Add meson required bits to the ci logic in the repo to be able to run
a meson build in a container.
This patch also drops several environment variables we don't need with
meson anymore.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This is just a warning, but because we're invoking rst2html5 with
--strict, it will fail at encountering a single minor issue.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
This patch enables autofill of these attributes right before launching
QEMU and thus updating the live XML.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Checks such as this one should be done at domain def validation time,
not before starting the QEMU process.
As for this change, existing domains will see some QEMU error when
starting as opposed to a libvirt error that this QEMU binary doesn't
support SEV, but that's okay, we never guaranteed error messages to
remain the same.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When the guest agent isn't running, we still report success on a PM
suspend action even though we logged an error correctly, this is because
we poisoned the 'ret' value a few lines above.
Fixes: a663a86081
Signed-off-by: Erik Skultety <eskultet@redhat.com>
#useless_use_of_cat + avoid accidental substring matches.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
With virtio-net we also need to disable the iPXE option ROM otherwise
a SEV-enabled guest would not boot. While at it, fix the full machine
XML examples accordingly.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
By default, symlink re-creation fails if the link already exists, more
specifically in case of meson-install-symlink.py:
Traceback (most recent call last):
File "/<path_to_libvirt_repo>/scripts/meson-install-symlink.py",
line 15, in <module>
os.symlink(target, link)
FileExistsError: File exists: '../default.xml' -> 'default.xml'
Unfortunately, Python can't mimic "ln -sf", so we have to fix this
differently - remove the existing link first and then try re-creating
it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
During the switch to meson, one of the patches mistakenly changed the
runtime socket prefix for {libvirtd, virtproxyd} to "libvirtd-" from
the original "libvirt-". Not to be mistaken with the systemd unit name
which actually follows the daemon name, IOW the systemd unit name
remains as e.g. "libvirtd.socket", but the actual unix socket created
on the filesystem that the daemon binds to must be named "libvirt-sock"
and not "libvirtd-sock".
Fixes: dd4f2c73ad
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Previous commit removed the last usage of the function. Drop
virQEMUCapsCompareArch as well since virQEMUCapsCacheLookupByArch was
its only caller.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, SEV is present only on AMD, so we can safely assume x86.
Secondly, the problem with looking up capabilities in the cache by arch
is that it's using virHashSearch with a callback to find the right
capabilities and get the binary name from it as well, but since the
cache is empty, it will return NULL and we won't get the corresponding
binary name out of the lookup either. Then, during the cache validation
we try to create a new cache entry for the emulator, but since we don't
have the binary name, nothing gets created.
Therefore, virQEMUCapsCacheLookupDefault is used to fix this issue,
because it doesn't rely on the capabilities cache to construct the
emulator binary name.
https://bugzilla.redhat.com/show_bug.cgi?id=1852311
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Document the CI_MAKE_ARGS and CI_CONFIGURE_ARGS so that users don't have
to skim through the Makefile to be able to pass arbitrary recognized
make targets to the build system.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
With newer pycodestyle 2.6.0 (which is part of flake8-3.8.2) reports
the following pep violation during syntax-check:
../scripts/check-remote-protocol.py:95:9: E741 ambiguous variable name 'l'
for l in err.strip().split("\n")
On all the distros we test on, this hasn't occurred yet, but with the
future update of flake8 it likely would. The fix is easy, just name the
variable appropriately.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our nwfilter code doesn't set any timeout on the pcap packet buffer which
means that when DHCP snooping is enabled on a guest interface and
libvirt is trying to learn the IP address from guest's DHCP traffic, it
takes up to 4x longer to ping a guest successfully compared to a case
where nwfilter isn't enabled at all or libvirt uses the cached nwfilter
leases to populate the corresponding rules to ebtables.
With the pcap filter and rate limiting already in place, we should be
able to afford enabling the immediate packet delivery, FWIW immediate
mode was actually the default prior libpcap-1.5.0 (CentOS 6) regardless
of whether a buffer was requested.
The lack of any kind of timeout on the pcap buffer messed with the
libvirt TCK test suite which, even with a generous timeout in place,
timeouts every single time simply because it takes a while until
guest actually starts producing any kind of traffic to fill up
the buffer in place (apart from the DHCP traffic which happens fairly
early on).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libpcap-1.5.0 introduced a function to enforce immediate mode (on all
platforms) which the follow-up patches will rely on.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is a very simple and straightforward implementation of the opposite
what buildPool does for the disk backend.
The background for this change comes from an existing test case in TCK
which does use the delete method for a pool of type disk, but it
truly could not have ever worked since the implementation simply
wasn't there for the pool of type disk.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit f4db846c32.
