grafana/contribute/developer-guide.md

Developer guide

This guide helps you get started developing Grafana.

Dependencies

Make sure you have the following dependencies installed before setting up your developer environment:

• Git
• Go (see go.mod for minimum required version)
• Node.js (Long Term Support), with corepack enabled. See .nvmrc for supported version. We recommend that you use a version manager such as nvm, fnm, or similar.
• GCC (required for Cgo] dependencies)

macOS

We recommend using Homebrew for installing any missing dependencies:

brew install git
brew install go
brew install node@20
corepack enable

Windows

If you are running Grafana on Windows 10, we recommend installing the Windows Subsystem for Linux (WSL). For installation instructions, refer to our Grafana setup guide for Windows environment.

Download Grafana

We recommend using the Git command-line interface to download the source code for the Grafana project:

1. Open a terminal and run git clone https://github.com/grafana/grafana.git. This command downloads Grafana to a new grafana directory in your current directory.
2. Open the grafana directory in your favorite code editor.

For alternative ways of cloning the Grafana repository, refer to GitHub's documentation.

Caution: Do not use go get to download Grafana. Recent versions of Go have added behavior which isn't compatible with the way the Grafana repository is structured.

Configure precommit hooks

We use pre-commit hooks (via lefthook) to lint, fix, and format code as you commit your changes. Previously, the Grafana repository automatically installed these hook when you ran yarn install, but they are now opt-in for all contributors.

To install the precommit hooks:

make lefthook-install

To remove precommit hooks:

make lefthook-uninstall

We strongly encourage contributors who work on the frontend to install the precommit hooks, even if your IDE formats on save. By doing so, the .betterer.results file is kept in sync.

Build Grafana

When building Grafana, be aware that it consists of two components:

• The frontend, and
• The backend.

Frontend

Before you can build the frontend assets, you need to install the related dependencies:

yarn install --immutable

If you get the error The remote archive doesn't match the expected checksum for a dependency pulled from a link (for example, "tether-drop": "https://github.com/torkelo/drop"): this is a temporary mismatch. To work around the error (while someone corrects the issue), you can prefix your yarn install --immutable command with YARN_CHECKSUM_BEHAVIOR=update.

After the command has finished, you can start building the source code:

yarn start

This command generates SASS theme files, builds all external plugins, and then builds the frontend assets.

After yarn start has built the assets, it will continue to do so whenever any of the files change. This means you don't have to manually build the assets every time you change the code.

Troubleshooting: if your first build works, after pulling updates you may see unexpected errors in the "Type-checking in progress..." stage. These errors can be caused by the tsbuildinfo cache supporting incremental builds. In this case, you can enter rm tsconfig.tsbuildinfo and re-try.

Plugins

If you want to contribute to any of the plugins listed below (that are found within the public/app/plugins directory) they require running additional commands to watch and rebuild them.

• azuremonitor
• cloud-monitoring
• grafana-postgresql-datasource
• grafana-pyroscope-datasource
• grafana-testdata-datasource
• jaegar
• mysql
• parca
• tempo
• zipkin

To build and watch all these plugins you can run the following command. Note this can be quite resource intensive as it will start separate build processes for each plugin.

yarn plugin:build:dev

If, instead, you would like to build and watch a specific plugin you can run the following command. Make sure to substitute <name_of_plugin> with the plugins name field found in its package.json. e.g. @grafana-plugins/tempo.

yarn workspace <name_of_plugin> dev

Next, we'll explain how to build and run the web server that serves these frontend assets.

Backend

Build and run the backend by running make run in the root directory of the repository. This command compiles the Go source code and starts a web server.

Troubleshooting: Are you having problems with too many open files?

By default, you can access the web server at http://localhost:3000/.

Log in using the default credentials:

username	password
admin	admin

When you log in for the first time, Grafana asks you to change your password.

Build on Windows

The Grafana backend includes SQLite, a database which requires GCC to compile. So in order to compile Grafana on Windows you need to install GCC. We recommend TDM-GCC. Eventually, if you use Scoop, you can install GCC through that.

You can build the back-end as follows:

1. Follow the instructions to install the Wire tool.
2. Generate code using Wire. For example:

# Default Wire tool install path: $GOPATH/bin/wire.exe
<Wire tool install path> gen -tags oss ./pkg/server ./pkg/cmd/grafana-cli/runner

3. Build the Grafana binaries:

go run build.go build

The Grafana binaries will be installed in bin\\windows-amd64.

Alternatively, if you are on Windows and want to use the make command, install Make for Windows and use it in a UNIX shell (for example, Git Bash).

Test Grafana

The test suite consists of three types of tests: Frontend tests, backend tests, and end-to-end tests.

Run frontend tests

We use Jest for our frontend tests. Run them using Yarn:

yarn test

Run backend tests

If you're developing for the backend, run the tests with the standard Go tool:

go test -v ./pkg/...

On Windows

Running the backend tests on Windows currently needs some tweaking, so use the build.go script:

go run build.go test

Run SQLite, PostgreSQL and MySQL integration tests

By default, grafana runs SQLite. To run test with SQLite:

go test -covermode=atomic -tags=integration ./pkg/...

To run PostgreSQL and MySQL integration tests locally, start the Docker blocks for test data sources for MySQL, PostgreSQL, or both, by running make devenv sources=mysql_tests,postgres_tests.

