Address column in A, AAAA DNS records was exented of redirection capabilities.
Redirection dialog is shown after a click on a value.
Dialog does following steps:
1) fetch all dns zones
2) find most accurate reverse zone for IP address
2 -fail) show error message, stop
3) checks if target record exists in the zone
3 -fail) show 'dns record create link', stop
4) redirects
Click on 'dns record create link':
1) creates record
1 -fail) show error, stop
2) redirects
https://fedorahosted.org/freeipa/ticket/1975
Fix wrong handling of strings in --setattr/--addattr/--delattr.
These changes make it possible to use Bytes in --setattr/--addattr/
--delattr without errors.
Fixes managing SSH keys on command-line
https://fedorahosted.org/freeipa/ticket/754
This patch adds a new multivalue param "sshpubkey" for specifying SSH public
keys to both user and host objects. The accepted value is base64-encoded
public key blob as specified in RFC4253, section 6.6.
Additionaly, host commands automatically update DNS SSHFP records when
requested by user.
https://fedorahosted.org/freeipa/ticket/754
* hbacrule: Internationalize HBAC rule "all" category exceptions
https://fedorahosted.org/freeipa/ticket/2267
* hbactest: Use internationalized names (doc) instead of names
for output items
Also don't convert result to bool, `not` does it implicitly
* ipalib.output: Internationalize descriptions of some standard entries
In user group adder dialog, the "Is this a POSIX group?" was replaced with "POSIX group".
In host search facet, the "Enrolled?" was replaced with "Enrolled".
https://fedorahosted.org/freeipa/ticket/2353
This patch switches to named ("%(name)s") instead of positional ("%s")
substitutions for internationalized strings, so translators can
reorder the words.
This fixes https://fedorahosted.org/freeipa/ticket/2179 (xgettext no
longer gives warnings).
Also, some i18n calls are rewritten to translate the template before
substitutions, not after.
This patch adds a session manager and support for caching
authentication in the session. Major elements of the patch are:
* Add a session manager to support cookie based sessions which
stores session data in a memcached entry.
* Add ipalib/krb_utils.py which contains functions to parse ccache
names, format principals, format KRB timestamps, and a KRB_CCache
class which reads ccache entry and allows one to extract information
such as the principal, credentials, credential timestamps, etc.
* Move krb constants defined in ipalib/rpc.py to ipa_krb_utils.py so
that all kerberos items are co-located.
* Modify javascript in ipa.js so that the IPA.command() RPC call
checks for authentication needed error response and if it receives
it sends a GET request to /ipa/login URL to refresh credentials.
* Add session_auth_duration config item to constants.py, used to
configure how long a session remains valid.
* Add parse_time_duration utility to ipalib/util.py. Used to parse the
session_auth_duration config item.
* Update the default.conf.5 man page to document session_auth_duration
config item (also added documentation for log_manager config items
which had been inadvertantly omitted from a previous commit).
* Add SessionError object to ipalib/errors.py
* Move Kerberos protection in Apache config from /ipa to /ipa/xml and
/ipa/login
* Add SessionCCache class to session.py to manage temporary Kerberos
ccache file in effect for the duration of an RPC command.
* Adds a krblogin plugin used to implement the /ipa/login
handler. login handler sets the session expiration time, currently
60 minutes or the expiration of the TGT, whichever is shorter. It
also copies the ccache provied by mod_auth_kerb into the session
data. The json handler will later extract and validate the ccache
belonging to the session.
* Refactored the WSGI handlers so that json and xlmrpc could have
independent behavior, this also moves where create and destroy
context occurs, now done in the individual handler rather than the
parent class.
* The json handler now looks up the session data, validates the ccache
bound to the session, if it's expired replies with authenicated
needed error.
* Add documentation to session.py. Fully documents the entire process,
got questions, read the doc.
* Add exclusions to make-lint as needed.
The homedirectory argument had a default_from '/home/<name>', ignoring
the ipahomesrootdir config setting. This patch removes that default,
and adds a test case for ipahomesrootdir.
https://fedorahosted.org/freeipa/ticket/2332
The login shell had the same problem. Again this patch removes the
client-side default and adds a test.
Building the home directory from the default is changed to use
posixpath.join instead of string formatting and ad-hoc cleanup,
and to use '/home' instead of failing when the ipahomesrootdir
setting is not present for some reason.
Convert from a freeform string into a enumeration.
Only values currently allowed are AllowLMhash and AllowNThash.
To add more than one value on the command-line either specify
--ipaconfigstring multiple times or add the values comma-separated.
https://fedorahosted.org/freeipa/ticket/1433
External members (users and hosts) are assumed when doing member
management on certain attributes. If the member isn't in IPA it
is assumed to be external. When doing member management we need
to sift through the list of failures and pull out all those
that were simply not found in IPA.
https://fedorahosted.org/freeipa/ticket/1734
The example mistakenly showed how to allow "employees" to edit
addresses of "managers".
This fixes the example by switching the two options.
https://fedorahosted.org/freeipa/ticket/2317
Indirect automount nesting is achieved by adding a key that references
another map. This isn't heirarchical, in fact, you can have multiple
duplicate keys all pointing at the same map, which itself is mounted
in other places. It can be a real mess if you want.
