WebAuthn have updated their specification to set the maximum size of the
CredentialID to 1023 bytes. This is somewhat larger than our current
size and therefore we need to migrate.
The PR changes the struct to add CredentialIDBytes and migrates the CredentialID string
to the bytes field before another migration drops the old CredentialID field. Another migration
renames this field back.
Fix#20457
Signed-off-by: Andrew Thornton <art27@cantab.net>
There is a subtle bug in the code relating to collating the results of
`git ls-files -u -z` in `unmergedFiles()`. The code here makes the
mistake of assuming that every unmerged file will always have a stage 1
conflict, and this results in conflicts that occur in stage 3 only being
dropped.
This PR simply adjusts this code to ensure that any empty unmergedFile
will always be passed down the channel.
The PR also adds a lot of Trace commands to attempt to help find future
bugs in this code.
Fix#19527
Signed-off-by: Andrew Thornton <art27@cantab.net>
The code in modules/ssh/ssh.go:sessionHandler() currently cause an error to be
logged if `gitea serv` exits with a exit(1). This logging is useless because the
accompanying stderr is not provided and in any case the exit(1) is most likely due
to permissions errors.
Further it then causes the EOF to be logged - even though this is not helpful.
This PR simply checks the errors returned and stops logging them.
In the case of misconfigurations causing `gitea serv` to fail with exit(1)
the current logging is not helpful at determining this and users should simply
review the message passed over the ssh connection.
Fix#20473
Signed-off-by: Andrew Thornton <art27@cantab.net>
The LastCommitCache code is a little complex and there is unnecessary
duplication between the gogit and nogogit variants.
This PR adds the LastCommitCache as a field to the git.Repository and
pre-creates it in the ReferencesGit helpers etc. There has been some
simplification and unification of the variant code.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Cron will try to run certain things at startup but these depend on multiple things
being set-up. Therefore we should initialize cron last.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent context deadline error propagation in GetCommitsInfo
Although `WalkGitLog` tries to test for `context.DeadlineExceededErr`
there is a small chance that the error will propagate to the reader
before it is recognised. This will cause the error to propagate up to
`renderDirectoryFiles` and cause a http status 500.
Here we check that the error passed is a `DeadlineExceededErr` via error.Is
Fix#20329
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately there is a bug in #20108 where the translation call was
not updated to use `.locale` from `.i18n`.
This PR updates the template to use `.locale`.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately it appears that 2048 bit RSA keys can occasionally be created in such
a way that they appear to have 2047 bit length. This PR simply changes our defaults to
allow these.
Fix#20249
Signed-off-by: Andrew Thornton <art27@cantab.net>
The use of `m-4 text black` for the notification bell results in this
icon being shifted upwards. Instead we should use the `item` class but
adjust `not-mobile` and `mobile-only` to make their `display: none`
settings `!important`.
(As an aside: This is probably one of the only times we should use
`!important` in our less files and the rest should be avoided or
removed.)
Ref #20069
Revert #20236
Signed-off-by: Andrew Thornton <art27@cantab.net>
The uid provided to the group filter must be properly escaped using the provided
ldap.EscapeFilter function.
Fix#20181
Signed-off-by: Andrew Thornton <art27@cantab.net>
Users who are following or being followed by a user should only be
displayed if the viewing user can see them.
Signed-off-by: Andrew Thornton <art27@cantab.net>
The recent changes to add live-reloading to the i18n translation files made the i18n code totally non-concurrent when using dev. This will make discovering other concurrency related issues far more difficult. This PR fixes these, adds some more comments to the code and slightly restructures a few functions.
Signed-off-by: Andrew Thornton <art27@cantab.net>
The current version of bluemonday is double escaping attributes.
This PR updates bluemonday to the version that fixes this.
(See: microcosm-cc/bluemonday#143 )
Fix#19860
Signed-off-by: Andrew Thornton art27@cantab.net
Unforunately the previous PR #20035 created indices that were not helpful
for SQLite. This PR adjusts these after testing using the try.gitea.io db.
Fix#20129
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR adds a doctor command to write the commit-graphs for the repositories:
`gitea doctor --run check-commit-graphs --fix`
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR adds a new manager command to switch on SQL logging and to turn it off.
