Changing the --forwarder option to accept a loopback IP.
Previously, an error would be raised, now we just show a
warning message.
Fixes: https://pagure.io/freeipa/issue/5801
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Replace custom file_exists() and dir_exists() functions with proper
functions from Python's stdlib.
The change also gets rid of pylint's invalid bad-python3-import error,
https://github.com/PyCQA/pylint/issues/1565
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Some API contexts are used to modify global state (e.g. files in /etc
and /var). These contexts do not support confdir overrides. Initialize
the API with an explicit confdir argument to paths.ETC_IPA.
The special contexts are:
* backup
* cli_installer
* installer
* ipctl
* renew
* restore
* server
* updates
The patch also corrects the context of the ipa-httpd-kdcproxy script to
'server'.
https://fedorahosted.org/freeipa/ticket/6389
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
Sprinkle 'pylint disable' comments over the code base to silence a bunch
of pylint warnings on Python 3. All silenced warnings are harmless and
not bugs.
https://fedorahosted.org/freeipa/ticket/4985
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Web service needs restarting after bindinstance is created
to pick up changes done to /etc/resolv.conf. This change should
be included anytime DNS is installed therefore it makes sense
to move it to the common code.
https://fedorahosted.org/freeipa/ticket/6392
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
* ipca-ca-install: Use a single ldap connection for the entire
script. Connecting with ccache in promote is not needed.
* ipa-cacert-manage: Always connect to ldap, since renew and install
are the only options and renew seems to need ldap connection even
for self signed certificates.
* ipa-compat-manage: Use one ldap connection for the entire script.
Replaced try-finally with proper disconnect, code block reindented.
* ipa-csreplica-manage: Properly establish and close the ldap connection.
* ipa-dns-install: Proper connect, disconnect to ldap.
* ipa-kra-install: Proper connect/disconnect for install and uninstall.
* ipa-ldap-update: Proper connect and disconnect to ldap.
* ipa-nis-manage: Proper connect/disconnect for ldap. Try-finally removed
and code block reindented.
* ipa-replica-manage: Proper connect/disconnect to ldap.
* ipa-replica-prepare: Connect added to validate_options(), where api is
initialized and disconnected added at the end of run. Reconnect in
ask_for_options() to validate directory manager password.
* ipa-server-certinstall: Use api.Backend.ldap2 for ldap connections.
* ipa-server-upgrade: Connect to and disconnect from api.Backend.ldap2.
https://fedorahosted.org/freeipa/ticket/6461
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
This commit removes unused variables or rename variables as "expected to
be unused" by using "_" prefix.
This covers only cases where fix was easy or only one unused variable
was in a module
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Forward policy defaults to 'first' if no IP address belonging to a private
or reserved ranges is detected on local interfaces (RFC 6303).
Defaults to only if a private IP address is detected.
This prevents problems with BIND automatic empty zones because
conflicting zones cannot be disabled unless forwarding policy == only.
https://fedorahosted.org/freeipa/ticket/5710
Reviewed-By: Martin Basti <mbasti@redhat.com>
This option specified forward policy for global forwarders.
The value is put inside /etc/named.conf.
https://fedorahosted.org/freeipa/ticket/5710
Reviewed-By: Martin Basti <mbasti@redhat.com>
ipactl is not aware of new services installed later, if ipactl restart
or start has not been executed.
This commit is workaround, proper fix may need to improve ipactl.
https://fedorahosted.org/freeipa/ticket/5262
Reviewed-By: David Kupka <dkupka@redhat.com>
Wildcard imports should not be used.
Check for wildcard imports has been enabled in pylint.
Pylint note: options 'wildcard-import' causes too much false positive
results, so instead it I used 'unused-wildcard-import' option which has almost
the same effect.
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
When DNS is already installed somewhere in topology we should not check for
zone overlap because it would always say that we are overlapping our own domain.
ipa-replica-install already does that but ipa-dns-install did not.
https://fedorahosted.org/freeipa/ticket/5564
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Introducing '--auto-reverse' option. When specified reverse records for
all server's IP addresses are checked and when record nor reverse zone
does not exist reverse zone is created.
