Only a single cert in DER or PEM format would be loaded from the
provided file. Extend this to include PKCS#7 format and load all
certificates found in the file.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7579
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
"messagebus" is an old, archaic name for dbus. Upstream dbus has started
to move away from the old name. Let's use the modern term in FreeIPA,
too.
Fixes: https://pagure.io/freeipa/issue/7754
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Fix Coverity finding CID 323644: logically dead code path
The code to determine whether NetBIOS name was already set or need to be
set after deriving it from a domain or asking a user for an interactive
input, was refactored at some point to avoid retrieving the whole LDAP
entry. Instead, it was provided with the actual NetBIOS name retrieved.
As result, a part of the code got neglected and was never executed.
Fix this code and provide a test that tries to test predefined,
interactively provided and automatically derived NetBIOS name depending
on how the installer is being run.
We mock up the actual execution so that no access to LDAP or Samba is
needed.
Fixes: https://pagure.io/freeipa/issue/7753
Reviewed-By: Christian Heimes <cheimes@redhat.com>
For smart card authentication, ipaapi must be able to access to sss-ifp.
During installation and upgrade, the ipaapi user is now added to
[ifp]allowed_uids.
The commit also fixes two related issues:
* The server upgrade code now enables ifp service in sssd.conf. The
existing code modified sssd.conf but never wrote the changes to disk.
* sssd_enable_service() no longer fails after it has detected an
unrecognized service.
Fixes: https://pagure.io/freeipa/issue/7751
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Increase log level to info by setting verbose=True and adding
a console format.
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
https://pagure.io/freeipa/issue/7408
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This was previously suppressed because of the log level in
an installation was set to error so it was never displayed
Keeping consistency and demoting it to debug since the
log level is increased to info.
Related: https://pagure.io/freeipa/issue/7408
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
During replica installation the local IP addresses should be
added to DNS but will fail because a string is being passed
to an argument expecting a list. Convert to a list before
passing in individual IPs.
Discovered when fixing https://pagure.io/freeipa/issue/7408
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Don't remove /root/.dogtag/pki-tomcat when performing step 1 of external
CA installation process. Dogtag 10.6.7 changed behavior and no longer
re-creates the client database in step 2.
Fixes: https://pagure.io/freeipa/issue/7742
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-backup gathers all the files needed for the backup, then compresses
the file and finally restarts the IPA services. When the backup is a
large file, the compression may take time and widen the unavailabity
window.
This fix restarts the services as soon as all the required files are
gathered, and compresses after services are restarted.
Fixes: https://pagure.io/freeipa/issue/7632
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When adding the option --setup-adtrust to ipa-replica-install,
we need to check that the package freeipa-server-trust-ad is
installed.
To avoid relying on OS-specific commands like yum, the check is instead
ensuring that the file /usr/share/ipa/smb.conf.empty is present
(this file is delivered by the package).
When the check is unsuccessful, ipa-replica-install exits with an error
message.
Fixes: https://pagure.io/freeipa/issue/7602
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
When we define a group mapping for BUILTIN\Guests to 'nobody' group in
we run 'net groupmap add ...' with a default /etc/samba/smb.conf which
is now configured to use ipasam passdb module. We authenticate to LDAP
with GSSAPI in ipasam passdb module initialization.
If GSSAPI authentication failed (KDC is offline, for example, during
server upgrade), 'net groupmap add' crashes after ~10 attempts to
re-authenticate. This is intended behavior in smbd/winbindd as they
cannot work anymore. However, for the command line tools there are
plenty of operations where passdb module is not needed.
Additionally, GSSAPI authentication uses the default ccache in the
environment and a key from /etc/samba/samba.keytab keytab. This means
that if you'd run 'net *' as root, it will replace whatever Kerberos
tickets you have with a TGT for cifs/`hostname` and a service ticket to
ldap/`hostname` of IPA master.
Apply a simple solution to avoid using /etc/samba/smb.conf when we
set up the group mapping by specifying '-s /dev/null' in 'net groupmap'
call.
For upgrade code this is enough as in
a678336b8b we enforce use of empty
credentials cache during upgrade to prevent tripping on individual
ccaches from KEYRING: or KCM: cache collections.
Related: https://pagure.io/freeipa/issue/7705
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
There were two separate issues:
1. If not enrolling on a pre-configured client then the ntp-server and
ntp-pool options are not being passed down to the client installer
invocation.
2. If the client is already enrolled then the ntp options are ignored
altogether.
In the first case simply pass down the options to the client
installer invocation.
If the client is pre-enrolled and NTP options are provided then
raise an exception.
https://pagure.io/freeipa/issue/7723
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
All Samba utilities load passdb modules from the configuration file. As
result, 'net groupmap' call would try to initialize ipasam passdb module
and that one would try to connect to LDAP using Kerberos authentication.
We should be running it after cifs/ principal is actually created in
ipa-adtrust-install or otherwise setting up group mapping will fail.
This only affects new installations. For older ones 'net groupmap' would
work just fine because adtrust is already configured and all principals
exist already.
A re-run of 'ipa-server-upgrade' is a workaround too but better to fix
the initial setup.
Related: https://pagure.io/freeipa/issue/7705
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The zonemgr validator and handler performs additional encodings for IDNA
support. In Python 3, the extra steps are no longer necessary because
arguments are already proper text and stderr can handle text correctly.
This also fixes 'b' prefix in error messages like:
option zonemgr: b'empty DNS label'
Fixes: https://pagure.io/freeipa/issue/7711
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replace six.moves and six.StringIO/BytesIO imports with cannonical
Python 3 packages.
Note: six.moves.input behaves differently than builtin input function.
Therefore I left six.moves.input for now.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
On Python 3, six.text_type (singular) is an alias for str.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
In Python 3, six.string_types is just an alias for str.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Python 2 had old style and new style classes. Python 3 has only new
style classes. There is no point to subclass from object any more.
See: https://pagure.io/freeipa/issue/7715
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
tox / pytest is complaining about lots and lots of invalid escape
sequences in our code base. Sprinkle raw strings or backslash escapes
across the code base to fix most occurences of:
DeprecationWarning: invalid escape sequence
There is still one warning that keeps repeating, though:
source:264: DeprecationWarning: invalid escape sequence \d
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The method setup_lightweight_ca_key_retrieval is called on
server upgrade and checks first if it needs to be executed or if
a previous upgrade already did the required steps.
The issue is that it looks for setup_lwca_key_retrieval in sysupgrade.state
but writes setup_lwca_key_retieval (with a missing r).
