commit a58e1cb4 didn't fix the bug if the security_default_confined is
not set to 1. We now clean up even if there is no seclabel defined or
the default one.
Moving code for parsing and formatting network routes to
networkcommon_conf helps reusing those routes for domains. The route
definition has been hidden to help reducing the number of unnecessary
checks in the format function.
Vzctl man page says that --ipadd can be provided multiple times to add
several IP addresses. Looping over the configured ip addresses to add
one --ipadd for each. This would even handle the multiple IPs handled
by openvz_conf.c
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Add a default implementation of virNetDevSetIPv4Address using netlink
and libnl. This avoids requiring /usr/sbin/ip or /usr/sbin/ifconfig
external binaries.
The typical case for the problem is starting a domain needing a network
that isn't started. Even after starting the network, we get an unknown error
when starting the container.
This is due to dynamic security label not being removed.
When calling virCgroupAllowAllDevices we get these invalid entries
in the device cgroup config.
b -1:-1 rw
c -1:-1 rw
Check for positive values before outputting the major and minor to
avoid that.
Some programs want to change some values for the network interfaces
configuration in /proc/sys/net/ipv[46] folders. Giving RW access on them
allows wicked to work on openSUSE 13.2+.
Reusing the lxcNeedNetworkNamespace function to tell
lxcContainerMountBasicFS if the netns is disabled. When no netns is
set up, then we don't mount the /proc/sys/net/ipv[46] folder RW as
these would provide full access to the host NICs config.
The typical case where we had a problem is with such a filesystem
definition as created by virt-sandbox-service:
<filesystem type='bind' accessmode='passthrough'>
<source dir='/var/lib/libvirt/filesystems/mysshd/var'/>
<target dir='/var'/>
</filesystem>
In this case, we don't want to unmount the /var subtree or we may
loose the access to the source folder.
Resolving symlinks can fail before mounting any file system if one file
system depends on another being mounted. Symlinks are now resolved in
two passes:
* Before any file system is mounted, but then we are more gentle if
the source path can't be accessed
* Right before mounting a file system, so that we are sure that we
have the resolved path... but then if it can't be accessed we raise
an error.
Due to a change (or bug?) in ip link implementation, the command
'ip link add vnet0...'
is forced into
'ip link add name vnet0...'
The changed command also works on older versions of iproute2, just the
'name' parameter has been made mandatory.
If detect_scsi_host_caps reports errors but keeps libvirtd going on
startup, the user is misled by the error messages. Transforming them
into warning still shows the problems, but indicates this is not fatal.
If all features are set to default (including the capabilities policy),
but some capabilities are toggled, we need to output the <features>
element when formatting the config.
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:
<mknod state="on"/>, keep CAP_MKNOD capability
<sys_chroot state="off"/> drop CAP_SYS_CHROOT capability
Users can restrict or give more capabilities than the default using
this mechanism.
LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:
<interface type='network'>
<source network='default'/>
<guest dev="eth1"/>
</interface>
In this example the network card will appear as eth1 in the guest.
Rework the apparmor lxc profile abstraction to mimic ubuntu's container-default.
This profile allows quite a lot, but strives to restrict access to
dangerous resources.
Removing the explicit authorizations to bash, systemd and cron files,
forces them to keep the lxc profile for all applications inside the
container. PUx permissions where leading to running systemd (and others
tasks) unconfined.
Put the generic files, network and capabilities restrictions directly
in the TEMPLATE.lxc: this way, users can restrict them on a per
container basis.
Don't fail when there is nothing to do, as a tweak to the previous
patch regarding output of libvirt-UUID.files for LXC apparmor profiles
Signed-off-by: Eric Blake <eblake@redhat.com>
Tiny fix for virt-lxc-convert: we are setting memory values in bytes, while
free may give us values in a different unit by default: force free to output
bytes with -b flag.
