Fix 1: timeout field was being checked twice and did not return fail code on error
Fix 2: Tool did not return error code on single file check unsuccessful run
Signed-off-by: David Pascual <davherna@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
A manual method was mentioned with no specificity. Include
the --run command. Also update the troubleshooting section
to show what failure to restart the CA after configuration
looks like.
Import the IPA CA chain for manual execution.
Also fix up some $ -> # to indicate root is needed.
Related: https://pagure.io/freeipa/issue/9294
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Configures PKI to remove expired certificates and non-resolved
requests on a schedule.
This is geared towards ACME which can generate a lot of certificates
over a short period of time but is general purpose. It lives in
ipa-acme-manage because that is the primary reason for including it.
Random Serial Numbers v3 must be enabled for this to work.
Enabling pruning enables the job scheduler within CS and sets the
job user as the IPA RA user which has full rights to certificates
and requests.
Disabling pruning does not disable the job scheduler because the
tool is stateless. Having the scheduler enabled should not be a
problem.
A restart of PKI is required to apply any changes. This tool forks
out to pki-server which does direct writes to CS.cfg. It might
be easier to use our own tooling for this but this makes the
integration tighter so we pick up any improvements in PKI.
The "cron" setting is quite limited, taking only integer values
and *. It does not accept ranges, either - or /.
No error checking is done in PKI when setting a value, only when
attempting to use it, so some rudimentary validation is done.
Fixes: https://pagure.io/freeipa/issue/9294
Signed-off-by: Rob Crittenden rcritten@redhat.com
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The automember-rebuild task may require high CPU usage
if many users/hosts/groups are processed.
Add a note in the ipa automember-rebuild CLI output
and in the WebUI confirmation message.
Fixes: https://pagure.io/freeipa/issue/9320
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Avoid reading platform specific `/etc/resolv.conf` in `TestDNSResolver`
unit tests. Systems (e.g. sandboxes) may not have `/etc/resolv.conf`
or this file may not contain any configured name servers.
`TestDNSResolver` unit tests check only customized `nameservers`
property and should not depend on existence of `/etc/resolv.conf`.
Resolver accepts `configure` option.
https://dnspython.readthedocs.io/en/latest/resolver-class.html :
> configure, a bool. If True (the default), the resolver instance is
configured in the normal fashion for the operating system the resolver
is running on. (I.e. by reading a /etc/resolv.conf file on POSIX
systems and from the registry on Windows systems.)
Fixes: https://pagure.io/freeipa/issue/9319
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
freeipa-healthcheck changed some messages related to ipa-ca
DNS record validation in IPADNSSystemRecordsCheck. Include support
for it and retain backwards compatibility.
Fixes: https://pagure.io/freeipa/issue/9291
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
freeipa-healthcheck 0.12 includes a SUCCESS message if the
ipa-ca records are as expected so a user will know they
were checked. For that version and beyond test that it
is included.
Related: https://pagure.io/freeipa/issue/9291
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
With ff6e701b00 it was replaced
with `werkzeug`.
https://pypi.org/project/Paste/
> Paste is in maintenance mode and recently moved from bitbucket to
github. Patches are accepted to keep it on life support, but for the
most part, please consider using other options.
Fixes: https://pagure.io/freeipa/issue/9314
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
freeipa-healthcheck prechecks existance of `fips-mode-setup` and
reports if it's missing:
> "fips": "missing /bin/fips-mode-setup"
Fixes: https://pagure.io/freeipa/issue/9315
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This describes how the certificate pruning capability of PKI
introduced in v11.3.0 will be integrated into IPA, primarily for
ACME.
Related: https://pagure.io/freeipa/issue/9294
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When ipa trust-add is executed with --range-type ad-trust-posix,
the server tries to find the max uidnumber and max gidnumber
from AD domain controller.
The values are extracted from the entry
CN=<domain>,CN=ypservers,CN=ypServ30,CN=RpcServices,CN=System,<AD suffix>
in the msSFU30MaxUidNumber and msSFU30MaxGidNumber attributes.
msSFU30MaxUidNumber is required but not msSFU30MaxGidNumber.
In case msSFU30MaxGidNumber is missing, the code is currently assigning
a "None" value and later on evaluates the max between this value and
msSFU30MaxUidNumber. The max function cannot compare None and a list
of string and triggers an exception.
To avoid the exception, assign [b'0'] to max gid if msSFU30MaxGidNumber
is missing. This way, the comparison succeeds and max returns the
value from msSFU30MaxUidNumber.
Fixes: https://pagure.io/freeipa/issue/9310
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This change fixes rpminspect issues reported when building
for RHEL, like the following one:
Patch number 1001 (1001-Change-branding-to-IPA-and-Identity-Management.patch)
is missing a corresponding %patch1001 macro, usually in %prep.
Waiver Authorization: Anyone
Suggested Remedy:
The named patch is defined in the source RPM header (this means it has a
PatchN: definition in the spec file) but is not applied anywhere in the
spec file. It is missing a corresponding %patch macro and the spec file
lacks the %autosetup or %autopatch macros. You can fix this by adding
the appropriate %patch macro in the spec file (usually in the %prep
section). The number specified with the %patch macro corresponds to the
number used to define the patch at the top of the spec file. So Patch47
is applied with a %patch47 macro.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Francisco Trivino <ftrivino@redhat.com>
Extend 'makeapi --validate' to validate API Reference files too. If
differences are found between the generated and stored docs the
validation fails. This command is executed in our Azure pipelines, so
every time a developer opens a PR but forgets to update the API
Reference, the CI will fail.
