Move the SID-related options into a separate InstallInterface
(--add-sids, --netbios-name, --rid-base and --secondary-rid-base),
make ADTrustInstallInterface inherit from SIDInstallInterface.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Test Steps:
1. Setup a freeipa server and a replica
2. Stop ipa-custodia service on replica
3. Create a LWCA on the replica
4. Verify LWCA is recognized on the server
5. Run `ipa ca-show <LWCA>`
BZ Link: https://bugzilla.redhat.com/show_bug.cgi?id=1958788
Signed-off-by: Sumedh Sidhaye <ssidhaye@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
New PR-CI template based on compose `Fedora-Rawhide-20211021.n.0`,
future Fedora 36.
Signed-off-by: Armando Neto <abiagion@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Previously, `test_master_install_ca1` and `test_master_install_ca2`
attempt to create tempdirs on local host and later write some
content into the returned paths on remote host. This fails if
a remote host is a local one.
The existent `create_temp_file` function has been extended to
support `suffix` option of `mktemp`.
Fixes: https://pagure.io/freeipa/issue/9013
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
The default platform task enable_sssd_sudo() writes directly
to nsswitch.conf to enable sudo. This isn't necessary to do on
systems with authselect where we already pass in with-sudo as a
profile option.
Override the default function with does a direct write with a no-op.
https://pagure.io/freeipa/issue/8755
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add design doc for the feature.
Related: https://pagure.io/freeipa/issue/8995
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
ipa-server-install uninstaller must remove samba *.tdb files
in /var/lib/samba, /var/lib/samba/private and /var/lib/samba/lock.
The current code calls rm on the relative path filename
instead of building an absolute path filename,
resulting in failure to remove the tdb files.
Related: https://pagure.io/freeipa/issue/8687
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
ipa-client-samba uninstaller must remove samba *.tdb files
in /var/lib/samba, /var/lib/samba/private and /var/lib/samba/lock.
The current code calls rm on the relative path filename
instead of building an absolute path filename,
resulting in failure to remove the tdb files.
Fixes: https://pagure.io/freeipa/issue/8687
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Default YAML loader has been deprecated in PyYAML-6.0, specify loader explicitly.
Fixes: https://pagure.io/freeipa/issue/9009
Signed-off-by: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Michal Polovka <mpolovka@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
As of 21.3 pip:
> Remove the --build-dir option and aliases, one last time. (pypa/pip#10485)
https://pip.pypa.io/en/stable/news/#v21-3
Previous versions warn about deprecation.
The builddir is provided to pip via env variable PIP_BUILD in Tox task.
The purpose of changing of default builddir was noexec mount option for
/tmp in Travis (see 17d571c961). Since Travis is no longer used and
Azure lacks this issue the PIP_BUILD can be safely removed.
Note: pip 21.3 just ignores this env variable, which is more than can be
said for the command line option. It's better to clean it up, since the
behaviour may be changed in future.
This is effectively the revert of 17d571c961.
Fixes: https://pagure.io/freeipa/issue/9011
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
I don't know why this wasn't always multi-value but if one wanted
to set multiple options they needed to call add-option multiple
times. The LDAP attribute is already multi-value.
This shouldn't cause API issues as it understood the attribute as
multi-value just didn't expose it. Client output on the CLI will
look a bit different:
Added option "('one', 'two')" to Sudo Rule "test"
or
Added option "(u'one', u'Two')" to Sudo Rule "test"
instead of with this change:
Added option "one,two" to Sudo Rule "test"
Removing an option works in a similar way.
The value is normalized on the client side in order to ensure that
the option value is always a tuple.
https://pagure.io/freeipa/issue/2278
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The above test is installing 2 Let's Encrypt certificates:
the root ISRG Root X1 and a subca. The subca expired Oct 6 and needs to
be replaced with a valid one, otherwise ipa-cacert-manage install
refuses to install it.
Fixes: https://pagure.io/freeipa/issue/9006
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
Get size of the log file immediately before main test action to avoid
capturing messages written to log during environment preparation.
Fixes https://pagure.io/freeipa/issue/8987
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
The test test_undo_refresh_reset_update_cancel is sometimes
failing because a notification obscures the selinuxmap record.
After saving the modification on the record, close any notification
to make sure the test succeeds.
