Move strict "search_btn" element finding to later so we
do not fail when using combobox without search button.
Also switch open_btn.click() before fill_textbox() as it
is used to close the selection.
https://pagure.io/freeipa/issue/7441
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Add "confirm_btn" to cancel dialog and if "None" return
for confirmation with "Enter" key.
https://pagure.io/freeipa/issue/7441
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Run shell command on the UI system using "admin"
user's passwd from conf.
https://pagure.io/freeipa/issue/7441
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Add assert_notification() function to check whether
we have a notification of particular type/
https://pagure.io/freeipa/issue/7441
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Add add_host() support func into test_service to
create temp hosts.
https://pagure.io/freeipa/issue/7441
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
change get_http_pkey() function to more generic one in
order to get pkey for different services
https://pagure.io/freeipa/issue/7441
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Use temporary empty DIR-based ccache collection to prevent upgrade
failures in case KCM: or KEYRING: ccache type is used by default in
krb5.conf and is not available. We don't need any user credentials
during upgrade procedure but kadmin.local would attempt to resolve
default ccache and if that's not available, kadmin.local will fail.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1558818
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
pytest removed copy() method from its Namespace class. Use the copy
module to make a copy of early options.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
This commit adds configuration for HTTPD to encrypt/decrypt its
key which we currently store in clear on the disc.
A password-reading script is added for mod_ssl. This script is
extensible for the future use of directory server with the
expectation that key encryption/decription will be handled
similarly by its configuration.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-{server,kra}-install logs have been showing warnings about
deprecation of some Dogtag configuration options. Follow
the warnings' advice and rename these options to their newer
form.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
ipa user-find --whoami is used by ipa otptoken-add to populate
ipaTokenOwner and managedBy attributes. These attributes, in turn are
checked by the self-service ACI which allows to create OTP tokens
assigned to the creator.
With 389-ds-base 1.4.0.6-2.fc28 in Fedora 28 beta there is a bug in
searches with scope 'one' that result in ipa user-find --whoami
returning 0 results.
Because ipa user-find --whoami does not work, non-admin user cannot
create a token. This is a regression that can be fixed by using LDAP
Whoami command.
LDAP Whoami command returns a string 'dn: <DN of the bind>', so we have
to strip first four characters to get actual DN.
Fixes: https://pagure.io/freeipa/issue/7456
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
With e6c707b168 we changed httpd
configuration to use abstracted out variables in the template.
However, during upgrade we haven't resolved these variables so an
upgrade from pre-e6c707b168067ebb3705c21efc377acd29b23fff install will
fail.
Add all missing variables to the upgrade code.
Fixes https://pagure.io/freeipa/issue/7454
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
When non-admin user issues a command that utilizes
api.Object.config.show_servroles_attributes(), some server roles might
return errors.EmptyResult, indicating that a role is not visible to this
identity.
Most of the callers to api.Object.config.show_servroles_attributes() do
not process errors.EmptyResult so it goes up to an API caller. In case
of Web UI it breaks retrieval of the initial configuration due to ipa
config-show failing completely rather than avoiding to show available
server roles.
Fixes: https://pagure.io/freeipa/issue/7452
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
It is quite unclear how realm domains behave without reading source
code. New doc text describes its purpose and how it is managed.
https://pagure.io/freeipa/issue/7424
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
During ipa-replica-install, http installation first creates a service
principal for http/hostname (locally on the soon-to-be-replica), then
waits for this entry to be replicated on the master picked for the
install.
In a later step, the installer requests a certificate for HTTPd. The local
certmonger first tries the master defined in xmlrpc_uri (which is
pointing to the soon-to-be-replica), but fails because the service is not
up yet. Then certmonger tries to find a master by using the DNS and looking
for a ldap service. This step can pick a different master, where the
principal entry has not always be replicated yet.
As the certificate request adds the principal if it does not exist, we can
end by re-creating the principal and have a replication conflict.
The replication conflict later causes kerberos issues, preventing
from installing a new replica.
The proposed fix forces xmlrpc_uri to point to the same master as the one
picked for the installation, in order to make sure that the master already
contains the principal entry.
https://pagure.io/freeipa/issue/7041
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Second check in test is failing, because it accepts default installer's values of domain, which is already used for lab machines.
IPA DNS domain must not exist before the installation, fix is to provide domain name derived from vm name.
