The repository is now obsolete, and it never had proper GitLab CI
support anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Debian sid is currently broken on mipsel, so use Debian 10 for
that architecture; at the same time, move the ppc64le build from
Debian 10 to Debian sid to keep things balanced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The ci-* targets need to know where our container images are stored
and how they are called to work, so now that we use the GitLab
container registry instead of Quay some changes are necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using pre-built containers hosted on Quay, build
containers as part of the GitLab CI pipeline and upload them to the
GitLab container registry for later use.
This will not significantly slow down builds, because containers are
only rebuilt when the corresponding Dockerfile has been modified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a lot of repetition and makes the configuration much
easier to read.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This needs to be set for every repository for Cirrus CI integration
to work.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Right now we're dividing the jobs into three stages: prebuild, which
includes DCO checking as well as building artifacts such as the
website, and native_build/cross_build, which do exactly what you'd
expect based on their names.
This organization is nice from the logical point of view, but results
in poor utilization of the available CI resources: in particular, the
fact that cross_build jobs can only start after all native_build jobs
have finished means that if even a single one of the latter takes a
bit longer the pipeline will stall, and with native builds taking
anywhere from less than 10 minutes to more than 20, this happens all
the time.
Building artifacts in a separate pipeline stage also doesn't have any
advantages, and only delays further stages by a couple of minutes.
The only job that really makes sense in its own stage is the DCO
check, because it's extremely fast (less than 1 minute) and, if that
fails, we can avoid kicking off all other jobs.
Reducing the number of stages results in significant speedups:
specifically, going from three stages to two stages reduces the
overall completion time for a full CI pipeline from ~45 minutes[1]
to ~30 minutes[2].
[1] https://gitlab.com/abologna/libvirt/-/pipelines/154751893
[2] https://gitlab.com/abologna/libvirt/-/pipelines/154771173
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we now use Cirrus CI for macOS jobs, we no longer need to
keep Travis CI around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We use cirrus-run to trigger Cirrus CI jobs from GitLab CI jobs,
making it possible to extend our platform coverage to include
FreeBSD without having to maintain our own runners; additionally,
we'll be able to ditch Travis CI and, since results for Cirrus CI
jobs are reflected back to the GitLab CI jobs that triggered them,
we will be able to get all information from a single dashboard.
The FreeBSD and macOS job definitions can be improved further: for
example, we will want to enable caching to speed up builds, and
ultimately we should figure out a way to generate at least part of
them, notably the list of packages to be installed, using lcitool.
All of that will happen in later patches: for now, this is good
enough to start using Cirrus CI.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Until libvirt 2.5.0 we didn't have a real process for release
notes in place, and we just published the list of commits that
had made it into each release, dividing them into categories that
mostly matched the sections we use today. Those documents haven't
been relevant for years, but they're still in the git repository
and collectively take up almost 2 MiB of disk space.
Let's import the only valuable piece of information they contain,
the release date for each libvirt versions, into the current
document and then drop them for good.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of storing release notes as XML and then converting them
to HTML and ASCII at build time using XSLT and a custom script,
we can use reStructuredText as both the source and ASCII
representation and generate HTML from it using the same tooling
we already use for the rest of the documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The ASCII output our scripts produce is already very close to
reStructuredText, and with just a few extra tweaks we can get
almost all of the way there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A few new individuals have contributed to libvirt since the last
time the gitdm configuration was updated.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The primary git repository is the one on GitLab these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the name clearly implies, it's supposed to list the .html.in
files that are generated from .rst files, but it mistakenly lists
the corresponding .html files instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This format is much easier to tweak and update.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's been more than six months since we adopted GLib and we've
been pretty aggressive at replacing our homegrown APIs with more
standard ones, so by now most of the symbols mentioned in this
document haven't been around for quite a long time already.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.
On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.
This reverts commit d98cc1968e.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.
That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:
Could not initialize HostdevManager - operation failed: Failed
to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
blockdev support has been introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
replies were generated on a POWER9 machine, which is good because
we didn't have coverage of that before.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, qemucapsprobe fails when libvirt is not already installed
on the system:
$ ./tests/qemucapsprobe /path/to/qemu-system-ppc64 >/dev/null
I/O warning : failed to load external entity "/usr/share/libvirt/cpu_map/index.xml"
2020-05-06 09:49:59.136+0000: 269822: info : libvirt version: 6.4.0
2020-05-06 09:49:59.136+0000: 269822: info : hostname: [...]