The fix consistently uses setup_lwca_key_retieval (as older installations
may already contain this key in sysupgrade.state).
Fixes https://pagure.io/freeipa/issue/7688
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Samba 4.9 became a bit more strict about creating a local NT token and a
failure to resolve or create BUILTIN\Guests group will cause a rejection
of the connection for a successfully authenticated one.
Add a default mapping of the nobody group to BUILTIN\Guests.
BUILTIN\Guests is a special group SID that is added to the NT token for
authenticated users.
For real guests there is 'guest account' option in smb.conf which
defaults to 'nobody' user.
This was implicit behavior before as 'guest account = nobody' by
default would pick up 'nobody' group as well.
Fixes: https://pagure.io/freeipa/issue/7705
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
There is no need to set options.promote to false anymore for a server
installation in the install function.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This is related to the DL0 code removal. FIRST_MASTER describes this
mode a lot better.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
iWithout DL0 support the custodia mode can be used to determine if a
server or replica will be installed. Therefore the use of config.promote
can be removed.
A new check has been added to make sure the mode known in
get_custodia_instance.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This function is used to load the replica file. Without DL0 support this
is not needed at all anymore.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
create_replica_config is not imported anymore from
ipaserver.install.installutils.
The promote argument has been removed from these functions and function
calls:
- install_replica_ds
- ds.create_replica
- install_krb
- krbinstance.create_replica
- install_http
- httpinstance.create_instance
The function install_check has been removed completely as it is only used
to prepare the DL0 installation.
All DL0 specific code has been removed from the install function.
The varaibles promote, installer.promote/options.promote and config.promote
have bene removed.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The methods _is_promote has been removed from all classes as this has only
been used internally to check if the domain level is correct.
The check if the installer object has the attribute replica_file has been
modified to use the new variable replica_install defined in
CompatServerReplicaInstall instead.
The DL0 specific code from ServerInstallInterface.__init__ has been removed
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replica files are DL0 specific therefore the knob extension for
replica_file has been removed. Also the code that is only executed if
replica_file is not None.
The new variable replica_install has been added which is used in
ServerInstallInterface.__init__
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The argument was not used at all.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The code to add missing KRA certificates has been removed from install_check
as it was only reached if replica_config is not None and promote was False
for DL0 replica installations. Also the other places.
Promote is now hard set to True if replica_config is not None in install
for later use in krainstance.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Promote is now hard set to True in create_replica for later use in
_get_replication_manager.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Replica files are DL0 specific therefore all the code that is related to
replica files have been removed An additional check for the new minimal
domain level has been added. The use of extra args results in an error as
this was only needed for the replica file.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
cainstance.replica_ca_install_check is only used in ca.install_check if
replica_config is not None (replica installation). As it is immediately
stopped if promote is not set, therefore it can be removed.
The check for cafile in ca.install_check has been dropped. promote is set
to True in ca.install_step_0 if replica_config is not None for
cainstance.configure_instance.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This is part of the DL0 code removal. As ipa-replica-prepare is only needed
and useful for domain level 0, the script can be removed.
See: https://pagure.io/freeipa/issue/7689
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
In ipa-replica-install, many components use their own instance
of the FileStore to backup configuration files to the pre-install
state. This causes issues when the calls are mixed, like for
instance:
ds.do_task1_that_backups_file (using ds.filestore)
http.do_task2_that_backups_file (using http.filestore)
ds.do_task3_that_backups_file (using ds.filestore)
because the list of files managed by ds.filestore does not include
the files managed by http.filestore, and the 3rd call would remove
any file added on 2nd call.
The symptom of this bug is that ipa-replica-install does not save
/etc/httpd/conf.d/ssl.conf and subsequent uninstallation does not
restore the file, leading to a line referring to ipa-rewrite.conf
that prevents httpd startup.
The installer should consistently use the same filestore.
Fixes https://pagure.io/freeipa/issue/7684
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-server-install is checking if the forwarder(s) specified with
--forwarder argument support DNSSEC. When the --no-dnssec-validation
option is added, the installer should not perform the check.
Fixes: https://pagure.io/freeipa/issue/7666
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Setting ca_host caused replication failures on DL0
because it was trying to connect to wrong CA host.
Trying to avoid corner-case in ipaserver/plugins/dogtag.py
when api.env.host nor api.env.ca_host had not CA configured
and there was ca_host set to api.env.ca_host variable.
See: https://pagure.io/freeipa/issue/7566
Resolves: https://pagure.io/freeipa/issue/7629
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Commit 811b0fdb46 introduced a regression
when configuring replication with a master < 3.3
Even if 389-ds schema is extended with nsds5ReplicaReleaseTimeout,
nsds5ReplicaBackoffMax and nsDS5ReplicaBindDnGroupCheckInterval
attributes, it will return UNWILLING_TO_PERFORM when a mod
operation is performed on the cn=replica entry.
This patch ignores the error and logs a debug msg.
See: https://pagure.io/freeipa/issue/7617
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Some commands print tracebacks or unclear error message when
they are called on a machine where ipa packages are installed but
IPA is not configured.
Consistently report 'IPA is not configured on this system' in this
case.
Related to https://pagure.io/freeipa/issue/6261
Reviewed-By: Christian Heimes <cheimes@redhat.com>
--no-host-dns is supposed to avoid all DNS lookups so pass
this as the force value when creating the host in a replica
installation.
https://pagure.io/freeipa/issue/7656
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
There was an issue with ipa-server-upgrade and it was
showing an error while upgrading:
DN... does not exists or haven't been updated, caused
by not moving pointer to file begining when re-reading.
Resolves: https://pagure.io/freeipa/issue/7644
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The old domain level check to suggest to use ipa-replica-prepare has been
converted to make sure that domain fulfills minimal domain level
requirement (no DL0).
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
As there is the minimal domain level setting MIN_DOMAIN_LEVEL, it should
be used instead of DOMAIN_LEVEL_0.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This pull should not remove code, therefore it is needed to add addtional
conditionals to calm down pylint beacuse of unreachable code.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Raise "Domain level 0 is not supported anymore" error if there are
remainaing args after parsing. Remove all "DOMAIN LEVEL 0" and
"DOMAIN LEVEL 1" prefixes from the man page.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
In the case that the domain level is set to 0 or replica_file is set (not
None) an error will be raised.
See: https://pagure.io/freeipa/issue/7669
Signed-off-by: Thomas Woerner <twoerner@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The template directory /var/log/dirsrv/slapd-X could be created with the
wrong SELinux context.
Related to: https://pagure.io/freeipa/issue/7662
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The session directory /etc/httpd/alias/ could be created with the wrong
SELinux context. Therefore httpd was not able to write to this directory.