Fixes: https://pagure.io/freeipa/issue/9287
Signed-off-by: Antonio Torres <antorres@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Replaced URL in Markdown Format with the proper reStructuredText markup
in file doc/workshop/12-external-idp-support.rst
Signed-off-by: Lenz Grimmer <lenz.grimmer@percona.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The installer is currently creating the samba domain object
before it adds the RID base and secondary RID base. As a consequence,
there is a window during which the sidgen plugin is active but
unable to generate SIDs (it requires the samba domain object to
find the domain SID and RID base to know where to start from).
There is no direct impact except the error log of 389ds that reports
ERR - get_ranges - [file ipa_sidgen_common.c, line 276]: Failed to convert LDAP entry to range struct.
This fix configures the RID base and secondary RID base before the
domain object is created, thus removing this window.
Fixes: https://pagure.io/freeipa/issue/9309
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
PKI can issue ACME certs only when the key type is rsa.
With version 2.0.0, certbot defaults to ecdsa key type,
and this causes test failures.
For now, force rsa when requesting an ACME certificate.
This change can be reverted when PKI fixes the issue
on their side (https://github.com/dogtagpki/pki/issues/4273)
Related: https://pagure.io/freeipa/issue/9298
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The client installer code can be called in 3 different ways:
- from ipa-client-install CLI
- from ipa-replica-install CLI if the client is not already installed
- from ipa-server-install
In the last case, the client installer is called with
options.on_master=True
As a result, it's skipping the part that is creating the krb5
configuration:
if not options.on_master:
nolog = tuple()
configure_krb5_conf(...)
The configure_krb5_conf method is the place where the krb5.conf file is
backup'ed with the extention ".ipabkp". For a master installation, this
code is not called and the ipabkp file does not exist => delete raises
an error.
When delete fails because the file does not exist, no need to log an
error message.
Fixes: https://pagure.io/freeipa/issue/9306
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Mark the test test_smb.py::TestSMB::test_smb_service_s4u2self as xfail.
Related: https://pagure.io/freeipa/issue/9124
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
https://pylint.pycqa.org/en/latest/user_guide/messages/error/unhashable-member.html:
> Emitted when a dict key or set member is not hashable (i.e. doesn't
define __hash__ method).
https://docs.python.org/3/library/stdtypes.html#dict.update:
> Update the dictionary with the key/value pairs from other, overwriting
existing keys. Return None.
update() accepts either another dictionary object or an iterable of
key/value pairs (as tuples or other iterables of length two). If keyword
arguments are specified, the dictionary is then updated with those
key/value pairs: d.update(red=1, blue=2).
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
https://pylint.pycqa.org/en/latest/user_guide/messages/convention/unnecessary-lambda-assignment.html:
> Used when a lambda expression is assigned to variable rather than
defining a standard function with the "def" keyword.
https://peps.python.org/pep-0008/#programming-recommendations:
> Always use a def statement instead of an assignment statement that
binds a lambda expression directly to an identifier:
def f(x): return 2*x
f = lambda x: 2*x
The first form means that the name of the resulting function object is
specifically ‘f’ instead of the generic ‘<lambda>’. This is more useful
for tracebacks and string representations in general. The use of the
assignment statement eliminates the sole benefit a lambda expression can
offer over an explicit def statement (i.e. that it can be embedded
inside a larger expression)
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
> Emitted when a local variable is accessed before its assignment took
place. Assignments in try blocks are assumed not to have occurred when
evaluating associated except/finally blocks. Assignments in except
blocks are assumed not to have occurred when evaluating statements
outside the block, except when the associated try block contains a
return statement.
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
`pipes` module is deprecated as of Python 3.11.
https://docs.python.org/3/library/pipes.html#module-pipes:
> Deprecated since version 3.11, will be removed in version 3.13: The
pipes module is deprecated (see PEP 594 for details).
IPA code used only `quote` function from `pipes` that in turn is
the alias for `shlex.quote` since Python 3.3:
9bce311ea4
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Most of `cyclic-import` issues reported by Pylint are false-positive
and they are already handled in the code, but several ones are the
actual errors.
Fixes: https://pagure.io/freeipa/issue/9232
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Fixes:
```
[E0611(no-name-in-module), ] No name 'parse' in module 'lxml.etree'
[E0611(no-name-in-module), ] No name 'murmurhash3' in module 'pysss_murmur'
```
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
There are several known problems with multiprocess mode.
For example, https://github.com/PyCQA/pylint/issues/3232.
In other words the lint result depends on the number of jobs.
The most correct report is expected for single process.
Fixes: https://pagure.io/freeipa/issue/9278
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
PEP 632 deprecates the distutils module. Replace
- distutils.spawn.find_executable with shutil.which
- distutils.log with logging
Related: https://pagure.io/freeipa/issue/9278
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
