After an upgrade, the group cn=adtrust agents may be missing some members.
Each ad trust controller must appear twice as member:
- krbprincipalname=cifs/hostname@realm,cn=services,cn=accounts,basedn
- fqdn=hostname,cn=computers,cn=accounts,basedn
Add an upgrade plugin that builds a list of hostnames from the cifs
principals and adds if needed fqdn=hostname...
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1778777
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
urllib3 now supports post-handshake authentication with TLS 1.3. Enable
TLS 1.3 support for Apache HTTPd.
The update depends on bug fixes for TLS 1.3 PHA support in urllib3 and
Apache HTTPd. New builds are available in freeipa-master COPR and in
F30/F31.
Overwrite crypto-policy on Fedora only. Fedora 31 and earlier have TLS
1.0 and 1.1 still enabled by default.
Fixes: https://pagure.io/freeipa/issue/8125
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
If a replica has no Samba bindings but there are trust agreements
configured on some trust controller, skip trust upgrade code on this
replica.
Resolves: https://pagure.io/freeipa/issue/8001
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
While [1] did open recursion, it also opened widely a security flaw.
This patch intends to close it back, while allowing operators to easily
add their open configuration within Bind9.
In order to allow operators to still open Bind recursion, a new file is
introduced, "ipa-ext.conf" (path might change according to the OS). This
file is not managed by the installer, meaning changes to it won't be
overridden.
Since it's included at the very end of the main configuration file, it
also allows to override some defaults - of course, operators have to be
careful with that.
Related-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1754530
Fixes: https://pagure.io/freeipa/issue/8079
[1] 5f4c75eb28
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Stanislav Levin <slev@altlinux.org>
LDAP updater now ignores commented out lines after substitution.
Fixes: https://pagure.io/freeipa/issue/8111
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add FIPS conditional to updates to prevent updater from adding camellia
encsalttypes.
Fixes: https://pagure.io/freeipa/issue/8111
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
New Pylint (2.4.3) catches several new 'true problems'. At the same
time, it warns about things that are massively and reasonably
employed in FreeIPA.
list of fixed:
- no-else-continue
- redeclared-assigned-name
- no-else-break
- unnecessary-comprehension
- using-constant-test (false positive)
list of ignored (responsibility of contributors and reviewers):
- import-outside-toplevel
Fixes: https://pagure.io/freeipa/issue/8102
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Python2 and python3 have different interfaces for os.mkdir:
python2: os.mkdir(path[, mode])
python3: os.mkdir(path, mode=0o777, *, dir_fd=None)
ipa-backup is using the python3 format, which breaks deployments using
python2. The fix consists in using os.mkdir(path, 0o700) instead of
os.mkdir(path, mode=0o700).
Fixes: https://pagure.io/freeipa/issue/8099
Reviewed-By: Alexander Bokovoy <abbra@users.noreply.github.com>
Add an upgrade script to detect when ipakra people entry has
incorrect 'description' attribute and fix it.
Part of: https://pagure.io/freeipa/issue/8084
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
If IPA CA has custom subject DN (not "CN=Certificate
Authority,{subject_base}"), the uid=ipakra people entry gets an
incorrect 'description' attribute. The issuer DN in the
'description' attribute is based on the aforementioned pattern,
instead of the actual IPA CA subject DN.
Update KRAInstance.configure_instance() to require the CA subject DN
argument. Update ipaserver.install.kra.install() to pass the CA
subject DN.
Fixes: https://pagure.io/freeipa/issue/8084
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This patche removes 93 pylint deprecation warnings due to invalid escape
sequences (mostly 'invalid escape sequence \d') on unicode strings.
Signed-off-by: Rafael Guterres Jeffman <rjeffman@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Dogtag had only one switch, ca.publish.enable, for both CRLs and certs.
Since cert publishing is not used in IPA it should be disabled to
avoid false positives in the logs.
https://pagure.io/freeipa/issue/7522
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Previously it would end up being owned by root:root mode 0755
instead of dirsrv:dirsrv mode 0770.
https://pagure.io/freeipa/issue/7725
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When the --server option is provided to ipa-replica-install (1-step
install), make sure that the server offers all the required roles
(CA, KRA). If it's not the case, refuse the installation.
Note that the --server option is ignored when promoting from client to
replica (2-step install with ipa-client-install and ipa-replica-install),
meaning that the existing behavior is not changed in this use case:
by default the host specified in default.conf as server is used for
enrollment, but if it does not provide a required role, another host can
be picked for CA or KRA setup.
Fixes: https://pagure.io/freeipa/issue/7566
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
ipa installer creates /etc/pkcs11/modules/softhsm2.module in order
to disable global p11-kit configuration for NSS.
This file was not included in the backups, and not restored.
The fix adds the file to the list of files to include in a backup.
