ipa-server-install creates the kerberos container by calling
kdb5_util create -s -r $REALM -x ipa-setup-override-restrictions
but does not react on failure of this command. The installer fails later
when trying to create a ldap principal, and it is difficult to diagnose the
root cause.
The fix raises a RuntimeException when kdb5_util fails, to make sure
that the installer exits immediately with a proper error message.
Note: no test added because there is no easy reproducer. One would need to
stop dirsrv just before calling kdb5_util to simulate a failure.
https://pagure.io/freeipa/issue/7438
Reviewed-By: Robbie Harwood <rharwood@redhat.com>
Add storage='NSSDB' to various places. It makes it a bit easier to track
down NSSDB usage.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Several run() calls used hard-coded paths rather than pre-defined paths
from ipaplatform.paths. The patch fixes all places that I was able to
find with a simple search.
The fix simplifies Darix's port of freeIPA on openSuSE.
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The message about an error during replica setup was causing the
users to think the installation gone wrong even though this was
an expected behavior when ipa-replica-install was ran without
--no-pkinit flag and CA somehow is not reachable which defines
that there is something wrong in a topology but does not lead
to failure of the replica's installation. So now installation
will not print error messages to stdout but rather will give a
recomendation to user and write the old error message to log
as a warning so it still will be easy to find if needed.
https://pagure.io/freeipa/issue/7179
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Add `includedir /etc/krb5.conf.d` to /etc/krb5.conf only if
/etc/krb5.conf.d exists.
Do not rely on /etc/krb5.conf.d to enable the certauth plugin.
This fixes install on platforms which do not have /etc/krb5.conf.d.
https://pagure.io/freeipa/issue/6589
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Lukas Slebodnik <lslebodn@redhat.com>
Set `pkinit_pool` in `kdc.conf` to a CA certificate bundle of all CAs known
to IPA.
Make sure `cacert.pem` is exported in all installation code paths.
Use the KDC certificate itself as a PKINIT anchor in `login_password`.
https://pagure.io/freeipa/issue/6831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Set `pkinit_anchors` in `krb5.conf` to a CA certificate bundle of CAs
trusted to issue KDC certificates rather than `/etc/ipa/ca.crt`.
Set `pkinit_pool` in `krb5.conf` to a CA certificate bundle of all CAs
known to IPA.
Make sure both bundles are exported in all installation code paths.
https://pagure.io/freeipa/issue/6831
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
ipa-server-install with external CA fails to issue pkinit certs.
This happens because the installer calls
krb = krbinstance.KrbInstance(fstore)
then
krb.enable_ssl()
and in this code path self.config_pkinit is set to None, leading to a wrong
code path.
The fix initializes the required fields of the krbinstance before calling
krb.enable_ssl.
https://pagure.io/freeipa/issue/6921
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Abhijeet Kasurde <akasurde@redhat.com>
The anonymous principal will now be checked for presence and created on
both server and replica install. This fixes errors caused during replica
installation against older master that do not have anonymous principal
present.
https://pagure.io/freeipa/issue/6799
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
After PKINIT certificate is requested and everything is set up, we
should attempt to perform anonymous PKINIT and fail hard if it does not
work for some reason.
https://pagure.io/freeipa/issue/6739
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
This is to ensure that we can request PKINIT certs once all the
following requirements are in place:
* CA is configured or PKCS#12 file is provided
* LDAP, KDC and Apache are configured and the master role is thus
completed and enabled
https://pagure.io/freeipa/issue/6739
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
On the first master the framework may not be fully functional to server
certificate requests. It is safer to configure helper that contacts
Dogtag REST API directly.
https://pagure.io/freeipa/issue/6739
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The certmonger request handling code during pkinit setup actually never
correctly handled situations when certificate request was rejected by
the CA or CA was unreachable. This led to subtle errors caused by broken
anonymous pkinit (e.g. failing WebUI logins) which are hard to debug.
