Chrome only uses TLS session tickets once with TLS 1.3, likely following
RFC 8446 Appendix C.4 recommendation. With OpenSSL, this works fine with
built-in session tickets, since these are explicitly renewed in case of
TLS 1.3 on each session reuse, but results in only two connections being
reused after an initial handshake when using ssl_session_ticket_key.
Fix is to always renew TLS session tickets in case of TLS 1.3 when using
ssl_session_ticket_key, similarly to how it is done by OpenSSL internally.
Line continuation as used in the syntax file might be broken if "compatible"
is set or "C" is added to cpoptions. Fix is to set the "cpoptions" option
to vim default value at script start and restore it later, see
":help use-cpo-save".
When a worker process is shutting down, keepalive is not used: this is checked
before the ngx_http_set_keepalive() call in ngx_http_finalize_connection().
Yet the "Connection: keep-alive" header was still sent, even if we know that
the worker process is shutting down, potentially resulting in additional
requests being sent to the connection which is going to be closed anyway.
While clients are expected to be able to handle asynchronous close events
(see ticket #1022), it is certainly possible to send the "Connection: close"
header instead, informing the client that the connection is going to be closed
and potentially saving some unneeded work.
With this change, we additionally check for worker process shutdown just
before sending response headers, and disable keepalive accordingly.
Linux with EPOLLEXCLUSIVE usually notifies only the process which was first
to add the listening socket to the epoll instance. As a result most of the
connections are handled by the first worker process (ticket #2285). To fix
this, we re-add the socket periodically, so other workers will get a chance
to accept connections.
The SF_NOCACHE flag, introduced in FreeBSD 11 along with the new non-blocking
sendfile() implementation by glebius@, makes it possible to use sendfile()
along with the "directio" directive.
Starting with FreeBSD 11, there is no need to use AIO operations to preload
data into cache for sendfile(SF_NODISKIO) to work. Instead, sendfile()
handles non-blocking loading data from disk by itself. It still can, however,
return EBUSY if a page is already being loaded (for example, by a different
process). If this happens, we now post an event for the next event loop
iteration, so sendfile() is retried "after a short period", as manpage
recommends.
The limit of the number of EBUSY tolerated without any progress is preserved,
but now it does not result in an alert, since on an idle system event loop
iteration might be very short and EBUSY can happen many times in a row.
Instead, SF_NODISKIO is simply disabled for one call once the limit is
reached.
With this change, sendfile(SF_NODISKIO) is now used automatically as long as
sendfile() is enabled, and no longer requires "aio on;".
Notably, NAXSI is known to misuse ngx_regex_compile() with rc.options set
to PCRE_CASELESS | PCRE_MULTILINE. With PCRE2 support, and notably binary
compatibility changes, it is no longer possible to set PCRE[2]_MULTILINE
option without using proper interface. To facilitate correct usage,
this change adds the NGX_REGEX_MULTILINE option.
With this change, dynamic modules using nginx regex interface can be used
regardless of the variant of the PCRE library nginx was compiled with.
If a module is compiled with different PCRE library variant, in case of
ngx_regex_exec() errors it will report wrong function name in error
messages. This is believed to be tolerable, given that fixing this will
require interface changes.
The PCRE2 library is now used by default if found, instead of the
original PCRE library. If needed for some reason, this can be disabled
with the --without-pcre2 configure option.
To make it possible to specify paths to the library and include files
via --with-cc-opt / --with-ld-opt, the library is first tested without
any additional paths and options. If this fails, the pcre2-config script
is used.
Similarly to the original PCRE library, it is now possible to build PCRE2
from sources with nginx configure, by using the --with-pcre= option.
It automatically detects if PCRE or PCRE2 sources are provided.
Note that compiling PCRE2 10.33 and later requires inttypes.h. When
compiling on Windows with MSVC, inttypes.h is only available starting
with MSVC 2013. In older versions some replacement needs to be provided
("echo '#include <stdint.h>' > pcre2-10.xx/src/inttypes.h" is good enough
for MSVC 2010).
The interface on nginx side remains unchanged.