In any case, a submount map has its information set to
"-fstype=autofs <type>:<map>"
The type can be any valid automount type: file, nis, yp, ldap, etc. We
are going to hardcode ldap in when we create these using
automountmap-add-indirect. If a user wants a different type they can
create the key themselves (or edit it later).
Here is an example of creating a submount:
$ ipa automountlocation-add baltimore
$ ipa automountmap-add-indirect baltimore auto.share --mount=/share
$ ipa automountmap-add-indirect baltimore --parentmap=auto.share --mount=sub auto.sub
$ ipa automountkey-add baltimore auto.sub --key=share --info=attic:/share
$ ls /share/sub/share
builds lost+found
This looks like:
etc/auto.master:
/- /etc/auto.direct
/share /etc/auto.share
---------------------------
/etc/auto.direct:
---------------------------
/etc/auto.share:
sub -fstype=autofs ldap:auto.sub
maps not connected to /etc/auto.master:
---------------------------
/etc/auto.sub:
share attic:/share
I've also added a catch-all when using the tofiles function. We were
missing any maps that weren't attached to auto.master. They will now
be shown along with whatever keys they have.
https://fedorahosted.org/freeipa/ticket/1268
CLI command help contains a documentation for all options that can
be passed to commands. However, help strings for positional
arguments are not included.
This patch uses an OptionParser description field to list all
command arguments as OptionParser does not have a native support
to provide such information to user.
https://fedorahosted.org/freeipa/ticket/1974
Improve migration help topic so that it easier understandable:
- Add missing list of Topic commands
- Add one more example to demonstrate migration abilities
- Add breaks to too long lines to improve readibility
https://fedorahosted.org/freeipa/ticket/2174
When a new DNS record is being added to DNS zone via command
ipa dnsrecord-add ZONE @
and the target ZONE does not exist it returns ObjectclassViolation
which may confuse users. Make sure that standard DNS Zone NotFound
exception is returned.
https://fedorahosted.org/freeipa/ticket/2270
Since A6 is an obsolete RR type, no DNS part option was created.
This is, however, not consistent with the rest of per-type API
and may cause problems. This patch adds at least a DNS part for
raw A6 record data so that the record type is treated consistently.
This patch also fixes interactive mode for A6 records. Their data
were not detected correctly as dnsrecord_add didn't expect
a number in DNS part option name.
https://fedorahosted.org/freeipa/ticket/2309
NSEC record needs special treatment as it is not composed from
a fixed set of DNS parts divided by space, but it contains
a multivalued DNS part "types" containing a list of RR types
it covers.
There was already a special method for parsing raw NSEC record
to DNS parts, but the other direction was missing. This patch
adds special NSEC convertor to fix this issue.
https://fedorahosted.org/freeipa/ticket/2307
TXT record validation fails to parse the record if it contains
spaces. Standard DNS part parser uses a space to divide record
parts. A special parser thus need to be implemented for this RR
type.
https://fedorahosted.org/freeipa/ticket/2306
These two situations in netgroup-add need to be distinguished:
1) Netgroup cannot be added because a hostgroup with the same name
created a colliding managed netgroup
2) Another native netgroup with the same name exists
This patch checks the colliding netgroup and raise appropriate
error message based on this finding.
https://fedorahosted.org/freeipa/ticket/2069
The user details page was modified to show the password expiration
date next to the existing password field.
Fixed problem resetting password in self-service mode. The JSON
interface for the passwd command requires the username to be
specified although the equivalent CLI command doesn't require it.
Ticket #2064
Web UI is caching records. Currently only possible ways how to display updated record which was changed elsewhere - ie. in CLI are:
* refresh page in browser (takes really long on slow vpns)
* search facet: change filter, find, change filter back, find
* entity details: go to search, select other entry, go back to search, select original entry
* association facet: same as entity details
These are unconvenient methods.
This patch adds Refresh button to search, details and association facet. This button executes facets refresh method.
https://fedorahosted.org/freeipa/ticket/2051
Host object has a virtual attribute "managing" containing all hosts
it manages (governed by managedBy attribute). This patch also adds
standard membership filtering options:
--man-hosts=HOSTS: Only hosts managing _all_ HOSTS are returned
--not-man-hosts=HOSTS: Only hosts which do not manage _any_ host
in HOSTS are returned
https://fedorahosted.org/freeipa/ticket/1675
macaddress is a multi-valued attribute and we allow multiple entries.
This is from the objectclass ieee802device. This is added manually when
doing a mod or add and not as a default to support existing host entries
that do not have this objectclass. If this were added to the defaults
then existing hosts missing this objectclass would not be found by
host-find.
It is possible to get ethers data out of nss by configuring nsswitch.conf
to use ldap for ethers and running getent ethers <hostname>
I tested nslcd and it only returned one macaddress value.
https://fedorahosted.org/freeipa/ticket/1132
When deleting an HBAC rule we need to ensure that an SELinux user
map isn't pointing at it. We need to take what is the cn of the HBAC
rule and see if that rule exists, then return the dn to that rule.
The search was not being done properly and wasn't enforcing uniqueness.
