* badram: Make DEFAULT_MASK depend on ARCH_BITS, not x86_64 architecture.
* badram: Don't display leading zeros for BadRAM addresses.
* badram: Merge patterns immediately when there is no additional cost.
The current algorithm only starts merging patterns when num_patterns
equals MAX_PATTERNS, which can lead to having several patterns that
could have been merged into one at no additional cost. e.g.
patterns = [
(0x00, 0xfffffffffffffff8),
(0x08, 0xfffffffffffffff8)
]
can appear, even though
patterns = [
(0x00, 0xfffffffffffffff0)
]
represents the exact same addresses at the same cost.
So, at the same time as we test whether an address is already covered,
also check if we can cheaply combine the new address with an existing
pattern.
* badram: Factor out code that wraps to a new line when necessary.
In preparation for next commit.
* badram: Add more modes for recording/displaying error maps.
The original code just supported recording and displaying patterns suitable
for use with the Linux BadRAM extension or GRUB badram command. With some
minor changes it can be made to record address ranges and display them
either in the format used by the Linux memmap boot command line option
or as a simple list of memory page numbers (which can be used with the
Windows bcdedit program).
* badram: Increase the number of stored patterns/ranges.
* Update README to include the new error reporting modes.
* efisetup: Ignore Unicode byte-order mark in command line
References #418
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
* doc: Command line parameters for QEMU auto-start
The use of 0x0 instead of 0 is because of a bug in the TianoCore EDK-II
bcfg tool. Also the need to escape the " quotes with ^ seems like
another bug.
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
---------
Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
* system/loongarch: Add 64-bit PCIe memory space mapping
Added the 64-bit PCIe memory space mapping. From 0x8000000000ULL to
0xFD00000000ULL are LoongArch 64-bit PCIe memory spaces and need to be
mapped.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/loongarch: Optimization timer on LoongArch
Since some LoongArch64 CPUs stop the performance counters when ilde, the
running time displayed on the screen is incorrect.
Using stable counter can solve this problem, so remove the performance
counters time, and add stable counter time.
Signed-off-by: Chao Li <lichao@loongson.cn>
---------
Signed-off-by: Chao Li <lichao@loongson.cn>
In LoongArch, the addresses from 0x30000000 to 0x80000000 are 32-bit PCI
memory space, If the BAR happens start at 0x30000000, a mapping error
will occur according to the old logic, and 0x30000000 should also be
mapped, so fix it.
Signed-off-by: Chao Li <lichao@loongson.cn>
* Add CPUID detection for MTL & ARL CPUs
* Add support for ARL SMBus Controler
Add PCI Device polling on Bus 0x80 (instead of fixed 0x00)
Solve issue with DDR5 SPD Bank switching when SPD Write is disabled (using Proc Call)
* Add Live Freq/Timings IMC Polling for Intel MTL & ADL CPUs
* Correct K8 Rev G detection
Fix#361 (PR hijacking)
The x86_64 SysV calling convention does not require r8-r11 to be
preserved by the callee. So we need to save and restore them in the
low-level interrupt handling code in case the C interrupt() function
uses them.
* lib/assert: Add LoongArch assert support
Added LoongArch break 3 assert instruction.
Signed-off-by: Chao Li <lichao@loongson.cn>
* lib/barrier: Add barrier method for LoongArch
Added LoongArch barriers in barrier_spin_wait and barrier_halt_wait
functions.
Signed-off-by: Chao Li <lichao@loognson.cn>
* lib/spinlock: Add LoongArch CPU pause
Because the LoongArch haven't pause instruction, using eight nops to
replace the pause.