Fixes: https://pagure.io/freeipa/issue/8846
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Anuja More <amore@redhat.com>
The test TestIpaHealthCheckWithExternalCA::test_ipahealthcheck_ipaopensslchainvalidation
needs to be adapted with the new error message returned by
openssl verify when the provided certificate file does not exist.
The message changed with openssl3.
Fixes: https://pagure.io/freeipa/issue/8999
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
With the new version sos-4.2-1, sos report -v prints the
debug messages into sos.log only. In order to see the debug
messages in the console, -vv is needed.
For more info refer to sos report commit
1d0729a9dc
Since the test is looking for messages in stdout, use -vv to
make sure the expected messages are printed in the console.
Fixes: https://pagure.io/freeipa/issue/9000
Reviewed-By: Mohammad Rizwan Yusuf <myusuf@redhat.com>
There is a file context equivalence rule assigning /run the same
contexts as /var/run. Because of it it's necessary to use /var/run
instead of /run in file context definitions.
See:
https://fedoraproject.org/wiki/SELinux/IndependentPolicy#File_contexts_and_equivalency_rules
Signed-off-by: Vit Mojzis <vmojzis@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Tracker is the best for testing plugins dealing with LDAP.
The tests in test_schema_plugin are not used LDAP at all.
Fixes: https://pagure.io/freeipa/issue/8954
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
It's common for ipa commands to raise NotFound in such a case.
Fixes: https://pagure.io/freeipa/issue/8954
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Previously, all the commands of schema plugin derived from
BaseMetaSearch require metaobject as their argument
(by implementation), but the spec for some of them only optionally
asks for search criteria arg. This patch fixes this inconsistency.
Fixes: https://pagure.io/freeipa/issue/8954
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Prevent regressions in the LDAP cache layer that caused newly
issued certificates to overwrite existing ones.
https://pagure.io/freeipa/issue/8986
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
usercertificate often has a subclass and both the plain and
subclassed (binary) values are queried. I'm concerned that
they are used more or less interchangably in places so not
caching these entries is the safest path forward for now until
we can dedicate the time to find all usages, determine their
safety and/or perhaps handle this gracefully within the cache
now.
What we see in this bug is that usercertificate;binary holds the
first certificate value but a user-mod is done with
setattr usercertificate=<new_cert>. Since there is no
usercertificate value (remember, it's usercertificate;binary)
a replace is done and 389-ds wipes the existing value as we've
asked it to.
I'm not comfortable with simply treating them the same because
in LDAP they are not.
https://pagure.io/freeipa/issue/8986
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Fraser Tweedale <ftweedal@redhat.com>
SSSD provides Kerberos plugin
> to tell the Kerberos libraries what Realm and which KDC to use.
It's useful to see what is happening during kinit in case of any
issues.
Related: https://pagure.io/freeipa/issue/8353
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
There are time gaps in which kinit requests may fail due to
offlined SSSD's locator and replication delays.
Since `IPA` provider or SSSD offline the locator plugin for libkrb5
(man 8 sssd_krb5_locator_plugin) can do nothing about this and kinit
fallbacks to the standard libkrb5 algorithm described in `man 5 krb5.conf`.
`krb5.conf` on IPA server doesn't include `kpasswd_server` and kinit
fallbacks to DNS way. DNS (URI or SRV) RRs don't preserve any order
and kinit may contact either master or replica kpasswd servers.
This may result in a password was changed on a replica but was not
replicated to master:
master(kinit)->master(initial)->replica(kpasswd)->master(can't
obtain initial creds with new password)
So, `kpasswd_server` serves as fallback for the offlined locator.
Note: primary_kdc(the former master_kdc) doesn't help here because
it is only used if the initial credentials obtaining fails (see
`krb5_get_init_creds_password` in libkrb5) and not a password change.
