax, improve :menu{,translate} highlighting (vim/vim#14162)
Improve :menu and :menutranslate highlighting.
- Match args to :menutranslation and :popup.
- Only highlight special notation in {rhs} of :menu, like :map.
- Allow line continuations in {rhs} of :menu and between {english} and
{mylang} of :menutranslation, matching common usage.
- Bug fixes.
62b26040eb
Co-authored-by: dkearns <dougkearns@gmail.com>