It could have returned partial matches as well (so tests for the
search test).
https://fedorahosted.org/freeipa/ticket/2269
All DNS record part options in dnsrecord commands need to be
optional so that all of them are not required in every dnsrecord
command. However, FreeIPA API then does not include an information
which DNS record part options are optional in term of creating
a new DNS record. For example, LOC record option "latitude seconds"
is not needed to add a new LOC record.
This patch adds a flag "dnsrecord_optional" to all such options so
that this information is available for any other UI reading the
FreeIPA API.
https://fedorahosted.org/freeipa/ticket/2208
This patch modifies the status attributes in users, DNS zones,
HBAC/sudo rules, HBAC test, and SELinux User Map to use the same
label (i.e. Status) and values (i.e. Enabled/Disabled). The method
to change the status will be modified separately.
Ticket #2247
host-add command allows to add a host and its IP address via
--ip-address option. When the address is invalid, it throws
an error and refuses to operate. However, the invalid IP address
error message is always the same which is not right as it forces
a user to guess the reason of rejection (loopback address,
link-local address or invalid address at all was passed, etc.).
This patch changes host-add validator to print the error message.
https://fedorahosted.org/freeipa/ticket/2229
Having float type as a base type for floating point parameters in
ipalib introduces several issues, e.g. problem with representation
or value comparison. Python language provides a Decimal type which
help overcome these issues.
This patch replaces a float type and Float parameter with a
decimal.Decimal type in Decimal parameter. A precision attribute
was added to Decimal parameter that can be used to limit a number
of decimal places in parameter representation. This approach fixes
a problem with API.txt validation where comparison of float values
may fail on different architectures due to float representation error.
In order to safely transfer the parameter value over RPC it is
being converted to string which is then converted back to
decimal.Decimal number on a server side.
https://fedorahosted.org/freeipa/ticket/2260
This is what we already do in the HBAC plugin, this ports it to Sudo.
If a category (user, host, etc) is u'all' then we don't allow individual
members be added. Conversely if there are members we don't allow the
category be set to u'all'.
https://fedorahosted.org/freeipa/ticket/1440
pkey-only functionality has to be implemented separately for these
modules as they are based on crud.Search instead of standard
LDAPSearch.
Delegation moduled was also fixed to support new format of ACI's
memberof attribute introduced in patch "Display the value of
memberOf ACIs in permission plugin."
https://fedorahosted.org/freeipa/ticket/2092
The certificate request dialog box has been modified to show
the OpenSSL commands for generating a CSR.
The realm and entry names in the test data have been fixed to
be more consistent.
Ticket #1012
When multiple HBAC rules are defined, IPA default limits to retrieve
objects may limit the scope of HBAC testing. To allow full range of rules
to be tested support for --sizelimit option is added.
In addition, when --rules option is specified, make sure only those rules
are retrieved regardless total number of rules defined. This should also
speed up HBAC test performance for real life scenarios when few new rules
are added to large collection of rules.
https://fedorahosted.org/freeipa/ticket/2230
FreeIPA SUDO rules use --usercat/--groupcat to specify that rule
applies to all users or groups. Thus, sudorule-add-runasuser and
sudorule-add-runasgroup accept specific groups and users and do not
accept ALL reserved word.
The patch validates user and group passed to these commands and
reports appropriate errors when these are ALL.
Ticket #1496https://fedorahosted.org/freeipa/ticket/1496
Having a Parameter maxvalue larger that 2G makes Python convert it
to "long" type instead of "int" type. Our framework than fails to
bootstrap the API when it detects long integer in Parameter
maxvalue.
Remove the clashing maxvalue out entirely as we can't transfer
values larger than 2G anyway (xmlrpc limitation).
https://fedorahosted.org/freeipa/ticket/2082
Use new structured DNSRecord parameters to generate per-type API
for all supported DNS RR types. This should help significantly
the end-user with manipulating complex DNS record type (MX, LOC,
etc.).
All enhancements are integrated to current DNS record commands:
1) dnsrecord-add
- Records can be either entered as a raw value (e.g. --mx-rec=
"1 srv1.example.com" for MX record) or per-part:
--mx-preference=1 --mx-exchanger=srv1.example.com
- CLI interactive help behavior was changed. It will ask for
a record type and then ask for all DNS record part values
(e.g. MX Preference value, MX Exchanger value).
2) dnsrecord-mod
- This command can now operate in 2 modes. When only a raw DNS
record is entered (e.g. --mx-rec="1 srv1.example.com") it
operates in standard mode and replaces any previous mxrecord
value with the --mx-rec value.
When any structured parameter (e.g. --mx-preference) is passed
it modifies just the specified parts of one mxrecord value
referred by --mx-rec:
--mx-rec="1 srv1.example.com" --mx-preference=2
- New interactive help has been implemented. It will ask for a
record to be modified (in the same manner as dnsrecord-del)
and then let user change DNS record part(s) for chosen
records.
3) All dnsrecord-* commands have now --structured option
- When this option is passed, instead of displaying raw DNS values
all DNS records are parsed and displayed per-part. Example:
$ ipa dnsrecord-show example.com @ --structured
Record name: @
Records:
Record type: MX
Record data: 0 server1.example.com.