If a configuration parsing fails for some reason, ngx_regex_module_init()
is not called, and ngx_pcre_studies remained set despite the fact that
the pool it was allocated from is already freed. This might result in
a segmentation fault during runtime regular expression compilation, such
as in SSI, for example, in the single process mode, or if a worker process
died and was respawned from a master process in such an inconsistent state.
Fix is to clear ngx_pcre_studies from the pool cleanup handler (which is
anyway used to free JIT-compiled patterns).
With sendfile() in threads ("aio threads; sendfile on;"), client connection
can block on writing, waiting for sendfile() to complete. In HTTP/2 this
might result in the request hang, since an attempt to continue processing
in thread event handler will call request's write event handler, which
is usually stopped by ngx_http_v2_send_chain(): it does nothing if there
are no additional data and stream->queued is set. Further, HTTP/2 resets
stream's c->write->ready to 0 if writing blocks, so just fixing
ngx_http_v2_send_chain() is not enough.
Can be reproduced with test suite on Linux with:
TEST_NGINX_GLOBALS_HTTP="aio threads; sendfile on;" prove h2*.t
The following tests currently fail: h2_keepalive.t, h2_priority.t,
h2_proxy_max_temp_file_size.t, h2.t, h2_trailers.t.
Similarly, sendfile() with AIO preloading on FreeBSD can block as well,
with similar results. This is, however, harder to reproduce, especially
on modern FreeBSD systems, since sendfile() usually does not return EBUSY.
Fix is to modify ngx_http_v2_send_chain() so it actually tries to send
data to the main connection when called, and to make sure that
c->write->ready is set by the relevant event handlers.
With sendfile in threads, "task already active" alerts might appear in logs
if a write event happens on the main HTTP/2 connection, triggering a sendfile
in threads while another thread operation is already running. Observed
with "aio threads; aio_write on; sendfile on;" and with thread event handlers
modified to post a write event to the main HTTP/2 connection (though can
happen without any modifications).
Similarly, sendfile() with AIO preloading on FreeBSD can trigger duplicate
aio operation, resulting in "second aio post" alerts. This is, however,
harder to reproduce, especially on modern FreeBSD systems, since sendfile()
usually does not return EBUSY.
Fix is to avoid starting a sendfile operation if other thread operation
is active by checking r->aio in the thread handler (and, similarly, in
aio preload handler). The added check also makes duplicate calls protection
redundant, so it is removed.
The variable contains a negotiated curve used for the handshake key
exchange process. Known curves are listed by their names, unknown
ones are shown in hex.
Note that for resumed sessions in TLSv1.2 and older protocols,
$ssl_curve contains the curve used during the initial handshake,
while in TLSv1.3 it contains the curve used during the session
resumption (see the SSL_get_negotiated_group manual page for
details).
The variable is only meaningful when using OpenSSL 3.0 and above.
With older versions the variable is empty.
Without this change, aio used with HTTP/2 can result in connection hang,
as observed with "aio threads; aio_write on;" and proxying (ticket #2248).
The problem is that HTTP/2 updates buffers outside of the output filters
(notably, marks them as sent), and then posts a write event to call
output filters. If a filter does not call the next one for some reason
(for example, because of an AIO operation in progress), this might
result in a state when the owner of a buffer already called
ngx_chain_update_chains() and can reuse the buffer, while the same buffer
is still sitting in the busy chain of some other filter.
In the particular case a buffer was sitting in output chain's ctx->busy,
and was reused by event pipe. Output chain's ctx->busy was permanently
blocked by it, and this resulted in connection hang.
Fix is to change ngx_chain_update_chains() to skip buffers from other
modules unconditionally, without trying to wait for these buffers to
become empty.
The "sendfile_max_chunk" directive is important to prevent worker
monopolization by fast connections. The 2m value implies maximum 200ms
delay with 100 Mbps links, 20ms delay with 1 Gbps links, and 2ms on
10 Gbps links. It also seems to be a good value for disks.
Previously, connections to upstream servers used sendfile() if it was
enabled, but never honored sendfile_max_chunk. This might result
in worker monopolization for a long time if large request bodies
are allowed.
On Linux starting with 2.6.16, sendfile() silently limits all operations
to MAX_RW_COUNT, defined as (INT_MAX & PAGE_MASK). This incorrectly
triggered the interrupt check, and resulted in 0-sized writev() on the
next loop iteration.