Fixes: https://pagure.io/freeipa/issue/7662
Related-to: 49b4a057f1 (Create missing
/etc/httpd/alias for ipasession.key)
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-replica-install --kra-install can fail when the topology already has
a KRA, but replica is installed from a master with just CA. In that
case, Custodia may pick a machine that doesn't have the KRA auditing and
signing certs in its NSSDB.
Example:
* master with CA
* replica1 with CA and KRA
* new replica gets installed from master
The replica installer now always picks a KRA peer.
The change fixes test scenario TestInstallWithCA1::()::test_replica2_ipa_dns_install
Fixes: https://pagure.io/freeipa/issue/7518
See: https://pagure.io/freeipa/issue/7008
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Globally disabling the following violations:
- `assignment-from-no-return` (E1111):
Assigning to function call which doesn't return. Used when an
assignment is done on a function call but the inferred function
doesn't return anything.
- `keyword-arg-before-vararg` (W1113):
Keyword argument before variable positional arguments list in the
definition of %s function When defining a keyword argument before
variable positional arguments, one can end up in having multiple
values passed for the aforementioned parameter in case the method is
called with keyword arguments.
Locally disabling the following:
- `subprocess-popen-preexec-fn` (W1509):
Using preexec_fn keyword which may be unsafe in the presence of
threads The preexec_fn parameter is not safe to use in the presence
of threads in your application. The child process could deadlock
before exec is called. If you must use it, keep it trivial! Minimize
the number of libraries you call into.
https://docs.python.org/3/library/subprocess.html#popen-constructor
Fixed violations:
- `bad-mcs-classmethod-argument` (C0204):
Metaclass class method %s should have %s as first argument Used when
a metaclass class method has a first argument named differently than
the value specified in valid-metaclass-classmethod-first-arg option
(default to "mcs"), recommended to easily differentiate them from
regular instance methods.
- Note: Actually `cls` is the default first arg for `__new__`.
- `consider-using-get` (R1715):
Consider using dict.get for getting values from a dict if a key is
present or a default if not Using the builtin dict.get for getting a
value from a dictionary if a key is present or a default if not, is
simpler and considered more idiomatic, although sometimes a bit slower
Issue: https://pagure.io/freeipa/issue/7614
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
When multiple replicas are installed in parallel, two replicas may try
to create the cn=replica entry at the same time. This leads to a
conflict on one of the replicas. replica_config() and
ensure_replication_managers() now handle conflicts.
ipaldap now maps TYPE_OR_VALUE_EXISTS to DuplicateEntry(). The type or
value exists exception is raised, when an attribute value or type is
already set.
Fixes: https://pagure.io/freeipa/issue/7566
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Thierry Bordaz <tbordaz@redhat.com>
In order to support pylint 2.0 the following violations must be fixed:
- `chained-comparison` (R1716):
Simplify chained comparison between the operands This message is
emitted when pylint encounters boolean operation like
"a < b and b < c", suggesting instead to refactor it to "a < b < c".
- `consider-using-in` (R1714):
Consider merging these comparisons with "in" to %r To check if a
variable is equal to one of many values,combine the values into a
tuple and check if the variable is contained "in" it instead of
checking for equality against each of the values.This is faster
and less verbose.
Issue: https://pagure.io/freeipa/issue/7614
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Aiming to support pylint 2.0 some functions and methods must have their
return statements updated in order to fix two new violations:
- `useless-return` (R1711):
Useless return at end of function or method Emitted when a single
"return" or "return None" statement is found at the end of function
or method definition. This statement can safely be removed because
Python will implicitly return None
- `inconsistent-return-statements` (R1710):
Either all return statements in a function should return an
expression, or none of them should. According to PEP8, if any return
statement returns an expression, any return statements where no value
is returned should explicitly state this as return None, and an
explicit return statement should be present at the end of the
function (if reachable)
Issue: https://pagure.io/freeipa/issue/7614
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
7284097eed introduced a regression in
DNSSEC master installation. For standalone and replica installation,
services have to be enabled before checking bind config.
Fixes: https://pagure.io/freeipa/issue/7635
See: https://pagure.io/freeipa/issue/7566
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
During parallel replica installation, a request sometimes fails with
CA_REJECTED or CA_UNREACHABLE. The error occur when the master is
either busy or some information haven't been replicated yet. Even
a stuck request can be recovered, e.g. when permission and group
information have been replicated.
A new function request_and_retry_cert() automatically resubmits failing
requests until it times out.
Fixes: https://pagure.io/freeipa/issue/7623
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Tune 389-DS replication settings to improve performance and avoid
timeouts. During installation of a replica, the value of
nsDS5ReplicaBindDnGroupCheckInterval is reduced to 2 seconds. At the end
of the installation, the value is increased sensible production
settings. This avoids long delays during replication.
See: https://pagure.io/freeipa/issue/7617
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Calls to `os.fsync(f.fileno())` need to be accompained by `f.flush()`.
Commit 8bbeedc93f introduces the helper
`ipapython.ipautil.flush_sync()`, which handles all calls in the right
order.
However, `flush_sync()` takes as parameter a file object with fileno
and name, where name must be a path to the file, this isn't possible
in some cases where file descriptors are used.
Issue: https://pagure.io/freeipa/issue/7251
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Extend fix 0f31564b35 to also move
the DS SSL setup so that the xmlrpc_uri is configured to point
to the remote master we are configuring against.
https://pagure.io/freeipa/issue/7566
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Commit 7284097eed kept
find_providing_servers('CA') call before enable_services(). Therefore the
list of known CA servers did not contain the current replica.
ipa-replica-install on the first replica with --setup-ca still printed
the CA topology warning.
See: https://pagure.io/freeipa/issue/7566
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Service entries in cn=FQDN,cn=masters,cn=ipa,cn=etc are no longer
created as enabled. Instead they are flagged as configuredService. At
the very end of the installer, the service entries are switched from
configured to enabled service.
- SRV records are created at the very end of the installer.
- Dogtag installer only picks fully installed servers
- Certmonger ignores all configured but not yet enabled servers.
Fixes: https://pagure.io/freeipa/issue/7566
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Fix `ERROR 'str' object has no attribute 'decode'` when --zonemgr is
passed to ipa-server-install.
Solution copied from commit 75d26e1f01,
function `ipaserver.install.bindinstance.zonemgr_callback` duplicates
the behavior of the method affected by this patch.
Issue: https://pagure.io/freeipa/issue/7612
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
- Add missing executable bits to all scripts
- Remove executable bits from all files that are not scripts,
e.g. js, html, and Python libraries.
