ipa cert-show, ipa cert-revoke and ipa cert-remove-hold do not
print meaningful info when called on a non-existent cert id:
Certificate operation cannot be completed: Unable to communicate
with CMS
Propagate the reason from the HTTP message in order to print
'Certificate ID 0x.. not found'
Fixes: https://pagure.io/freeipa/issue/8704
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
IPA traditionally allowed to add names not found in IPA LDAP to external
attributes. This is used to allow, for example, a local system user or
group be present in a SUDO rule.
With membership validator, we can actually check validity of the names
against both IPA users/groups and users/groups from trusted domains.
If in future we decide to reject a local system's objects, then all it
would take is to switch reject_failures to True.
Fixes: https://pagure.io/freeipa/issue/3226
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Allow specifying AD users and groups from trusted Active Directory
forests in `ipa sudorule-add/remove-runasuser/runasgroup` family of
commands.
IPA provides 'ipasudorunasextuser' and 'ipasudorunasextusergroup' LDAP
attributes to record 'external' objects referenced in SUDO rules for
specifying the target user and group to run the commands allowed in the
SUDO rule.
Use member type validators to 'ipa sudorule-add/remove-runasuser/runasgroup'
family of commands and rely on member type validators from 'idviews'
plugin to resolve trusted objects.
Referencing fully qualified names for users and groups from trusted
Active Directory domains in IPA SUDOERs schema attributes is supported
in SSSD 2.4 or later.
RN: IPA now supports users and groups from trusted Active Directory
RN: domains in SUDO rules to specify runAsUser/runAsGroup properties
RN: without an intermediate non-POSIX group membership
Fixes: https://pagure.io/freeipa/issue/3226
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Allow specifying AD users and groups from trusted Active Directory
forests in `ipa sudorule-add/remove-user` family of commands.
SSSD uses single attribute 'externalUser' for IPA to pull 'external'
objects referenced in SUDO rules. This means both users and groups are
represented within the same attribute, with groups prefixed with '%',
as described in sudoers(5) man page.
Add member type validators to 'ipa sudorule-add/remove-user' family
commands and rely on member type validators from 'idviews' plugin to
resolve trusted objects.
Referencing fully qualified names for users and groups from trusted
Active Directory domains in 'externalUser' attribute of SUDO rules is
supported in SSSD 2.4 or later.
RN: IPA now supports adding users and groups from trusted Active
RN: Directory domains in SUDO rules without an intermediate non-POSIX
RN: group membership
Fixes: https://pagure.io/freeipa/issue/3226
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Register extended validator for users from trusted domains to be called
through add_external_pre_callback() in sudorules and other plugins.
The callbacks allow to validate user names as following:
- if user name passes basic user name validator it is accepted, otherwise
- if user name can be resolved to any user in IPA or in a trusted
domain, it is accepted
- otherwise the name is rejected
Fixes: https://pagure.io/freeipa/issue/3226
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
It was possible to add external members without any validation. Any
object that was not found in IPA LDAP was considered an external object
and a command such as sudorule could have added it to the list of values
for externalUser attribute.
With member validator support, real external members from trusted
domains can be differentiated from the objects that were not found in
IPA and in trusted domains.
Use information from the ID Views plugin to treat external objects
accordingly. Not found objects will be part of the error messaging
instead.
Fixes: https://pagure.io/freeipa/issue/3226
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
baseldap.py:add_external_pre_callback() allows to redefine validators
used to validate member names. Originally this was done to allow
hostname validation and reused default validators associated with other
parameter types.
Provide extension of the validator callbacks to allow fine grained
validation strategy. This is helpful in case we want to apply an
alternative validation strategy in case default validator fails.
New validators can be added to 'member_validator' registry in a similar
way to how API objects are registered:
from .baseldap import member_validator
@member_validator(membertype='foo')
def my_new_validator(ldap, dn, keys, options, value):
<validate value here>
Arguments passed to the validator are arguments passed to the
add_external_pre_callback() augmented with the value to validate.
