Only a single cert in DER or PEM format would be loaded from the
provided file. Extend this to include PKCS#7 format and load all
certificates found in the file.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7579
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
"messagebus" is an old, archaic name for dbus. Upstream dbus has started
to move away from the old name. Let's use the modern term in FreeIPA,
too.
Fixes: https://pagure.io/freeipa/issue/7754
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Address a bug in the code block for attributeLevelRights for old clients.
The backward compatibility code for deprecated options was not triggered,
because the new name was checked against wrong dict.
Coverity Scan issue 323649, Copy-paste error
The copied code will not have its intended effect.
In postprocess_result: A copied piece of code is inconsistent with the
original (CWE-398)
See: Fixes: https://pagure.io/freeipa/issue/7753
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Fix Coverity finding CID 323644: logically dead code path
The code to determine whether NetBIOS name was already set or need to be
set after deriving it from a domain or asking a user for an interactive
input, was refactored at some point to avoid retrieving the whole LDAP
entry. Instead, it was provided with the actual NetBIOS name retrieved.
As result, a part of the code got neglected and was never executed.
Fix this code and provide a test that tries to test predefined,
interactively provided and automatically derived NetBIOS name depending
on how the installer is being run.
We mock up the actual execution so that no access to LDAP or Samba is
needed.
Fixes: https://pagure.io/freeipa/issue/7753
Reviewed-By: Christian Heimes <cheimes@redhat.com>
For smart card authentication, ipaapi must be able to access to sss-ifp.
During installation and upgrade, the ipaapi user is now added to
[ifp]allowed_uids.
The commit also fixes two related issues:
* The server upgrade code now enables ifp service in sssd.conf. The
existing code modified sssd.conf but never wrote the changes to disk.
* sssd_enable_service() no longer fails after it has detected an
unrecognized service.
Fixes: https://pagure.io/freeipa/issue/7751
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Increase log level to info by setting verbose=True and adding
a console format.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7408
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This was previously suppressed because of the log level in
an installation was set to error so it was never displayed
Keeping consistency and demoting it to debug since the
log level is increased to info.
Related: https://pagure.io/freeipa/issue/7408
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
During replica installation the local IP addresses should be
added to DNS but will fail because a string is being passed
to an argument expecting a list. Convert to a list before
passing in individual IPs.
Discovered when fixing https://pagure.io/freeipa/issue/7408
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Don't remove /root/.dogtag/pki-tomcat when performing step 1 of external
CA installation process. Dogtag 10.6.7 changed behavior and no longer
re-creates the client database in step 2.
Fixes: https://pagure.io/freeipa/issue/7742
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-backup gathers all the files needed for the backup, then compresses
the file and finally restarts the IPA services. When the backup is a
large file, the compression may take time and widen the unavailabity
window.
This fix restarts the services as soon as all the required files are
gathered, and compresses after services are restarted.
Fixes: https://pagure.io/freeipa/issue/7632
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Instead of hard-coding python3, the smart card advise script now uses
the current executable path from sys.executable as interpreter.
Fixes: https://pagure.io/freeipa/issue/7741
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When adding the option --setup-adtrust to ipa-replica-install,
we need to check that the package freeipa-server-trust-ad is
installed.
To avoid relying on OS-specific commands like yum, the check is instead
ensuring that the file /usr/share/ipa/smb.conf.empty is present
(this file is delivered by the package).
When the check is unsuccessful, ipa-replica-install exits with an error
message.
Fixes: https://pagure.io/freeipa/issue/7602
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When we define a group mapping for BUILTIN\Guests to 'nobody' group in
we run 'net groupmap add ...' with a default /etc/samba/smb.conf which
is now configured to use ipasam passdb module. We authenticate to LDAP
with GSSAPI in ipasam passdb module initialization.
If GSSAPI authentication failed (KDC is offline, for example, during
server upgrade), 'net groupmap add' crashes after ~10 attempts to
re-authenticate. This is intended behavior in smbd/winbindd as they
cannot work anymore. However, for the command line tools there are
plenty of operations where passdb module is not needed.