Fixes: https://pagure.io/freeipa/issue/8353
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Francois Cami <fcami@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Sometimes tar fails on changed in process files:
```
[2021-09-07 11:03:33] + tar --ignore-failed-read -czf ipaserver_install_logs.tar.gz --warning=no-failed-read /var/log/dirsrv /var/log/httpd2 /var/log/ipa /var/log/ipaclient-install.log /var/log/ipa-custodia.audit.log /var/log/ipaserver-install.log /var/log/krb5kdc.log /var/log/pki /var/log/samba /var/lib/bind/data systemd_journal.log
[2021-09-07 11:03:33] tar: Removing leading `/' from member names
[2021-09-07 11:03:33] tar: Removing leading `/' from hard link targets
[2021-09-07 11:03:33] tar: /var/log/dirsrv/slapd-IPA-TEST/access: file changed as we read it
[2021-09-07 11:03:33] + tests_result=1
```
This is expected failure since processes are not stopped during logs
collection and can flush their logs.
Fixes: https://pagure.io/freeipa/issue/8983
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Add a template for new features in doc/designs/template.md
The template is excluded from automatic doc generation.
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
OpenSSH 8.7p1 changed the message logged on successful
authentication (see commit 9e1882ef6489a7dd16b6d7794af96629cae61a53).
As a result, the method run_ssh_cmd is failing and needs to be
adapted in order to be compatible with old and new openssh versions.
Fixes: https://pagure.io/freeipa/issue/8989
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Using JSON by default within Dogtag appears to cause ipa cert-find to
return JSON, when the request was made with XML. We can request that XML
is returned as before by specifying so in the request header.
Fixes: https://pagure.io/freeipa/issue/8980
Signed-off-by: Chris Kelley <ckelley@redhat.com>
Reviewed-By: Francois Cami <fcami@redhat.com>
The logic of test_reset_password_unlock is twisted.
Currently it's doing:
- reset password on replicas[0]
- wait for replication on master
- kinit on master
The call to wait_for_replication should be done on
replicas[0], not on master, according to the method doc:
Note that this waits for updates originating on this host, not those
coming from other hosts.
Fixes: https://pagure.io/freeipa/issue/8975
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Migrate-ds needs to check if compat tree is enabled before
migrating users and groups. The check is doing a base
search on cn=compat,$SUFFIX and considers the compat tree
enabled when the entry exists.
Due to a bug in slapi-nis, the base search may return NotFound
even though the compat tree is enabled. The workaround is to
perform a base search on cn=users,cn=compat,$SUFFIX instead.
Fixes: https://pagure.io/freeipa/issue/8984
Reviewed-By: Alexander Bokovoy <abokovoy@redhat.com>
The integration tests are using rpcclient delivered
by samba package. With samba 4.15, the options have
been renamed and "--use-kerberos=desired" must be
used instead of "-k".
(see
https://download.samba.org/pub/samba/rc/samba-4.15.0rc4.WHATSNEW.txt)
Adapt the test to be compatible with both old and new versions.
Fixes: https://pagure.io/freeipa/issue/8979
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Mohammad Rizwan <myusuf@redhat.com>
A similar change was attempted years ago in commit
9724251292 but it was
never applied because it used the wrong DN and because
nsslapd-timelimit is already present in the entry
the default keyword won't trigger.
Use replace instead to increase the value to 100k from
the default as originally intended.
nsslapd-sizelimit can be changed only with a MOD_REPLACE
otherwise a LDAP_NO_SUCH_ATTRIBUTE error is thrown. IPA
only uses MOD_REPLACE for single-value attributes but
nsslapd-sizelimit is not yet in schema. Add it to
the known set of exceptions for single-value attributes.
https://pagure.io/freeipa/issue/8962
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
Previously, the subid-match command would output the full
DN of the owner of the matched range.
With this change, the UID of the owner is displayed, just like
for other subid- commands.
Fixes: https://github.com/freeipa/freeipa/pull/6001
Signed-off-by: François Cami <fcami@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Rather than stopping the installer entirely, catch and report
errors adding new certificate profiles, and remove the
broken profile entry from LDAP so it may be re-added later.
It was discovered that installing a newer IPA that has the
ACME profile which requires sanToCNDefault will fail when
installing a new server against a very old one that lacks
this class.
Running ipa-server-upgrade post-install will add the profile
and generate the missing ipa-ca SAN record so that ACME
can work.
https://pagure.io/freeipa/issue/8974
Signed-off-by: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <frenaud@redhat.com>
If a client sends a request to lookup an object from a given trusted
domain by UID or GID and an object with matching ID is only found in a
different domain the extdom should return LDAP_NO_SUCH_OBJECT to
indicate to the client that the requested ID does not exists in the
given domain.