Fixes: https://pagure.io/freeipa/issue/3226
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: Peter Keresztes Schmidt <carbenium@outlook.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
winbindd expects forest topology information blob to find out child
domains. We should store it in LDAP and let ipasam to retrieve it.
In fact, ipasam already supports updating and loading this information
but during 'ipa trust-fetch-domains' we didn't provide it.
Make sure the blob is preserved after it was retrieved and also updated
when we fetch forest topology information.
Fixes: https://pagure.io/freeipa/issue/8576
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In order to simplify the build process between upstream FreeIPA
and downstream builds (such as CentOS Stream) we are changing
some file references from FreeIPA to IPA (and Identity Management).
https://pagure.io/freeipa/issue/8669
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
On a failed permission update if the generated ACI is
invalid then the updated permission is rolled back.
Add the virtual relationship attributes to list of attributes
to be ignored when rolling back the entry.
This relies on the current order in the LDAPObject
relationships field where member and memberof are the first
two values.
https://pagure.io/freeipa/issue/8646
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
kwargs is redefined to set the `noextrawhitespace` parameter
from the Str class to `False`.
Fixes: https://pagure.io/freeipa/issue/7599
Signed-off-by: Antonio Torres Moríñigo <atorresm@protonmail.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
PTR records in zones other than in-addr.arpa and in6.arpa are legal,
e.g. DNS-SD [RFC6763] uses such records. If in a reverse zone
proceed with the existing checks, otherwise just accept the record.
Fixes: https://pagure.io/freeipa/issue/5566
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This allows non-plugin components to import the RestClient
classes.
Removed code that only imported pki if in_server was True. This
was legacy code from when the plugins were also loaded in the
client.
Left the ra_plugin stanza for now. This is part of the old
abstraction that allowed for different CA plugins.
https://pagure.io/freeipa/issue/8524
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Commit cfad7af35d added a check to ensure a
system has sufficient amount of memory. The feature uses psutil to get
available memory. On import psutil opens files in /proc which can result in
an SELinux violations and Python exception.
PermissionError: [Errno 13] Permission denied: '/proc/stat'
Fixes: https://pagure.io/freeipa/issue/8512
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This will ensure uniqueuess and that the ACI has the right
datatype without the caller worrying about it.
https://pagure.io/freeipa/issue/8443
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
--name-from-ip will generate a zone name so there is no point in
the user providing one. If one is provided and doesn't match the
generated name then a validation exception is raised.
https://pagure.io/freeipa/issue/8446
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rafael Guterres Jeffman <rjeffman@redhat.com>
The command dnsforwardzone-add is assuming that the dns.rrset.RRset
type stores "items" as a list. With dnspython 2.0 this is not true
as a dict is used instead.
As a consequence, in order to get the first record, it is not possible
to use items[0]. As dict and list are both iterables, next(iter(items))
can be used in order to be compatible with dnspython 1.16 and 2.0.
Fixes: https://pagure.io/freeipa/issue/8481
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
`dnspython` 2.0.0 has many changes and several deprecations like:
```
> dns.resolver.resolve() has been added, allowing control of whether
search lists are used. dns.resolver.query() is retained for backwards
compatibility, but deprecated. The default for search list behavior can
be set at in the resolver object with the use_search_by_default
parameter. The default is False.
> dns.resolver.resolve_address() has been added, allowing easy
address-to-name lookups.
```
The new class `DNSResolver`:
- provides the compatibility layer
- defaults the previous behavior (the search list configured in the
system's resolver configuration is used for relative names)
- defaults lifetime to 15sec (determines the number of seconds
to spend trying to get an answer to the question)
Fixes: https://pagure.io/freeipa/issue/8383
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
PKIConnection now defaults to specifying verify=True. We've introduced
a new parameter, cert_paths, to specify additional paths (directories or
files) to load as certificates. Specify the IPA CA certificate file so
we can guarantee connections succeed and validate the peer's certificate.