Signed-off-by: Chao Li <lichao@loongson.cn>
* lib/string: Make LoongArch use the string function in the file
Since LoongArch GCC doesn't have built-in string functions, use the
string function instance in the sting.c
Signed-off-by: Chao Li <lichao@loongson.cn>
* lib/unistd: Add LoongArch CPU pause
Because the LoongArch haven't pause instruction, using eight nops to
replace the pause.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/acpi: Reduce the way of search RSDP for non-x86 ARCHs
Searching RSDP from legacy BIOS EDBA and reserved areas is available
only on i386 and x64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/cache: Add LoongArch64 cache operations support
Added cache operations support for LoongArch64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/cpuid: Add the compile limit
Make the `cpuid` function action only on i386/x64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/heap: Add heap support for LoongArch64
LoongArch64 uses the low 256MB as the low memory.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/memrw: Add 8-bit and 16-bit memory operations
Added 8-bit and 16-bit memory access operations, which 8-bit uses
`movb` and 16-bit is `movw`.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/memrw: Add LoongArch memory access operations
Added 8/16/32/64-bit memory access operations for LoongArch64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system: Add Loongson PCI vendor ID and Loongson 7A chipset EHCI workaround
1. Added Loongson PCI vendor ID.
2. Added Loongson 7A chipset ECHI workaround.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/io: Add LoongArch64 IO port operations
Added IO port operations for LoongArch64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/reloc64: Add LoongArch64 relocations support
Added R_LARCH_RELATIVE and R_LARCH_NONE relocations support for
LoongArch64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/serial: Add Loongson CPU serial port support
Add the serial port address perfix of Loongson CPU and obtain serial
port clock method.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/smbus: Rename smbus.c to i2c_x86.c
Renamed the smbus.c to i2c_x86.c in i386 and x64 platforms.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/smp: Add LoongArch SMP support
Added LoongArch multi-core support and a way of map to node numbers if
the NUMA is enabled.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/timers: Add LoongArch supports
In LoongArch, there is a stable counter that is independent of other
clocks, it like the TSC in x64. Using it to count the ticks per
millisecond.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/tsc: Add LoongArch support
Usually the frequency of stable counter is not same to CPU frequency, so
using the performance counter for the delay operations.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/usbhcd: Add LoongArch MMIO perfix
Added LoongArch64 MMIO address perfix, use for address the PCI memory
space.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/usbhcd: Add Loongson 7A2000 chipset OHCI BAR offset fix
If the BAR address is not fixed for the Loongson 7A2000 OHCI controller,
some prots will not be usable, This change currently only affects the
LoongArch platform.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system: Add the way to IO access via MMIO
Usually, it is access the IO like PCI IO via MMIO on non-X86 ARCHs, so
a method to access IO via MMIO is added.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system: Add the way to access PCI memory space via MMIO
Some uniformly address ARCHs access the PCI memory depended the MMIO, so
the method to access PCI memory via MMIO is added.
Signed-off-by: Chao Li <lichao@loongson.cn>
* app: Add LoongArch version support
Reduced the version field by two characters to support ARCH name
abbreviations with more than three characters, and added "la64" ARCH
version display.
Singed-off-by: Chao Li <lichao@loongson.cn>
* test/block_move: Add block move test via ASM for LoongArch
Add block move test inline assembly instance for LoongArch.
Signed-off-by: Chao Li <lichao@loongson.cn>
* test/mov_inv_fixed: Add LoongArch ASM version word write operation
Add LoongArch ASM version word write cycle if it uses the HAND_OPTIMISED.
Signed-off-by: Chao Li <lichao@loongson.cn>
* boot: Adjust the AP stack size for LoongArch
LoongArch exception will store all of the GP, FP and CSR on stack, it
need more stack size, make LoongArch AP using 2KB stack size.
Signed-off-by: Chao Li <lichao@loongson.cn>
* boot/efisetup: Add LoongArch CPU halt instruction
Add "idle 0" for LoongArch
Signed-off-by: Chao Li <lichao@loongson.cn>
* boot/efi: Limiting the ms_abi using scope
Make the ms_abi only work on i386 and x64.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/imc/loongson: Add Loongson LoongArch IMC support
Added the Loongson LoongArch CPU IMC instance, support read out the IMC
sequence, currently only supports reading MC0.
Signed-off-by: Chao Li <lichao@loongson.cn>
* app/loongarch: Add intrrupt handler for LoongArch
Added the LoongArch IRQ handler support.