- Remove Python shebang from all Python library files.
It's frown upon to have executable library files in site-packages.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Armando Neto <abiagion@redhat.com>
Skip the existing reverse zone overlap check during DNS installation
when both --auto-reverse and --allow-zone-overlap arguments are
provided.
https://pagure.io/freeipa/issue/7239
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipaldap's LDAPClient client turns INVALID_CREDENTIAL error into
ACIError. Catch the ACIError and wait until the user has been
replicated.
Apparently no manual or automated test ran into the timeout during
testing.
Fixes: Fixes: https://pagure.io/freeipa/issue/7593
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Make CA bundles, certs, and cert directories world-accessible in
upgrader.
Fixes: https://pagure.io/freeipa/issue/7594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The directory /etc/httpd/alias contains public key material. It must be
world readable and executable, so any client can read public certs.
Note: executable for a directory means, that a process is allowed to
traverse into the directory.
Fixes: https://pagure.io/freeipa/issue/7594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In CIS hardened mode, the process umask is 027. This results in some
files not being world readable. Ensure that write_certificate_list()
calls in client installer, server installer, and upgrader create cert
bundles with permission bits 0644.
Fixes: https://pagure.io/freeipa/issue/7594
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
DogtagInstance.setup_admin and related methods have multiple LDAP
replication race conditions. The bugs can cause parallel
ipa-replica-install to fail.
The code from __add_admin_to_group() has been changed to use MOD_ADD
ather than search + MOD_REPLACE. The MOD_REPLACE approach can lead to
data loss, when more than one writer changes a group.
setup_admin() now waits until both admin user and group membership have
been replicated to the master peer. The method also adds a new ACI to
allow querying group member in the replication check.
Fixes: https://pagure.io/freeipa/issue/7593
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Instead of multiple timeout values all over the code base, all
replication waits now use a common timeout value from api.env of 5
minutes. Waiting for HTTP/replica principal takes 90 to 120 seconds, so
5 minutes seem like a sufficient value for slow setups.
Fixes: https://pagure.io/freeipa/issue/7595
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
replication.wait_for_entry() now can wait for an attribute value to
appear on a replica.
Fixed timeout handling caused by bad rounding and comparison. For small
timeouts, the actual time was rounded down. For example for 60 seconds
timeout and fast replica, the query accumulated to about 0.45 seconds
plus 60 seconds sleep. 60.45 is large enough to terminate the loop
"while int(time.time()) < timeout", but not large enough to trigger the
exception in "if int(time.time()) > timeout", because int(60.65) == 60.
See: https://pagure.io/freeipa/issue/7593
Fixes: https://pagure.io/freeipa/issue/7595
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
ipa-replica-install only set ca_host in its temporary
/etc/ipa/default.conf, when it wasn't installing a replica with CA. As a
consequence, the replica installer was picking a random CA server from
LDAP.
Always set the replication peer as ca_host. This will ensure that the
installer uses the same replication peer for CA. In case the replication
peer is not a CA master, the installer will automatically pick another
host later.
See: https://pagure.io/freeipa/issue/7566
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
The server installer had no console logger set so print
statements were used for communication. Now that a logger
is enabled the extra prints need to be dropped.
A number of logger.info statements have been upgraded
to debug since they do not need to appear on the console
by default.
https://pagure.io/freeipa/issue/6760
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The server installation and uninstallation overlaps both the
server and client installers. The output could be confusing
with a server uninstall finishing with the message:
The ipa-client-install command was successful
This was in part due to the fact that the server was not
configured with a console format and verbose was False which
meant that no logger messages were displayed at all.
In order to suppress client installation errors and avoid
confusion add a list of errors to ignore. If a server install
was not successful and hadn't gotten far enough to do the
client install then we shouldn't complain loudly about it.
https://pagure.io/freeipa/issue/6760
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Increase the WSGI daemon worker process count from 2 processes to 5
processes. This allows IPA RPC to handle more parallel requests. The
additional processes increase memory consumption by approximante 250 MB
in total.
Since memory is scarce on 32bit platforms, only 64bit platforms are
bumped to 5 workers.
Fixes: https://pagure.io/freeipa/issue/7587
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The schema compat plugin is disabled on upgrades but it is
possible that it is not configured at all and this will
produce a rather nasty looking error message.
Check to see if it is configured at all before trying to
disable it.
https://pagure.io/freeipa/issue/6610
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Sometimes named-pkcs11 is not being stopped or reloaded during
uninstall and it causes a lot of problems while testing, for example,
backup and restore tests are failing because of ipa-server-install
fails on checking DNS step.
Fixes backup/restore tests runs. Maybe something else.
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Fix 994f71ac8a was incomplete. Under some
circumstancs the DM hash and CA keys were still retrieved from two different
machines.
Custodia client now uses a single remote to upload keys and download all
secrets.
Fixes: https://pagure.io/freeipa/issue/7518
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
If this is enabled it can cause a deadlock with SSSD trying
to look up entries and it trying to get data on AD users
from SSSD.
When reading the entry from LDIF try to get the camel-case
nsslapd-pluginEnabled and fall back to the all lower-case
nsslapd-pluginenabled if that is not found. It would be nice
if the fetch function was case sensitive but this is likely
overkill as it is, but better safe than blowing up.
Upon restoring it will always write the camel-case version.
https://pagure.io/freeipa/issue/6721
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
PR https://github.com/freeipa/freeipa/pull/1747 added the first template
for FreeIPA client package. The template file was added to server
templates, which broke client-only builds.
The template is now part of a new subdirectory for client package shared
data.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The server, replica, and client installer now print the current version
number on the console, before the actual installer starts. It makes it
easier to debug problems with failed installations. Users typically post
the console output in a ticket.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The password was only indirectly validated when trying to
disable replication agreements for the restoration.
Only validate the password if the IPA configuration is available
and dirsrv is running.
https://pagure.io/freeipa/issue/7136https://pagure.io/freeipa/issue/7535
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The site and module configs are split on Debian, server setup needs
to match that.
Fixes: https://pagure.io/freeipa/issue/7554
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
And since Fedora 28 dropped support for non-64bit, hardcode default LIBARCH as 64.
Fixes: https://pagure.io/freeipa/issue/7555
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
kadmind doesn't start without it, and Debian doesn't ship it by default.
Fixes: https://pagure.io/freeipa/issue/7553
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
OpenLDAP has deprecated PORT and HOST stanzes in ldap.conf. The presence
of either option causes FreeIPA installation to fail. Refuse
installation when a deprecated and unsupported option is present.