MX Preference: 0
MX Exchanger: server1.example.com.
Record type: NS
Record data: ns1.example.com.
NS Hostname: ns1.example.com.
All API changes are compatible with clients without this patch.
https://fedorahosted.org/freeipa/ticket/2082
Complex commands may have many options or non-standard output. This
patch adds 2 improvements to handle these commands better:
1) Add "option_group" parameter attribute
Make command help more readable by specifying an option group
for the parameter. All parameters in the same option group are
then placed to one named option group
2) Allow nested entries in the output
Current CLI output module cannot handle a list of nested entries
(dictionaries) contained in an entry attribute. Make sure they
are printed properly (with indentation)
https://fedorahosted.org/freeipa/ticket/2082
CSV values were not parsed in ipalib.parameters.normalize method
properly when passed as a list and not as a basestring.
Based on Jan Cholasta's contribution.
Current DNS record processing architecture has many flaws,
including custom execute() methods which does not take advantage
of base LDAP commands or nonstandard and confusing DNS record
option processing.
This patch refactors DNS record processing with the following
improvements:
* Every DNS record has now own Parameter type. Each DNS record
consists from one or more "parts" which are also Parameters.
This architecture will enable much easier implementation of
future per-DNS-type API.
* Validation is now not written as a separate function for
every parameter but is delegated to DNS record parts.
* Normalization is also delegated to DNS record parts.
* Since standard LDAP base commands execute method is now used,
dnsrecord-add and dnsrecord-mod correctly supports --setattr
and --addattr options.
* In order to prevent confusion unsupported DNS record types
are now hidden. They are still present in the plugin so that
old clients receive proper validation error.
The patch also contains several fixes:
* Fix domain-name validation and normalization- allow domain
names that are not fully qualified. For example --cname-rec=bar
is a valid domain-name for bind which will translate it then
as bar.<owning-domain>. This change implies, that fully qualified
domain names must end with '.'.
* Do not let user accidentally remove entire zone with command
"ipa dnsrecord-del @ --del-all".
* Fix --ttl and --class option processing in dnsrecord-add and
dnsrecord-mod.
All API changes are compatible with clients without this patch.
https://fedorahosted.org/freeipa/ticket/2082
The user details page has been modified to show the password policy
and Kerberos ticket policy that apply to the user. The policies are
currently displayed as read-only.
Ticket #703
New version of SSSD begins ignoring sourcehost value of HBAC rules by
default. In order to match this behaviour the sourcehost option in
hbactest is optional now, but the value of sourcehost is ignored in all
rules. Every rule's sourcehost value is set to 'ALL' what turns sourchost
value comparation off. If srchost option is used, warning is displayed to
inform the user about changes. Text of plugin help was also updated.
Also the unit tests for hbactest plugin were updated. Every test was
doubled. The second ones test the plugin without sourcehost option. They
are supposed to have the same result.
https://fedorahosted.org/freeipa/ticket/2085
There were two problems:
1. memberof wasn't in the list of things we looked for in the return value
from aci_show()
2. The value wasn't being translated into a group name.
Use the DN class to retrieve the group name from the memberof URI.
Note that I changed the parsing for targetgroup as well. We now save a lookup
and potentially returning a NotFound if an aci points to a group that no
longer exists.
https://fedorahosted.org/freeipa/ticket/2100
Add new class "cachedproperty" for creating property-like attributes
that cache the return value of a method call.
Also fix few issues in the unit tests to enable them to succeed.
ticket 1959
The JSON server has been modified to return the version number
in all responses. The UI has been modified to keep the version
obtained during env operation and check the version returned
in subsequent operations. If the version changes the UI will
reload itself.
Ticket #946
This is to prevent a Cross-Site Request Forgery (CSRF) attack where
a rogue server tricks a user who was logged into the FreeIPA
management interface into visiting a specially-crafted URL where
the attacker could perform FreeIPA oonfiguration changes with the
privileges of the logged-in user.
https://bugzilla.redhat.com/show_bug.cgi?id=747710
I've used code from ipalib/plugins/host.py to add support for random
password generation. The '--random' option is now available in user-add
and user-mod commands. If both the 'password' and 'random' options are
used the 'random' option will be ignored.
Two test cases were added to unit test's module test_user_plugin.py -
they test creating and modifying user with random password. Two fuzzy tests
were added: test for password(string that doesn't start or end with
whitespace and doesn't containt other whitespace than ' ') and for whatever
string(because of krbextradata).
I've slightly modified ipa_generate_password in order to make passwords for
users more user-friendly(reduce number of non-letters). It has two optional
parameters now - first one is string of characters that should be used for
generating the passwd and second one is length of password. If none
parameter is set default values will be used so there's no need to modify
other plugins that use random password generator.
https://fedorahosted.org/freeipa/ticket/1979
This will allow one to define what SELinux context a given user gets
on a given machine. A rule can contain a set of users and hosts or it
can point to an existing HBAC rule that defines them.
https://fedorahosted.org/freeipa/ticket/755
The json_metadata command has been modified to accept some new
options and return the commands metadata. The API.txt has been
updated as well. The UI has been modified to use commands metadata
instead of methods metadata.