```
gitea manager logging log-sql
gitea manager logging log-sql --off
```
Signed-off-by: Andrew Thornton <art27@cantab.net>
There appears to be a strange bug whereby the comment_id index can sometimes be missed
or missing from the action table despite the sync2 that should create it in the earlier
part of this migration. However, looking through the code for Sync2 there is no need
for this pre-code to exist and Sync2 should drop/create the indices as necessary.
I think therefore we should simplify the migration to simply be Sync2.
Signed-off-by: Andrew Thornton <art27@cantab.net>
fgprof is a sampling Go profiler that allows you to analyze On-CPU as
well as Off-CPU (e.g. I/O) time together.
Go's builtin sampling CPU profiler can only show On-CPU time, but it's
better than fgprof at that. Go also includes tracing profilers that can
analyze I/O, but they can't be combined with the CPU profiler.
fgprof is designed for analyzing applications with mixed I/O and CPU
workloads. This kind of profiling is also known as wall-clock profiling.
Whilst fgprof can cause significant STW latencies in applications with a
lot of goroutines (> 1-10k), these latencies only occur if the profile
is requested - it doesn't cause a delay by simply being available.
The fgprof profile is mounted on
`http://localhost:6060/debug/fgprof?seconds=3`
Signed-off-by: Andrew Thornton <art27@cantab.net>
It appears possible that stopwatches can become orphaned or have been orphaned in
the past.
This PR adds Orphan checks for Stopwatches.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Empty log queue on flush and close
It is possible for log events to remain in the buffer off the multichannelledlog
and thus not be logged despite close or flush.
This PR simply adds a function to empty the queue before closing or flushing.
(Except when the logger is paused.)
Reference #19982
Signed-off-by: Andrew Thornton <art27@cantab.net>
* and do similar for ChannelledLog
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
If there are dangling stopwatches with missing issues there will be repeated
logging of Unable to APIFormat stopwatches. These are unhelpful and instead
we should only log if the error is not an issue not exist error.
And we should also prevent an error on missing issue in GetActiveStopwatch too
Signed-off-by: Andrew Thornton <art27@cantab.net>
gitea doctor --run check-db-consistency is currently broken due to an incorrect
and old use of Count() with a string.
Signed-off-by: Andrew Thornton <art27@cantab.net>
When migrating git repositories we should ensure that the commit-graph is written.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Add fetch.writeCommitGraph to gitconfig to ensure that a commit-graph will be written
on git fetch calls.
Signed-off-by: Andrew Thornton <art27@cantab.net>
A pr.Reviewer may be nil when migrating from Gitea if this is a team
request review.
We do not migrate teams therefore we cannot map these requests, but we can
migrate user requests.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Automatically add sidebar in the wiki view containing a TOC for the wiki page.
Make the TOC collapsable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Ensure minimum mirror interval is reported on settings page
Expecting users to guess the minimum mirror interval appears a little unkind.
In this PR we simply change the locale string to include the minimum interval.
This will of course be affected by our current localization framework but...
we can fix that else where.
This PR also includes some fixes for error handling on the settings page as
previously the mirror block amongst others would simply disappear on error.
Fix#3737
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update options/locale/locale_en-US.ini
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update options/locale/locale_en-US.ini
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make AppDataPath absolute against the AppWorkPath if it is not
There are multiple repeated issues whereby a non-absolute provided
APP_DATA_PATH causes strange issues.
This PR simply absolutes the APP_DATA_PATH against the AppWorkPath if
its not so. It also ensures that AppWorkPath is also always absolute.
Ref #19367
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
* absolute workpath against pwd instead of app path first
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Milestones in archived repos should not be displayed on `/milestones`. Therefore
we should exclude these repositories from milestones page.
Fix#18257
Signed-off-by: Andrew Thornton <art27@cantab.net>
When Gitea is running as PID 1 git will occassionally orphan child processes leading
to (defunct) processes. This PR simply sets Setpgid to true on these child processes
meaning that these defunct processes will also be correctly reaped.
Fix#19077
Signed-off-by: Andrew Thornton <art27@cantab.net>
A `repo_model.Mirror` repository field (`.Repo`) will not automatically
be set, but is used without checking in mirror_pull.go:UpdateAddress.
This will cause an NPE.
This PR changes UpdateAddress to use the helper function GetRepository()
helping prevent future NPEs but also changes modules/context/repo.go to
ensure that the Mirror.Repo is set.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Looking through the logs of try.gitea.io I am seeing a number of reports
of being unable to APIformat stopwatches because the issueID is 0. These
are invalid StopWatches and they represent a db inconsistency.
