pytest.config is created dynamically.
See: https://pagure.io/freeipa/issue/7758
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Pylint warns about comparing callable. Replace equality with identity
test.
See: https://pagure.io/freeipa/issue/7758
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Ignore new consider-using-enumerate warning for now and clean up code
later.
See: https://pagure.io/freeipa/issue/7758
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Pylint warns about inconsistent return statements when some paths of a
function return None implicitly. Make all implicit returns either
explicit or raise a proper exception.
See: https://pagure.io/freeipa/issue/7758
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Teach pylint that env instance has lite_* members
See: https://pagure.io/freeipa/issue/7758
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
pycodestyle both complains about "W504 line break after binary operator"
and "W503 line break before binary operator" when all warnings are
enabled. FreeIPA already ignores W504 in travis config. Let's ignore it
in fastcheck, too.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test test_http_intermediate_ca was expecting success when
it should expect a failure. Scenario:
- install IPA ca-less with certs signed by rootCA
- call ipa-server-certinstall with a cert signed by a subCA
to replace http cert.
In this case, the command should refust changing the cert
(otherwise the clients won't be able any more to use
ipa * commands as the subca is not installed in /etc/ipa/nssdb
or in /etc/ipa/ca.crt).
The commit fixes the test expectation and marks the test as
xfail (see ticket 7759).
The test test_ds_intermediate_ca was expecting success when
it should expect a failure. Same scenario as above, but for
the ldap server cert.
The commit fixes the test expectation and removes the xfail
(ticket 6959 was closed as invalid).
Note:
The behavior differs for ldap and http cert because LDAP server
is using a NSSDB and http server is using openssl, hence
ipa-server-certinstall follows 2 different code paths when
changing the server cert.
Related to https://pagure.io/freeipa/issue/7759
Related to https://pagure.io/freeipa/issue/6959
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Two tests were missing from nightly definition:
- test_caless.py::TestReplicaCALessToCAFull
- test_caless.py::TestServerCALessToExternalCA
Related to https://pagure.io/freeipa/issue/7743
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Add a new integration test for the following scenario:
- create a user with the "User Administrator" role
- as this user, create a user with a --radius=<radius_proxy_server>
This scenario was previously failing because ipa user-add --radius
requires read access to the radius server entries, and there was no
permission granting this access.
Related to https://pagure.io/freeipa/issue/7570
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
A non-admin user which has the "User Administrator" role cannot
add a user with ipa user-add --radius=<proxy> because the
call needs to read the radius proxy server entries.
The fix adds a System permission for reading radius proxy server
entries (all attributes except the ipatokenradiussecret). This
permission is added to the already existing privileges "User
Administrators" and "Stage User Administrators", so that the role
"User Administrator" can call ipa [stage]user-add|mod --radius=<proxy>
Fixes: https://pagure.io/freeipa/issue/7570
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Add a xmlrpc test for ipa user-add/user-mod --radius-username
The command were previously failing because the objectclass
ipatokenradiusproxyuser was not automatically added when the
attribute ipatokenRadiusUserName was added to the entry.
The test ensures that the command is now succeeding.
Related to https://pagure.io/freeipa/issue/7569
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The command "ipa user-add --radius-username" fails with
ipa: ERROR: attribute "ipatokenRadiusUserName" not allowed
because it does not add the objectclass ipatokenradiusproxyuser
that is required by the attribute ipatokenradiususername.
The issue happens with ipa user-add / stageuser-add / user-mod / stageuser-mod.
The fix adds the objectclass when needed in the pre_common_callback method
of baseuser_add and baseuser_mod (ensuring that user and stageuser commands
are fixed).
Fixes https://pagure.io/freeipa/issue/7569
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
DS now comes with certain SSL capabilities turned on after
installation. Previously, we did not expect this and were
blindly forcing everything on without checking, whether it
needs turning on. This would result in failures if the
config entries are already set the way we want. Relax this
configuration.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
DS now comes with nsslapd-security turned on and its own CA
cert in its NSS database. We're re-setting the NSS database
and setting our own CA cert to it, the DS pin file therefore
needs to be updated with the new password after this reset.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
During uninstallation, we're using serverid which we get from
sysrestore.state. This was not set in the newer install,
return it back.
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The test TestServerInstall::test_ca_2_certs has a
wrong expectation. Scenario:
install a CA-less master with
ipa-server-install --ca-cert-file root.pem
where root.pem contains the CA that signed the http and ldap
certificates + an additional (unneeded) CA cert.
The test was expecting a failure, but this scenario is not
problematic as long as the unneeded CA cert is not added.
Related to https://pagure.io/freeipa/issue/6289 which has been
closed as won't fix
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Only a single cert in DER or PEM format would be loaded from the
provided file. Extend this to include PKCS#7 format and load all
certificates found in the file.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7579
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Some basic tests like re-loading a certificate, loading a
PKCS#7 cert and bad cert handling.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7579
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Installation or IPA CA renewal with externally-signed CA accepts an
IPA CA certificate with empty Subject Key Identifier. This is
technically legal in X.509, but is an operational issue.
Furthermore, due to an extant bug in Dogtag
(https://pagure.io/dogtagpki/issue/3079) it will cause Dogtag
startup failure.
Reject CA certificates with empty Subject Key Identifier.
Fixes: https://pagure.io/freeipa/issue/7762
Reviewed-By: Christian Heimes <cheimes@redhat.com>
It is a standard SELinux user role included in RHEL (like
user_r, staff_r, guest_r) and used quite often.
Fixes: https://pagure.io/freeipa/issue/7658
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reuse master instance when installing replica with custom DS config.
This avoids one extra ipa-server-install and also tests replica
installation from a master with custom DS config.
See: https://pagure.io/freeipa/issue/7743
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Run test_customized_ds_config_install and test_dns_locations in nightly
runs.