Ticket #388
This makes no changes to the functionality in the command-line or
GUI because these all have defaults anyway. This is mostly to show
them properly in the UI and prevent someone from trying to erase the
value (and getting a nasty schema error in response).
https://fedorahosted.org/freeipa/ticket/2015
'ipa pwpolicy-find' output is now sorted by priority of the policies.
Lower position means lower priority. Global policy is then at the bottom.
The changes has also affected LDAPSearch class in baseldap.py:
LDAPSearch class sorts the search results by primary key be default
(which is usually 'cn'). Therefor a function pointer entries_sortfn
was added. If no sorting function exists, default sorting by primary key
is used.
Sorting function had to be introduced due to the fact that pwpolicy's
primary key is also it's 'cn' and global policy is not allowed to have any
priority.
https://fedorahosted.org/freeipa/ticket/2045
The default log level for server messages captured by httpd's
error_log historically was INFO. The log_manager patch had it set to
ERROR, this patch resets it back to INFO.
Although it would have been trival to set the default_level to INFO in
IPALogManager.configure_from_env() that is not logically the correct
place. It would be much better if the default_level can be reset by
simply assigning it to the log_mgr. To accomplish that
LogManager.default_level was converted to a property with a getter and
setter. The setter runs LogManager.apply_configuratin() after the
default_level is modified. LogManager.set_default_level() was also
added to allow simultaneously updating the configure_state.
While testing some minor problems were observed and also fixed:
* Removed some print statement which had been left in by mistake
* Removed the ability to set the handler level in the config file
because of chicken-and-egg issues of when handlers get created.
The Env config file format is too inflexible to support detailed
logging configuration. If the Env config format is ever made more
flexible we can come back and add this back in. The handler config
setting in Env had never been used and never worked so there is no
issue in removing it.
Remove "List" parameter type and replace all occurences of it with appropriate
multi-valued parameter ("Str" in most cases) with csv enabled.
Add new parameter type "Any", capable of holding values of any type. This is
needed by the "batch" command, as "Str" is not suitable type for the "methods"
parameter.
ticket 2007
The validator has been improved to support better both SOA format
(e-mail address in a domain name format, without '@') and standard
e-mail format. Allow '\.' character in a SOA format encoding the
standard '.' in the local-part of an e-mail. Normalization code
has been moved to one common function.
https://fedorahosted.org/freeipa/ticket/2053
Add a --delattr option to round out multi-valued attribute
manipulation. The new option is available for all LDAPUpdate based
commands. --delattr is evaluated last, it can remove any value
present either in --addattr/--setattr option or in current LDAP
object.
--*attr processing was completely refactored and placed to one
independent function available for all baseldap commands. For this
purpose a missing common base class for all baseldap commands has
been implemented. The new class should serve not only for --*attr
processing but also for other common baseldap methods and
attributes.
This approach will also benefit other custom commands based neither
on LDAPCreate nor LDAPUpdate. They can easily integrate --*attr
option processing when needed.
https://fedorahosted.org/freeipa/ticket/1929
There are two reasons for the plugin framework:
1. To provide a way of doing manual/complex LDAP changes without having
to keep extending ldapupdate.py (like we did with managed entries).
2. Allows for better control of restarts.
There are two types of plugins, preop and postop. A preop plugin runs
before any file-based updates are loaded. A postop plugin runs after
all file-based updates are applied.
A preop plugin may update LDAP directly or craft update entries to be
applied with the file-based updates.
Either a preop or postop plugin may attempt to restart the dirsrv instance.
The instance is only restartable if ipa-ldap-updater is being executed
as root. A warning is printed if a restart is requested for a non-root
user.
Plugins are not executed by default. This is so we can use ldapupdate
to apply simple updates in commands like ipa-nis-manage.
https://fedorahosted.org/freeipa/ticket/1789https://fedorahosted.org/freeipa/ticket/1790https://fedorahosted.org/freeipa/ticket/2032
change default_logger_level to debug in configure_standard_logging
add new ipa_log_manager module, move log_mgr there, also export
root_logger from log_mgr.
change all log_manager imports to ipa_log_manager and change
log_manager.root_logger to root_logger.
add missing import for parse_log_level()
This patch changes the way plugins are initialized. Instead of
finalizing all the plugins at once, plugins are finalized only after
they are accessed (currently applies to Command, Object and
Attribute subclasses, only in CLI by default).
This change provides significant performance boost, as only the
plugins that are actually used are finalized.
ticket 1336
Make sure that PublicError does not crash when it receives
Gettext/NGettext object. Instead of throwing a type error, do the
translation to receive the required unicode text.
https://fedorahosted.org/freeipa/ticket/2096
Parameters in LDAP objects missed an information if they are real
LDAP attributes or not. Real LDAP attributes are written to
entry_attrs dictionary in plugin callbacks and are being encoded.
This causes issues when plugin callbacks does not expect that
the parameters values are already encoded for submission to LDAP.