2020-05-06 09:49:59.136+0000: 269822: warning : virQEMUCapsLogProbeFailure:5127 :
Failed to probe capabilities for /path/to/qemu-system-ppc64: XML error: failed to
parse xml document '/usr/share/libvirt/cpu_map/index.xml'
It would be great if the tool could work entirely out of the build
directory, and this patch achieves just that.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Debian always runs autoreconf at package build time, which means
that apt-get build-dep will bring in everything that's needed to
build libvirt from a git clone; Fedora and RHEL, however, skip
this step, so we have to install some extra packages manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is the proper way to do it according to our reStructuredText
style guidelines.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When the job monitoring logic was refactored, these two commands
were not converted properly and the result is that a successful
dump or migration (char '0') would be reported as a failed one
(int 48) instead.
Fixes: dc0771cfa2
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt depends on a ton of packages, so trying to install them
all by using the classic approach of repeatedly running configure
and reacting to each failure by installing the corresponding
missing package will inevitably lead to frustration.
Luckily there's an easy solution to get most dependencies
installed in one fell swoop, and we just need to document it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We've moved most of our CI jobs to GitLab, so we should display
the corresponding badge prominently.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The file, added with commit
commit 874952f80c
Author: Andrea Bolognani <abologna@redhat.com>
Date: Mon Apr 6 11:56:58 2020 +0200
CONTRIBUTING: Add entry point for new contributors
should be included in release archives.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Changing the introduction to bring the idea of this document better across.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The idea behind this document is to show, with actual examples,
that users should not expect PCI addresses in the domain XML and
in the guest OS to match.
The first zPCI example already serves this purpose perfectly, so
in the interest of keeping the page as brief and easy to digest
as possible the second one is removed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The section about VFIO devices is kept separate from the rest
because it's less about domain XML and guest OS disagreeing on the
PCI address of a device, and more about which of the two PCI
addresses in the domain XML is even relevant to the guest OS.
The section on zPCI addresses, on the other hand, falls squarely
in the "more complex cases" category, so it should live in the
corresponding section.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Indent all code snippets by the same number of spaces, and don't
embed the :: marker in the line preceding a code block.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Setting CC="ccache cc" works in most cases, but sometimes it will
break the build: in particular, we have experienced issues in the
past with that approach when using cgo to build our Go bindings.
A more robust approach is to have a directory containing symlinks
from the compiler name to the ccache binary: in that case, ccache
itself will invoke the compiler, and the build system will be none
the wiser.
Since libvirt-ci commit 2563aebb6c5c, container images contain a
suitable symlink directory, so all that's needed to enable the new
approach is to add this directory to $PATH.
Since we're touching this anyway, we make a few more changes:
$CCACHE_DIR is no longer created manually, because ccache will
take care of creating it for us if it doesn't already exist; the
ccache setup is moved out of the job template and into
script_variables, removing unnecessary duplication; a limit is
set on the size of the cache (500 MB, which is twice the amount
used by a fresh build on my Fedora 31 machine).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since libvirt-ci commit 27cfddee8835, paths to build tools such as
ninja and make are exported in the container's environment and can
be used directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This document describes the relationship between PCI addresses as
seen in the domain XML and by the guest OS, which is a topic that
people get confused by time and time again.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We've adopted reStructuredText as the primary markup language for
our documentation and, given that both GitLab and GitHub can render
documents in this format just fine, it makes sense to get rid of
the few last remaining bits of Markdown and standardize on
reStructuredText across the board.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Travis CI reports
root: deprecated key sudo (The key `sudo` has no effect anymore.)
so let's drop it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All information, except for osx_image image, is identical between
the two jobs so we can avoid repeating it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The newly-introduced CONTRIBUTING.rst serves the same purposes and
lives in the path where most people would look for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's generally expected that a git repository will contain this file,
which serves as an entry point for people interested in contributing
to the project.
In our case, we have extensive documentation available on the
website which we don't want to duplicate, so let's just point people
there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One new company has contributed to libvirt since the last time
the gitdm configuration was updated.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This organizes the existing contents into sections, tweaks some parts
a bit and adds links to the pages where the contents that were ripped
out of hacking.rst now live, either inline or in the catch-all "further
reading" section depending on what makes more sense.