Additionally, GSSAPI authentication uses the default ccache in the
environment and a key from /etc/samba/samba.keytab keytab. This means
that if you'd run 'net *' as root, it will replace whatever Kerberos
tickets you have with a TGT for cifs/`hostname` and a service ticket to
ldap/`hostname` of IPA master.
Apply a simple solution to avoid using /etc/samba/smb.conf when we
set up the group mapping by specifying '-s /dev/null' in 'net groupmap'
call.
For upgrade code this is enough as in
a678336b8b we enforce use of empty
credentials cache during upgrade to prevent tripping on individual
ccaches from KEYRING: or KCM: cache collections.
Related: https://pagure.io/freeipa/issue/7705
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
On legacy systems which don't have cacerdir_rehash tool (provided by authconfig)
the generated advise script downloads this tool from project page and uses it.
After decommision of Fedorahosted and move of authconfig project to Pagure,
this url was not updated in FreeIPA project.
This patch updates the url.
https://pagure.io/freeipa/issue/7731
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
There were two separate issues:
1. If not enrolling on a pre-configured client then the ntp-server and
ntp-pool options are not being passed down to the client installer
invocation.
2. If the client is already enrolled then the ntp options are ignored
altogether.
In the first case simply pass down the options to the client
installer invocation.
If the client is pre-enrolled and NTP options are provided then
raise an exception.
https://pagure.io/freeipa/issue/7723
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
All Samba utilities load passdb modules from the configuration file. As
result, 'net groupmap' call would try to initialize ipasam passdb module
and that one would try to connect to LDAP using Kerberos authentication.
We should be running it after cifs/ principal is actually created in
ipa-adtrust-install or otherwise setting up group mapping will fail.
This only affects new installations. For older ones 'net groupmap' would
work just fine because adtrust is already configured and all principals
exist already.
A re-run of 'ipa-server-upgrade' is a workaround too but better to fix
the initial setup.
Related: https://pagure.io/freeipa/issue/7705
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If groups or hostgroups have been removed after automember rules have been
created using them, then automember-rebuild, automember-add, host-add and
more commands could fail.
A new command has been added to the ipa tool:
ipa automember-find-orphans --type={hostgroup,group} [--remove]
This command retuns the list of orphan automember rules in the same way as
automember-find. With the --remove option the orphan rules are also removed.
The IPA API version has been increased and a test case has been added.
Using ideas from a patch by: Rob Crittenden <rcritten@redhat.com>
See: https://pagure.io/freeipa/issue/6476
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The zonemgr validator and handler performs additional encodings for IDNA
support. In Python 3, the extra steps are no longer necessary because
arguments are already proper text and stderr can handle text correctly.
This also fixes 'b' prefix in error messages like:
option zonemgr: b'empty DNS label'
Fixes: https://pagure.io/freeipa/issue/7711
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replace six.moves and six.StringIO/BytesIO imports with cannonical
Python 3 packages.
Note: six.moves.input behaves differently than builtin input function.
Therefore I left six.moves.input for now.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
As for now the 'Add' dialog title, which is initialized within
details of the entity, contains translated concatenated texts,
like:
'Add ${other_entity} into ${entity} ${primary_key}',
where 'other_entity' and 'entity' are also translatable texts.
This construction is used via method 'show_add_dialog' of
association_facet for the all 'Add' actions within details
of entities.
The concatenation leads to a bad quality translation and
should be changed to an entire sentence.
From now a mentioned title is taken from a spec and should be
specified explicitly.
Fixes: https://pagure.io/freeipa/issue/7712
Fixes: https://pagure.io/freeipa/issue/7714
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Add' dialog should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
As for now the default title of 'add' dialog is set to something
like 'Add ${entity}', where 'entity' is also translatable text.
Such construction is used via method 'adder_dialog' of Entity
for the all 'Add' actions.
This leads to a bad quality translation and should be changed to
an entire sentence.
From now a mentioned title is taken from a spec and should be
specified explicitly.
