/var/lib/ipa/backup is defined in ipaplatform.paths as paths.IPA_BACKUP_DIR
Remove all instances of /var/lib/ipa/backup/ in ipa_backup.py.
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
When the destination directory cannot store the complete backup
ipa-backup fails but does not explain why.
This commit adds error-checking to db2ldif(), db2bak() and
finalize_backup() and enhances the error message.
Fixes: https://pagure.io/freeipa/issue/7647
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Tibor Dudlák <tdudlak@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
Dogtag PKI typically takes around 10 seconds to start and respond to
requests. Dogtag uses a simple systemd service, which means systemd is
unable to detect when Dogtag is ready. Commands like ``systemctl start``
and ``systemctl restart`` don't block and wait until the CA is up. There
have been various workarounds in Dogtag and IPA.
Systemd has an ExecStartPost hook to run programs after the main service
is started. The post hook blocks systemctl start and restart until all
post hooks report ready, too. The new ipa-pki-wait-running script polls
on port 8080 and waits until the CA subsystem returns ``running``.
Related: https://pagure.io/freeipa/issue/7916
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The IPA specific env vars KRB5_KTNAME and KRB5CCNAME are now defined in
a instance specific ipa-env.conf unit file.
Fixes: https://pagure.io/freeipa/issue/7860
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replace occurences of ('cn', 'masters'), ('cn', 'ipa'), ('cn', 'etc')
with api.env.container_masters.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replace get_ldap_uri() + LDAPClient() with new LDAPClient constructors
like LDAPClient.from_realm().
Some places now use LDAPI with external bind instead of LDAP with simple
bind. Although the FQDN *should* resolve to 127.0.0.1 / [::1], there is
no hard guarantee. The draft
https://tools.ietf.org/html/draft-west-let-localhost-be-localhost-04#section-5.1
specifies that applications must verify that the resulting IP is a
loopback API. LDAPI is always local and a bit more efficient, too.
The simple_bind() method also prevents the caller from sending a
password over an insecure line.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add LDAPClient.from_realm(), LDAPClient.from_hostname_secure(), and
LDAPClient.from_hostname_plain() constructors.
The simple_bind() method now also refuses to transmit a password over a
plain, unencrypted line.
LDAPClient.from_hostname_secure() uses start_tls and FreeIPA's CA cert
by default. The constructor also automatically disables start_tls for
ldaps and ldapi connections.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The helper function realm_to_serverid() and realm_to_ldap_uri() are
useful outside the server installation framework. They are now in
ipapython.ipaldap along other helpers for LDAP handling in FreeIPA.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-backup gathers all the files needed for the backup, then compresses
the file and finally restarts the IPA services. When the backup is a
large file, the compression may take time and widen the unavailabity
window.
This fix restarts the services as soon as all the required files are
gathered, and compresses after services are restarted.
Fixes: https://pagure.io/freeipa/issue/7632
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The site and module configs are split on Debian, server setup needs
to match that.
Fixes: https://pagure.io/freeipa/issue/7554
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-backup and ipa-restore now use GnuPG 2 for asymmetric encryption, too.
The gpg2 command behaves a bit different and requires a gpg2 compatible
config directory. Therefore the --keyring option has been deprecated.
The backup and restore tools now use root's GPG keyring by default.
Custom configuration and keyring can be used by setting GNUPGHOME
environment variables.
Fixes: https://pagure.io/freeipa/issue/7560
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Without GSSPROXY_CONF being backed up, we would get this error
"ipa: ERROR: No valid Negotiate header in server response"
when running any ipa command after a backup restore.
This commit also fixes the tests:
- TestBackupAndRestore::test_full_backup_and_restore
- TesttBackupAndRestore::test_full_backup_and_restore_with_selinux_booleans_off
https://pagure.io/freeipa/issue/7473
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Add absolute_import from __future__ so that pylint
does not fail and to achieve python3 behavior in
python2.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Removing ntpd configuration files and entry from LDAP.
Add parameter and rename method for restoring forced time
services. Addressing some requests for change too.
Remove unused path for chrony-helper.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Completely remove ipaserver/install/ntpinstance.py
This is no longer needed as chrony client configuration
is now handled in ipa-client-install.
Part of ipclient/install/client.py related to ntp configuration
has been refactored a bit to not lookup for srv records
and/or run chrony if not necessary.
Addresses: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Several run() calls used hard-coded paths rather than pre-defined paths
from ipaplatform.paths. The patch fixes all places that I was able to
find with a simple search.
The fix simplifies Darix's port of freeIPA on openSuSE.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Prepare CertDB and NSSDatabase to support sqlite DB format. NSSDatabase
will automatically detect and use either old DBM or new SQL format. Old
databases are not migrated yet.
https://pagure.io/freeipa/issue/7049
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7247
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Remove all object-specific loggers, with the exception of `Plugin.log`,
which is now deprecated. Replace affected logger calls with module-level
logger calls.
Deprecate object-specific loggers in `ipa_log_manager.get_logger`.
Reviewed-By: Martin Basti <mbasti@redhat.com>
DeprecationWarning: The SafeConfigParser class has been renamed
to ConfigParser in Python 3.2. This alias will be removed in
future versions. Use ConfigParser directly instead.
https://fedorahosted.org/freeipa/ticket/4985
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Set `pkinit_anchors` in `krb5.conf` to a CA certificate bundle of CAs
trusted to issue KDC certificates rather than `/etc/ipa/ca.crt`.
Set `pkinit_pool` in `krb5.conf` to a CA certificate bundle of all CAs
known to IPA.