Several function signatures changed in libselinux 2.3, now taking
a 'const char *' instead of 'security_context_t'. The latter is
defined in selinux/selinux.h as
typedef char *security_context_t;
Signed-off-by: Eric Blake <eblake@redhat.com>
See lp#1276719 for the bug description. As virt-aa-helper doesn't know
the VFIO groups to use for the guest, allow access to all
/dev/vfio/[0-9]* and /dev/vfio/vfio files if there is a potential need
for vfio
Signed-off-by: Eric Blake <eblake@redhat.com>
use_apparmor() was first designed to be called from withing libvirtd,
but libvirt_lxc also uses it. in libvirt_lxc, there is no need to check
whether to use apparmor or not: just use it if possible.
The problem with VLAN is that the user still has to manually create the
vlan interface on the host. Then the generated configuration will use
it as a nerwork hostdev device. So the generated configurations of the
following two fragments are equivalent (see rhbz#1059637).
lxc.network.type = phys
lxc.network.link = eth0.5
lxc.network.type = vlan
lxc.network.link = eth0
lxc.network.vlan.id = 5
Some of the LXC configuration properties aren't migrated since they
would only cause problems in libvirt-lxc:
* lxc.network.ipv[46]: LXC driver doesn't setup IP address of guests,
see rhbz#1059624
* lxc.network.name, see rhbz#1059630
If no network configuration is provided, LXC only provides the loopback
interface. To match this, we need to use the privnet feature. LXC will
also define a 'none' network type in its 1.0.0 version that fits
libvirt LXC driver's default.
LXC rootfs can be either a directory or a block device or an image
file. The first two types have been implemented, but the image file is
still to be done since LXC auto-guesses the file format at mount time
and the LXC driver doesn't support the 'auto' format.
This function aims at converting LXC configuration into a libvirt
domain XML description to help users migrate from LXC to libvirt.
Here is an example of how the lxc configuration works:
virsh -c lxc:/// domxml-from-native lxc-tools /var/lib/lxc/migrate_test/config
It is possible that some parts couldn't be properly mapped into a
domain XML fragment, so users should carefully review the result
before creating the domain.
fstab files in lxc.mount lines will need to be merged into the
configuration file as lxc.mount.entry.
As we can't know the amount of memory of the host, we have to set a
default value for max_balloon that users will probably want to adjust.
virConf now honours a VIR_CONF_FLAG_LXC_FORMAT flag to handle LXC
configuration files. The differences are that property names can
contain '.' character and values are all strings without any bounding
quotes.
Provide a new virConfWalk function calling a handler on all non-comment
values. This function will be used by the LXC conversion code to loop
over LXC configuration lines.
The security driver expects /etc/apparmor.d/libvirt/TEMPLATE but we
installed it to /etc/apparmor.d/libvirtd/TEMPLATE. Move the template to
the expected place since that code was here long before.
On openSuse, (and possibly other distros), tc isn't located in
/sbin/tc. To get rid of that problem, use TC constant instead of hard
coded /sbin/tc in the expected string
On openSUSE 12.x with GNUTLS 3.0.28, virnettlscontexttest fails. It has
been reported to work from GNUTLS 3.1.11 on Fedora 19. Changed the
constraints on gnutls to 3.1+ for unit test cacert4req.
Signed-off-by: Eric Blake <eblake@redhat.com>
D-bus introduced some changes in its locking code. Overriding the init
function skips the new locking init and thus crashes later in libvirt
test. Removing the function makes the test pass again.
Hitting this should be pretty rare, but at least developers will know
that they are providing a weird event ID. Otherwise for namespace that
are added in the normal way, gcc will raise a warning about unhandled
case in the switch.
Define the public API for (de-)registering network events
and the callbacks for receiving lifecycle events. The lifecycle
event includes a 'detail' parameter to match the domain lifecycle
event data, but this is currently unused.
The network events related code goes into its own set of internal
files src/conf/network_event.[ch]
Each unique event ID will thus be composed by 1 byte for the namespace
and 1 byte for a namespace-specific ID. The namespace for domain event
needs to be 0 for compatibility reasons.
Cédric Bosdonnat
Cédric Bosdonnat