Reviewed-By: Petr Spacek <pspacek@redhat.com>
Raise an error when the domain already exists. This can be overriden using
--force or --allow-zone-overlap options.
https://fedorahosted.org/freeipa/ticket/3681
Reviewed-By: Petr Spacek <pspacek@redhat.com>
In Python 3, `print` is no longer a statement. Call it as a function
everywhere, and include the future import to remove the statement
in Python 2 code as well.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
This commit allows to replace or disable DNSSEC key master
Replacing DNSSEC master requires to copy kasp.db file manually by user
ipa-dns-install:
--disable-dnssec-master DNSSEC master will be disabled
--dnssec-master --kasp-db=FILE This configure new DNSSEC master server, kasp.db from old server is required for sucessful replacement
--force Skip checks
https://fedorahosted.org/freeipa/ticket/4657
Reviewed-By: Petr Spacek <pspacek@redhat.com>
This is required modification to be able move to new installers.
DNS subsystem will be installed by functions in this module in each of
ipa-server-install, ipa-dns-install, ipa-replica-install install
scripts.
https://fedorahosted.org/freeipa/ticket/4468
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
ipa-dns-install now uses LDAPI/autobind to connect to DS during the setup of
DNS/DNSSEC-related service and thus makes -p option obsolete.
Futhermore, now it makes more sense to use LDAPI also for API Backend
connections to DS and thus all forms of Kerberos auth were removed.
This fixes https://fedorahosted.org/freeipa/ticket/4933 and brings us closer
to fixing https://fedorahosted.org/freeipa/ticket/2957
Reviewed-By: Martin Basti <mbasti@redhat.com>
BindInstance et al. now use STARTTLS to set up secure connection to DS during
ipa-dns-install. This fixes https://fedorahosted.org/freeipa/ticket/4933
Reviewed-By: Martin Basti <mbasti@redhat.com>
The man pages for various FreeIPA setup tools are more descriptive on how to
configure multiple DNS forwarders than the corresponding cli help. This patch
makes the cli help more verbose now for the following tools:
* ipa-dns-install
* ipa-replica-install
* ipa-server-install
https://fedorahosted.org/freeipa/ticket/4465
Reviewed-By: Martin Basti <mbasti@redhat.com>
Find, verify and configure all IP addresses that can be used to reach the server
FreeIPA is being installed on. Ignore some IP address only if user specifies
subset of detected addresses using --ip-address option.
This change simplyfies FreeIPA installation on multihomed and dual-stacked servers.
https://fedorahosted.org/freeipa/ticket/3575
Reviewed-By: Martin Basti <mbasti@redhat.com>
This patch adds the capability of installing a Dogtag KRA
to an IPA instance. With this patch, a KRA is NOT configured
by default when ipa-server-install is run. Rather, the command
ipa-kra-install must be executed on an instance on which a Dogtag
CA has already been configured.
The KRA shares the same tomcat instance and DS instance as the
Dogtag CA. Moreover, the same admin user/agent (and agent cert) can
be used for both subsystems. Certmonger is also confgured to
monitor the new subsystem certificates.
To create a clone KRA, simply execute ipa-kra-install <replica_file>
on a replica on which a Dogtag CA has already been replicated.
ipa-kra-install will use the security domain to detect whether the
system being installed is a replica, and will error out if a needed
replica file is not provided.
The install scripts have been refactored somewhat to minimize
duplication of code. A new base class dogtagintance.py has
been introduced containing code that is common to KRA and CA
installs. This will become very useful when we add more PKI
subsystems.
The KRA will install its database as a subtree of o=ipaca,
specifically o=ipakra,o=ipaca. This means that replication
agreements created to replicate CA data will also replicate KRA
data. No new replication agreements are required.
Added dogtag plugin for KRA. This is an initial commit providing
the basic vault functionality needed for vault. This plugin will
likely be modified as we create the code to call some of these
functions.
Part of the work for: https://fedorahosted.org/freeipa/ticket/3872
The uninstallation option in ipa-kra-install is temporarily disabled.
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Petr Viktorin <pviktori@redhat.com>
Add the IPA version, and vendor version if applicable, to the beginning
of admintool logs -- both framework and indivitual tools that don't yet
use the framework.
This will make debugging easier.
https://fedorahosted.org/freeipa/ticket/4219
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Deprecate this option and do not offer it in installation tools.
Without this option enabled, advanced DNS features like DNSSEC
would not work.
https://fedorahosted.org/freeipa/ticket/3962
Drops the code from ipa-server-install, ipa-dns-install and the
BindInstance itself. Also changed ipa-upgradeconfig script so
that it does not set zone_refresh to 0 on upgrades, as the option
is deprecated.
https://fedorahosted.org/freeipa/ticket/3632
All installers that handle Kerberos auth, have been altered to use
private ccache, that is ipa-server-install, ipa-dns-install,
ipa-replica-install, ipa-ca-install.
https://fedorahosted.org/freeipa/ticket/3666
Some parts of install scripts used only ccache name as returned by
krbV.CCache.name attribute. However, when this name is used again
to initialize krbV.CCache object or when it is used in KRB5CCNAME
environmental variable, it fails for new DIR type of CCACHE.