Fixes: https://pagure.io/freeipa/issue/7707
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
On Python 3, six.text_type (singular) is an alias for str.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
In Python 3, six.string_types is just an alias for str.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Python 2 had old style and new style classes. Python 3 has only new
style classes. There is no point to subclass from object any more.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
tox / pytest is complaining about lots and lots of invalid escape
sequences in our code base. Sprinkle raw strings or backslash escapes
across the code base to fix most occurences of:
DeprecationWarning: invalid escape sequence
There is still one warning that keeps repeating, though:
source:264: DeprecationWarning: invalid escape sequence \d
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'unprovision' dialog
should be specified explicitly in the spec and should be an entire
sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details table of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7704
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
The method setup_lightweight_ca_key_retrieval is called on
server upgrade and checks first if it needs to be executed or if
a previous upgrade already did the required steps.
The issue is that it looks for setup_lwca_key_retrieval in sysupgrade.state
but writes setup_lwca_key_retieval (with a missing r).
The fix consistently uses setup_lwca_key_retieval (as older installations
may already contain this key in sysupgrade.state).
Fixes https://pagure.io/freeipa/issue/7688
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Samba 4.9 became a bit more strict about creating a local NT token and a
failure to resolve or create BUILTIN\Guests group will cause a rejection
of the connection for a successfully authenticated one.
Add a default mapping of the nobody group to BUILTIN\Guests.
BUILTIN\Guests is a special group SID that is added to the NT token for
authenticated users.
For real guests there is 'guest account' option in smb.conf which
defaults to 'nobody' user.
This was implicit behavior before as 'guest account = nobody' by
default would pick up 'nobody' group as well.
Fixes: https://pagure.io/freeipa/issue/7705
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of 'Remove' dialog,
which is initialized within details of the entity, should be
specified explicitly in the spec and should be an entire sentence.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
As for now the default title of remove dialogs, which are
initialized from 'association' facet, is set to something like
'Remove ${other_entity} from ${entity} ${primary_key}', where
'other_entity' and 'entity' are also translatable texts.
This construction is used via method 'show_remove_dialog'
of 'association' facet for the all 'Delete' actions within details
of entities.
Such concatenation leads to a bad quality translation and
should be changed to an entire sentence.
From now a mentioned title is taken from a spec and should be
specified explicitly.
Fixes: https://pagure.io/freeipa/issue/7702
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
ipa-advise config-client-for-smart-card-auth is now using authselect
instead of authconfig, but authselect enable-feature with-smartcard
does not set pam_cert_auth=True in /etc/sssd/sssd.conf.
As a result, smart card auth on a client fails.
The fix adds a step in ipa-advise to configure pam_cert_auth=True.
The fix also forces the use of python3 interpreter, and handles
newer versions of SSSD which use OpenSSL instead of NSS (the trusted
CA certs must be put into /etc/sssd/pki/sssd_auth_ca_db.pem
Fixes https://pagure.io/freeipa/issue/7532
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
To improve translation quality the title of Remove dialog
should be specified explicitly in the spec and should be an
entire sentence.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
As for now the default title of remove dialogs is set to
'Remove ${entity}', where 'entity' is also translatable text.
This construction is used via method 'create_remove_dialog'
of Search facet for the all association 'Delete' actions of
entities.
The such concatenation leads to a bad quality translation and
should be changed to an entire sentence.
From now a mentioned title is taken from a spec and should be
specified explicitly.
Fixes: https://pagure.io/freeipa/issue/7699
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
Create HBAC and a sudo rule for allowing members of the admins
group to run sudo on all enrolled hosts.
https://pagure.io/freeipa/issue/7538
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There is no need to set options.promote to false anymore for a server
installation in the install function.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This is related to the DL0 code removal. FIRST_MASTER describes this
mode a lot better.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
iWithout DL0 support the custodia mode can be used to determine if a
server or replica will be installed. Therefore the use of config.promote
can be removed.
A new check has been added to make sure the mode known in
get_custodia_instance.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This function is used to load the replica file. Without DL0 support this
is not needed at all anymore.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
create_replica_config is not imported anymore from
ipaserver.install.installutils.