Point to IPA CA certificate during pkispawn
Bump pki_version to 10.9.0-0.4 (aka -b2)
Fixes: https://pagure.io/freeipa/issue/8379
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1849155
Related: https://github.com/dogtagpki/pki/pull/443
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1426572
Signed-off-by: Alexander Scheel <ascheel@redhat.com>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Update 'ca' plugin doc to mention which permissions are required for
the various commands. Also mention that CAs must first be disabled
before they can be deleted.
Part of: https://fedorahosted.org/freeipa/ticket/5011
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Currently ca-del disables the target CA before deleting it.
Conceptually, this involves two separate permissions: modify and
delete. A user with delete permission does not necessarily have
modify permission.
As we head toward enforcing IPA permissions in Dogtag, it is
necessary to decouple disablement from deletion, otherwise the
disable operation shall fail if the user does not have modify
permission. Although it introduces an additional step for
administrators, the process is consistent, required permissions map
1:1 to the operations, and the error messages make it clear what
needs to happen (i.e. disable first).
Part of: https://fedorahosted.org/freeipa/ticket/5011
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa cert-show wrongly displays all certs as Revoked.
The dogtag plugin code is checking if the JSON data received
from dogtag contains a RevocationReason with:
if 'RevocationReason' in resp:
but the value can be None.
Replace the check with
if 'RevocationReason' in resp and esp['RevocationReason'] is not None:
as this will execute the code only if there is a value
and it is not None.
Fixes: https://pagure.io/freeipa/issue/8394
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Update ra.get_certificate to use the Dogtag REST API. This change
is being done as part of the Dogtag GSS-API authentication effort
because the servlet-based method expects an internal Dogtag user.
It is less intrusive to just change FreeIPA to call the REST API
instead (which is also part of an existing ticket).
Depends on https://pagure.io/dogtagpki/issue/2601 (which was merged
and released long ago).
Part of: https://pagure.io/freeipa/issue/3473
Part of: https://pagure.io/freeipa/issue/5011
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Outside of virtual commands themselves there is no way to evaluate
access to perform a virtual operation. Such a capability will be
needed for Dogtag-based certificate request validation using
Kerberos proxy credentials.
Add the 'check_operation_access' method for explicit virtual
operation access checks. Refactor 'VirtualCommand.check_access()'
to use it.
Part of: https://pagure.io/freeipa/issue/5011
Part of: https://pagure.io/freeipa/issue/6423
Reviewed-By: Christian Heimes <cheimes@redhat.com>
According to datetime.utcfromtimestamp() method documentation[1],
this and similar methods fail for dates past 2038 and can be replaced by
the following expression on the POSIX compliant systems:
datetime(1970, 1, 1, tzinfo=timezone.utc) + timedelta(seconds=timestamp)
Make sure to use a method that at least allows to import the timestamps
properly to datetime objects on 32-bit platforms.
[1] https://docs.python.org/3/library/datetime.html#datetime.datetime.utcfromtimestamp
Fixes: https://pagure.io/freeipa/issue/8378
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Some places have to use the old name because it's part of the stable API
or stable LDAP attributes.
See: https://tools.ietf.org/id/draft-knodel-terminology-01.html
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The message displayed before is now limited to the OTP
sync form, for which it was written originally.
A new message is introduced for the PW reset form,
which clarifies the usage of the OTP field.
Fixes: https://pagure.io/freeipa/issue/5628
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
The 'cert_request' command accumulates DNS names from the CSR,
before checking that all IP addresses in the CSR are reachable from
those DNS names. Before adding a DNS name to the set, we check that
that it corresponds to the FQDN of a known host/service principal
(including principal aliases). When a DNS name maps to a
"alternative" principal (i.e. not the one given via the 'principal'
argument), this check was not being performed correctly.
Specifically, we were looking for the 'krbprincipalname' field on
the RPC response object directly, instead of its 'result' field.
To resolve the issue, dereference the RPC response to its 'result'
field before invoking the '_dns_name_matches_principal' subroutine.