Fixes: https://pagure.io/freeipa/issue/7418
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
When IPA is installed with an externally signed CA, the master installer
does not publish the whole cert chain in /usr/share/ipa/html/ca.crt (but
/etc/ipa/ca.crt contains the full chain).
If a client is installed with a One-Time Password and without the
--ca-cert-file option, the client installer downloads the cert chain
from http://master.example.com/ipa/config/ca.crt, which is in fact
/usr/share/ipa/html/ca.crt. The client installation then fails.
Note that when the client is installed by providing admin/password,
installation succeeds because the cert chain is read from the LDAP server.
https://pagure.io/freeipa/issue/7526
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-backup and ipa-restore now use GnuPG 2 for asymmetric encryption, too.
The gpg2 command behaves a bit different and requires a gpg2 compatible
config directory. Therefore the --keyring option has been deprecated.
The backup and restore tools now use root's GPG keyring by default.
Custom configuration and keyring can be used by setting GNUPGHOME
environment variables.
Fixes: https://pagure.io/freeipa/issue/7560
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The /usr/bin/gpg command is old, legacy GnuPG 1.4 version. The
recommended version is GnuPG 2 provided by /usr/bin/gpg2. For simple
symmentric encryption, gpg2 is a drop-in replacement for gpg.
Fixes: https://pagure.io/freeipa/issue/7560
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
mod_ssl's limiting of client cert verification depth was causing
the replica installs to fail when master had been installed with
external CA since the SSLCACertificateFile was pointing to a file
with more than one certificate. This is caused by the default
SSLVerifyDepth value of 1. We set it to 5 as that should be
just about enough even for possible sub-CAs.
https://pagure.io/freeipa/issue/7530
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The director /etc/httpd/alias was created by mod_nss. Since FreeIPA no
longer depends on mod_nss, the directory is no longer created on fresh
systems.
Note: At first I wanted to move the file to /var/lib/ipa/private/ or
/var/lib/httpd/. SELinux prevents write of httpd_t to ipa_var_lib_t. I'm
going to move the file after a new SELinux policy is available.
See: https://pagure.io/freeipa/issue/7529
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The NSSDatabase object doesn't know the format of an NSS database
until the database is created so an explcit call to nssdb.create_db.
https://pagure.io/freeipa/issue/7469
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Introduce server installation constants similar to the client
but only tie in SERVER_NOT_CONFIGURED right now.
For the case of not configured don't spit out the "See <some log>
for more information" because no logging was actually done.
In the case of ipa-backup this could also be confusing if the
--log-file option was also passed in because it would not be
used.
https://pagure.io/freeipa/issue/6843
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
This will allow for whitespace around the separator and changes the
default space separator into white space (space + tabs) to be more
generic and work better on Ubuntu which uses tabs in its Apache
configuration.
https://pagure.io/freeipa/issue/7490
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
We added the separator to the regex in set_directive_lines to avoid
grabbing just a prefix. This doesn't allow for whitespace around
the separator.
For the Apache case we expected that the separator would be just
spaces but it can also use tabs (like Ubuntu 18). Add a special
case so that passing in a space separator is treated as whitespace
(tab or space).
https://pagure.io/freeipa/issue/7490
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
The password was only indirectly validated when trying to
disable replication agreements for the restoration.
https://pagure.io/freeipa/issue/7136
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The installer reports the CA configuration that will be used,
including whether the CA is self-signed or externally-signed.
Installation with external CA takes two steps. The first step
correctly reports the externally signed configuration (like the
above), but the second step reports a self-signed configuration.
The CA *is* externally signed, but the configuration gets reported
incorrectly at step 2. This could confuse the administrator. Fix
the message.
Fixes: https://pagure.io/freeipa/issue/7523
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Because krb5 silently ignores unrecognized options, this is safe on
all versions. It lands upstream in krb5-1.17; in Fedora, it was added
in krb5-1.6-17.
Upstream documentation can be found in-tree at
https://github.com/krb5/krb5/blob/master/doc/admin/spake.rst
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The authconfig tool is deprecated and replaced by authselect. Migrate
FreeIPA in order to use the new tool as described in the design page
https://www.freeipa.org/page/V4/Authselect_migration
Fixes:
https://pagure.io/freeipa/issue/7377
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Installers now pass a single CustodiaInstance object around, instead of
creating new instances on demand. In case of replica promotion with CA,
the instance gets all secrets from a master with CA present. Before, an
installer created multiple instances and may have requested CA key
material from a different machine than DM password hash.
In case of Domain Level 1 and replica promotion, the CustodiaInstance no
longer adds the keys to the local instance and waits for replication to
other replica. Instead the installer directly uploads the new public
keys to the remote 389-DS instance.
Without promotion, new Custodia public keys are still added to local
389-DS over LDAPI.
Fixes: https://pagure.io/freeipa/issue/7518
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Simo Sorce <ssorce@redhat.com>
Without GSSPROXY_CONF being backed up, we would get this error
"ipa: ERROR: No valid Negotiate header in server response"
when running any ipa command after a backup restore.
This commit also fixes the tests:
- TestBackupAndRestore::test_full_backup_and_restore
- TesttBackupAndRestore::test_full_backup_and_restore_with_selinux_booleans_off
https://pagure.io/freeipa/issue/7473
Reviewed-By: Christian Heimes <cheimes@redhat.com>
CA replica installation fails, because 'caSigningCert cert-pki-ca' is
imported a second time under a different name. The issue is caused
by the fact, that SQL NSS DB handles duplicated certificates differently
than DBM format.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1561730
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The option realm was being passed in instead of realm_name.
https://pagure.io/freeipa/issue/7489
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexey Slaykovsky <alexey@slaykovsky.com>
Add absolute_import from __future__ so that pylint
does not fail and to achieve python3 behavior in
python2.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
We already validate that --setup-dns is specified when any of
DNS-related options provided by a user. Do the same for --setup-adtrust
case.
Fixes: https://pagure.io/freeipa/issue/7410
Reviewed-By: Christian Heimes <cheimes@redhat.com>
389-ds 1.3.5 changed the error message format for
nsds5ReplicaLastUpdateStatus value. Now it produces
"Error (%d) %s" instead of "%d %s".
Change the check_repl_update() to handle both formats.
Fixes: https://pagure.io/freeipa/issue/7442
Reviewed-By: Christian Heimes <cheimes@redhat.com>
When we attempt to update an entry during upgrade, it may have already
contain the data in question between the check and the update. Ignore
the change in this case and record it in the log.