The promote argument has been removed from these functions and function
calls:
- install_replica_ds
- ds.create_replica
- install_krb
- krbinstance.create_replica
- install_http
- httpinstance.create_instance
The function install_check has been removed completely as it is only used
to prepare the DL0 installation.
All DL0 specific code has been removed from the install function.
The varaibles promote, installer.promote/options.promote and config.promote
have bene removed.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The methods _is_promote has been removed from all classes as this has only
been used internally to check if the domain level is correct.
The check if the installer object has the attribute replica_file has been
modified to use the new variable replica_install defined in
CompatServerReplicaInstall instead.
The DL0 specific code from ServerInstallInterface.__init__ has been removed
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replica files are DL0 specific therefore the knob extension for
replica_file has been removed. Also the code that is only executed if
replica_file is not None.
The new variable replica_install has been added which is used in
ServerInstallInterface.__init__
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The argument was not used at all.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The code to add missing KRA certificates has been removed from install_check
as it was only reached if replica_config is not None and promote was False
for DL0 replica installations. Also the other places.
Promote is now hard set to True if replica_config is not None in install
for later use in krainstance.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Promote is now hard set to True in create_replica for later use in
_get_replication_manager.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replica files are DL0 specific therefore all the code that is related to
replica files have been removed An additional check for the new minimal
domain level has been added. The use of extra args results in an error as
this was only needed for the replica file.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
cainstance.replica_ca_install_check is only used in ca.install_check if
replica_config is not None (replica installation). As it is immediately
stopped if promote is not set, therefore it can be removed.
The check for cafile in ca.install_check has been dropped. promote is set
to True in ca.install_step_0 if replica_config is not None for
cainstance.configure_instance.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This is part of the DL0 code removal. As ipa-replica-prepare is only needed
and useful for domain level 0, the script can be removed.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
To be translatable messages should be marked with '@i18n' and
present in "i18n_messages" dictionary.
Fixes: https://pagure.io/freeipa/issue/7619
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
Make this page message translatable as other parts of IPA framework.
Fixes: https://pagure.io/freeipa/issue/7640
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
Make this page message translatable as other parts of IPA framework.
Fixes: https://pagure.io/freeipa/issue/7640
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
In ipa-replica-install, many components use their own instance
of the FileStore to backup configuration files to the pre-install
state. This causes issues when the calls are mixed, like for
instance:
ds.do_task1_that_backups_file (using ds.filestore)
http.do_task2_that_backups_file (using http.filestore)
ds.do_task3_that_backups_file (using ds.filestore)
because the list of files managed by ds.filestore does not include
the files managed by http.filestore, and the 3rd call would remove
any file added on 2nd call.
The symptom of this bug is that ipa-replica-install does not save
/etc/httpd/conf.d/ssl.conf and subsequent uninstallation does not
restore the file, leading to a line referring to ipa-rewrite.conf
that prevents httpd startup.
The installer should consistently use the same filestore.
Fixes https://pagure.io/freeipa/issue/7684
Reviewed-By: Christian Heimes <cheimes@redhat.com>
commit 7284097 (Delay enabling services until end of installer)
introduced a regression in replica installation.
When the replica requests a cert for PKINIT, a check is done
to ensure that the hostname corresponds to a machine with a
KDC service enabled (ipaconfigstring attribute of
cn=KDC,cn=<hostname>,cn=masters,cn=ipa,cn=etc,$BASEDN must contain
'enabledService').
With the commit mentioned above, the service is set to enabled only
at the end of the installation.
The fix makes a less strict check, ensuring that 'enabledService'
or 'configuredService' is in ipaconfigstring.
Fixes: https://pagure.io/freeipa/issue/7566
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-server-install is checking if the forwarder(s) specified with
--forwarder argument support DNSSEC. When the --no-dnssec-validation
option is added, the installer should not perform the check.
Fixes: https://pagure.io/freeipa/issue/7666
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Setting ca_host caused replication failures on DL0
because it was trying to connect to wrong CA host.