We should always use both CCACHE type and name when referring to
them to avoid these crashes. ldap2 backend was also updated to
accept directly krbV.CCache object which contains everything we need
to authenticate with ccache.
https://fedorahosted.org/freeipa/ticket/3381
Previous fix for ticket #3161 caused ipa-{server,dns}-install to
skip creation of reverse zone when running in unattended mode. Make
sure that reverse zone is created also in unattended mode (unless
--no-reverse is specified).
https://fedorahosted.org/freeipa/ticket/3161
A reverse zone was always configured in the interactive installer
even if you answered "no" to the reverse zone question. The only way
to not confiugre it was the --no-reverse option.
https://fedorahosted.org/freeipa/ticket/3161
When a new reverse zone is to be generated based on an IP address without
a network prefix length, we need to use some default value. While netaddr
library default ones (32b for IPv4 and 128b for IPv6) are not very sensible
we should use the defaults already applied in installers. That is 24b for
IPv6 and 64 for IPv6.
Test case has been added to cover the new default.
https://fedorahosted.org/freeipa/ticket/2461
* Convert every string specifying a DN into a DN object
* Every place a dn was manipulated in some fashion it was replaced by
the use of DN operators
* Add new DNParam parameter type for parameters which are DN's
* DN objects are used 100% of the time throughout the entire data
pipeline whenever something is logically a dn.
* Many classes now enforce DN usage for their attributes which are
dn's. This is implmented via ipautil.dn_attribute_property(). The
only permitted types for a class attribute specified to be a DN are
either None or a DN object.
* Require that every place a dn is used it must be a DN object.
This translates into lot of::
assert isinstance(dn, DN)
sprinkled through out the code. Maintaining these asserts is
valuable to preserve DN type enforcement. The asserts can be
disabled in production.
The goal of 100% DN usage 100% of the time has been realized, these
asserts are meant to preserve that.
The asserts also proved valuable in detecting functions which did
not obey their function signatures, such as the baseldap pre and
post callbacks.
* Moved ipalib.dn to ipapython.dn because DN class is shared with all
components, not just the server which uses ipalib.
* All API's now accept DN's natively, no need to convert to str (or
unicode).
* Removed ipalib.encoder and encode/decode decorators. Type conversion
is now explicitly performed in each IPASimpleLDAPObject method which
emulates a ldap.SimpleLDAPObject method.
* Entity & Entry classes now utilize DN's
* Removed __getattr__ in Entity & Entity clases. There were two
problems with it. It presented synthetic Python object attributes
based on the current LDAP data it contained. There is no way to
validate synthetic attributes using code checkers, you can't search
the code to find LDAP attribute accesses (because synthetic
attriutes look like Python attributes instead of LDAP data) and
error handling is circumscribed. Secondly __getattr__ was hiding
Python internal methods which broke class semantics.
* Replace use of methods inherited from ldap.SimpleLDAPObject via
IPAdmin class with IPAdmin methods. Directly using inherited methods
was causing us to bypass IPA logic. Mostly this meant replacing the
use of search_s() with getEntry() or getList(). Similarly direct
access of the LDAP data in classes using IPAdmin were replaced with
calls to getValue() or getValues().
* Objects returned by ldap2.find_entries() are now compatible with
either the python-ldap access methodology or the Entity/Entry access
methodology.
* All ldap operations now funnel through the common
IPASimpleLDAPObject giving us a single location where we interface
to python-ldap and perform conversions.
* The above 4 modifications means we've greatly reduced the
proliferation of multiple inconsistent ways to perform LDAP
operations. We are well on the way to having a single API in IPA for
doing LDAP (a long range goal).
* All certificate subject bases are now DN's
* DN objects were enhanced thusly:
- find, rfind, index, rindex, replace and insert methods were added
- AVA, RDN and DN classes were refactored in immutable and mutable
variants, the mutable variants are EditableAVA, EditableRDN and
EditableDN. By default we use the immutable variants preserving
important semantics. To edit a DN cast it to an EditableDN and
cast it back to DN when done editing. These issues are fully
described in other documentation.
- first_key_match was removed
- DN equalty comparison permits comparison to a basestring
* Fixed ldapupdate to work with DN's. This work included:
- Enhance test_updates.py to do more checking after applying
update. Add test for update_from_dict(). Convert code to use
unittest classes.
- Consolidated duplicate code.