Fixes: https://pagure.io/freeipa/issue/7450
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Commit afc0d4b62d added an upgrade
step that add an attribute to a replica config entry. The entry
only exists after a replica has been added, so upgrade was broken
for standalone server. Catch and suppress the NotFound error.
Related to: https://pagure.io/freeipa/issue/7488
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The nsds5ReplicaReleaseTimeout setting prevents the monopolization of
replicas during initial or busy master-master replication. 389-DS
documentation suggets a timeout of 60 seconds to improve convergence of
replicas.
See: http://directory.fedoraproject.org/docs/389ds/design/repl-conv-design.html
Fixes: https://pagure.io/freeipa/issue/7488
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
According to a comment, certutil may create files in the current working
directory. Rather than changing the cwd of the current process,
FreeIPA's certutil wrapper now changes cwd for the subprocess only.
See: https://pagure.io/freeipa/issue/7416
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
In replica DL1 installation, the --ip-address option was not passed
down to the ipa-client-install script (when not promoting client).
This resulted in creating DNS records for all of the host's interface
IP adresses instead of just those specified.
This patch passes all the --ip-address options down to the client
installation script.
https://pagure.io/freeipa/issue/7405
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Without ldap_uri, IPAKEMKeys parses /etc/ipa/default.conf. During
uninstallation, the file may no longer contain ldap_uri. This workaround
is required for test case
test_replica_promotion.py::TestReplicaPromotionLevel0::test_promotion_disabled
Fixes: https://pagure.io/freeipa/issue/7474
Co-authored-by: Felipe Barreto <fbarreto@redhat.com>
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
When there was no ntp-server option specified configuration
of chrony was skipped even in case that there was ntp-pool
option passed to the installation of client/server.
Moved duplicates of prints from client to server.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
FreeIPA will always force chrony service and disable any
other conflicting time synchronization daemon.
Add --ntp-server option to server manpage and note to NTP pool option.
Addresses: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Remove NTP server role from config.py.
Remove uneccesary variables and replaced untrack_file with restore_file.
Update typo in manpages and messages printed while installing.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Removing ntpd configuration files and entry from LDAP.
Add parameter and rename method for restoring forced time
services. Addressing some requests for change too.
Remove unused path for chrony-helper.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This will change behaviour that FreeIPA server will be no more
ntpd server and time service is no longer part of FreeIPA topology.
As dependency for ntpd was completely removed, and there is only
dependency for chrony, FreeIPA will configure every host to
became chronyd service's clients.
FreeIPA have not supported --ntp-server option now it must to
support client configuration of chrony.
Configuration of chrony is moved to client-install therefore
NTP related options are now passed to the ipa-client-install
script method sync_time which now handles configuration of chrony.
Server installation has to configure chrony before handling
certificates so there is call to configure chrony outside of
using server's statestore and filestore.
Removed behavior that there is always --no-ntp option set.
Resolves: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Completely remove ipaserver/install/ntpinstance.py
This is no longer needed as chrony client configuration
is now handled in ipa-client-install.
Part of ipclient/install/client.py related to ntp configuration
has been refactored a bit to not lookup for srv records
and/or run chrony if not necessary.
Addresses: https://pagure.io/freeipa/issue/7024
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The installer now checks that port 8080 is available and not in use by
any other application.
The port checker has been rewritten to use bind() rather than just
checking if a server responds on localhost. It's much more reliable and
detects more problems.
Original patch by m3gat0nn4ge.
Co-authored-by: Mega Tonnage <m3gat0nn4ge@gmail.com>
Fixes: https://pagure.io/freeipa/issue/7415
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Add a note in cainstance.configure_instance that "admin_password" is
the password to be used for the PKI admin account, NOT the IPA admin
password. In fact, it is set to the Directory Manager password.
This comment would have saved me some time during recent
investigation of a replica installation issue.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Commit aee0d2180c adds an upgrade step
that adds system crypto policy include to named.conf. This step
omitted the named.conf existence check; upgrade fails when it does
not exist. Add the existence check.
Also update the test to add the IPA-related part of the named.conf
config, because the "existence check" actually does more than just
check that the file exists - it also check that it contains the IPA
bind-dyndb-ldap configuration section.
Part of: https://pagure.io/freeipa/issue/4853
Reviewed-By: Christian Heimes <cheimes@redhat.com>
With the recent encryption of the HTTPD keys, it's also necessary
to count with this scenario during upgrade and create the password
for the HTTPD private key along the cert/key pair.
This commit also moves the HTTPD_PASSWD_FILE_FMT from ipalib.constants
to ipaplatform.paths as it proved to be too hard to be used that way.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Christian Heimes <cheimes@redhat.com>
For redundancy and security against catastrophic failure of a CA
master, there must be more than one CA master in a topology.
Replica installation is a good time to warn about this situation.
Print a warning at the end of ipa-replica-install, if there is only
one CA replica in the topology.
Fixes: https://pagure.io/freeipa/issue/7459
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Use temporary empty DIR-based ccache collection to prevent upgrade
failures in case KCM: or KEYRING: ccache type is used by default in
krb5.conf and is not available. We don't need any user credentials
during upgrade procedure but kadmin.local would attempt to resolve
default ccache and if that's not available, kadmin.local will fail.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1558818
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
This commit adds configuration for HTTPD to encrypt/decrypt its
key which we currently store in clear on the disc.
A password-reading script is added for mod_ssl. This script is
extensible for the future use of directory server with the
expectation that key encryption/decription will be handled
similarly by its configuration.
https://pagure.io/freeipa/issue/7421
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
ipa-{server,kra}-install logs have been showing warnings about
deprecation of some Dogtag configuration options. Follow
the warnings' advice and rename these options to their newer
form.
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Koksharov <akokshar@redhat.com>
With e6c707b168 we changed httpd
configuration to use abstracted out variables in the template.
However, during upgrade we haven't resolved these variables so an
upgrade from pre-e6c707b168067ebb3705c21efc377acd29b23fff install will
fail.
Add all missing variables to the upgrade code.
Fixes https://pagure.io/freeipa/issue/7454
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
During ipa-replica-install, http installation first creates a service
principal for http/hostname (locally on the soon-to-be-replica), then
waits for this entry to be replicated on the master picked for the
install.
In a later step, the installer requests a certificate for HTTPd. The local
certmonger first tries the master defined in xmlrpc_uri (which is
pointing to the soon-to-be-replica), but fails because the service is not
up yet. Then certmonger tries to find a master by using the DNS and looking
for a ldap service. This step can pick a different master, where the
principal entry has not always be replicated yet.