Reviewed-By: Alexey Slaykovsky <alexey@slaykovsky.com>
Configure the status request timeout, i.e. the connect/data timeout
on the HTTP request to get the status of Dogtag.
This configuration is needed in "multiple IP address" scenarios
where this server's hostname has multiple IP addresses but the HTTP
server is only listening on one of them. Without a timeout, if a
"wrong" IP address is tried first, it will take a long time to
timeout, exceeding the overall timeout hence the request will not be
re-tried. Setting a shorter timeout allows the request to be
re-tried.
Note that HSMs cause different behaviour so this value might not be
suitable for when we implement HSM support. It is known that a
value of 5s is too short in HSM environment.
This fix requires pki-core >= 10.6.0, which is already required by
the spec file.
Fixes: https://pagure.io/freeipa/issue/7425
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The AdminTool class purports to "call sys.exit() with the return
value" but most of the run implementations returned no value, or
the methods they called returned nothing so there was nothing to
return, so this was a no-op.
The fix is to capture and bubble up the return values which will
return 1 if any exceptions are caught.
This potentially affects other users in that when executing the
steps of an installer or uninstaller the highest return code
will be the exit value of that installer.
Don't use the Continuous class because it doesn't add any
value and makes catching the exceptions more difficult.
https://pagure.io/freeipa/issue/7330
Signed-off-by: Rob Crittenden rcritten@redhat.com
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Dogtag 10.6.0-0.2 contains SQL NSS DB fixes and full Python 3 support.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
DogtagInstance.backup_config uses shutil.copy to create a backup of the
config file. The function does not retain owner and group, so it creates a
backup as user and group root:root.
Closes: https://pagure.io/freeipa/issue/7426
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexey Slaykovsky <alexey@slaykovsky.com>
Teach pylint more about the internals of API to fix various issues with
pylint 1.8.3.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Now WebUI unit tests are generating results in qunit format which
is not consumable well by Jenkins.
This patch adds NPM dependency for adding generation results in
JUnit XML format so it can be easily processed.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
On Travis CI, the DNS update in test case test_create_host_with_ip may fail
with different error messages. Relax the error message check and just
check that the test case is hitting a DNS update failure.
This fixes a flaky test case on CI.
Closes: https://pagure.io/freeipa/issue/7447
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Some fast tests depend on an api.env with realm, domain, and host. On
machines without ~/.ipa/default.conf, the settings are not available.
Provide dummy values to make tests pass.
Closes: https://pagure.io/freeipa/issue/7432
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Aleksei Slaikovskii <aslaikov@redhat.com>
This moves the ETag disabling so that it's specific to the /ipa
virtual server rather than being applied to all virtual servers on the machine.
This enables better co-existence with other virtual servers that want ETags.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Installer now prints runtime of each step / part to install log.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The configure script now looks for Python 3.6 or newer, then falls back
to Python 2. All Makefile default to Python 3 if Python 3 is available.
See: pagure.io/freeipa/issue/7131
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Move logic for installing just the Python packages out of the spec file
and into our root Makefile. It removes code duplication to simplify a
spec file that supports building without Python 2.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
While trying to add idrange with untrusted domain name error
message is misleading.
Changing the error message to:
invalid 'ID Range setup':Specified trusted domain
name could not be found.
Resolves: https://pagure.io/freeipa/issue/5078
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
After commit bbe615e12c278f9cddaeb38e80b970bf14d9b32d, if the uninstall
process fails (in the test cleanup) the error is not hidden anymore.
That brought light to errors in the cleanup process on
TestReplicaInstall test, like this:
```
RUN ['ipa-server-install', '--uninstall', '-U']
ipapython.admintool: ERROR Server removal aborted:
Replication topology in suffix 'domain' is disconnected:
Topology does not allow server master.ipa.test to replicate with servers:
replica0.ipa.test.
ipapython.admintool: ERROR The ipa-server-install command failed
```
This commit changes the order of how a replica should be removed from
the topology.
Reviewed-By: Petr Vobornik <pvoborni@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
While testing on RHEL we are getting IOError instead of OSError.
Add also IOError to except clause.
This is mostly for compatibility reasons however should not cause
any issue as IOError is alias for OSError on Python3.
https://pagure.io/freeipa/issue/7439
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
When ipa-restore is called, it needs to delete the file
nss.conf, otherwise httpd server will try to initialize
the NSS engine and access NSSCertificateDatabase.
This is a regression introduced with the switch from NSS
to SSL.
https://pagure.io/freeipa/issue/7440
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