This patch results in the following error when trying to start
essentially any VM with default network:
unsupported configuration: QOS must be defined for network 'default'
Coverity didn't see that the bandwidth == NULL it complained about in
virNetDevBandwidthPlug was already checked properly in
networkCheckBandwidth, thus causing networkPlugBandwidth to return 0
and finish before a call to virNetDevBandwidthPlug would have been even
made.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pre-Glib era which used malloc allowed the size of the client-side
buffers to be declared as 0, because malloc documents that it can either
return 0 or a unique pointer on 0 size allocations.
With glib this doesn't work anymore, because glib documents that for
such allocation requests NULL is always returned which results in an
error in our public API checks server-side.
This patch complements the fix in the RPC layer by explicitly erroring
out on the following combination of args used by our legacy APIs (their
moder equivalents don't suffer from this):
function(caller-allocated-array, size, ...) {
if (!caller-allocated-array && size > 0)
return error;
}
treating everything else as a valid input and potentially let that fail
on the server-side rather than client-side.
https://bugzilla.redhat.com/show_bug.cgi?id=1772842
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemuDomainDefFormatBufInternal function wasn't testing whether the CPU
was actually defined in the XML and saving such a domain resulted in the
following backtrace:
0 in qemuDomainMakeCPUMigratable (cpu=0x0)
1 in qemuDomainDefFormatBufInternal()
2 in qemuDomainDefFormatXMLInternal()
3 in qemuDomainDefFormatLive()
4 in qemuDomainSaveInternal()
5 in qemuDomainSaveFlags()
6 in qemuDomainSave()
7 in virDomainSave()
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 50dfabbb59 forgot to add this important bit on how to check that
all the changes to the XML actually worked.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virsh-optparse test broke after commit 6ac402c456 because it
always assumed the max memory limit can be adjusted on a running domain
which used to be the case in the old code.
This is only a hot fix for the CI build. The proper fix here is to
re-write the whole test in a self-test/unit-test manner where we only
test virsh's ability to parse various values, not running actual
commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When commit 6ac402c456 added the API whenever VIR_DOMAIN_MEM_MAXIMUM
was passed the code always checked whether the domain was active and
therefore failed with an error even though only a config change was
requested. Fix the issue by replacing virDomainObjGetOneDef with
virDomainObjGetOneDefState which tells us what definition we're
performing the change on.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Commit d5572f62e3 forgot to add maxthreads to the non-Linux definition
of the function, thus breaking the MinGW build.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
One of the current SEV document links went dead as AMD moved the
resource to another place (document store), so there's probably very
little point in maintaining 3rd party links if the resources are being
moved.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
formatdomaincaps.html provides explanation of SEV fields, but doesn't
link to the domain XML docs to show how it can be actually used in
libvirt.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Although there's currently only support for SEV, it's likely other
solutions will appear, so we should not refer to the documentation
section simply with 'sev'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some modules/libraries within QEMU could make use of the XDG_ vars when
writing their data to the disk. Define the most common XDG variables
and point them to the specific driver's libDir, i.e.
XDG_CACHE_HOME -> /var/lib/libvirt/<driver>/.cache
XDG_DATA_HOME -> /var/lib/libvirt/<driver>/.local/share
XDG_CONFIG_HOME -> /var/lib/libvirt/<driver>/.config
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After commits e2087c2 and ec0793de older GCC started act very smart and
complain about potentially uninitialized variable, which existed prior
to these patches + even if the affected vars were left uninitialized the
function responsible for filling them in would have failed with NULL
being returned which the caller has always handled carefully.
Although GCC complained only about a single variable, let's initialize
all of them so as to prevent any further potential breakages.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Luckily, the new URL still points to the same location, the only change
is in the document name where an escaped space (%20) was replaced by an
underscore.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This is mainly about /dev/sev and its default permissions 0600. Of
course, rule of 'tinfoil' would be that we can't trust anything, but the
probing code in QEMU is considered safe from security's perspective + we
can't create an udev rule for this at the moment, because ioctls and
file system permissions aren't cross-checked in kernel and therefore a
user with read permissions could issue a 'privileged' operation on SEV
which is currently only limited to root.