- Moved code which should have been in the class into the class.
- Fix the handling of the 'deleteentry' update action. It's no longer
necessary to supply fake attributes to make it work. Detect case
where subsequent update applies a change to entry previously marked
for deletetion. General clean-up and simplification of the
'deleteentry' logic.
- Rewrote a couple of functions to be clearer and more Pythonic.
- Added documentation on the data structure being used.
- Simplfy the use of update_from_dict()
* Removed all usage of get_schema() which was being called prior to
accessing the .schema attribute of an object. If a class is using
internal lazy loading as an optimization it's not right to require
users of the interface to be aware of internal
optimization's. schema is now a property and when the schema
property is accessed it calls a private internal method to perform
the lazy loading.
* Added SchemaCache class to cache the schema's from individual
servers. This was done because of the observation we talk to
different LDAP servers, each of which may have it's own
schema. Previously we globally cached the schema from the first
server we connected to and returned that schema in all contexts. The
cache includes controls to invalidate it thus forcing a schema
refresh.
* Schema caching is now senstive to the run time context. During
install and upgrade the schema can change leading to errors due to
out-of-date cached schema. The schema cache is refreshed in these
contexts.
* We are aware of the LDAP syntax of all LDAP attributes. Every
attribute returned from an LDAP operation is passed through a
central table look-up based on it's LDAP syntax. The table key is
the LDAP syntax it's value is a Python callable that returns a
Python object matching the LDAP syntax. There are a handful of LDAP
attributes whose syntax is historically incorrect
(e.g. DistguishedNames that are defined as DirectoryStrings). The
table driven conversion mechanism is augmented with a table of
hard coded exceptions.
Currently only the following conversions occur via the table:
- dn's are converted to DN objects
- binary objects are converted to Python str objects (IPA
convention).
- everything else is converted to unicode using UTF-8 decoding (IPA
convention).
However, now that the table driven conversion mechanism is in place
it would be trivial to do things such as converting attributes
which have LDAP integer syntax into a Python integer, etc.
* Expected values in the unit tests which are a DN no longer need to
use lambda expressions to promote the returned value to a DN for
equality comparison. The return value is automatically promoted to
a DN. The lambda expressions have been removed making the code much
simpler and easier to read.
* Add class level logging to a number of classes which did not support
logging, less need for use of root_logger.
* Remove ipaserver/conn.py, it was unused.
* Consolidated duplicate code wherever it was found.
* Fixed many places that used string concatenation to form a new
string rather than string formatting operators. This is necessary
because string formatting converts it's arguments to a string prior
to building the result string. You can't concatenate a string and a
non-string.
* Simplify logic in rename_managed plugin. Use DN operators to edit
dn's.
* The live version of ipa-ldap-updater did not generate a log file.
The offline version did, now both do.
https://fedorahosted.org/freeipa/ticket/1670https://fedorahosted.org/freeipa/ticket/1671https://fedorahosted.org/freeipa/ticket/1672https://fedorahosted.org/freeipa/ticket/1673https://fedorahosted.org/freeipa/ticket/1674https://fedorahosted.org/freeipa/ticket/1392https://fedorahosted.org/freeipa/ticket/2872
SOA serial autoincrement is a requirement for major DNS features,
e.g. zone transfers or DNSSEC. Enable it by default in named.conf
both for new and upgraded installations. Name of the bind-dyndb-ldap
option is "serial_autoincrement".
From now on, idnsSOAserial attribute also has to be put to
replication agreement exclude list as serial will be incremented
on each DNS server separately and won't be shared. Exclude list
has to be updated both for new replication agreements and the
current ones.
Minimum number of connections for bind-dyndb-ldap has been rised
to 4 connections, the setting will be updated during package upgrade.
https://fedorahosted.org/freeipa/ticket/2554
From IPA version 3.0, the persistent search is a preferred mechanism
to for DNS zone list management. It will be also a requirement for
several bind-dyndb-ldap features, like SOA serial automatic updates
or DNSSEC.
Make this mechanism default in ipa-server-install and ipa-dns-istall.
https://fedorahosted.org/freeipa/ticket/2524
All of our install/admin scripts had a try/except block calling the
main function and handling common exceptions. These were copy-pasted
from each other and modified to various levels of sophistication.
This refactors them out of installers to a single function, which
includes a final pass/fail message for all of the scripts.
Non-install scripts that set up the same log handler levels for
stderr and log file are not changed, as it's not possible to log
to only the logfile without changing the logger configuration.
https://fedorahosted.org/freeipa/ticket/2071