Fixes: https://pagure.io/freeipa/issue/8073
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
It was executed after restore_all_files() so PKCS11_MODULES was
already restored so that part was a no-op, but the redhat
restore_pkcs11_modules() also calls unlink() on each restored
file so basically the file would be restored, unlinked, then
since it was already restored, skipped.
By moving the call to restore_pkcs11_modules() earlier it can
do the expected restoration properly.
https://pagure.io/freeipa/issue/8034
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Inside the container environment master's IP address
does not resolve to its name.
Resolves: https://pagure.io/freeipa/issue/6210
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
If trusted domain object (TDO) is lacking ipaAllowedToPerform;read_keys
attribute values, it cannot be used by SSSD to retrieve TDO keys and the
whole communication with Active Directory domain controllers will not be
possible.
This seems to affect trusts which were created before
ipaAllowedToPerform;read_keys permission granting was introduced
(FreeIPA 4.2). Add back the default setting for the permissions which
grants access to trust agents and trust admins.
Resolves: https://pagure.io/freeipa/issue/8067
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
It looks like for some cases we do not have proper set up keytab
retrieval configuration in the old trusted domain object. This mostly
affects two-way trust cases. In such cases, create default configuration
as ipasam would have created when trust was established.
Resolves: https://pagure.io/freeipa/issue/8067
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When parsing a keytab to copy keys to a different keytab, we don't need
the timestamp, so don't ask klist to output it. In some locales (en_IN,
for example), the timestamp is output in a single field without a space
between date and time. In other locales it can be represented with date
and time separated by a space.
Fixes: https://pagure.io/freeipa/issue/8066
Reviewed-By: Thomas Woerner <twoerner@redhat.com>
There is a loop which keeps trying to bind as the admin user
which will fail until it is replicated.
In the case where there is a lot to replicate the default
5 minute timeout may be insufficient. Provide a hint for
tuning.
Fixes: https://pagure.io/freeipa/issue/7971
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The variable is intended to control the timeout for replication
events. If someone had significantly reduced it via configuration
then it could have caused certmogner requests to fail due to timeouts.
Add replication_wait_timeout, certmonger_wait_timeout and
http_timeout to the default.conf man page.
Related: https://pagure.io/freeipa/issue/7971
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
This will let us call it from ipaplatform.
Mark the original location as deprecated.
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fixup for commit eb2313920e.
configparser's set() method does not convert boolean to string
automatically. Use string '"False"', which is then interpreted as
boolean 'False' by getboolean().
Related: https://pagure.io/freeipa/issue/5608
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The HSM state is stored in fstore, so that CA and KRA installer use the
correct token names for internal certificates. The default token is
"internal", meaning the keys are stored in a NSSDB as usual.
Related: https://pagure.io/freeipa/issue/5608
Co-authored-by: Magnus K Karlsson <magnus-ka.karlsson@polisen.se>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
The CA_BACKUP_KEYS_P12 file is not enabled when pki_backup_keys is
set to False. It's the case when FreeIPA is configured with HSM support.
Related: https://pagure.io/freeipa/issue/7677
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
When the DS certificate gets untracked then tracked again (via
dsinstance.start_tracking_certificate()), it loses its profile
configuration. Although it is the default profile, we want to
retain the explicit reference. Ensure we add the profile when
re-tracking the DS certificate.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When the HTTP certificate gets untracked then tracked again, it
loses its pin file. Ensure we add the pin file when (re-)tracking
the HTTP certificate.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Replace renewal CA and profile name literals with corresponding
symbols from ipalib.constants.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Profile-based renewal means we should always explicitly specify the
profile in tracking requests that use the dogtag-ipa-ca-renew-agent
renewal helper. This includes the IPA RA agent certificate. Update
CAInstance.configure_agent_renewal() to add the profile to the
tracking request. This also covers the upgrade scenario (because
the same method gets invoked).
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The search for the HTTP Certmonger tracking request uses an
incorrect parameter ('key-storage'), triggering removal and
recreation of tracking requests on every upgrade. Replace
'key-storage' with the correct parameter, 'key-file'.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For better diagnostics during upgrade, log the Certmonger tracking
requests that were not found (either because they do not exist, or
do not have the expected configuration).
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The upgrade routine checks tracking requests for CA system
certificates, IPA RA and HTTP/LDAP/KDC service certificates. If a
tracking request matching our expectations is not found, we stop
tracking all certificates, then create new tracking requests with
the correct configuration.
But the KRA was left out. Add checks for KRA certificates, and
remove/recreate KRA tracking requests when appropriate.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The profile for every Dogtag system cert tracking request is now
explicitly specified. So remove the code that handled unspecified
profiles.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The Dogtag "Server-Cert cert-pki-ca" certificate is treated
specially, with its own track_servercert() method and other special
casing. But there is no real need for this - the only (potential)
difference is the token name. Account for the token name difference
with a lookup method and treat all Dogtag system certs equally
w.r.t. tracking request creation and removal.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
To use profile-based renewal (rather than "renewal existing cert"
renewal which is brittle against database corruption or deleted
certificate / request objects), Certmonger tracking requests for
Dogtag system certs must record the profile to be used.