https://bugzilla.redhat.com/show_bug.cgi?id=1665400
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The default permissions (0600 root:root) are of no use to the qemu
process so we need to change the owner to qemu iff running with
namespaces.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of exposing /dev/sev to every domain, do it selectively.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
SEV has a limit on number of concurrent guests. From security POV we
should only expose resources (any resources for that matter) to domains
that truly need them.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We should not give domains access to something they don't necessarily
need by default. Remove it from the qemu driver docs too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, all of the VirtioOptions are under a single <optional>
element, however, neither our parser/formatter or QEMU driver requires
the presence of all the options if only a single one from the set has
been specified, so fix it and silence the schema validator.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Before launching a SEV guest we take the base64-encoded guest owner's
data specified in launchSecurity and create files with the same content
under /var/lib/libvirt/qemu/<domain>. The reason for this is that we
need to pass these files on to QEMU which then uses them to communicate
with the SEV firmware, except when it doesn't have permissions to open
those files since we don't relabel them.
https://bugzilla.redhat.com/show_bug.cgi?id=1658112
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Since SEV operates on a per domain basis, it's very likely that all
SEV launch-related data will be created under
/var/lib/libvirt/qemu/<domain_name>. Therefore, when calling into
qemuProcessSEVCreateFile we can assume @libDir as the directory prefix
rather than passing it explicitly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
For some reason, xdr_free uses char * instead of void * for its 2nd
argument which is passed to a custom free routine. Commit
dc54b3ec missed this detail which made the build fail on a number of
platforms. Fix it by explicitly casting the object pointer to char *
just like we do in other places throughout the code base.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The QEMU validation code for graphics has been in place for a while, but
because it is only executed from virDomainDeviceInfoIterateInternal, it
was never run, since the iterator expects the device to have boot info
which graphics don't have. The unfortunate side effect of this whole mess
was that a few capabilities were missing from the test suite (as commit
d8266ebe1 demonstrated with graphics-spice-invalid-egl-headless test),
which in turn meant that a few graphics tests which expected a failure
happily accepted any failure the test runtime returned which made them
succeed. The impact of this was that we then allowed to start a domain
with multiple OpenGL-enabled graphics devices.
This patch enables iteration over graphics devices. Unsurprisingly,
a few tests started to fail as a result, so fix those too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's fairly easy to forget to add a capability to the list of
capabilities for a negative test case which might yield (for us) very
unfortunate results. Therefore, introduce negative versions of
DO_TEST_CAPS_LATEST macros, so that real QEMU caps can be used with
tests that expect a failure too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Validation of domain devices is accomplished via a generic device
iterator which takes a callback, iterates over all kinds of supported
device types and invokes the callback on every single device. However,
there might be cases when we need to alter the behaviour of the
iteration (most notably skip or include a group of devices). Therefore,
this patch introduces iterator flags.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the code was never run, it would have been very hard to spot this
mistake, especially since the compiler can't really warn about it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 255e0732 introduced a few graphics-related helpers. The problem
is that virDomainGraphicsNeedsAutoRenderNode returns true if it gets
NULL as a response from virDomainGraphicsNeedsAutoRenderNode. That's
okay for egl-headless because that one always needs a DRM render node,
the same is not true for SPICE though, and unless the XML specifies
<gl enable='yes'> for SPICE, there's no need for any renderer.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just like for SPICE, we need to change the permissions on the DRI device
used as the @rendernode for egl-headless graphics type.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just like for SPICE, we need to put the render node DRI device into the
device cgroup list so that users don't need to add it manually via
qemu.conf file.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just like for SPICE, we need to put the DRI device into the namespace,
otherwise it will be left out from the DAC relabeling process.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we need to specify the rendernode option onto QEMU cmdline, we
need this union member to retain consistency in how we build the
cmdline.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have QAPI introspection of display types in QEMU upstream,
we can check whether the 'rendernode' option is supported with
egl-headless display type.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We're going to need a bit more logic for egl-headless down the road so
prepare a helper just like for the other display types.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Up until now, we formatted 'rendernode=' onto QEMU cmdline only if the
user specified it in the XML, otherwise we let QEMU do it for us. This
causes permission issues because by default the /dev/dri/renderDX
permissions are as follows:
crw-rw----. 1 root video
There's literally no reason why it shouldn't be libvirt picking the DRM
render node instead of QEMU, that way (and because we're using
namespaces by default), we can safely relabel the device within the
namespace.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A few simple helpers that allow us to determine whether a graphics can
and will need to make use of a DRM render node.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the first step towards libvirt picking the first available
render node instead of QEMU. It also makes sense for us to be able to do
that, since we allow specifying the node directly for SPICE, so if
there's no render node specified by the user, we should pick the first
available one. The algorithm used for that is essentially the same as
the one QEMU uses.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
VFIO AP has a limitation on a single device per domain, however, when
commit 11708641 added the support for vfio-ap, check for this limitation
was performed as part of the post parse code. Generally, checks like that
should be performed within the driver's validation callback to eliminate
any slight chance of failing in post parse, which could potentially
result in the domain XML config vanishing.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Since we'll need to validate other models apart from VFIO PCI too,
having a helper for each model should keep the code base cleaner.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
There's a lot of stuff going on in src/conf/nodedev_conf which is
sometimes not directly related to config and we're not really consistent
with putting only parser/formatter related stuff here, e.g. like we do
for domains. So, let's start simply by adding a new module
node_device_util containing some of the helpers. Unfortunately, even
though these helpers tend to open a secondary driver connection and would
be much therefore better suited as a nodedev driver module, we can't do
that without pulling headers from the driver into conf/ and that's wrong
because we want conf/ to stay driver-agnostic.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
From time to time it's handy to jump directly to a function prototype in
a header. However, generating tags for headers is disabled by default in
ctags, let's enable it by using --c-kinds=+p.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since we're not saving the platform-specific data into a cache, we're
not going to populate the structure, which in turn will cause a crash
upon calling virNodeGetSEVInfo because of a NULL pointer dereference.