This patch introduces a new flag "noattribute" used to mark that
a parameter is not an LDAP attribute and thus should not be encoded
or added to entry_attrs. Param documentation is improved to describe
the meaning of this and other Param flags or attributes.
https://fedorahosted.org/freeipa/ticket/2097
Remove config-mod options help from config module help to keep the
option doc on one place and without unnecessary redundancy. The new
format is more consistent with the rest of the plugins. Also fix
several inconsistencies in the labels/doc, including:
- using abbreviation when not needed
- using '.' at the end of options help
https://fedorahosted.org/freeipa/ticket/1906
Implement missing validators for DNS RR types so that we can capture
at least basic user errors. Additionally, a normalizer creating
a fully-qualified domain name has been implemented for several RRs
where name server may mis-interpret the domain name otherwise.
Unit tests exercising these new validators for the most common
RR types have been added. This patch also consolidates hard-coded
values in DNS test to one place.
https://fedorahosted.org/freeipa/ticket/1106
The 'Keytab' field in output of all 'user-*' commands was changed
to 'Kerberos keys available'. In order to do this change for 'user-*'
commands only, the flag 'has_keytab' had to be removed from common
output parametrs in ipalib/baseldap.py. This change also affected the
host.py and service.py, where the 'has_keytab' flag was added to their
local output params. Both host.py and service.py holds the old field
caption - 'Keytab' - because of compatibility with older clients.
https://fedorahosted.org/freeipa/ticket/1961
--allow-dynupdate was implemented as a Flag parameter type, which
is not convenient for LDAP attributes. When a DNS zone with
permitted dynamic updates was modified and the --allow-dynupdate
flag was not set, dynamic updates were turned off.
This patch changes the option type to Bool parameter type which
behaves according to user expectations when modifying the zone.
https://fedorahosted.org/freeipa/ticket/2039
Server framework does not support encoding of native Python type
values stored in Param classes and sub-classes. When backend (LDAP)
value encoding differs from Python type value representation user
has to has to hard-code the encoders in his processing.
This patch introduces a method Param.encode which is used in server
context to encode native Python Param values. The new encode method
is used for Bool parameter to convert native Python bool type value
(True, False) to LDAP value ("TRUE", "FALSE").
https://fedorahosted.org/freeipa/ticket/2039
The reset password dialog for user has been modified to provide
a field to specify the current password when changing the user's
own password.
Ticket #2065
New option --pkey-only is available for all LDAPSearch based classes
with primary key visible in the output. This option makes LDAPSearch
commands search for primary attribute only.
This may be useful when manipulating large data sets. User can at
first retrieve all primary keys in a relatively small data package
and then run further commands with retrieved primary keys.
https://fedorahosted.org/freeipa/ticket/1262
Labels using the word "enroll" (except for host enrollment) have
been modified to use more relevant words.
The IPA.add_dialog has been renamed into IPA.entity_adder_dialog
for clarity.
Ticket #1642
Do at least a basic validation of DNS zone manager mail address.
Do not require '@' to be in the mail address as the SOA record
stores this value without it and people may be used to configure
it that way. '@' is always removed by the installer/dns plugin before
the DNS zone is created.
https://fedorahosted.org/freeipa/ticket/1966
The dialogs and details pages have been modified to use the * symbol
to mark required fields. The automount map and the DNS zone dialogs
have been modified to update the required fields according to the
input type.
Ticket #1696, #1973
Fixes 3 issues:
- If a topic has all its commands disabled, it should be disabled
- If a command is disabled its help should be disabled
- The show-mappings help was missing a doc string so no help was displayed
https://fedorahosted.org/freeipa/ticket/1998
When the NGP plugin is enabled, a managed netgroup is created for
every hostgroup. We already check that netgroup with the same
name does not exist and provide a meaningful error message.
However, this error message was also printed when a duplicate
hostgroup existed.
This patch checks for duplicate hostgroup existence first and
netgroup on the second place. It also makes sure that when NGP
plugin is (temporarily) disabled, a colliding netgroup cannot
be created.
https://fedorahosted.org/freeipa/ticket/1914
Since IPA v2 server already contain predefined groups that may collide
with groups in migrated (IPA v1) server (for example admins, ipausers),
users having colliding group as their primary group may happen to belong
to an unknown group on new IPA v2 server.
Implement --group-overwrite-gid option to overwrite GID of already
existing groups to prevent this issue.
https://fedorahosted.org/freeipa/ticket/1866
When users and hosts are included into groups indirectly, make sure that
during HBAC test e fill in all indirect groups properly into an HBAC request.
Also, if hosts provided for test are not specified fully, canonicalize them
using IPA domain.
This makes possible following requests:
ipa hbactest --user foobar --srchost vm-101 --host vm-101 --service sshd
Request to evaluate:
<user <name foobar groups [hbacusers,ipausers]>
service <name sshd groups []>
targethost <name vm-101.ipa.local groups []>
srchost <name vm-101.ipa.local groups []>
>
Fixes:
https://fedorahosted.org/freeipa/ticket/1862https://fedorahosted.org/freeipa/ticket/1949
When user/group default object class is being modified via
ipa config-mod, no validation check is run. Check at least
the following:
- all object classes are known to LDAP
- all default user/group attributes are allowed under the new
set of default object classes
https://fedorahosted.org/freeipa/ticket/1893
The JSON metadata call has grown large enough that parsing it requires too much stack space on some browsers. TO avoid breaking the API, this change reuses some testing parameters that we established for the metadata call in the past. To fetch just the objects call it like this:
{"method":"json_metadata","params":[["all",""],{}],"id":0}
And just the methods call it like this:
{"method":"json_metadata","params":[["","all"],{}],"id":0}
Note the difference in the positional parameters.