Fixes: https://pagure.io/freeipa/issue/8368
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add builder for association adder dialog which allows to override behavior of the component.
Replace default implementation with a custom one for idoverrideuser.
Replace text filter with 'ID view' select box in the idoverrideuser dialog.
Ticket: https://pagure.io/freeipa/issue/8335
Signed-off-by: Serhii Tsymbaliuk <stsymbal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
It should be ipanthomedirectorydrive and not ipanthomedirectoryrive.
This fixes showing the field in Web UI and also should fix CLI as it
probably never worked.
Signed-off-by: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Under some search conditions (in particular, when user is
specified), the CA sub-search of cert-find command throws an error
on CA-less deployments. Do not execute the CA sub-search on CA-less
deployments.
Fixes: https://pagure.io/freeipa/issue/8369
Reviewed-By: Christian Heimes <cheimes@redhat.com>
It was found that if an account was created with a name corresponding to
an account local to a system, such as 'root', was created via IPA, such
account could access any enrolled machine with that account, and the local
system privileges. This also bypass the absence of explicit HBAC rules.
root principal alias
-------------------
The principal "root@REALM" is now a Kerberos principal alias for
"admin". This prevent user with "User Administrator" role or
"System: Add User" privilege to create an account with "root" principal
name.
Modified user permissions
-------------------------
Several user permissions no longer apply to admin users and filter on
posixaccount object class. This prevents user managers from modifying admin
acounts.
- System: Manage User Certificates
- System: Manage User Principals
- System: Manage User SSH Public Keys
- System: Modify Users
- System: Remove Users
- System: Unlock user
``System: Unlock User`` is restricted because the permission also allow a
user manager to lock an admin account. ``System: Modify Users`` is restricted
to prevent user managers from changing login shell or notification channels
(mail, mobile) of admin accounts.
New user permission
-------------------
- System: Change Admin User password
The new permission allows manipulation of admin user password fields. By
default only the ``PassSync Service`` privilege is allowed to modify
admin user password fields.
Modified group permissions
--------------------------
Group permissions are now restricted as well. Group admins can no longer
modify the admins group and are limited to groups with object class
``ipausergroup``.
- System: Modify Groups
- System: Remove Groups
The permission ``System: Modify Group Membership`` was already limited.
Notes
-----
Admin users are mostly unaffected by the new restrictions, except for
the fact that admins can no longer change krbPrincipalAlias of another
admin or manipulate password fields directly. Commands like ``ipa passwd
otheradmin`` still work, though. The ACI ``Admin can manage any entry``
allows admins to modify other entries and most attributes.
Managed permissions don't install ``obj.permission_filter_objectclasses``
when ``ipapermtargetfilter`` is set. Group and user objects now have a
``permission_filter_objectclasses_string`` attribute that is used
by new target filters.
Misc changes
------------
Also add new exception AlreadyContainsValueError. BaseLDAPAddAttribute
was raising a generic base class for LDAP execution errors.
Fixes: https://pagure.io/freeipa/issue/8326
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1810160
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Second part of adding support to manage IPA as a user from a trusted
Active Directory forest.
Treat user ID overrides as members of groups and roles.
For example, adding an Active Directory user ID override as a member of
'admins' group would make it equivalent to built-in FreeIPA 'admin'
user.
We already support self-service operations by Active Directory users if
their user ID override does exist. When Active Directory user
authenticates with GSSAPI against the FreeIPA LDAP server, its Kerberos
principal is automatically mapped to the user's ID override in the
Default Trust View. LDAP server's access control plugin uses membership
information of the corresponding LDAP entry to decide how access can be
allowed.
With the change, users from trusted Active Directory forests can
manage FreeIPA resources if the groups are part of appropriate roles or
their ID overrides are members of the roles themselves.
Fixes: https://pagure.io/freeipa/issue/7255
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
First part of the required changes to merge a plugin to manage IPA as
a trusted Active Directory user.