When your test data sources are running, you can execute integration tests by running for MySQL:

make test-go-integration-mysql

For PostgreSQL, you could run:

make test-go-integration-postgres

Run end-to-end tests

Grafana uses Cypress to end-to-end test core features. Core plugins use Playwright to run automated end-to-end tests. You can find more information on how to add end-to-end tests to your core plugin in our end-to-end testing style guide

Run Cypress tests

To run all tests in a headless Chromium browser.

yarn e2e

By default, the end-to-end tests start a Grafana instance listening on localhost:3001. To use a different URL, set the BASE_URL environment variable:

BASE_URL=http://localhost:3333 yarn e2e

To follow all tests in the browser while they're running, use yarn e2e:debug

yarn e2e:debug

To choose a single test to follow in the browser as it runs, use yarn e2e:dev

yarn e2e:dev

To run the Playwright tests:

Note: If you're using VS Code as your development editor, it's recommended to install the Playwright test extension. It allows you to run, debug and generate Playwright tests from within the editor. For more information about the extension and how to use reports to analyze failing tests, refer to the Playwright documentation.

Each version of Playwright needs specific versions of browser binaries to operate. You need to use the Playwright CLI to install these browsers.

yarn playwright install chromium

To run all tests in a headless Chromium browser and display results in the terminal. This assumes you have Grafana running on port 3000.

yarn e2e:playwright

The following script starts a Grafana development server (same server that is being used when running e2e tests in Drone CI) on port 3001 and runs the Playwright tests. The development server is provisioned with the devenv dashboards, data sources and apps.

yarn e2e:playwright:server

Configure Grafana for development

The default configuration, defaults.ini, is located in the conf directory.

To override the default configuration, create a custom.ini file in the conf directory. You only need to add the options you wish to override.

Enable the development mode by adding the following line in your custom.ini:

app_mode = development

Add data sources

By now, you should be able to build and test a change you've made to the Grafana source code. In most cases, you'll need to add at least one data source to verify the change.

To set up data sources for your development environment, go to the devenv directory in the Grafana repository:

cd devenv

Run the setup.sh script to set up a set of data sources and dashboards in your local Grafana instance. The script creates a set of data sources called gdev-<type>, and a set of dashboards located in a folder called gdev dashboards.

Some of the data sources require databases to run in the background.

Installing and configuring databases can be a tricky business. Grafana uses Docker to make the task of setting up databases a little easier. Make sure you install Docker before proceeding to the next step.

In the root directory of your Grafana repository, run the following command:

make devenv sources=influxdb,loki

The script generates a Docker Compose file with the databases you specify as sources, and runs them in the background.

See the repository for all the available data sources. Note that some data sources have specific Docker images for macOS; for example, nginx_proxy_mac.

Build a Docker image

To build a Docker image, run:

make build-docker-full

The resulting image will be tagged as grafana/grafana:dev.

Note: If you use Docker for macOS, be sure to set the memory limit to be larger than 2 GiB. Otherwise, grunt build may fail. The memory limit settings are available under Docker Desktop -> Preferences -> Advanced.

Troubleshooting

Are you having issues with setting up your environment? Here are some tips that might help.

IDE configuration

Configure your IDE to use the TypeScript version from the Grafana repository. The version should match the TypeScript version in the package.json file, and is typically located at node_modules/.bin/tsc.

Previously, Grafana used Yarn PnP to install frontend dependencies, which required additional special IDE configuration. This is no longer the case. If you have custom paths in your IDE for ESLint, Prettier, or TypeScript, you can now remove them and use the defaults from node_modules.

Too many open files when running make run

Depending on your environment, you may have to increase the maximum number of open files allowed. For the rest of this section, we will assume you are on a UNIX-like OS (for example, Linux or macOS), where you can control the maximum number of open files through the ulimit shell command.

To see how many open files are allowed, run:

ulimit -a

To change the number of open files allowed, run:

ulimit -S -n 4096

The number of files needed may be different on your environment. To determine the number of open files needed by make run, run:

find ./conf ./pkg ./public/views | wc -l

Another alternative is to limit the files being watched. The directories that are watched for changes are listed in the .bra.toml file in the root directory.

You can retain your ulimit configuration, that is, save it so it will be remembered for future sessions. To do this, commit it to your command line shell initialization file. Which file this is depends on the shell you are using. For example:

• zsh -> ~/.zshrc
• bash -> ~/.bashrc

Commit your ulimit configuration to your shell initialization file as follows ($LIMIT being your chosen limit and $INIT_FILE being the initialization file for your shell):

echo ulimit -S -n $LIMIT >> $INIT_FILE

Your command shell should read the initialization file in question every time it gets started, and apply your ulimit command.

For some people, typically using the bash shell, ulimit fails with an error similar to the following:

ulimit: open files: cannot modify limit: Operation not permitted

If that happens to you, chances are you've already set a lower limit and your shell won't let you set a higher one. Try looking in your shell initialization files (~/.bashrc, typically), to see if there's already an ulimit command that you can tweak.

Getting AggregateError when building frontend tests

If you encounter an AggregateError when building new tests, this is probably due to a call to our client backend service not being mocked. Our backend service anticipates multiple responses being returned and was built to return errors as an array. A test encountering errors from the service will group those errors as an AggregateError without breaking down the individual errors within. backend_srv.processRequestError is called once per error and is a great place to return information on what the individual errors might contain.

Next steps

• Read our style guides.
• Learn how to create a pull request.
• Read about the architecture.
• Read through the backend documentation.