As the certificate request adds the principal if it does not exist, we can
end by re-creating the principal and have a replication conflict.
The replication conflict later causes kerberos issues, preventing
from installing a new replica.
The proposed fix forces xmlrpc_uri to point to the same master as the one
picked for the installation, in order to make sure that the master already
contains the principal entry.
https://pagure.io/freeipa/issue/7041
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Configure the status request timeout, i.e. the connect/data timeout
on the HTTP request to get the status of Dogtag.
This configuration is needed in "multiple IP address" scenarios
where this server's hostname has multiple IP addresses but the HTTP
server is only listening on one of them. Without a timeout, if a
"wrong" IP address is tried first, it will take a long time to
timeout, exceeding the overall timeout hence the request will not be
re-tried. Setting a shorter timeout allows the request to be
re-tried.
Note that HSMs cause different behaviour so this value might not be
suitable for when we implement HSM support. It is known that a
value of 5s is too short in HSM environment.
This fix requires pki-core >= 10.6.0, which is already required by
the spec file.
Fixes: https://pagure.io/freeipa/issue/7425
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
DogtagInstance.backup_config uses shutil.copy to create a backup of the
config file. The function does not retain owner and group, so it creates a
backup as user and group root:root.
Closes: https://pagure.io/freeipa/issue/7426
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexey Slaykovsky <alexey@slaykovsky.com>
Installer now prints runtime of each step / part to install log.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When ipa-restore is called, it needs to delete the file
nss.conf, otherwise httpd server will try to initialize
the NSS engine and access NSSCertificateDatabase.
This is a regression introduced with the switch from NSS
to SSL.
https://pagure.io/freeipa/issue/7440
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
ipa-server-install creates the kerberos container by calling
kdb5_util create -s -r $REALM -x ipa-setup-override-restrictions
but does not react on failure of this command. The installer fails later
when trying to create a ldap principal, and it is difficult to diagnose the
root cause.
The fix raises a RuntimeException when kdb5_util fails, to make sure
that the installer exits immediately with a proper error message.
Note: no test added because there is no easy reproducer. One would need to
stop dirsrv just before calling kdb5_util to simulate a failure.
https://pagure.io/freeipa/issue/7438
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
The fix_trust_flags upgrade procedure pertains to the old Apache
mod_nss setup. With the move to mod_ssl, it now raises an
exception, so remove it.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The disable system trust feature is no longer used.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
CertDB no longer makes any assumptions about the default db type of a NSS
DB. Instead it let's certutil decide when dbtype is set to 'auto'. This
makes it much easier to support F27 and F28 from a single code base.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
- Refactor CertDB to look up values from its NSSDatabase.
- Add run_modutil() helpers to support sql format. modutil does not
auto-detect the NSSDB format.
- Add migration helpers to CertDB.
- Add explicit DB format to NSSCertificateDatabase stanza
- Restore SELinux context when migrating NSSDB.
- Add some debugging and sanity checks to httpinstance.
The actual database format is still dbm. Certmonger on Fedora 27 does
neither auto-detect DB format nor support SQL out of the box.
https://pagure.io/freeipa/issue/7354
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Add storage='NSSDB' to various places. It makes it a bit easier to track
down NSSDB usage.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
We should backup mod_ssl configuration when migrating from nss
otherwise the uninstall would later leave the machine with
IPA-specific settings.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Adjust the HTTPInstance.__publish_ca_cert() method so that it only
exports the lowest intermediate CA certificate that signed the
HTTP certificate.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Verify the certificate issued during an installation belongs
to its private key.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Backup mod_nss configuration in case IPA is uninstalled once
and there's applications that require it. We too required it
in previous versions, after all.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The import_ca_certs_{file,nssdb} methods were actually exporting
CA certificates from LDAP to different formats. The new names should
better reflect what these methods are actually doing.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fixes ipa-server-upgrade when upgrading from a pre-mod_ssl
version where the appropriate "Include" statement needs to
be added to ssl.conf settings so that WebUI functions properly.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This refactors the way certificate files are replaced during
ipa-server-certinstall and uses that approach on KDC and
HTTPD certificate cert-key pairs.
https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Part of the mod_nss -> mod_ssl move. This patch allows loading
necessary certificates for Apache to function from PKCS#12 files.
This should fix CA-less and domain level 0 installations.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Fix the upload_cacrt.py plugin to use the DS NSS database to
upload the CA certificate from (which is the original behavior).
This is possibly required for the upgrade path from some very
old IPA versions that did not use the certificates storage in
LDAP.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When setting a value using set_directive() look for a commented-out
version of the directive and add the new value immediately after
that to keep the proper context.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
This is because if backed up it may contain IPA-specific entries
like an import of ipa-rewrite.conf that on uninstall won't exist
and this will keep Apache from restarting.
We already have a backup of nss.conf from pre-install. Stick with
that.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The existing private/public keys are migrated to PEM files
via a PKCS#12 temporary file. This should work for both
IPA-generated and user-provided server certificates.
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Change some built-in assumptions that Apache has an NSS certificate
database.
Configure mod_ssl instead of mod_nss. This is mostly just changing
the directives used with some slight syntactical differences.
Drop mod_nss-specific methods and functions.
There is some mention of upgrades here but this is mostly a
side-effect of removing things necessary for the initial install.
TODO:
- backup and restore
- use user-provided PKCS#12 file for the certificate and key
Related: https://pagure.io/freeipa/issue/3757
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Mocked tests require the mock package for Python 2.7. Python 3 has
unittest.mock in the standard library.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
The Python 3 refactoring effort is finishing, it should be safe
to turn all scripts to run in Python 3 by default.
https://pagure.io/freeipa/issue/4985
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Replace all ldap.initialize() calls with a helper function
ldap_initialize(). It handles cacert and cert validation correctly. It
also provides a unique place to handle python-ldap 3.0 bytes warnings in
the future.
Fixes: https://pagure.io/freeipa/issue/7411
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
If after ipa-restore the service oddjobd is not running,
domain-level1 replica installation will fail during
ipa-replica-conncheck because this step is using oddjob
to start the process ipa-replica-conncheck on the master.
This patch fixes it. Also added regression test.
https://pagure.io/freeipa/issue/7234
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
If the replication agreement does not exist, a custom exception is
raised explaining the problem.
https://pagure.io/freeipa/issue/7201
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Instead of a package conflict, freeIPA now uses an Apache config file to
enforce the correct wsgi module. The workaround only applies to Fedora
since it is the only platform that permits parallel installation of
Python 2 and Python 3 mod_wsgi modules. RHEL 7 has only Python 2 and
Debian doesn't permit installation of both variants.