Trying to avoid corner-case in ipaserver/plugins/dogtag.py
when api.env.host nor api.env.ca_host had not CA configured
and there was ca_host set to api.env.ca_host variable.
See: https://pagure.io/freeipa/issue/7566
Resolves: https://pagure.io/freeipa/issue/7629
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Translatable messages should be marked with @i18n. Also
these messages should be presented in "i18n_messages" dictionary.
Fixes: https://pagure.io/freeipa/issue/7641
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Serhii Tsymbaliuk <stsymbal@localhost.localdomain>
Commit 811b0fdb46 introduced a regression
when configuring replication with a master < 3.3
Even if 389-ds schema is extended with nsds5ReplicaReleaseTimeout,
nsds5ReplicaBackoffMax and nsDS5ReplicaBindDnGroupCheckInterval
attributes, it will return UNWILLING_TO_PERFORM when a mod
operation is performed on the cn=replica entry.
This patch ignores the error and logs a debug msg.
See: https://pagure.io/freeipa/issue/7617
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Some commands print tracebacks or unclear error message when
they are called on a machine where ipa packages are installed but
IPA is not configured.
Consistently report 'IPA is not configured on this system' in this
case.
Related to https://pagure.io/freeipa/issue/6261
Reviewed-By: Christian Heimes <cheimes@redhat.com>
--no-host-dns is supposed to avoid all DNS lookups so pass
this as the force value when creating the host in a replica
installation.
https://pagure.io/freeipa/issue/7656
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
There was an issue with ipa-server-upgrade and it was
showing an error while upgrading:
DN... does not exists or haven't been updated, caused
by not moving pointer to file begining when re-reading.
Resolves: https://pagure.io/freeipa/issue/7644
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The indirect members need to be calculated and the member
attributes converted. This is normally done in
baseldap::LDAPRetrieve but these methods provide their
own execute() in order to handle the option values.
Update sudorule_add|remove_option tests to include check
that converted user/group exists in the proper format.
https://pagure.io/freeipa/issue/7649
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
To be translatable messages should be marked with '@i18n' and
present in "i18n_messages" dictionary.
Fixes: https://pagure.io/freeipa/issue/7621
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
The old domain level check to suggest to use ipa-replica-prepare has been
converted to make sure that domain fulfills minimal domain level
requirement (no DL0).
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
As there is the minimal domain level setting MIN_DOMAIN_LEVEL, it should
be used instead of DOMAIN_LEVEL_0.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This pull should not remove code, therefore it is needed to add addtional
conditionals to calm down pylint beacuse of unreachable code.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Raise "Domain level 0 is not supported anymore" error if there are
remainaing args after parsing. Remove all "DOMAIN LEVEL 0" and
"DOMAIN LEVEL 1" prefixes from the man page.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
In the case that the domain level is set to 0 or replica_file is set (not
None) an error will be raised.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The template directory /var/log/dirsrv/slapd-X could be created with the
wrong SELinux context.
Related to: https://pagure.io/freeipa/issue/7662
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The session directory /etc/httpd/alias/ could be created with the wrong
SELinux context. Therefore httpd was not able to write to this directory.
Fixes: https://pagure.io/freeipa/issue/7662
Related-to: 49b4a057f1 (Create missing
/etc/httpd/alias for ipasession.key)
Reviewed-By: Christian Heimes <cheimes@redhat.com>
In the case that enabledService is not found ipaConfigString kdc entry, a
NotFound error was raised without setting the reason. This resulted in a
traceback.
Fixes: https://pagure.io/freeipa/issue/7652
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-replica-install --kra-install can fail when the topology already has
a KRA, but replica is installed from a master with just CA. In that
case, Custodia may pick a machine that doesn't have the KRA auditing and
signing certs in its NSSDB.
Example:
* master with CA
* replica1 with CA and KRA
* new replica gets installed from master
The replica installer now always picks a KRA peer.
The change fixes test scenario TestInstallWithCA1::()::test_replica2_ipa_dns_install
Fixes: https://pagure.io/freeipa/issue/7518
See: https://pagure.io/freeipa/issue/7008
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