Fix is to make sure the limit is always checked, so we will return from
the loop if the limit is already reached even if number of bytes sent is
not exactly equal to the number of bytes we've tried to send.
Previously, it was checked that sendfile_max_chunk was enabled and
almost whole sendfile_max_chunk was sent (see e67ef50c3176), to avoid
delaying connections where sendfile_max_chunk wasn't reached (for example,
when sending responses smaller than sendfile_max_chunk). Now we instead
check if there are unsent data, and the connection is still ready for writing.
Additionally we also check c->write->delayed to ignore connections already
delayed by limit_rate.
This approach is believed to be more robust, and correctly handles
not only sendfile_max_chunk, but also internal limits of c->send_chain(),
such as sendfile() maximum supported length (ticket #1870).
Previously, 1 millisecond delay was used instead. In certain edge cases
this might result in noticeable performance degradation though, notably on
Linux with typical CONFIG_HZ=250 (so 1ms delay becomes 4ms),
sendfile_max_chunk 2m, and link speed above 2.5 Gbps.
Using posted next events removes the artificial delay and makes processing
fast in all cases.
The directive enables including all frames from start time to the most recent
key frame in the result. Those frames are removed from presentation timeline
using mp4 edit lists.
Edit lists are currently supported by popular players and browsers such as
Chrome, Safari, QuickTime and ffmpeg. Among those not supporting them properly
is Firefox[1].
Based on a patch by Tracey Jaquith, Internet Archive.
[1] https://bugzilla.mozilla.org/show_bug.cgi?id=1735300
The function updates the duration field of mdhd atom. Previously it was
updated in ngx_http_mp4_read_mdhd_atom(). The change makes it possible to
alter track duration as a result of processing track frames.
Hash initialization ignores elements with key.data set to NULL.
Nevertheless, the initial hash bucket size check didn't skip them,
resulting in unnecessary restrictions on, for example, variables with
long names and with the NGX_HTTP_VARIABLE_NOHASH flag.
Fix is to update the initial hash bucket size check to skip elements
with key.data set to NULL, similarly to how it is done in other parts
of the code.
Requires OpenSSL 3.0 compiled with "enable-ktls" option. Further, KTLS
needs to be enabled in kernel, and in OpenSSL, either via OpenSSL
configuration file or with "ssl_conf_command Options KTLS;" in nginx
configuration.
On FreeBSD, kernel TLS is available starting with FreeBSD 13.0, and
can be enabled with "sysctl kern.ipc.tls.enable=1" and "kldload ktls_ocf"
to load a software backend, see man ktls(4) for details.
On Linux, kernel TLS is available starting with kernel 4.13 (at least 5.2
is recommended), and needs kernel compiled with CONFIG_TLS=y (with
CONFIG_TLS=m, which is used at least on Ubuntu 21.04 by default,
the tls module needs to be loaded with "modprobe tls").
While clock_gettime(CLOCK_MONOTONIC_COARSE) is faster than
clock_gettime(CLOCK_MONOTONIC), the latter is fast enough on Linux for
practical usage, and the difference is negligible compared to other costs
at each event loop iteration. On the other hand, CLOCK_MONOTONIC_COARSE
causes various issues with typical CONFIG_HZ=250, notably very inaccurate
limit_rate handling in some edge cases (ticket #1678) and negative difference
between $request_time and $upstream_response_time (ticket #1965).
This is a recommended behavior by RFC 7301 and is useful
for mitigation of protocol confusion attacks [1].
To avoid possible negative effects, list of supported protocols
was extended to include all possible HTTP protocol ALPN IDs
registered by IANA [2], i.e. "http/1.0" and "http/0.9".
[1] https://alpaca-attack.com/
[2] https://www.iana.org/assignments/tls-extensiontype-values/
In b87b7092cedb (nginx 1.21.1), logging level of "upstream sent invalid
header" errors was accidentally changed to "info". This change restores
the "error" level, which is a proper logging level for upstream-side
errors.
The u->keepalive flag is initialized early if the response has no body
(or an empty body), and needs to be reset if there are any extra data,
similarly to how it is done in ngx_http_proxy_copy_filter(). Missed
in 83c4622053b0.