See: https://pagure.io/freeipa/issue/7743
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
"messagebus" is an old, archaic name for dbus. Upstream dbus has started
to move away from the old name. Let's use the modern term in FreeIPA,
too.
Fixes: https://pagure.io/freeipa/issue/7754
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
0a5a7bdef7 introduced another problem. The
test is now failing on systems without a full IPA client or server
installation. Use IPA_CONFDIR env var to override location of
default.conf, so that the command always fails.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Serhii Tsymbaliuk <stsymbal@redhat.com>
Address a bug in the code block for attributeLevelRights for old clients.
The backward compatibility code for deprecated options was not triggered,
because the new name was checked against wrong dict.
Coverity Scan issue 323649, Copy-paste error
The copied code will not have its intended effect.
In postprocess_result: A copied piece of code is inconsistent with the
original (CWE-398)
See: Fixes: https://pagure.io/freeipa/issue/7753
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Fix Coverity finding CID 323644: logically dead code path
The code to determine whether NetBIOS name was already set or need to be
set after deriving it from a domain or asking a user for an interactive
input, was refactored at some point to avoid retrieving the whole LDAP
entry. Instead, it was provided with the actual NetBIOS name retrieved.
As result, a part of the code got neglected and was never executed.
Fix this code and provide a test that tries to test predefined,
interactively provided and automatically derived NetBIOS name depending
on how the installer is being run.
We mock up the actual execution so that no access to LDAP or Samba is
needed.
Fixes: https://pagure.io/freeipa/issue/7753
Reviewed-By: Christian Heimes <cheimes@redhat.com>
For smart card authentication, ipaapi must be able to access to sss-ifp.
During installation and upgrade, the ipaapi user is now added to
[ifp]allowed_uids.
The commit also fixes two related issues:
* The server upgrade code now enables ifp service in sssd.conf. The
existing code modified sssd.conf but never wrote the changes to disk.
* sssd_enable_service() no longer fails after it has detected an
unrecognized service.
Fixes: https://pagure.io/freeipa/issue/7751
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Test that
1) sudo is not enabled for members of admins group by default
2) sudo is enabled for them after execution of script provided
by ipa-advise enable_admins_sudo
Related to https://pagure.io/freeipa/issue/7538
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
If the server responds 401 and the response body is empty, the
client raises ResponseNotReady. This occurs because:
1. For a non-200 response, the response read only if the
Content-Length header occurs.
2. The response must be read before another request (e.g. the
follow-up request with WWW-Authenticate header set), and this
condition was not met. For details see
https://github.com/python/cpython/blob/v3.6.7/Lib/http/client.py#L1305-L1321.
This situation should not arise in regular use, because the client
either has a session cookie, or, knowing the details of the server
it is contacting, it establishes the GSS-API context and includes
the WWW-Authenticate header in the initial request.
Nevertheless, this problem has been observed in the wild. I do not
know its ordinary cause(s), but one can force the issue by removing
an authenticated user's session cache from /run/ipa/ccaches, then
performing a request.
Resolve the issue by always reading the response. It is safe to
call response.read() regardless of whether the Content-Length header
appears, or whether the body is empty.
Fixes: https://pagure.io/freeipa/issue/7752
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipaldap does not take into account the possibility of the attribute
encoding returned by python-ldap differing from the attribute
encoding produced by FreeIPA. In particular this can occur with DNs
with special characters that require escaping. For example,
python-ldap (or the underlying LDAP library) escapes special
characters using hex encoding:
CN=Test Sub-CA 201604041620,OU=ftweedal,O=Red Hat\2C Inc.,L=Brisbane,C=AU
Whereas FreeIPA, when encoding the DN, escapes the character
directly:
CN=Test Sub-CA 201604041620,OU=ftweedal,O=Red Hat\, Inc.,L=Brisbane,C=AU
Therefore it is possible to generate an invalid modlist. For
example, during external CA certificate renewal, if the issuer DN
includes a comma in one of the attribute values (as above), an
invalid modlist will be generated:
[ (ldap.MOD_ADD, 'ipacaissuerdn',
[b'CN=Test Sub-CA 201604041620,OU=ftweedal,O=Red Hat\, Inc.,L=Brisbane,C=AU'])
, (ldap.MOD_DELETE, 'ipacaissuerdn',
[b'CN=Test Sub-CA 201604041620,OU=ftweedal,O=Red Hat\2C Inc.,L=Brisbane,C=AU'])
]
Although encoded differently, these are the same value. If this
modification is applied to the object, attributeOrValueExists (error
20) occurs.
To avoid the issue, put deletes before adds in the modlist. If a
value is present (with different encodings) as both an addition and
a deletion, it must be because the original object contained the
value with a different encoding. Therefore it is safe to delete it,
then add it back.
Note that the modlist is not optimal. In the simplest case (like
above example), there should be no modification to perform. It is
considerably more complex (and more computation) to implement this
because the raw attribute values must be decoded before comparison.
Fixes: https://pagure.io/freeipa/issue/7750
Reviewed-By: Christian Heimes <cheimes@redhat.com>
In ipapwd_pre_mod, check userpw for NULL before dereferencing its first
element.
See: https://pagure.io/freeipa/issue/7738
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Fix potential NULL pointer deref in ipadb_mspac_get_trusted_domains().
In theory, dn could be empty and rdn NULL. The man page for ldap_str2dn()
does not guarantee that it returns a non-empty result.
See: https://pagure.io/freeipa/issue/7738
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Set keys to NULL after free rder to avoid potential double free.
See: https://pagure.io/freeipa/issue/7738
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Increase log level to info by setting verbose=True and adding
a console format.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7408
Reviewed-By: Christian Heimes <cheimes@redhat.com>