See: https://pagure.io/freeipa/issue/7161
Fixes: https://pagure.io/freeipa/issue/7394
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
KRA installer restarts 389-DS, which disrupts named-pkcs11
bind-dyndb-ldap for a short while. Restart named-pkcs11 to fix DNS
resolver.
Fixes: https://pagure.io/freeipa/issue/5813
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
389-DS >= 1.4.0 on Fedora 28 has a default entry for
cn=RSA,cn=encryption,cn=config. The installer now updates the entry in
case it already exists. This ensures that token and personality are
correct for freeIPA
Fixes: https://pagure.io/freeipa/issue/7393
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When renewing externally-signed CA or when switching from
externally-signed to self-signed CA, the Issuer DN can change.
Update the ipaCaIssuerDn field of the IPA CA entry upon renewal, to
keep it in sync.
Fixes: https://pagure.io/freeipa/issue/7316
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Use is_installed() instead of is_configured() because
is_installed() does a config file check to see if the service
is in use.
https://pagure.io/freeipa/issue/7389
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Several run() calls used hard-coded paths rather than pre-defined paths
from ipaplatform.paths. The patch fixes all places that I was able to
find with a simple search.
The fix simplifies Darix's port of freeIPA on openSuSE.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The ipa-server-upgrade command now checks for presence of ipa-custodia's
config and server keys. In case any of the files is missing, it
re-creates both files.
Partly resolves https://pagure.io/freeipa/issue/6893. The upgrader does
not auto-detect broken or mismatching keys yet.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Integration test is failing due to wrong message being
displayed by ipa. This issue was most probably introduced
by PR:
f51869bf52
Error messages for domain level 0 and >=1 cases were basically
swapped. This PR is swapping them back.
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Present Situation:
Logging is a bit incomplete when using a custom CA subject passed in via --ca-subject.
If there is a problem finding the IPA CA certificate then the installer will log:
ERROR IPA CA certificate not found in /tmp/servercert.pem, /tmp/cacert.pem
After the Fix this sort of log is seen:
ipa.ipapython.install.cli.install_tool(CompatServerMasterInstall): DEBUG The ipa-server-install command failed, exception: ScriptError: IPA CA certificate with subject 'CN=Certificate Authority,O=GSSLAB.PNQ2.REDHAT.COM' was not found in /root/ipa.cert, /root/rootCA.crt.
Resolves: https://pagure.io/freeipa/issue/7245
Reviewed-By: Tibor Dudlak <tdudlak@redhat.com>
Mistake in recent fixes made the ipa-replica-prepare include
some extra files in the info file should the legacy format of
NSS databases be used.
https://pagure.io/freeipa/issue/7049
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Implicit string concatenation is technically correct, too. But when
combined in list, it's confusing for both human eye and static code
analysis.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Replace exit() with sys.exit(). exit() or quit() may fail if the interpreter
is run with the -S option.
https://pagure.io/freeipa/issue/7344
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
The Custodia instance is removed when LDAP is already shut down. Don't
fail and only remove the key files from disk. The server_del command
takes care of all Custodia keys in LDAP.
https://pagure.io/freeipa/issue/7318
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Enabling ephemeral KRA requests will reduce the amount of LDAP
write operations and improve overall performance.
Re-order some imports and shorten some lines to make pep8 happy.
Fixes: https://pagure.io/freeipa/issue/6703
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
Rather than passing around the path to CS.cfg for the CA and KRA
set it at object creation and use everywhere.
Make update_cert_config() a real class method instead of a static
method. It wasn't being called that way in any case and makes it
possible to use the class config file.
Related: https://pagure.io/freeipa/issue/6703
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
KRA installation currently imports the admin cert. FreeIPA does not
track this cert and it may be expired, causing installation to fail.
Do not import the existing admin cert, and discard the new admin
cert that gets created during KRA installation.
Part of: https://pagure.io/freeipa/issue/7287
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
installutils.set_directive() is both inefficient and potentially
dangerous. It does not ensure that the whole file is written and
properly synced to disk. In worst case it could lead to partially
written or destroyed config files.
The new DirectiveSetter context manager wraps everything under an easy
to use interface.
https://pagure.io/freeipa/issue/7312
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
To separate concerns and make it easier to test set_directive,
extract function ``set_directive_lines`` to do the line-wise
search/replace, leaving ``set_directive`` to deal with the file
handling.
Part of: https://pagure.io/freeipa/issue/7288
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
`set_directive` only looks for a prefix of the line matching the
given directive (key). If a directive is encountered for which the
given key is prefix, it will be vanquished.
This occurs in the case of `{ca,kra}.sslserver.cert[req]`; the
`cert` directive gets updated after certificate renewal, and the
`certreq` directive gets clobbered. This can cause failures later
on during KRA installation, and possibly cloning.
Match the whole directive to avoid this issue.
Fixes: https://pagure.io/freeipa/issue/7288
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
During a distro upgrade, e.g. F-26 to F-27, networking may not
be available which will cause the upgrade to fail. Despite this
the IPA service can be subsequently restarted running new code
with old data.
This patch relies on the existing version-check cdoe to determine
when/if an upgrade is required and will do so during an ipactl
start or restart.
The upgrade is now run implicitly in the spec file and will
cause the server to be stopped after the package is installed
if the upgrade fails.
Fixes: https://pagure.io/freeipa/issue/6968
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Currently we do not report what Subject DN or subject base will be
used for the CA installation. This leads to situations where the
administrator wants a different Subject DN later. Display these
data as part of the "summary" prior to the final go/no-go prompt in
ipa-server-install and ipa-ca-install.
The go/no-go prompt in ipa-ca-install is new. It is suppressed for
unattended installations.
Fixes: https://pagure.io/freeipa/issue/7246
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Keys are removed from disk and LDAP
https://pagure.io/freeipa/issue/7253
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
When ipa-replica-install is called in a CA-less environment, the certs,
keys and pins need to be provided with --{http|dirsrv|pkinit}-cert-file and
--{http|dirsrv|pkinit}-pin. If the pin is not provided in the CLI options,
and in interactive mode, the installer prompts for the PIN.
The issue happens when the keys are not protected by any PIN, the installer
does not accept an empty string and keeps on asking for a PIN.
The fix makes sure that the installer accepts an empty PIN. A similar fix
was done for ipa-server-install in
https://pagure.io/freeipa/c/4ee426a68ec60370eee6f5aec917ecce444840c7
Fixes:
https://pagure.io/freeipa/issue/7274
Reviewed-By: Christian Heimes <cheimes@redhat.com>