Ultimately, we should start caching this data along with host-specific
capabilities like NUMA and SELinux stuff into a separate cache, but for
the time being, this is a semi-proper fix for a potential crash.
Backtrace (requires libvirtd restart to load qemu caps from cache):
#0 qemuGetSEVInfoToParams
#1 qemuNodeGetSEVInfo
#2 virNodeGetSEVInfo
#3 remoteDispatchNodeGetSevInfo
#4 remoteDispatchNodeGetSevInfoHelper
#5 virNetServerProgramDispatchCall
#6 virNetServerProgramDispatch
#7 virNetServerProcessMsg
#8 virNetServerHandleJob
#9 virThreadPoolWorker
#10 virThreadHelper
https: //bugzilla.redhat.com/show_bug.cgi?id=1612009
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
So the procedure to detect SEV support works like this:
1) we detect that sev-guest is among the QOM types and set the cap flag
2) we probe the monitor for SEV support
- this is tricky, because QEMU with compiled SEV support will always
report -object sev-guest and query-sev-capabilities command, that
however doesn't mean SEV is supported
3) depending on what the monitor returned, we either keep or clear the
capability flag for SEV
Commit a349c6c21c added an explicit check for "GenericError" in the
monitor reply to prevent libvirtd to spam logs about missing
'query-sev-capabilities' command. At the same time though, it returned
success in this case which means that we didn't clear the capability
flag afterwards and happily formatted SEV into qemuCaps. Therefore,
adjust all the relevant callers to handle -1 on errors, 0 on SEV being
unsupported and 1 on SEV being supported.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Keep with the recent effort of replacing as many explicit *Free
functions with their automatic equivalents.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
In order to test SEV we need real QEMU capabilities. Ideally, this would
be tested with -latest capabilities, however, our capabilities are
currently tied to Intel HW, even the 2.12.0 containing SEV were edited by
hand, so we can only use that one for now, as splitting the capabilities
according to the vendor is a refactor for another day. The need for real
capabilities comes from the extended SEV platform data (PDH, cbitpos,
etc.) we'll need to cache/parse.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Caused by commit f7d0663d49. The problem is missing libnl library on
these platforms, so the VIR_DEFINE_AUTOPTR_FUNC has to be compiled in
conditionally.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commits 7b706f33ac and 4acb7887e4 introduced some compound type *Free
wrappers in order to use them with VIR_DEFINE_AUTOPTR_FUNC. However,
since those were not used in the code right away, Clang complained about
unused functions (static ones that are defined by the macro above).
This patch puts the defined functions in use.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Technically, it was never used ever since commit @f4d06ca8fd9 introduced
it, but the fact that we called VIR_FREE on it was enough for Clang to
never complain about it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit d48813e8 made sure we wouldn't get one for i440fx, but not for Q35
machine type. If the primary video didn't get the assumed 0:0:1.0 PCI
address, the evaluation then failed with: "Cannot automatically add a
new PCI bus for a device with connect flags 00"
https://bugzilla.redhat.com/show_bug.cgi?id=1609087
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Currently it reads:
Refer MDEV to create a mediated device on the host
...even though it resembles English, it's not a proper English.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.12, QEMU understands a new vfio-pci device option 'display'
which can be used to turn on display capabilities on vgpu-enabled
mediated devices, IOW emulated GPU devices like QXL will no longer be
needed with vgpu-enable mdevs.
QEMU defaults to 'auto' for the 'display' attribute, which is not
foolproof, so we need to play it safe here and default to display='off'
if this attribute wasn't provided in the XML explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').
This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The exit path is the same for both success and failure, so the label
should be called cleanup.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Erik Skultety