Signed-off-by: Chao Li <lichao@loongson.cn>
* system/loongarch: Add LoongArch ARCH specific files
Added LoongArch ARCH specific files: cpuid.c, cpuinfo.c, hwctrl.c,
memctrl.c, temperature.c, vmem.c, registers.h
They use the same pubilc API for i386 and x64 platforms.
Signed-off-by: Chao Li <lichao@loongson.cn>
* boot: Add LoongArch startup and header
Added the header.S and startup64.S for LoongArch, CPU works on:
1. Page mode.
2. Load and store is cacheable.
3. Instructions is cacheable.
4. DMWn 0 and 1 is used.
5. To access non-cacheable areas, use the perfix 0x8000000000000000.
Signed-off Chao Li <lichao@loongson.cn>
* build64/la64: Add LoongArch64 build files
Add infrastructure files to build memtest86 plus for LoongArch64
platform.
Signed-off-by: Chao Li <lichao@loongson.cn>
* workflows: Add LoongArch64 CI supports
Adjust workflow logci, remvoe 32 and 64 wordsize, replace with "i386,
x86_64 and la64", add LoongArch64 build CI check.
Signed-off-by: Chao Li <lichao@loongson.cn>
---------
Signed-off-by: Chao Li <lichao@loongson.cn>
Signed-off-by: Chao Li <lichao@loognson.cn>
The EFI image .text section is taken from memtest_shared.bin, which is
a combined code and data section. Some recent UEFI BIOSs set the page
protection attributes when loading EFI images, so we need to mark this
section as both executable and writable to prevent page faults.
Fixes issue #413 and should fix issue #377.
* Split SPD parsing and printing code from smbus.c to spd.c
Move all SPD parsing and printing code from smbus.{c,h} to spd.{c,h}.
Introduce parse_spd() function, moving the parse_spd_* selection logic
from print_smbus_startup_info(), allowing to keep parse_spd_* static.
Remove static from get_spd() and update print_smbus_startup_info()
to use parse_spd() which also simplifies the code flow.
Move LINE_SPD into display.h and rename it to ROW_SPD. Update print_spdi()
to use explicit row number where the SPD info needs to be printed.
Rename ram_info into ram_info_t, rename print_smbus_startup_info()
into print_spd_startup_info.
Do not initialize ram.freq to 0, this is the initial value already.
Do not set curspd.isValid to False, the first thing that parse_spd()
does is setting the entire struct to 0, that also sets isValid to False.
print_spd_startup_info() from smbus.c is technically a skeleton now
so each arch can have its own version, adjusted as needed. Once
LA64 changes land, we can think how we can even make it arch agnostic.
* Add -fexcess-precision=standard to CFLAGS for build(32,64)/Makefile
Recent switch from -std=c11 to -std=gnu11 done in 53ca89f ("Add
initial NUMA awareness support") introduced a regression in SPD
parsing code (and potentially in other places) due to change of
floating point precision. Restore the original behavior by
adding -fexcess-precision=standard to CFLAGS.
Bug: https://github.com/memtest86plus/memtest86plus/issues/425
Fixes: 53ca89f8ae
Added a new CC flag into build32 and build64 Makefiles to distinguish
whether compiling to 32-bit or 64-bit code.
[Lionel Debroux: rebased on the memrw functions refactor.]
Signed-off-by: Chao Li <lichao@loongson.cn>
Added LoongArch32, LoongArch64 machine numbers, which are defined in Microsoft PE SPEC.
[Lionel Debroux: added RISC-V 32, RISC-V 64, RISC-V 128 PE machine numbers as well, since we already have the ARM machine numbers anyway.]
Signed-off-by: Chao Li <lichao@loongson.cn>
Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
People creating the media through File System Transposition [1] rather than DD
copy may end up with a media that uses a GPT partition table rather than MBR.
So add GPT support to GRUB, as a low cost beneficial change.
For reference, File System Transposition is the default method used by Rufus
and other utilities for creating bootable media from an ISO, and it allows
users to select GPT instead over MBR, in which case memtest86+ will not boot.