The result is that it's now possible to consume this page, which is
the entry point for new contributors, in just a few minutes, and then
drill down further based on factors such as the familiarity with the
open source development model or mail-based workflows.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These guidelines should already be familiar to people who have
contributed to other open source projects, so it doesn't make much
sense for them to be so prominent. Move them to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is a relatively lengthy part with lots of details, which many
people who are familiar with a mail-based development workflow will
already know and which will become obsolete once we move to GitLab.
Move the contents to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This part contains a lot of useful tips, but presenting all of them
at the same time obfuscated the central message which is, 'make check'
and 'make syntax-check' must pass after each patch in a series. Let's
move them to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While it's good to have these rules written down for reference, they
apply exclusively to committers, who by definition are familiar with
the project and probably work on it daily, so there's no need to have
them front and center when a separate page will do.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This part describes entirely optional tooling, so it makes sense not
to have it advertised too prominently. Move it to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Most new contributors are probably going to modify existing code rather
than introducing all-new programs and scripts, and even when the latter
happen they'll hopefully get a feel for which programming languages are
considered acceptable for the project by looking at what's already in
the repo. Make this part less prominent by moving it to a separate page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This part represents the biggest chunk of the existing hacking.rst, and
despite that its utility is very limited because 'make syntax-check'
already guarantees most of the rules are followed over time.
Until the glorious day we finally codify our coding style completely
into a configuration for a tool such as clang-format and thus no longer
need a plain English description of it, move this part to a separate
page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This part is very specific and doesn't quite fit into the "coding
style" section, so let's move it to its own page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The conversion has been performed by using pandoc as a first pass,
and then tweaking the result manually until it looked satisfactory.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When the comment in libvirtd.sasl was last updated with
commit fe772f24a6
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 20 14:10:03 2012 -0400
daemon: Avoid 'Could not find keytab file' in syslog
it was noted that only old versions of kerberos would need the
environment variable to be set: that was more than seven years
ago, so it's safe to assume that none of our current target
platforms still requires that hack and setting the appropriate
key in the configuration file will be enough.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirtd supports this feature, and virtqemud ultimately calls to
the same code so it does as well: advertise it in the sysconf file
for the latter, as is already the case for the former.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're going to add many more later, so start by adjusting the
existing ones to more closely follow the example set by libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using systemd we want to take advantage of socket activation
instead of keeping daemons running all the time, so we default to
shutting them down after two minutes of inactivity.
At the same time, we want it to be possible for the admin to opt
out of this behavior and disable timeouts entirely. A very natural
way to do so would be to specify a zero-length timeout, but that's
currently not accepted by the command line parser. Address that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The same timeout as libvirtd can't be used for virtlogd: even with
socket activation in place, any message produced by QEMU on its
standard output/error between when virtlogd quits due to the timeout
and when it's started again due to socket activation will get lost.
This reverts commit 02b6005063
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new template provides a standardized place where environment
variables which are not static, but rather depend on the output of
some shell command, can be defined for later use. This pattern is
already used in libosinfo's GitLab CI integration.
Defining $MAKEFLAGS there means we don't need to call getconf over
and over, and the actual build steps don't end up drowned in the
noise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is the same timeout of all other daemons, and just like them
virtlogd is socket-activated, so it will automatically be started
on demand whenever that's necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few new companies have contributed to libvirt since the last
time the gitdm configuration was updated.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already have one instance of it being used in our git history,
and more are probably bound to show up eventually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As of libvirt-jenkins-ci commit e41e341f0d8f, we no longer bake
this environment variable into our container images.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two environment variables that are baked into our
cross-compilation container images at build time, $CONFIGURE_OPTS
and $PKG_CONFIG_LIBDIR: the former contain the options necessary
to convince configure to perform a cross build rather than a
native one, and the latter is necessary so that pkg-config will
locate the .pc files for MinGW libraries. Container images that
are not intended for cross-compilation will not have either one
defined.
The problem is that, while an empty $CONFIGURE_OPTS is completely
harmless, setting $PKG_CONFIG_LIBDIR to an emtpy value will
result in pkg-config not looking in its default search path, thus
not finding any library, and subsequently breaking native builds.
To work around this issue, only pass $PKG_CONFIG_LIBDIR to sudo
when the value is set in the calling environment.