This PR simply stops sending them to the eventsource.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add title attribute to dependencies in sidebar
Add the full title as the title attribute on dependencies in
the sidebar.
Fix#19806
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
In order for web.Wrap to be able to detect if a response has been written
we need to wrap any non-context.ResponseWriters as a such. Otherwise
responses will be incorrectly detected as non-written to and handlers can
double run.
In the case of GZip this handler will change the response to a non-context.RW
and this failure to correctly detect response writing causes fallthrough and
a NPE.
Fix#19839
Signed-off-by: Andrew Thornton <art27@cantab.net>
If the context is cancelled `.NotificationUnreadCount` in a template can
cause an infinite loop with `ctx.ServerError()` being called, which
creates a template that then calls `.NotificationUnreadCount` calling
`GetNotificationCount()` with the cancelled context resulting in an
error that calls `ctx.ServerError`... and so on...
This PR simply stops calling `ctx.ServerError` in the error handler code
for `.NotificationUnreadCount` as we have already started rendering and
so it is too late to call `ctx.ServerError`. Additionally we skip
logging the error if it's a context cancelled error.
Fix#19793
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The cache service can be disabled - at which point ctx.Cache will be nil
and the use of it will cause an NPE.
The main part of this PR is that the cache is used for restricting
resending of activation mails and without this we cache we cannot
restrict this. Whilst this code could be re-considered to use the db and
probably should be, I think we can simply disable this code in the case
that the cache is disabled.
There are also several bug fixes in the /nodeinfo API endpoint.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Our character detection algorithm can potentially incorrectly detect utf-8 as iso-8859-x
if there is a truncated character at the end of the partially read file.
This PR changes the detection algorithm to truncated utf8 characters at the end of the
buffer.
Fix#19743
Signed-off-by: Andrew Thornton <art27@cantab.net>
The permissions created in convertRepo use a minimal perm.AccessModeRead instead of
correctly computing the permission for the repository. This incorrect permission is
then reported to the user.
I do not believe that reporting the permissions is helpful and therefore I propose
we simply null these out. The user can check their permissions using a different
endpoint.
Fix#19759
Signed-off-by: Andrew Thornton <art27@cantab.net>
Although the use of LastModified dates for caching of git objects should be
discouraged (as it is not native to git - and there are a LOT of ways this
could be incorrect) - LastModified dates can be a helpful somewhat more human
way of caching for simple cases.
This PR adds this header and handles the If-Modified-Since header to the /raw/
routes.
Fix#18354
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
There is a potential rare race possible whereby the c.running channel could
be closed twice. Looking at the code I do not see a need for this c.running
channel and therefore I think we can remove this. (I think the c.running
might have been some attempt to prevent a hang but the use of os.Pipes should
prevent that.)
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Within doArchive there is a service goroutine that performs the
archiving function. This goroutine reports its error using a `chan
error` called `done`. Prior to this PR this channel had 0 capacity
meaning that the goroutine would block until the `done` channel was
cleared - however there are a couple of ways in which this channel might
not be read.
The simplest solution is to add a single space of capacity to the
goroutine which will mean that the goroutine will always complete and
even if the `done` channel is not read it will be simply garbage
collected away.
(The PR also contains two other places when setting up the indexers
which do not leak but where the blocking of the sending goroutine is
also unnecessary and so we should just add a small amount of capacity
and let the sending goroutine complete as soon as it can.)
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
TestAPIGitTag (and likely others) will fail if the running environment contains
GIT_AUTHOR_NAME and other env variables like it.
This PR simply unsets these when running the integration tests.
Fix#14247
Signed-off-by: Andrew Thornton <art27@cantab.net>
If an `os/exec.Command` is passed non `*os.File` as an input/output, go
will create `os.Pipe`s and wait for their closure in `cmd.Wait()`. If
the code following this is responsible for closing `io.Pipe`s or other
handlers then on process death from context cancellation the `Wait` can
hang.
There are two possible solutions:
1. use `os.Pipe` as the input/output as `cmd.Wait` does not wait for these.
2. create a goroutine waiting on the context cancellation that will close the inputs.
This PR provides the second option - which is a simpler change that can
be more easily backported.
Closes#19448
Signed-off-by: Andrew Thornton <art27@cantab.net>
* When dumping trim the standard suffices instead of a random suffix
Instead of using the `path.Ext()` to trim the last "extension" suffix, just iterate
through the supported suffices and trim those.