To get a specific object, pass the object name as the first parameter. To get a specific method, pass a blank first parameter and the method name in the second parameter.
THis is not ideal, but we are constrained by the existing API.
For every hostgroup a managed netgroup is created (if this is allowed).
Make sure that if a stand-alone netgroup exists, a hostgroup with the
same name cannot be created to prevent collisions.
https://fedorahosted.org/freeipa/ticket/1914
Add a new required parameter, current_password. In order to ask this
first I added a new parameter option, sortorder. The lower the value the
earlier it will be prompted for.
I also changed the way autofill works. It will attempt to get the default
and if it doesn't get anything will continue prompting interactively.
Since current_password is required I'm passing a magic value that
means changing someone else's password. We need to pass something
since current_password is required.
The python-ldap passwd command doesn't seem to use the old password at
all so I do a simple bind to validate it.
https://fedorahosted.org/freeipa/ticket/1808
When group/user is migrated, the attribute used for RDN may be
multivalued. Make sure that we pick the value used in the RDN
which should be the unique one and not just the first one.
https://fedorahosted.org/freeipa/ticket/1892
LDAPCreate reports "search criteria was not specific enough" when LDAP
object created in LDAPCreate shares its container with other LDAP objects
and there is one with the same name and RDN attribute.
Pass objectclass to find_entry_by_attr() function used to retrieve
newly created object for POST_CALLBACK to identify correct LDAP
object.
https://fedorahosted.org/freeipa/ticket/1864
Fix get_url_list() so that the configured master server is there
just once. This fix lets /usr/bin/ipa try connecting to all IPA
masters just once and not print confusing server list with
dupled master.
https://fedorahosted.org/freeipa/ticket/1817
The validator will still fire, just after the load_files() call. Basically
it will hit the validator twice. The first time it will exit because the
value of csr is a filename. The second time it will run the validator against
the contents of the file.
ticket https://fedorahosted.org/freeipa/ticket/1777
https://fedorahosted.org/freeipa/ticket/1763
When external host is specified in HBAC rule, it needs to be added to
the set of source hosts this rule applies to. Add (list of external hosts)
explicitly when converting FreeIPA rules to PyHBAC objects.
Some hard-coded messages in ipa.js have been moved into internal.py.
The messages in internal.py have been rearranged to match the output
(ipa_init.json).
A new method IPA.get_message() has been added to take a message ID and
return the translated message or a default message if not found.
Ticket #1701
Integrate new bind-dyndb-ldap features to automatically track
DNS data changes:
1) Zone refresh
Set --zone-refresh in installation to define number of seconds
between bind-dyndb-ldap polls for new DNS zones. User now
doesn't have to restart name server when a new zone is added.
2) New zone notifications
Use LDAP persistent search mechanism to immediately get
notification when any new DNS zone is added. Use --zone-notif
install option to enable. This option is mutually exclusive
with Zone refresh.
To enable this functionality in existing IPA installations,
update a list of arguments for bind-dyndb-ldap in /etc/named.conf.
An example when zone refresh is disabled and DNS data change
notifications (argument psearch of bind-dyndb-ldap) are enabled:
dynamic-db "ipa" {
...
arg "zone_refresh 0";
arg "psearch yes";
};
This patch requires bind-dyndb-ldap-1.0.0-0.1.b1 or later.
https://fedorahosted.org/freeipa/ticket/826
Added new container in etc to hold the automembership configs.
Modified constants to point to the new container
Modified dsinstance to create the container
Created automember.py to add the new commands
Added xmlrpc test to verify functionality
Added minor fix to user.py for constant behavior between memberof
and automember
https://fedorahosted.org/freeipa/ticket/1272
1) Add sudorule docstring headline
2) Fix naming inconsistency in Sudo plugins help and summaries,
especially capitalization of Sudo objects - Sudo Rule, Sudo
Command and Sudo Command Group
3) Add missing summaries for sudorule-add-option and
sudorule-remove-option. To keep backward compatibility with
older clients, just print the missing summary with
output_for_cli(), don't expand Output.
https://fedorahosted.org/freeipa/ticket/1595https://fedorahosted.org/freeipa/ticket/1596
When adding/removing source hosts if the host isn't found in IPA it is
considered external. The attribute externalhost is used to store
external hosts.
ticket https://fedorahosted.org/freeipa/ticket/1574
Dogtag is going to be proxied through httpd. To make this work, it has to support renegotiation of the SSL
connection. This patch enables renegotiate in the nss configuration file during during apache configuration,
as well as modifies libnss to set the appropriate optins on the ssl connection in order to renegotiate.
The IPA install uses the internal ports instead of proxying through
httpd since httpd is not set up yet.