The code should behave as other service installers, e. g. use
`request_and_wait_for_cert` method which raises hard error when request
times out or is not granted by CA. On master contact Dogtag CA endpoint
directly as is done in DS installation.
https://pagure.io/freeipa/issue/6739
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Time estimates have been updated to be more accurate. Only
tasks that are estimated to take longer than 10 seconds have
the estimate displayed.
https://pagure.io/freeipa/issue/6596
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Currently, it was only possible to request an NSS certificate
via certmonger. Merged start_tracking methods and refactored them
to allow for OpenSSL certificates tracking.
https://fedorahosted.org/freeipa/ticket/5695
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
The anonymous user allows the framework to obtain an armor ccache without
relying on usable credentials, either via a keytab or a pkinit and
public certificates. This will be needed once the HTTP keytab is moved away
for privilege separation.
https://fedorahosted.org/freeipa/ticket/5959
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
SHARE_DIR and PLUGIN_SHARE_DIR depend on ipaplatform.
Replace all uses of SHARE_DIR with paths.USR_SHARE_IPA_DIR and remove
both SHARE_DIR and PLUGIN_SHARE_DIR.
https://fedorahosted.org/freeipa/ticket/6474
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
pylint is having a hard time with distutils.version in tox's virtual
envs. virtualenv uses some tricks to provide a virtual distutils
package, pylint can't cope with.
https://github.com/PyCQA/pylint/issues/73 suggests to use pkg_resources
instead. pkg_resources' version parser has some more benefits, e.g. PEP
440 conformity. But pkg_resources.parse_version() is a heavy weight solution
with reduced functionality, e.g. no access to major version.
For API_VERSION and plugin version we can use a much simpler and faster
approach.
https://fedorahosted.org/freeipa/ticket/6468
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Martin Basti <mbasti@redhat.com>
Reviewed-By: Martin Babinsky <mbabinsk@redhat.com>
Set up initial replication using GSSAPI also in domin level 0. For this to
work, the supplied DM password is used to connect to remote master and set up
agreements. The workflow is unchanged in DL1 where GSSAPI bind as host or
admin is used.
This obsoletes the conversion of replication agreements to GSSAPI made in DL0
during KDC installation.
https://fedorahosted.org/freeipa/ticket/6406
Reviewed-By: Martin Basti <mbasti@redhat.com>
DS replica can now use remote API and ipa-getkeytab to create service
principal and fetch the keytab in both domain levels. There is no need to use
KDC installer to do it.
https://fedorahosted.org/freeipa/ticket/6405
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Instead of delegating handling of some parameters like fstore to the parent
class, the *Instance installers had the logic copy-pasted in their
constructors. Some other members were also moved to the Service class and the
parent class constructors in children were fixed to modern standards of
initializing parent class in Python.
https://fedorahosted.org/freeipa/ticket/6392
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
In order to unify domain-level specific replica installers to a single
workflow some kind of host enrollment must be done also in domain level 0
replica installation.
Here the enrollment is done by directory manager using
one-time password and only krb5.conf is configured to point to master KDC.
Since host keytab is fetched during enrollment KDC installer no longer needs
to request it during replica install.
https://fedorahosted.org/freeipa/ticket/6434
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
This commit removes unused variables or rename variables as "expected to
be unused" by using "_" prefix.
This covers only cases where fix was easy or only one unused variable
was in a module
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Reviewed-By: Stanislav Laznicka <slaznick@redhat.com>
Wildcard imports should not be used.
Check for wildcard imports has been enabled in pylint.
Pylint note: options 'wildcard-import' causes too much false positive
results, so instead it I used 'unused-wildcard-import' option which has almost
the same effect.
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
The ipautil.run function now returns an object with returncode and
output are accessible as attributes.
The stdout and stderr of all commands are logged (unless skip_output is given).
The stdout/stderr contents must be explicitly requested with a keyword
argument, otherwise they are None.
This is because in Python 3, the output needs to be decoded, and that can
fail if it's not decodable (human-readable) text.
The raw (bytes) output is always available from the result object,
as is "leniently" decoded output suitable for logging.
All calls are changed to reflect this.
A use of Popen in cainstance is changed to ipautil.run.
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
This patch implements a new flag --promote for the ipa-replica-install command
that allows an administrative user to 'promote' an already joined client to
become a full ipa server.
The only credentials used are that of an administrator. This code relies on
ipa-custodia being available on the peer master as well as a number of other
patches to allow a computer account to request certificates for its services.
Therefore this feature is marked to work only with domain level 1 and above
servers.
Ticket: https://fedorahosted.org/freeipa/ticket/2888
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-By: Jan Cholasta <jcholast@redhat.com>