Resolves: https://pagure.io/freeipa/issue/8965
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
MIT KRB5 1.15 introduced KDC service discovery with URI records.
_kerberos and _kpasswd URI records can provide TCP, UDP, and Kerberos
KDC-Proxy references. URI lookups take precedence over SRV lookups,
falling back to SRV lookups if no URI records are found.
Also reduce TTL for system records from one day to one hour. It allows
users to remove or update discovery entries in a timely fashion.
See: https://web.mit.edu/kerberos/krb5-latest/doc/admin/realm_config.html#kdc-discovery
Fixes: https://pagure.io/freeipa/issue/8968
Signed-off-by: Christian Heimes <cheimes@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
On aarch64, custodia creates AVC when accessing /proc/cpuinfo.
According to gcrypt manual
(https://gnupg.org/documentation/manuals/gcrypt/Configuration.html),
/proc/cpuinfo is used on ARM architecture to read the hardware
capabilities of the CPU. This explains why the issue happens only
on aarch64.
audit2allow suggests to add the following:
allow ipa_custodia_t proc_t:file { getattr open read };
but this policy would be too broad. Instead, the patch is using
the interface kernel_read_system_state.
Fixes: https://pagure.io/freeipa/issue/8972
Signed-off-by: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Christian Heimes <cheimes@redhat.com>
The DogtagInstance.spawn_instance() and uninstall() have
been modified to specify the paths of PKI installation
logs using --log-file option on PKI 11.0.0 or later.
This allows IPA to have a full control over the log files
instead of relying on PKI's default log files.
Fixes: https://pagure.io/freeipa/issue/8966
Signed-off-by: Endi Sukma Dewata <edewata@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: François Cami <fcami@redhat.com>
When a test is executed around midnight and is checking the
journal content with --since=date, it needs to specify the
whole date (with day and time) to avoid missing entries.
If for instance --since=23:59:00 is used and the current time is
now 00:01:00, --since=23:59:00 would refer to a date in the
future and no journal entry will be found.
Fixes: https://pagure.io/freeipa/issue/8953
Reviewed-By: Stanislav Levin <slev@altlinux.org>
Reviewed-By: François Cami <fcami@redhat.com>
Many of IPA Python scripts are shebang configurable scripts and
have special suffix '.in' for that. Pycodestyle by default check
only '*.py' files [0].
[0]: https://pycodestyle.pycqa.org/en/latest/intro.html
Fixes: https://pagure.io/freeipa/issue/8961
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: François Cami <fcami@redhat.com>
- previously, fastlint make's target includes both the Pylint task
and pycodestyle one. The purpose of this target is a fast checking
only for changed Python files. This makes sense for pycodestyle, but
limits Pylint due to a context(file) checking. The clients which
call the code being linted are not checked at all. In Azure Pylint
(for the whole codebase) is run in the Lint task, this makes fastlint
extra for Azure.
- `Quick code style check` task used distro's Pylint, while `Lint`
task PyPI's one. This may cause different results and confuse a
user.
- `Build` task takes time longer than `Lint` one, so this change
doesn't lead to increased CI time.
- all Azure tests depend on Build and Lint tasks. Mostly it's no need
to run tests due to a probably broken code.
Fixes: https://pagure.io/freeipa/issue/8961
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: François Cami <fcami@redhat.com>
LDAP/HTTP/PKINIT certificates should be renewd on replica after
moving system date. Test was failing because ipa-cert-fix ran
while these cert was not renewd and it tried to fix it.
This test adds check for replication before calling ipa-cert-fix
on replica.
Fixes: https://pagure.io/freeipa/issue/8815
Signed-off-by: Mohammad Rizwan <myusuf@redhat.com>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Sergey Orlov <sorlov@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
- the base testing of this command is made by ipaclient `schema`
remote plugin, but some specifics are not covered
- allow testing of the plugin in `development` mode(locked API).
Fixes: https://pagure.io/freeipa/issue/8955
Signed-off-by: Stanislav Levin <slev@altlinux.org>
Reviewed-By: Florence Blanc-Renaud <flo@redhat.com>
Reviewed-By: Rob Crittenden <rcritten@redhat.com>