IPA needs to Request the certificate through a port that uses authentication. On the Dogtag side, they provide an additional mapping for this: /ca/eeca/ca as opposed tp /ca/ee/ca just for this purpose.
https://fedorahosted.org/freeipa/ticket/1334
add flag to pkicreate in order to enable using proxy.
add the proxy file in /etc/http/conf.d/
Signed-off-by: Simo Sorce <ssorce@redhat.com>
This patch reverts the use of pygettext for i18n string extraction. It
was originally introduced because the help documentation for commands
are in the class docstring and module docstring.
Docstrings are a Python construct whereby any string which immediately
follows a class declaration, function/method declaration or appears
first in a module is taken to be the documentation for that
object. Python automatically assigns that string to the __doc__
variable associated with the object. Explicitly assigning to the
__doc__ variable is equivalent and permitted.
We mark strings in the source for i18n translation by embedding them
in _() or ngettext(). Specialized extraction tools (e.g. xgettext)
scan the source code looking for strings with those markers and
extracts the string for inclusion in a translation catalog.
It was mistakingly assumed one could not mark for translation Python
docstrings. Since some docstrings are vital for our command help
system some method had to be devised to extract docstrings for the
translation catalog. pygettext has the ability to locate and extract
docstrings and it was introduced to acquire the documentation for our
commands located in module and class docstrings.
However pygettext was too large a hammer for this task, it lacked any
fined grained ability to extract only the docstrings we were
interested in. In practice it extracted EVERY docstring in each file
it was presented with. This caused a large number strings to be
extracted for translation which had no reason to be translated, the
string might have been internal code documentation never meant to be
seen by users. Often the superfluous docstrings were long, complex and
likely difficult to translate. This placed an unnecessary burden on
our volunteer translators.
Instead what is needed is some method to extract only those strings
intended for translation. We already have such a mechanism and it is
already widely used, namely wrapping strings intended for translation
in calls to _() or _negettext(), i.e. marking a string for i18n
translation. Thus the solution to the docstring translation problem is
to mark the docstrings exactly as we have been doing, it only requires
that instead of a bare Python docstring we instead assign the marked
string to the __doc__ variable. Using the hypothetical class foo as
an example.
class foo(Command):
'''
The foo command takes out the garbage.
'''
Would become:
class foo(Command):
__doc__ = _('The foo command takes out the garbage.')
But which docstrings need to be marked for translation? The makeapi
tool knows how to iterate over every command in our public API. It was
extended to validate every command's documentation and report if any
documentation is missing or not marked for translation. That
information was then used to identify each docstring in the code which
needed to be transformed.
In summary what this patch does is:
* Remove the use of pygettext (modification to install/po/Makefile.in)
* Replace every docstring with an explicit assignment to __doc__ where
the rhs of the assignment is an i18n marking function.
* Single line docstrings appearing in multi-line string literals
(e.g. ''' or """) were replaced with single line string literals
because the multi-line literals were introducing unnecessary
whitespace and newlines in the string extracted for translation. For
example:
'''
The foo command takes out the garbage.
'''
Would appear in the translation catalog as:
"\n
The foo command takes out the garbage.\n
"
The superfluous whitespace and newlines are confusing to translators
and requires us to strip leading and trailing whitespace from the
translation at run time.
* Import statements were moved from below the docstring to above
it. This was necessary because the i18n markers are imported
functions and must be available before the the doc is
parsed. Technically only the import of the i18n markers had to
appear before the doc but stylistically it's better to keep all the
imports together.
* It was observed during the docstring editing process that the
command documentation was inconsistent with respect to the use of
periods to terminate a sentence. Some doc had a trailing period,
others didn't. Consistency was enforced by adding a period to end of
every docstring if one was missing.
In cli.py is a framework for printing out help information. The
command documentation being displayed is internationalized, however
the text generated by the help framework itself is not
internationalized.
The strings output by the help subsystem need to be internationalized.
* Wrap each topic description in _()
* Replace the use of if 'topic' in dir(module) with the more
Pythonic and efficient getattr(module, 'topic', None)
* Make sure to invoke unicode on the value returned from _()
otherwise you'll get a GettextFactory instance, not a string
* Clean up trailing whitespace errors
A Password param always prompted to confirm the entered password.
This doesn't make sense if you want to prompt for a password to another
system like we do with entitlements. This adds a new boolean option to
control the Password prompt parameter.
https://fedorahosted.org/freeipa/ticket/1695
Newly performs validation of details facet before update. If validation fails, notification dialog is shown and command isn't executed.
Fixed integer minimum and maximum value checking.
Read-only and non-writable fields are no longer considered required.
We need an indicator to see if a keytab has been set on host and
service entries. We also need a way to know if a one-time password is
set on a host.
This adds an ACI that grants search on userPassword and
krbPrincipalKey so we can do an existence search on them. This way
we can tell if the attribute is set and create a fake attribute
accordingly.
When a userPassword is set on a host a keytab is generated against
that password so we always set has_keytab to False if a password
exists. This is fine because when keytab gets generated for the
host the password is removed (hence one-time).
This adds has_keytab/has_password to the user, host and service plugins.
ticket https://fedorahosted.org/freeipa/ticket/1538
The association table widget and facet have been modified to accept
titles for the add and delete dialogs. The table and facet definitions
have been modified to specify the appropriate titles.
Some unused code have been removed.
Ticket #1629