Fixes: 71517ae4db
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that we treat MinGW like any other cross-build target, we
should update our Travis CI configuration.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For container images targeted at cross-building, we bake a small
amount of architecture-specific information in the environment so
that builds can work as expected without requiring additional work
from the user; unfortunately this information got lost as soon as
we called sudo. Explicitly allow it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The current documentation is fairly terse and not easy to decode
for someone who's not intimately familiar with the inner workings
of timer devices. Expand on it by providing a somewhat verbose
description of what behavior each policy will result in, as seen
from both the guest OS and host point of view.
This is lifted directly from QEMU commit
commit 2a7d957596786404c4ed16b089273de95a9580ad
Author: Andrea Bolognani <abologna@redhat.com>
Date: Tue Feb 11 19:37:44 2020 +0100
qapi: Expand documentation for LostTickPolicy
v4.2.0-1442-g2a7d957596
The original text also matched word for word the documentation
found in QEMU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Its use is limited to certain guest types, and it only supports
a subset of all possible tick policies.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new timer model will be used to control the behavior of the
virtual timer for KVM ARM/virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use this capability to detect whether the QEMU binary
supports the kvm-no-adjvtime CPU feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make sure we are taking all possible virDomainTimerNameType values
into account. This will make upcoming changes easier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Users expect to be able to configure the <console> element and see
that configuration reflected into the <serial> element or at least
sticking, however due to our crazy back-compat code that doesn't
always happen.
There's really not much we can do to make this kind of corner cases
work as the user would expect, especially not without introducing
additional complexity in a part of libvirt that already has more
than a fair share of it; we can, however, improve the documentation
so that it will nudge said users in the right direction.
https://bugzilla.redhat.com/show_bug.cgi?id=1770725
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This will be the first QEMU version that will support the
kvm-no-adjvtime CPU feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since
commit 201156ec6e
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Dec 16 10:06:50 2019 +0000
docs: add pages to support Go module package resolution
it's possible to use
import "libvirt.org/libvirt-go"
import "libvirt.org/libvirt-go-xml"
in Go programs, which will result in the Go packages being
fetched directly from libvirt.org instead of GitHub.
The godoc website offers the API documentation for the updated
imports, and that's where we should send users.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We haven't ever made releases of the Go components, which makes
sense because that's just not how that specific ecosystem works.
For people who are looking to use libvirt from Go, the brief
introductory pages located at the same URLs used to import the
packages are a better entry point than an empty directory
listing, so let's send them there instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A few new companies and individuals contributed to libvirt since
the last time the gitdm configuration was updated.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The template still references libvirt-qemu-shim, which was at one
point the name used to refer to what we now know as virt-qemu-run.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
In particular, we're interested in the following commits:
commit 43b5194d5b156f8dd7ae576952568d331978f5f0
Author: Bruno Haible <bruno@clisp.org>
Date: Sun Jan 5 20:42:12 2020 +0100
tests: Avoid GCC over-optimization caused by _GL_ARG_NONNULL attributes.
* lib/stdlib.in.h: Tweak last commit.
commit b7d7afe10ddf599452bd80b8a840c830cd474b09
Author: Bruno Haible <bruno@clisp.org>
Date: Sun Jan 5 09:13:25 2020 +0100
tests: Avoid GCC over-optimization caused by _GL_ARG_NONNULL attributes.
Reported by Jim Meyering in
<https://lists.gnu.org/archive/html/bug-gnulib/2020-01/msg00040.html>.
* lib/stdlib.in.h (GNULIB_defined_canonicalize_file_name): New macro.
(GNULIB_defined_ptsname_r): New macro.
* tests/test-canonicalize.c (_GL_ARG_NONNULL): Define to empty.
(main): Disable the NULL argument test if canonicalize_file_name does
not come from gnulib.
* tests/test-canonicalize-lgpl.c (_GL_ARG_NONNULL): Define to empty.
(main): Disable the NULL argument test if canonicalize_file_name does
not come from gnulib.
* tests/test-ptsname_r.c (_GL_ARG_NONNULL): Define to empty.
(test_errors): Disable the NULL argument test if ptsname_r does not come
from gnulib.
since they fix a build failure caused by the gnulib tests failing
on ppc64le, as reported in
https://www.redhat.com/archives/libvir-list/2020-January/msg00616.html
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Tracked-down-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Some were in the wrong section, some in the wrong version.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Andrea Bolognani