It is not possible to omit ID view in IPA API but a client might specify
empty ID view. Up right now the empty view was considered an error. This
prevented Web UI from resolving ID overrides in a group member adder
dialog.
Default to 'Default Trust View' if the ID view is None or empty string
(''). Do this only for user ID overrides, as we do not support adding
group ID overrides as group members in a plugin to manage IPA as a
trusted Active Directory user[1].
Being a group member means an object in LDAP must have an object class
that allows 'memberOf' attribute because 389-ds 'memberof' plugin will
attempt to link back to the object from the group. Allow use of
'nsMemberOf' object class in ID overrides.
Fixes: https://pagure.io/freeipa/issue/7255
[1] https://github.com/abbra/freeipa-adusers-admins
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When using `ipa -e in_server=True console` on IPA master, the whole IPA
framework is loaded in the same process ('ipa console'). The context
defined for this configuration is 'cli'. Some trust-related operations
need to load Samba bindings and guard itself to 'lite' and 'server'
contexts.
Upon reviewing these cases I came to conclusion that these guards are
unnecessary. It is enough to require that the context is in the server
code.
Allow these operations if we are operating in server mode. This allows
to debug trust-related issued directly in the IPA console on IPA trust
controllers.
Signed-of-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Make it possible to create a managed permission with
ipapermbindruletype="self". The ACI will have bind rule
'(userdn = "ldap:///self")'.
Example
-------
Allow users to modify their own fasTimezone and fasIRCNick attributes:
```
managed_permissions = {
"System: Self-Modify FAS user attributes": {
"ipapermright": {"write"},
"ipapermtargetfilter": ["(objectclass=fasuser)"],
"ipapermbindruletype": "self",
"ipapermdefaultattr": ["fasTimezone", "fasIRCNick"],
}
}
```
See: https://github.com/fedora-infra/freeipa-fas/pull/107
Fixes: https://pagure.io/freeipa/issue/8348
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
See: https://pagure.io/freeipa/issue/8317
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
LDAP attribute options aren't enforced in the schema, thus we strip them
when checking attribute conformance with the schema. This, however, can
leave us with a situation when multiple base LDAP attribute names are
present in the list of attribute names to check.
Use set of attribute names to deduplicate the list.
Fixes: https://pagure.io/freeipa/issue/8328
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Changing default group on automember rules page is too easy.
Add a confirmation dialog to avoid misclick in the case.
Ticket: https://pagure.io/freeipa/issue/8322
Signed-off-by: Serhii Tsymbaliuk <stsymbal@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Service delegation rules and targets deal with Kerberos principals.
As FreeIPA has separate service objects for hosts and Kerberos services,
it is not possible to specify host principal in the service delegation
rule or a target because the code assumes it always operates on Kerberos
service objects.
Simplify the code to add and remove members from delegation rules and
targets. New code looks up a name of the principal in cn=accounts,$BASEDN
as a krbPrincipalName attribute of an object with krbPrincipalAux object
class. This search path is optimized already for Kerberos KDC driver.
To support host principals, the specified principal name is checked to
have only one component (a host name). Service principals have more than
one component, typically service name and a host name, separated by '/'
sign. If the principal name has only one component, the name is
prepended with 'host/' to be able to find a host principal.
The logic described above allows to capture also aliases of both
Kerberos service and host principals. Additional check was added to
allow specifying single-component aliases ending with '$' sign. These
are typically used for Active Directory-related services like databases
or file services.
RN: service delegation rules and targets now allow to specify hosts as
RN: a rule or a target's member principal.
Fixes: https://pagure.io/freeipa/issue/8289
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Fix is to display the proper principal in error message
while attempting to delete required principal.
related: https://pagure.io/freeipa/issue/7695
Signed-off-by: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
service-del deletes services by DN and LDAP DNs are compared
case-insensitive. Make check_required_principal() compare the
service name case insensitive.
Fixes: https://pagure.io/freeipa/issue/8308
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