Make sure both bundles are exported in all installation code paths.
https://pagure.io/freeipa/issue/6831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
anonymous kinit using keytab never worked so we may safely remove all
code that requests/uses it.
https://pagure.io/freeipa/issue/6830
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
On backup-restore, the ipa unit file for httpd was not backed up.
This file however contains setting for httpd to communicate with
gssproxy so not backing it up will result in httpd not knowing
how to get credentials.
https://pagure.io/freeipa/issue/6748
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
KDC certificate pair was added but is not included in backup which
might cause issues when restoring the IPA service.
https://pagure.io/freeipa/issue/6748
Reviewed-By: Martin Basti <mbasti@redhat.com>
The "ipaCert" nicknamed certificate is not required to be
in /var/lib/ipa/radb NSSDB anymore as we were keeping a copy
of this file in a separate file anyway. Remove it from there
and track only the file. Remove the IPA_RADB_DIR as well as
it is not required anymore.
https://fedorahosted.org/freeipa/ticket/5695https://fedorahosted.org/freeipa/ticket/6680
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
HTTPS connection to certificate server requires client authentication
so we need a file with client certificate and private key prior to
its first occurence which happens during migration of certificate
profiles to LDAP.
https://fedorahosted.org/freeipa/ticket/5695https://fedorahosted.org/freeipa/ticket/6392
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
This is in preparation for separating out the user under which the
ipa api framework runs as.
This commit also removes certs.NSS_DIR to avoid confusion and replaces
it where appropriate with the correct NSS DB directory, either the old
HTTPD_ALIAS_DIR ot the RA DB IPA_RADB_DIR. In some cases its use is
removed altogether as it was simply not necessary.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Stop using memcache, use mod_auth_gssapi filesystem based ccaches.
Remove custom session handling, use mod_auth_gssapi and mod_session to
establish and keep a session cookie.
Add loopback to mod_auth_gssapi to do form absed auth and pass back a
valid session cookie.
And now that we do not remove ccaches files to move them to the
memcache, we can avoid the risk of pollutting the filesystem by keeping
a common ccache file for all instances of the same user.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
ipa-backup now backs up /root/kracert.p12. The file contains the
certs and encrypted private keys for KRA transport, storage and audit.
Closes: https://fedorahosted.org/freeipa/ticket/6659
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Some API contexts are used to modify global state (e.g. files in /etc
and /var). These contexts do not support confdir overrides. Initialize
the API with an explicit confdir argument to paths.ETC_IPA.
The special contexts are:
* backup
* cli_installer
* installer
* ipctl
* renew
* restore
* server
* updates
The patch also corrects the context of the ipa-httpd-kdcproxy script to
'server'.
https://fedorahosted.org/freeipa/ticket/6389
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
CACERT depends on ipaplatform.
Replace all uses of CACERT with paths.IPA_CA_CRT and remove CACERT.
https://fedorahosted.org/freeipa/ticket/6474
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
* move IPAdmin methods to LDAPClient
* add extra arguments (cacert, sasl_nocanon) to LDAPClient.__init__()
* add host, port, _protocol to LDAPClient (parsed from ldap_uri)
* create get_ldap_uri() method to create ldap_uri from former
IPAdmin.__init__() arguments
* replace IPAdmin with LDAPClient + get_ldap_uri()
* remove ununsed function argument hostname from
enable_replication_version_checking()
https://fedorahosted.org/freeipa/ticket/6461
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
* Rename do_external_bind to external_bind
* Remove user_name argument in external_bind() and always set it
to effective user name
https://fedorahosted.org/freeipa/ticket/6461
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Check for import errors with pylint to make sure new python package
dependencies are not overlooked.
https://fedorahosted.org/freeipa/ticket/6418
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Unused variables may:
* make code less readable
* create dead code
* potentialy hide issues/errors
Enabled check should prevent to leave unused variable in code
Check is locally disabled for modules that fix is not clear or easy or have too many occurences of
unused variables
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
This file allows daemon tmpfiles.d to re-create the dirs in volatile
directories like /var/run or /var/lock. Without this file Dirsrv will
not start.
https://fedorahosted.org/freeipa/ticket/6165
Reviewed-By: Petr Spacek <pspacek@redhat.com>
The module is used only on the server, so there's no need to have it in
ipalib, which is shared by client and server.
https://fedorahosted.org/freeipa/ticket/5988
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Fixes current reimports and enables pylint check for them
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Don't put any IPA certificates to /etc/pki/nssdb - IPA itself uses
/etc/ipa/nssdb and IPA CA certificates are provided to the system using
p11-kit. Remove leftovers on upgrade.
https://fedorahosted.org/freeipa/ticket/5592
Reviewed-By: David Kupka <dkupka@redhat.com>
Without calling os.chmod(), umask is effective and may cause that
directory is created with permission that causes failure.
This can be related to https://fedorahosted.org/freeipa/ticket/5520
Reviewed-By: Tomas Babej <tbabej@redhat.com>
The ipautil.run function now returns an object with returncode and
output are accessible as attributes.
The stdout and stderr of all commands are logged (unless skip_output is given).
The stdout/stderr contents must be explicitly requested with a keyword
argument, otherwise they are None.
This is because in Python 3, the output needs to be decoded, and that can
fail if it's not decodable (human-readable) text.
The raw (bytes) output is always available from the result object,
as is "leniently" decoded output suitable for logging.
All calls are changed to reflect this.
A use of Popen in cainstance is changed to ipautil.run.
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