[1] https://lists.gnu.org/archive/html/grub-devel/2022-06/msg00024.html
The existing algorithm both read and wrote data beyond the end of the
array and, when moving data, moved it in the wrong direction. Replace
it with a bog-standard insertion sort algorithm. The resulting code
is smaller and probably faster, as memmove() is not in-lined.
* Add a file containing useful macro definitions, currently a single top-level macro for obtaining the size of an array; use it to replace a sizeof(x) / sizeof(x[0]) construct in system/smbus.c . This requires switching the GCC build mode from C11 to C11 with GCC extensions.
* Initial NUMA awareness (#12) support: parse the ACPI SRAT to build up new internal structures related to proximity domains and affinity; use these structures in setup_vm_map() and calculate_chunk() to skip the work on the processors which don't belong to the proximity domain currently being tested.
Tested on a number of 1S single-domain, 2S multi-domain and 4S multi-domain platforms.
SKIP_RANGE(iterations) trick by Martin Whitaker.
This was mentioned in the individual test descriptions in the README,
but easily missed (issue #384). Add a note in the BadRAM section of
the README and also in the error display heading.
* Add boot option to rotate screen display through 90 degrees.
Some machines have a detachable display that can be used in either
portrait or landscape orientations, and require software to rotate
the displayed image accordingly. There is no way to detect the
current orientation through the BIOS, so provide a boot option to
control this. Hopefully we only need to support one (+90 degree)
angle.
Note that the rotate option only works in graphical mode. When booted
by a legacy BIOS using text mode, we have to rely on the BIOS to do
what's necessary.
* Extend boot command line options for display screen control.
Replace "rotate" option with "screen.rhs-up" and "screen.lhs-up" to
allow rotation in either direction. Add a "screen.mode=<w>x<h>"
option to set a preferred width <w> and height <h> for the UEFI
frame buffer. Also allow "screen.mode=bios" to use the default
UEFI frame buffer resolution.
* Add more debug output for EFI frame buffer mode.
* Replicate command line parsing of screen options in efisetup.c.
Trying to do it only once in screen.c didn't work, because static
variables initialied to zero are placed in the bss section, and we
don't zero the bss section until after efisetup() is executed.
The resulting code is in fact smaller, because the compiler can
optimise better when everything is local.
* Add a boot command line option for efisetup debug.
* Improve EFI debug test screen pattern.
* Document the new screen and efidebug boot command line options.
* Fix typo in README.
* Initial commit for ECC support. Preliminary support for AMD Zen.
* Clear ECC registers at startup
* Add config flag (enable_ecc_polling) to toggle ECC polling. (Currently disabled by default for v7 release)
* Optimize the JEP106 list by using __attribute__((packed)) to remove padding. The x86 & x86_64 series support unaligned accesses just fine, after all, and this is not remotely a hot path.
* Optimize several string-related constructs by switching to fixed-length char arrays, which avoids pointers + relocations.
* app/interrupt.c: array of different-length strings, but most of those are lengthy enough for this to be a clear win, especially on x86_64;
* system/usbhcd.c: array of same-length strings;
* tests/tests.h: array of structs containing same-length strings.
* Reduce the size of the list of tests by using a narrower type for the cpu mode, which reduces padding.
* cpuinfo: Add support for Vortex86
Hardcode cache for family 5, use CPUID cache info for family 6.
* cpuinfo: Add support for Vortex86EX
The EX does not have brand string so hardcode name and cache.
* In determine_cache_size(), add an additional test to ensure that only
Vortex86 CPUs are handled, allowing Zhaoxin CPUs to fall through.
Also, remove the no_temperature var to keep only the enable_temperature flag
Older Atom still have the enable_temperature flag hard-coded to false until further tests are done
* Make sure the build workflow actually uses the chosen compiler.
Also clean up the repetitive nature of the workflow by defining the word
size as another matrix axis and making iso the default target.
Signed-off-by: Kimon Hoffmann <Kimon.Hoffmann@lawo.com>
* Disabled clang as a compiler alongside gcc.
The state of the current makefiles/source code is not compatible with
clang, so it makes no sense to try to build with it.
Signed-off-by: Kimon Hoffmann <Kimon.Hoffmann@lawo.com>