Fix#19424
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix enum with to have correct supported types only
Co-authored-by: 6543 <6543@obermui.de>
When a mirror repo interval is updated by the UI it is rescheduled with that interval
however the API does not do this. The API also lacks the enable_prune option.
This PR adds this functionality in to the API Edit Repo endpoint.
Signed-off-by: Andrew Thornton <art27@cantab.net>
There appears to be an intermittent NPE in queue tests relating to the deferred
shutdown/terminate functions.
This PR more formally asserts that shutdown and termination occurs before starting
and finishing the tests but leaves the defer in place to ensure that if there is an
issue shutdown/termination will occur.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Continues on from #19202.
Following the addition of pprof labels we can now more easily understand the relationship between a goroutine and the requests that spawn them.
This PR takes advantage of the labels and adds a few others, then provides a mechanism for the monitoring page to query the pprof goroutine profile.
The binary profile that results from this profile is immediately piped in to the google library for parsing this and then stack traces are formed for the goroutines.
If the goroutine is within a context or has been created from a goroutine within a process context it will acquire the process description labels for that process.
The goroutines are mapped with there associate pids and any that do not have an associated pid are placed in a group at the bottom as unbound.
In this way we should be able to more easily examine goroutines that have been stuck.
A manager command `gitea manager processes` is also provided that can export the processes (with or without stacktraces) to the command line.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately #18789 disabled autoregistration using email addresses as they would
be shortcut to email address does not exist.
This PR attempts to restore autoregistration by allowing an unknown email address
to percolate through to the autoregistration path of UserSignin.
Fix#19256
Signed-off-by: Andrew Thornton <art27@cantab.net>
Strangely #19038 appears to relate to an issue whereby a tag appears to
be listed in `git show-ref --tags` but then does not appear when `git
show-ref --tags -- short_name` is called.
As a solution though I propose to stop the second call as it is
unnecessary and only likely to cause problems.
I've also noticed that the tags calls are wildly inefficient and aren't using the common cat-files - so these have been added.
I've also noticed that the git commit-graph is not being written on mirroring - so I've also added writing this to the migration which should improve mirror rendering somewhat.
Fix#19038
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
There is yet another problem with conflicted files not being reset when
the test patch resolves them.
This PR adjusts the code for checkConflicts to reset the ConflictedFiles
field immediately at the top. It also adds a reset to conflictedFiles
for the manuallyMerged and a shortcut for the empty status in
protectedfiles.
Signed-off-by: Andrew Thornton <art27@cantab.net>
As discussed on #19221 we should store the results of the last task message on the
crontask and show them on the monitor page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds the necessary work to make it possible to create files on empty
repos using the API.
Fix#10993
Signed-off-by: Andrew Thornton <art27@cantab.net>
There is a bug in the system webhooks whereby the active state is not checked when
webhooks are prepared and there is a bug that deactivating webhooks do not prevent
queued deliveries.
* Only add SystemWebhooks to the prepareWebhooks list if they are active
* At the time of delivery if the underlying webhook is not active mark it
as "delivered" but with a failed delivery so it does not get delivered.
Fix#19220
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
So whilst #19225 fixes one issue it caused another. We need to initialise the Git
module first.
Related #19225Fix#19162
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Touch mirrors on even on fail to update
If a mirror fails to be synchronised it should be pushed to the bottom of the queue
of the awaiting mirrors to be synchronised. At present if there LIMIT number of
broken mirrors they can effectively prevent all other mirrors from being synchronized
as their last_updated time will remain earlier than other mirrors.
Signed-off-by: Andrew Thornton <art27@cantab.net>
The git command by default adds a number of global arguments. These are not
helpful to be displayed in the process manager and so should be skipped for
default process descriptions.
Signed-off-by: Andrew Thornton <art27@cantab.net>
The RepoIndexerTest is failing with considerable frequency due to a race inherrent in
its design. This PR adjust this test to avoid the reliance on waiting for the populate
repo indexer to run and forcibly adds the repo to the queue. It then flushes the queue.
It may be worth separating out the tests somewhat by testing the Index function
directly away from the queue however, this forceful method should solve the current
problem.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Change all cron tasks to make them no notice on success default. Instead if a user
wants notices on success they need to add NOTICE_ON_SUCCESS=true instead.