Update the upgrade method that checks tracking requests to look for
the profile. Tracking requests will be recreated if the expected
data are not found. The code that actually adds the tracking
requests was updated in a previous commit.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Enabling "fresh" renewals (c.f. "renewal"-based renewals that
reference the expired certificate and its associated request object)
will improve renewal robustness.
To use fresh renewals the tracking request must record the profile
to be used. Make dogtaginstance record the profile when creating
tracking requests for both CA and KRA.
Note that 'Server-Cert cert-pki-ca' and the 'IPA RA' both use
profile 'caServerCert', which is the default (according to
dogtag-ipa-renew-agent which is part of Certmonger). So we do not
need any special handling for those certificates.
This commit does not handle upgrade. It will be handled in a
subsequent commit.
Part of: https://pagure.io/freeipa/issue/7991
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
As we expand the integration tests for external CA functionality, it
is helpful (and avoids duplication) to use the MSCSTemplate*
classes. These currently live in ipaserver.install.cainstance, but
ipatests is no longer permitted to import from ipaserver (see commit
81714976e5e13131654c78eb734746a20237c933). So move these classes to
ipalib.
Part of: https://pagure.io/freeipa/issue/7548
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
With ipa 4.5+, the RA cert is stored in files in
/var/lib/ipa/ra-agent.{key|pem}. The upgrade code handles
the move from /etc/httpd/alias to the files but does not remove
the private key from /etc/httpd/alias.
The fix calls certutil -F -n ipaCert to remove cert and key,
instead of -D -n ipaCert which removes only the cert.
Fixes: https://pagure.io/freeipa/issue/7329
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
A previous refactoring of SELinux tests has have a wrong
assumption about the user field separator within
ipaSELinuxUserMapOrder. That was '$$', but should be just '$'.
Actually, '.ldif' and '.update' files are passed through
Python template string substitution:
> $$ is an escape; it is replaced with a single $.
> $identifier names a substitution placeholder matching
> a mapping key of "identifier"
This means that the text to be substituted on should not be escaped.
The wrong ipaSELinuxUserMapOrder previously set will be replaced on
upgrade.
Fixes: https://pagure.io/freeipa/issue/7996
Fixes: https://pagure.io/freeipa/issue/8005
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The only permitted ciphers are the AES family (called aes, which
is the combination of: aes256-cts-hmac-sha1-96,
aes128-cts-hmac-sha1-96, aes256-cts-hmac-sha384-192, and
aes128-cts-hmac-sha256-128).
DES, RC4, and Camellia are not permitted in FIPS mode. While 3DES
is permitted, the KDF used for it in krb5 is not, and Microsoft
doesn't implement 3DES anyway.
This is only applied on new installations because we don't
allow converting a non-FIPS install into a FIPS one.
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Drop the SSLProtocol directive for Fedora and RHEL systems. mod_ssl
will use crypto policies for the set of protocols.
For Debian systems configure a similar set of protocols for what
was previously configured, but do it in a different way. Rather than
iterating the allowed protocols just include the ones not allowed.
Fixes: https://pagure.io/freeipa/issue/7667
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
For now, FreeIPA supports SELinux things as they are in RedHat/Fedora.
But different distributions may have their own SELinux customizations.
This moves SELinux configuration out to platform constants:
- SELINUX_MCS_MAX
- SELINUX_MCS_REGEX
- SELINUX_MLS_MAX
- SELINUX_MLS_REGEX
- SELINUX_USER_REGEX
- SELINUX_USERMAP_DEFAULT
- SELINUX_USERMAP_ORDER
and applies corresponding changes to the test code.
Fixes: https://pagure.io/freeipa/issue/7996
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Introduces new utility to configure Samba on an IPA domain member.
The tool sets up Samba configuration and internal databases, creates
cifs/... Kerberos service and makes sure that a keytab for this service
contains the key with the same randomly generated password that is set
in the internal Samba databases.
Samba configuration is created by querying an IPA master about details
of trust to Active Directory configuration. All known identity ranges
added to the configuration to allow Samba to properly handle them
(read-only) via idmap_sss.
Resulting configuration allows connection with both NTLMSSP and Kerberos
authentication for IPA users. Access controls for the shared content
should be set by utilizing POSIX ACLs on the file system under a
specific share.
The utility is packaged as freeipa-client-samba package to allow pulling
in all required dependencies for Samba and cifs.ko (smb3.ko) kernel
module. This allows an IPA client to become both an SMB server and an
SMB client.
Fixes: https://pagure.io/freeipa/issue/3999
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