## ⚠️ BREAKING ⚠️
This changes the cron config so that notices on success are no longer set by default
and breaks NO_SUCCESS_NOTICE settings. Instead users who want notices on success
must set NOTICE_ON_SUCCESS=true instead.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update custom/conf/app.example.ini
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
* Add auto logging of goroutine pid label
This PR uses unsafe to export the hidden runtime_getProfLabel function from the
runtime package and then casts the result to a map[string]string.
We can then interrogate this map to get the pid label from the goroutine allowing
us to log it with any logging request.
Reference #19202
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unhelpfully Locations starting with `/\` will be converted by the
browser to `//` because ... well I do not fully understand. Certainly
the RFCs and MDN do not indicate that this would be expected. Providing
"compatibility" with the (mis)behaviour of a certain proprietary OS is
my suspicion. However, we clearly have to protect against this.
Therefore we should reject redirection locations that match the regular
expression: `^/[\\\\/]+`
Reference #9678
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately #19169 causing a panic at startup in prod mode. This was hidden by dev
mode because the templates are compiled dynamically there. The issue is that DotEscape
is not in the original FuncMap at the time of compilation which causes a panic.
Ref #19169
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately many email readers will (helpfully) detect url or url-like names and
automatically create links to them, even in HTML emails. This is not ideal when
usernames can have dots in them.
This PR tries to prevent this behaviour by sticking ZWJ characters between dots and
also set the meta tag to prevent format detection.
Not every email template has been changed in this way - just the activation emails but
it may be that we should be setting the above meta tag in all of our emails too.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Clean paths when looking in Storage
Ensure paths are clean for minio aswell as local storage.
Use url.Path not RequestURI/EscapedPath in storageHandler.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: Lauris BH <lauris@nix.lv>
Extend issues/new/choose to pass the project id and change New Issue
link on project page to use new/choose
Fix#19170
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The adoption page checks directories to see if they are repositories by querying the
db on a per user basis. This can lead to problems if a user has a large number of
repositories or putative repositories.
This PR changes the buffering to check the db in IterataeBufferSize batches instead.
Fix#19137
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately fixing changes to `mail_issue.go` did not get included in #19131.
We also need to not send issue comment mails to deactivated users.
Fix#18950
Signed-off-by: Andrew Thornton <art27@cantab.net>
Make SKIP_TLS_VERIFY apply to git data migrations too through adding the `-c http.sslVerify=false` option to the git clone command.
Fix#18998
Signed-off-by: Andrew Thornton <art27@cantab.net>
Emails should not be sent to inactive users except for Activate and ResetPassword
messages.
Fix#18950
Signed-off-by: Andrew Thornton <art27@cantab.net>
Even with #17688 email addresses that contain an initial `-` may still be present in the db and it may in future still be possible to imagine a situation whereby initial `-` are repermitted.
This PR simply updates the documentation to warn users to set their SENDMAIL_ARGS with a terminal `--` to prevent this possibility email addresses being interpreted as options.
Signed-off-by: Andrew Thornton <art27@cantab.net>
If the mailer is configured then even if Manual confirm is set an activation email
is still being sent because `handleUserCreated` is not checking for this case.
Fix#17263
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Update the webauthn_credential_id_sequence in Postgres
There is (yet) another problem with v210 in that Postgres will silently allow preset
ID insertions ... but it will not update the sequence value.
This PR simply adds a little step to the end of the v210 migration to update the
sequence number.
Users who have already migrated who find that they cannot insert new
webauthn_credentials into the DB can either run:
```bash
gitea doctor recreate-table webauthn_credential
```
or
```bash
./gitea doctor --run=check-db-consistency --fix
```
which will fix the bad sequence.
Fix#19012
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately #18642 does not work because a `*net.OpError` does not implement
the `Is` interface to make `errors.Is` work correctly - thus leading to the
irritating conclusion that a `*net.OpError` is not a `*net.OpError`.
Here we keep the `errors.Is` because presumably this will be fixed at
some point in the golang main source code but also we add a simply type
cast to also check.
Fix#18629
Signed-off-by: Andrew Thornton <art27@cantab.net>
Yet another issue has come up where the logging from SyncMirrors does not provide
enough context. This PR adds more context to these logging events.
Related #19038
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR adjusts the error returned when there is failure to lock the level db, and
permits a connections to the same leveldb where there is a different connection string.
Reference #18921
Reference #18917
Signed-off-by: Andrew Thornton <art27@cantab.net>
Repositories missing their directory should not report an error from the stats
indexer.
Close#18847
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
zeripath
